Search results: disassembly

Sort order

116 models

P
PrintablesPolymorphic

Build Tray — Modular Organizer for Assembly, Disassembly and Maintenance

Build Tray is a modular organization system designed for makers, tinkerers, technicians, repair enthusiasts and anyone who needs to keep small parts under control while working on a project. It was created to help organize components…

Downloads
29,114
Likes
9,791
Rating
4.84
P
Printablesorax

Spudger Set (Electronic Disassembly Tools)

Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…

Downloads
5,484
Likes
859
Rating
4.95

Screw Organizer Box for Repairs & Disassembly

🧰 Screw Organizer Box for Repairs & Disassembly 📦 Description This 3D-printed screw organizer is designed to help you keep screws, bolts, washers, and small components neatly sorted while working on electronics, machines, or furniture.…

Downloads
2,208
Likes
711
Rating
5
P
PrintablesThe Rookie

Disassembly drone Tail and some other stuff! (MURDER DRONES)

You can get a wire to attach the tail to the waist and might need a little drill to make a hole as the same size as the wire you use. You can do the same for the wire that is attached to the spike (I don't know the name of the thing ) to…

Downloads
1,416
Likes
94
Rating
5
P
PrintablesMatvei

MGN9 MGN12 block/carriage disassembly helpers

Lets you slide the block off the rail and put it back easily. Tested them with Magicphoenix MGN9H and genuine Hiwin MGN12H blocks and they fit perfectly. Print as-is (on the side) with default settings and make sure you don't have an…

Downloads
1,107
Likes
85
Rating
5
P
PrintablesAmbrosia

MGN9 MGN12 block/carriage disassembly helpers with stop

A remix that adds a stop to one end of the rail. So the carriage can only be removed from one end, and will not fall off the other. Print on their side, as per the original. I found the MGN9 rail was slightly too loose, and the MGN12 was…

Downloads
862
Likes
88
Rating
5
P
PrintablesUser0180

car disassembly tool set

This is a printable car disassembly tool set of 5 tools.

Downloads
741
Likes
86
Rating
5
P
PrintablesEC

Prusa Core One and One L Z-Axis Dust Cover - No Disassembly Required

Prevents dust and filament debris from entering the Z-axis holes, protecting the mechanism. Three guards are required per printer. If printed in a textured sheet, the guard is almost invisible. Key Features: Protects Z-axis: Prevents dust…

Downloads
629
Likes
150
Rating
4.9
P
PrintablesLerry

Tikka T3x Bolt Disassembly tool (Updated)

A tool I made years ago but remade now that I know how to actually CAD correctly. This is a tool helps you take the end cap off as well as ‘cock’ the striker so you can put the bolt back in your rifle since the spring inside can be rather…

Downloads
604
Likes
30
Rating
5
P
PrintablesRat_Patrol

AR Bolt Assembly/Disassembly Jig

I beefed up Obsessed's jig to eliminate model flex in case you are tightening the jig maybe more than you should for whatever reason. I also cut some “top hole reliefs” on the openings for the threaded insert from perfectly round to…

Downloads
547
Likes
88
Rating
5
P
PrintablesScherzherzog

Disassembly Tray / Small parts tray

Small tray for sorting things e.g. screws. No special print requirements. Recommended infill ≥ 10% Added a second version with chamfers instead of rounded corners. Should work without support.

Downloads
505
Likes
80
Rating
4.88

Parametric 16 Valve Engine Head Disassembly Tray / Parts Organizer

I wanted one of these trays for a project and noticed they cost a small fortune to buy online. It's just a simple plastic organizer so I decided to make my own. The provided default values are to fit a Toyota 5S-FE but if you know the…

Downloads
491
Likes
29
Rating
5
P
Printablesminimale

Oil Filter Disassembly Tool Piaggio Vespa Gts and more - chiave filtro olio piaggio vespa

Perfect and simple Oil Filter Disassembly Tool for Piaggio Vespa Gts and more. Ø 50x67 mm for PIAGGIO Leader Quasar LEM for Vespa ET4 LX LXV S Primavera Sprint GTS GTS Super GTV GT 60 GT GT L 946 125-300ccm 4T AC LC

Downloads
438
Likes
33
Rating
5
P
PrintablesJohnsonium

Magnetic Parts Tray for Assembly/Disassembly (Multiple Sizes & Non-Magnetic Versions Included)

Problem I am often working on laptops or other small electronic devices that involve lots of screws and small parts in the disassembly/assembly. I had used large dish-type magnetic parts trays before but this can cause problems when there…

Downloads
417
Likes
288
Rating
5
P
PrintablesGiulio Librando

DJI Disassembly Gimbal Tool for DJI Mavic 2 Air 2/2S Mini 1/2/SE

A tool needed to remove the rivets to replace the gimbal arm pieces. Sold on Alixpress (https://it.aliexpress.com/item/1005004380252138.html) at 80$, i decided to recreate it by myself (hopefully you'll need it just once). Must be printed…

Downloads
400
Likes
61
Rating
5
P
PrintablesMMDeveloper

1911 Easy Wrench Disassembly & Reassembly (extended barrel compatible)

This works on the Govt models and quite possibly the Commander models, definitely not the Officer model. I only have access to the Govt models. I saw a product online and decided to improve on it and make it safer. You are no longer…

Downloads
357
Likes
41
Rating
5
P
PrintablesDehydratedWater

Fairphone 6 Replacement Volume Button (Drop-In, No Disassembly)

Since there are no replacement buttons available for the Fairphone 6 - and the original button is hard to access - I designed this drop-in replacement. It fits well, feels almost identical to the original, and installs without opening the…

Downloads
350
Likes
18
Rating
5
P
PrintablesTallat Mehmood

Electronics Disassembly & Screw Organizer Tray

The Ultimate Teardown Companion Whether you are repairing a smartphone, tearing down a laptop, building a custom keyboard, or working on RC gear, keeping track of different screw lengths and tiny components is the hardest part of the job.…

Downloads
350
Likes
145
Rating
5

Parametric Small Parts Organizer Tray for Disassembly

I needed a part organizer that I could use for things like doing maintenance on my printer. Ideally, I'll remember to place small screws and such in each bin sequentially during disassembly, so I'll be able to just reverse the order and…

Downloads
342
Likes
45
Rating
4.6
P
PrintablesSpencer Witte

Disassembly Tool for Glock Magazines.

This is a tool to help you open the bottom of glock OEM magazines for servicing, those little locking tabs are so stupid! It was a quick and dirty mod given I only had the stl to work with, but it turned out ok. I uses one M3 15mm. Still…

Downloads
312
Likes
36
Rating
5
P
PrintablesMittens

Dyson v8 Wall Mount Hanger - No disassembly, Top side facing outward

This mount enables hanging the Dyson V8 in a vertical orientation with the dust bucket against the wall and the ‘pretty’ side of the vacuum facing out. The mount is all one piece attached to walls with 4 counter-sunk screws. There's no…

Downloads
262
Likes
41
Rating
5
P
Printablesinnercube

MGN7 linear rail - carriage disassembly helper (e.g. for Chaoticlab Voron Tap v2)

I used it to slide the carriage block of the MGN7 linear rail for cleaning and lubrication without losing any beads. In my particular case, I used it on the Chaoticlabs Voron Tab V2, but it should work on any MGN7 rail. There is a stop at…

Downloads
253
Likes
14
Rating
5
P
PrintablesMasiinatek

Tikka T1x Bolt Disassembly Tool

Available as a free STL download Go to my website at masiinatek.com for purchase as an already printed part. There are three geometries in the block that interact with your bolt: Hole for the bolt face. Use to de-cock and re-cock and to…

Downloads
238
Likes
10
Rating
0
P
Printablescoloradoruss

Glock Gen 5 Magazine Disassembly Tools

Taking apart a Glock mag is a nightmare. This allows it to be disassembled pretty easily. The C shaped tool wraps around the mag. It is so hard to push in that I had to grab it with channel lock pliers and gently push in the release the…

Downloads
236
Likes
29
Rating
4
P
Printablesjnleroux

Philips Sonicare Disassembly Tool

Has your Sonicare toothbrush stopped working properly. Does it sound like it's shaking itself apart. If so, repair is simple, with the right tools. Grab yourself a small Phillips screw driver, a couple of hot gun glue sticks (no glue gun…

Downloads
169
Likes
9
Rating
0
P
Printablesdm

Tube for Hadley telescope metric version (no disassembly or re-print needed)

** You do not need to disassemble your telescope. The tubes slide between two rods when you squeeze them gently. The tubes can be screwed together and they are helpful since you can customize the height of the tube to fit your build. The…

Downloads
163
Likes
32
Rating
5
P
PrintablesJakob

MK2 - MK2.5S Y-Axis Belt tensioner idler pulley- no threaded rod disassembly!

Only open one nut and push the original idler aside to make space for the new one.

Downloads
152
Likes
19
Rating
5
P
PrintablesRodLS

SilencerCo Sparrow Disassembly Tool

Infill: 100% for rigidity Filament material: PLA or other rigid material

Downloads
149
Likes
6
Rating
5
P
PrintablesEric

Slip-on Dial Indicator Mount for Prusa Mk3s - No Modification or Disassembly Needed!

Simple dial indicator mount which slides on to the extruder motor and does not require any modification to the printer. Simply print the part, bolt the indicator to it, then slide it on your extruder motor. There is a spot for an extra…

Downloads
144
Likes
22
Rating
4.33
P
PrintablesMarcello

osVAC F32 to Parkside PPWD 30 B2 Vacuum Adapter - No Disassembly Needed - Strong

his adapter connects osVAC F32 tools directly to Parkside PPWD 30 B2 vacuums with a robust, reinforced clip design that slides onto the original hose without disassembly—unlike many alternatives requiring hose teardown. The extra-stable…

Downloads
135
Likes
19
Rating
0
P
Printablessmax

CZ 452/455 Bolt Disassembly and Reassembly Tool

This tool allows you to easily disassemble and reassemble the bolt of a CZ 452 or 455 rimfire rifle. A major improvement over other designs is simplified reassembly. No more fighting parts under spring tension to get the bolt back…

Downloads
135
Likes
3
Rating
0
P
Printablesslajob

Gridfinity disassembly organizer / Screw order mat

Organize your screw and parts during dissassembly with not losing right order. Rounded corners makes getting parts from organizer easier

Downloads
134
Likes
22
Rating
5
P
Printablesmmc

CZ 455 and 452 Bolt Disassembly Tool

This is a quick tool I designed which makes it much easier to disassemble and reassemble the bolt of a CZ 455. I have not tested it with a 452 but it will likely work since the design is the same. It will not help you with a 457, but the…

Downloads
126
Likes
5
Rating
0
P
Printablessteelrat.edc

Disassembly Jig for Victorinox 84mm & 91mm Swiss Army Knives

A disassembly jig to easily drill out the rivets on a flat surface. The cutout is for the corkscrew/phillips-screwdriver. Can be used on both sides, but depending on your nozzle and settings you might have to change the diameters on the…

Downloads
125
Likes
15
Rating
5
P
PrintablesCanape511

Lock disassembly tray LPL style

I followed the style of the tray that LockPickingLawyer uses in his videos. Print settings: Any default profile should be fine, but I recomend 0.20mm layer height for smoother fillets. 15% Infill No suports

Downloads
122
Likes
69
Rating
5
P
PrintablesAlainT

Coupelles partitionnées empilables pour pièces et vis lors d'un démontage - Stackable Partitioned Trays for parts and screws during disassembly

Coupelles empilables carrées de 8 cm de côté pour déposer pièces et vis lors d'un démontage. Category: DIY

Downloads
121
Likes
11
Rating
4.5
P
PrintablesPanikraum

UGLY: Shower Head [Easy disassembly for cleaning]

Are you sick of having a dirty and ugly-looking shower head from the hardware store? Well, now you can have just an UGLY: shower head! This gadget is designed to be easy to print and assemble. Print in PETG or PLA without support and use…

Downloads
119
Likes
20
Rating
0
P
PrintablesnCeon

Spoke Protector, No Disassembly Required (Flexible Filament)

When printed in flexible filament, the slit allows you to put this between the drive-train and wheel without disassembly. Much more robust and better looking than the original clear yellowing one. I printed mine out of 98A hardness TPU to…

Downloads
118
Likes
13
Rating
0
P

Elegoo Neptune 4 Pro (+others?) Bed Screw Lock (no disassembly required)

Apply these to your bed screws after leveling to prevent them from loosening. Insert the big thingy (try not to move the screw). Push the two pins through the holes to keep the big thingy in place (you can skip this, but mine tends to pop…

Downloads
116
Likes
8
Rating
0
P
PrintablesDawid Kułak

Modular Screw & Small Parts Organizer Tray for Equipment Disassembly

Keeping track of tiny screws and components during an equipment disassembly project can be a nightmare. I designed this modular organizer tray to solve that exact problem and keep the workspace completely clear. Designed with precise cell…

Downloads
107
Likes
34
Rating
0
P
PrintablesMastermindPT

Screw tray for electronics disassembly

When you need to disassemble any electronic equipment, normally you end up with a pile of assorted screws, this tray helps to keep things organized, preventing the "extra screws" to show when you put everything back together. The tray is…

Downloads
105
Likes
7
Rating
0
P
PrintablesKert

AKG K7xx Elastic Replacement *No Modification or Disassembly*

This is a clip in bracket to replace the worn out elastic for an AKG K7xx (701/702/712/others) series headphone. Requires no disassembly, modification, cutting, gluing, etc. It is designed for a hair elastic (ponytail elastic) of about…

Downloads
103
Likes
14
Rating
0
P
PrintablesRG

Bike Front Cap wrench Disassembly tools 12T

Layer height 0.2 Material ASA

Downloads
98
Likes
8
Rating
0
P
PrintablesMaxPC10

Cat Tree Support Bracket - Easy to Install, No Disassembly Required!

Do you want to add extra stability to your cat tree without the hassle of taking it apart? This 3D printed Cat Tree Support Bracket is the perfect solution! This bracket is designed specifically for 75mm tubes and comes in two parts,…

Downloads
98
Likes
31
Rating
0
P
PrintablesWard Morrison

Small Stackable Screw Tray (For Disassembly of Laptops, Consoles, Phones, etc)

I designed a stackable 4inx4in tray for my job in a computer repair store. I frequently work on laptops, desktops, and many other types of computers. These screw trays are designed to be fast, cheap simple, and easy. They hold screws and…

Downloads
94
Likes
18
Rating
0
P
PrintablesW4SLZT

Stem mount for disassembly (Handlebar holder)

You can use this part to secure the handlebars to the bike frame with cable ties or rubber bands while you're removing the fork. That way, they won't fall off or get caught in the cables. Diameter is 28.4mm --> approx. 1 1/8 A clamping…

Downloads
93
Likes
9
Rating
0
P
PrintablesClaireity

Lengthened MGN12 carriage disassembly helper with stop

Model has been rotated to print bottom side down, which does not appear to be a problem on my MK4.

Downloads
83
Likes
12
Rating
0
P
Printablesesox

Prusa MINI Front Plate Cover - no disassembly

This is only a front cover and you don't need to disassemble anything to fit it. You can just glue it on or create clips and clip it. I used two-sided tape to fix it to my Mini. It has holes for screws so you can access them with plate…

Downloads
81
Likes
8
Rating
0
P
PrintablesNeburalis

MGN9 MGN12 Block/Carriage Disassembly Tool with End Stop — Fits MGN9H & MGN12H

⚠ PRINT VERTICALLY (on the side) — same orientation as the original model. Do not print flat! This is an improved remix of the MGN9/MGN12 block/carriage disassembly helper. It adds a rubber stopper feature at BOTH ends of the rail,…

Downloads
79
Likes
6
Rating
5
P
Printableswisnia

Electronics Disassembly Tools

You can disassemble small electronic devices or larger ones. Does not need support. 30% fill - you can control it Upgrade - I raised the base to 0.50 mm, thanks to which it is stiffer. If you have an idea for a tool, write in the…

Downloads
69
Likes
14
Rating
0
P
Printablesdm

Tube for Leavitt telescope metric version (no disassembly or re-print needed)

** You do not need to disassemble your telescope. The tubes slide between two rods when you squeeze them gently. Print the tubes in vase mode (0.16 mm) or spiralize outer layers (Cura) with zero bottom layers. The tubes can be screwed…

Downloads
64
Likes
6
Rating
0
P
Printableslivius

Z-axis bigger covers (no disassembly required)

Cover for Z-axis stepper motors bigger than original nuts. It cover whole hole. Do not require any printer disassembly. Express print, take only 14 minutes for one :) Versions ZAxisCover - If you forgot to add black nut during assembly,…

Downloads
60
Likes
15
Rating
5
P
PrintablesPCDC

Ball Bearing Disassembly / Assembly Tool

I needed a simple to use, fast print to disassemble and reassemble 22mm ball bearings. Therefore, I came up with this nice little 20 minute 3d print. It holds the center bearing piece well, while letting the outer piece have some wiggle…

Downloads
60
Likes
23
Rating
5
P
PrintablesJakub

IKEA SÖDERGARN dovetail hangers system (with quick assembly/disassembly feature)

Hi! I present the bar system that I developed for the table at my desk. A few words of explanation in engineering words: after a long phase of prototyping, I came to the conclusion that the best system for quick assembly / disassembly…

Downloads
60
Likes
17
Rating
3
P
PrintablesStephan

Hausken Silencer disassembly tool

You can unscrew the Hausken silencers with this tools. The small one has all the measurements taken from an original Hausken tool and was successfully tested on a JD224 caliber .30 silencer. The large one has not been tested yet but the…

Downloads
57
Likes
1
Rating
0
P
PrintablesAgent Skwerl

Part tray for electronics disassembly

If you have ever needed to take apart a piece of electronics, you know that you can quickly end up with a pile of assorted screws, nuts, and bolts. Grouping screws in the order they are taken out can help you correctly reassemble parts…

Downloads
53
Likes
2
Rating
0
P
PrintablesAisare

40mm - Fork Disassembly and Seal Driver Tools

A set of tools designed for easy fork disassembly and seal installation on Derbi, Gilera SC, and Aprilia motorcycles. Includes a hexagon circumscribed in a 2 cm diameter, attachable to a 17mm ratchet wrench for quick and safe removal, and…

Downloads
49
Likes
8
Rating
0
P
PrintablesSaltyPkay

Airsoft TM M870 Handguard Disassembly Tool

I want to change my shotgun handguard, but the tool is very expensive and not in stock in my country. So I just build it myself. I was scared that the pla pins will break, but they don't. It's very tight but it fits. maybe use a little…

Downloads
47
Likes
6
Rating
0
P
Printablestg73

V-Core 4 toolhead EasyFit mod - remove/install the toolhead fully wired with minimal disassembly.

Either modify an existing printed part, or print this model with standard RatRig printed part settings and recommended materials. It's really easy to modify an existing part and likely has negligible structural impact. Modifying an…

Downloads
40
Likes
19
Rating
5
P
PrintablesStandy HO

Tatra 815 VT 8x8 - chassis 22 better chassis disassembly

Ahoj, zde je upravený soubory chassis 22 z Printables pro lepší demontáž central pipe od chassis (tedy podvozku od rámu). Díl chassis 22 jsem si změřil a přemodeloval na úpravu, kde jsou posunuté otvory pro blatníky, nádrž a stupačku na…

Downloads
39
Likes
5
Rating
5
P
PrintablesFranta D.

Lube injector for MK3/MK3s+ without bearing disassembly

I created a model of a bearing lubricant. (LM10UU). It is now possible to lubricate bearings on MK3 / MK3s + without dismantling the bearings themselves. -Variation1 is intended for a tube supplied with a printer from Prusa research…

Downloads
37
Likes
6
Rating
0
P
Printablesdtxtr

Screw Organizer Box for Repairs & Disassembly - REMIX with Numbers

A remix of this excellent screw organizer by František Rubáček but with added index numbers.

Downloads
37
Likes
7
Rating
0
P
Printablesjanjyk

Fermzilla disassembly spanner

I was trying to disassemble my brewzilla by myself after not taking it apart for a LONG time and i couldn't do it. Got a second pair of hands and the coupler between the body of the fermenter and butterfly valve assembly still wouldn't…

Downloads
37
Likes
6
Rating
0
P
PrintablesDJ_Designs

V-Core 4 IDEX toolhead EasyFit mod - remove/install the toolhead fully wired with minimal disassembly.

tg73 have a very good instruction https://www.printables.com/model/943447-v-core-4-toolhead-easyfit-mod-removeinstall-the-to

Downloads
36
Likes
13
Rating
0
P
PrintablesJeff Chen

GBA SP Hinge Disassembly Tool

GBA SP hinge disassembly tool. Help you compress the four clips at the same time to get the hinge to start moving out. Use a 1.5mm hex key for pushing the hinge out through the center hole. Print Settings Printer Brand: Creality Printer:…

Downloads
34
Likes
12
Rating
0
P
PrintablesSB Tech

Prusa i3 mk2S mk2.5S Y Axis Belt Tensioner no disassembly required

Made this Y Belt tensioner for 5mm or 3mm dual bearing idler pullies , after looking at a few different designs and thought they were lacking stability the way some of them tensioned with one screw gave it potential for alignment issues…

Downloads
34
Likes
7
Rating
0
P
PrintablesKLM1318

Prusa MINI/MINI+ Tool Organizer (No Disassembly Needed!)

This is a tool organizer for the tools you get with the Prusa MINI/MINI+ (semi-assembled). You don't need to disassemble the printer to slide it in, just turn it 90 degrees and insert it. Then turn it 90 degrees again back to its original…

Downloads
33
Likes
8
Rating
5
P
PrintablesYangorang

1911 Govt Barrel Bushing Wrench Disassembly & Assembly

I wanted a 1911 tool that was dedicated for assembly only for my Kimber Stainless II. So I used the overall profile from MMDeveloper 's model: https://www.printables.com/model/235820-1911-easy-wrench-disassembly-reassembly-extended-b but…

Downloads
32
Likes
6
Rating
5
P
PrintablesKahnindustries

iPhone disassembly tool stand

After dismantling my 50th smashed iPhone for friends and family I got fed up of having the tools rolling around on the table whilst i was swapping back and fore Designed this block to hold the standard components in the set that is…

Downloads
31
Likes
4
Rating
0
P
PrintablesDiarx

200mm x 200mm screw / parts / disassembly tray

Simple parts tray, thin 0.8mm walls to make it easy to print with a 0.4mm nozzle. Being so thin, not designed to be particularly durable or anything but will print relatively quickly for its size and not waste too much filament. For me it…

Downloads
31
Likes
0
Rating
0
P
PrintablesRabbitsThree

Teenage Engineering TP-7 Disassembly Tools

The three non-standard tools you need to disassemble a TP-7. I (relatively permanently) broke mine disassembling it so use at your own risk. Seriously, don't use these tools.

Downloads
30
Likes
0
Rating
0
P
Printables3dexp

PandaBreath: Filter Swap Without Disassembly (Cutout + Filter Frame)

This is a remix of the PandaBreath. The design is excellent, but it has one everyday drawback: replacing the integrated filter means removing the entire PandaBreath. This remix fixes that. What’s new? Cutout: An additional opening in the…

Downloads
29
Likes
4
Rating
5
P
PrintablesGielGK

pneumatic line disassembly tool

a tool to disassemble FESTO 8 mm pneumatic line

Downloads
29
Likes
4
Rating
0
P
PrintablesPteppic

Nerf Longshot Disassembly Tray

Disassembly tray for the Nerf Longshot main gun. The shape of the tray somewhat resembles the gun outlines, the posts are roughly in the same spots as the screwholes. Smaller trays in the main body area for some (maybe even all) of the…

Downloads
27
Likes
9
Rating
0
P
PrintablesArtSuzhou

Anycubic Kobra X Filament Hub Disassembly Jig

Opening the Anycubic Kobra X filament hub can be difficult because the PTFE tube collector is secured by four locking tabs that must be released simultaneously. This is difficult to do by hand and can cause the internal components to…

Downloads
25
Likes
6
Rating
0
P
PrintablesSilentum

TronXY x5s Bed Wire Support (disassembly not required)

I did not want to take my z rod apart so I increased the holes for M5 bolts and made cut out in the back to slide over rod flanges. Very secure, great original design by Hawaiian_Brian_78 HANG TEN! Print Settings Printer: TronXY x5s…

Downloads
24
Likes
4
Rating
0
P
PrintablesCichy

Kingston USB memory - disassembly key

If you just like me, use a lot your Kingston memory. After some time pads will wear out, and then you can disassembly flash drive and clean pads or place a thin layer of solder. PLA can be too weak, prefers to use PETG IMPORTANT! make…

Downloads
24
Likes
1
Rating
0
P
PrintablesDavid Indra

ABB Welcome outdoor bell panel disassembly tool | demontážní klíč

Hi, there I provide a tool for helping with disassembly of ABB Welcome bell panels. It could be useful in case you own the bell panel of this type and lost the provided key, or you have to service that panel and do not have the key…

Downloads
24
Likes
0
Rating
0
P
PrintablesDORLOCK

Fork SR Suntour Disassembly Tool 1/4" 3/8" 1/2" drive

Tool designed for disassembling SR Suntour bicycle forks. This socket tool securely grips the fork nut and features standard ratchet attachments for easy operation. Available in three drive sizes to fit your existing tools Perfect for…

Downloads
23
Likes
1
Rating
0
P
PrintablesIronclad

1911/2011 Slide Stop Disassembly/Reassembly Tool

1911/2011 Tool to push the slide stop out, and then to realign the barrel link in order to reassemble it. 5 Walls, 100% infill, Probably best to print with a brim.

Downloads
22
Likes
1
Rating
0
P
PrintablesScatterthought

Logitech C270 Screw Mount (no disassembly)

I wanted to add a tripod screw to my Logitech C270 webcam, but prefer not to remove the original base. So, I combined @Yourigh's excellent tripod screw (20x8mm version) with the clip-on C270 mount I made for the Creality CR6-SE. The two…

Downloads
22
Likes
0
Rating
0
P
Printablespeppe1955

Handle for disassembly of coupling pins for Prusa XL extruders

Maniglia per lo smontaggio dei perni di accoppiamento per estrusori Prusa XL PETG

Downloads
21
Likes
5
Rating
5
P
Printablesosbock

Leatherman surge disassembly jig

This little jig holds the Leatherman Surge, and a torx T10 security bit. The two ends are spaced for each end of the leatherman (the knife pivot side is wider) I originally intended to have the bit captive in the jig, but it's handy to…

Downloads
16
Likes
4
Rating
0
P
Printablesakshimassar

Parts / screws disassembly trays

Inspired by Functional Print Friday. Only 19 g of filament to print, 80 mm x 20 mm. I recommend using adaptive layers to reduce layer steps in the rounded area.

Downloads
16
Likes
3
Rating
0
P
PrintablesAnthony C

FA20 4UGSE Engine Head Disassembly Tray / Parts Organizer

Remix of the 16 Valve Engine Head Disassembly Tray / Parts Organizer specifically for a FA20

Downloads
16
Likes
2
Rating
0
P
PrintablesRegis

Trimmer Head Disassembly Key - Brush Cutter HOMELITE BCH32-C

I didn’t have a key to disassemble my cutting head from my brush scraper, so I modeled one.

Downloads
16
Likes
2
Rating
0
P
Printableszetiti10

3/8" Tout Push disassembly tool

This is the very simple tool needed to disassemble Tout Push plumbery connections. It is sold on the market, but you can save money by simply printing it! This design is for 3/8" connections.

Downloads
16
Likes
4
Rating
0
P
PrintablesMflados

Gi Sports LVL Loader disassembly tab

Replacement tab for for Gi Sports LVL Loader. Printer out of PLA with support

Downloads
16
Likes
0
Rating
0
P
PrintablesCollin Barker

Parametric Small Parts Organizer Tray for Disassembly

This makes the model printable without needing many little squares to align. Its base is one big one now.

Downloads
16
Likes
1
Rating
0
P
PrintablesCuntan Marius

Mancraft MMR disassembly tool

Simple tool for assisting in the disassembly of Mancraft MMR, specifically designed for removing the brass ring

Downloads
15
Likes
2
Rating
0
P
PrintablesNick Kozobrod

xiaomi MIJIA K10 Vacuum Cleaner filter disassembly tool

Sometimes it's hard to open mesh filter, so i've created disassembly tool. Use 5mm hex key or something similar

Downloads
13
Likes
1
Rating
0
P
PrintablesPteppic

Nerf UltraOne Disassembly Tray

Disassembly tray for the Nerf UltraOne Since the UltraOne has about 90 (more or less) different size screws, it's a nightmare to open without any way to organize the screws. This tray makes this a bit more manageable, dare i even say…

Downloads
10
Likes
3
Rating
0
P
PrintablesYezariael

Phoenix Drake Zerlegeschlüssel - disassembly key

Zerlegeschlüssel für die PHX Phoenix Drake 9mm. Praktisch und kompakt, kann überallhin mitgenommen werden und ist jederzeit dabei. In meinem Range Bag habe ich diesen Schlüssel immer dabei, so kann der Originalschlüssel sicher zu Hause…

Downloads
10
Likes
2
Rating
0
P
Printablesthealchemyst

Decora-style switch built from IKEA BILRESA two-button remote (no PCB Disassembly)

The IKEA BILRESA two-button remotes are a very inexpensive way to add a programmable wireless switch to a smart home setup and as they support matter easily work with any smart home setup. Unfortunately, due to their design they standout…

Downloads
10
Likes
1
Rating
0
P
PrintablesJosiah

My Customized MP Select Mini Z Spacer (, no disassembly!)

Customized version of https://www.thingiverse.com/thing:1808029 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1808029 Instructions Using the following options: ADJUST_HEIGHT = 2.5 FINE_TUNE_HEIGHT =…

Downloads
10
Likes
2
Rating
5
P
PrintablesInaudible

My Customized MP Select Mini Z Spacer (, no disassembly!)

Customized version of https://www.thingiverse.com/thing:1808029 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1808029 Instructions Using the following options: ADJUST_HEIGHT = 3 FINE_TUNE_HEIGHT = 0.0…

Downloads
9
Likes
2
Rating
0
P
PrintablesOzkerr

MP Select Mini Z Spacer (, no disassembly!)

Customized version of http://www.thingiverse.com/thing:1808029 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1808029 Instructions Using the following options: ADJUST_HEIGHT = 4.5 INSERTION_LEVERS = 1…

Downloads
9
Likes
1
Rating
0
P
Printablesninditsu

C920/2/X Ball Joint Mount - without disassembly | for Articulating Camera Mount for Prusa MK3 and MK2

My use case for this was to complete the build from Tnever's design, hopefully they share the missing files one day! https://www.printables.com/model/247829-logitech-c920-camera-monitor-mount-with-swivel/ I printed it in Prusament PETG…

Downloads
8
Likes
0
Rating
0
P
Printablesmechanical0815

Disassembly tool for Baader Planetarium Laser Collimator Mark 3 rotary switch in case of a loose contact

Disassembly tool for removing the sleeve nut on the battery insert, which is required in the event of problems with switching on the laser due to a loose connection. Suitable for flat-blade tool screw driver bit 5 mm with total length ~…

Downloads
7
Likes
1
Rating
0

Cat Lever Door Handle Stop - no disassembly

My son's cats have learned how to open lever style door knobs, and they usually bust in while at the worst time, like when he is on a work Zoom meeting. I saw a lot of designs for a lever lock that only lets the handle pull up, but they…

Downloads
7
Likes
1
Rating
0