Upside down dishwashing liquid holder
The bottle can simply be snapped in and the closure can be opened or closed together with the holder.
- Downloads
- 625
- Likes
- 245
- Rating
- 5
1,199 models
The bottle can simply be snapped in and the closure can be opened or closed together with the holder.
I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…
Object: combclip for dishwasher Bosch SMV68MX04E. It should works also for rest Bosh dishwasher. Notice: all detail informations, especially supports, you can easy find in 3mf file with project (open as project in slic3r). Printed on…
This is the best project I have found. In my version, I changed from 5 to 6 letters, and changed the angle of the indicator to make it easier to see. Knob is only part needing supports. Print it pin side down, to ensure a smooth…
I used ASA filament for printing this clip. Maybe PETG works also fine. PLA is not suitable for this use case.
This model was designed to be easily printable on a Prusa Mini+ . For this reason, the overall dimensions are optimized for the build volume of this printer. Another key design goal was to allow printing with as few supports as possible.…
*Iteration, added 2 new versions as mentioned in the comments, One that is solid bottom so you can do slicer magic and make any bottom pattern you want, but still open open on the sides, and then Solid bottom and solid sides. So whenever…
This is a holder designed for holding the hose for your Bob. I made a couple of different designs with varying thicknesses, and this version seems to work perfectly (been using it for many months without failure). A piece of double-sided…
Dishwasher cleaners have to be put upside down in the dishwasher so the cleaning agent can pour out when the membrane inside the cap gets wet. If your dishwasher has a tray instead of a cutlery basket this is quite annoying. I used to…
Make sure to print the body sideways as this will strengthen the noses/hooks that hold onto the wheel. You will probably crack them otherwise when putting body and wheel together.
[ IMPORTANT in order for this part to fit, you have to scale it from 100% to 10 % ] This is a spare part for upper basket rear stop, which you can use instead original part, it's cheaper and faster to print, PLA under a dishwasher…
I made this tool to put on our CNC machines to signal to the next user. The Stop / Load magnet is to signal if you can set up the machine with something new or if someone is in the middle of a job so as to not disturb it. While posting…
I needed to replace my dishwasher wheel spindles as they kept falling off. So I designed this replacement spindle using Fusion 365 and imported it into PrusaSlicer. I use Prusament PETG and a .1 layer height,60% infill and with a .4mm…
Update: 2025-11-13: Added a remix for a laser-cuttable model. https://www.printables.com/model/1479675-dishwasher-tablet-dispenser-laser-cut-version Dishwasher Tab Dispenser – Sturdy & Simple A no-nonsense, ultra-durable 3D-printed…
Saw a few of these posted, but decided to design my own. A half twist of the knob switches between "Cllean" and "Dirty". I printed the Letters.stl in 2 colors. The first 1mm was the printed in the desired letter color (white). The rest…
Updated 10/16/2024 to fix problematic lever, with new meshes and .f3d --- Nothing too special here. We wanted a simple clean/dirty indicator for the dish washer. Sticks to the dishwasher with some embeded magnets. Included fusion file for…
Multicolor dishwasher sign no painting/MMU The sliding mechanism feels very satisfactory because the magnet makes it snap into place. I printed everything at 100% for a snug fit. So the text plates and magnets don't require any glue, i do…
I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a…
Designed for storing 1kg of dishwasher tablets. Tablets dispense automatically due to the sloped interior. Print orientation:
Have you every wanted to snag a bowl from the dishwasher for a big bowl of cereal in the morning, but was unsure if the dishes in the dishwasher were clean? Well, now you can know for certain! Just use this Dishwasher Status Selector…
This is my take on a dirty/clean dishwasher indicator. There are some amazing versions of this print out there, but this was how I wanted mine. Print Instructions PETG seems to work well at 0.2mm layer height. Try out some more materials…
New gadget for your kitchen - Dishwasher tablet dispenser. WAF (Wife approval factor) near 100%! Mounted on double sided tape in any place you want. Also could be mounted angled. Tablet size up to 30mm x 40mm. If your tablets doesn't fit,…
Based on the great model by @ KaliM. UPDATED VERSION v3 on December 1st 2024. Changes : Walls are thicker (3 layers) Vertical hole at the front is bigger: easier to guide tablets going in Hole to retrieve tablets is bigger (vertically &…
Dishwasher Door Prop Opener: A 3D-Printed Solution for Moisture-Free Dishes Overview Is your dishwasher retaining moisture long after the wash cycle is complete? Say goodbye to musty smells and hello to sparkling, clean, dry dishes!…
This is the dishwasher indicator I've had stuck to my dishwasher for the past few months. I saw that there was a mechanical marvels contest going on and figured now is as good a time as ever to publish the work! If you ever dreamed of…
V2 Version 2 has some corrections after community feedback. V1 and V2 parts should be compatible Main body now has a slope so tablets slide out better Opening on the front is slightly bigger Printing Instructions The design is split so…
dishwasher sign clean/dirty print-in-place This is a Remix of Sliding Word Changing Dishwasher Sign by middlefingerboss Thank you for this great idea! I am not sure if this is the best idea I have had so far. Designing this as an assembly…
Yet another Dishwasher Label Features: Different colours for ‘CLEAN’ vs ‘DIRTY’ Slide easy side to side and wont come out No Multi material required Give it a try
for my Dishwasher i have created 180x60x132 Print instructions I have printed it with "Black EasyABS filament 1kg - Diameter : 1,75 mm " Works fine ;) Don't print it with PLA for dishwasher!!!!!! :D
The original design didn't quite fit. so i took the f3d file that the original auther provided, and added a small cut to the lever. Now everything fits snug. thanks for that amazing design! Credits go to @FMD →…
This is a quick remix of the popular dishwasher tablet dispenser designed with speedholes to save material during printing. I have also changed the attachment system to only require one screw near the top (keyholed).
Introduction This is a remix of the excellent dirty/clean dishwasher sign by Printess . It differs in that the base is printed vertically with two colors of filament, with the color changing midway up at about 45mm. That way, the dirty…
Spare part funnel for Bosch or Siemens dishwashers to refill salt. Fits probably other brands as well. Funnel diameter 45mm.
EN: This is non-original replacement part for Bosch/Siemens dishwasher (originally made for my Bosch SMV46KX01E/28 dishwasher ). It is almost identical as original part, only issue is that it doesn't move so much freely as original one.…
Resolve the endless dishes confusion in your household with this simple magnetic sign! This is an easy print that includes space for 5 magnets that can be dropped in with a pause during the print, and an optional color change can be used…
Print in PETG or other high temp resistance material as required. I used a .6mm nozzle and .3 layer heights. I assume it would fit other brands and models but only have tested it on the unit I have. Please feel free to let me know in the…
Features Scoop Volume : 20 ml Robust : 2.4 mm Wall thickness Slim design for high slim boxes Long tip to reach corners Low Material Usage: 13g Print Settings Layer height/Resolution : 0.4 mm Nozzle Size : 0.6 mm Infill : 100% Material :…
Tired of cleaning your new 10 mm glass or stainless steel drinking straws by hand with a brush? Just use this holder in your dishwasher and you can clean them perfectly without effort! Designed to be printed without any supports. Snaps to…
Simple clean / dirty sliding sign for your dishwasher. Works great with single extruder / pause / change filament type of printing. Simple print all three parts, place the 'clean' piece inside the 'dirty' piece and glue the other piece…
I've lost the original one, had to reprint a spare
https://paypal.me/radicalreel Print with support on overhang. Glue in the slide. Can take a whole box of DM tabs.
Replacement clips for the tray wheels in the aeg / electrolux FAVORIT44010VIL dishwasher. Normally I would recomend to print it in ABS or PETG. But I printed 8 test pieces in PLA and they have now been in the machine for 2 month. Washing…
This is a tool that holds the TM6/5/31 knive in place when it's in the dishwasher for cleaning.
EDIT/UPDATE: NEW VARIANT! Print the NEW V2 edition! its 2 diffrent part and the end need to assembly. (See on the new pictures) Now is not easy to brake the top hook! You can print now the V2 from PETG/ABS/ASA/HT-PLA Mounting for folding…
Remixed my old project to be more tough, three walls thickness, might be more suitable for printing with different nozzle sizes
Simply print it out and should fit for most of the dishwashers, if not, cut the edge until desire size. 93% fits mine prevent chopsticks to fall off 0.2 20% infill
UPDATE: Uploaded new wheel STL. Replaces a wheel clip (and optionally a wheel) on the top rack of a Bosch dishwasher. The clip fits OEM wheels too. Printing: Clip Support everywhere 0.2mm layer height, 3 perimeters, 100% infill Slow down…
The model prints without supports. I used TPU and printed it with a layer height of 0.2mm. I guess that bigger layer heights also shouldn't be a problem. Just make sure that the material you use withstands the temperatures inside the…
Remixed the base of the original to add some depth and strength to the sign and added 5mm x 2mm recesses for small magnets to be inserted.
Dishwasher Spacer - holds the door open. Designed for 28 and 38 mm worktops . Printed from PETG, no supports needed. DESIGNED in ONSHAPE . Wait till they are all steamed out before adding spacer. Open the dishwasher all the way till they…
After my old wheels are broken i wanted to buy spare wheels but they only sell them including the basket for 75.90EUR!! So i designed my own. Everything can be printed in one piece. The necessary supports are already included in the…
Larger version of the stylish “Dishwasher Tablet Dispenser - No Supports” from @jpedrompsousa_64683 which I loved for its simple printability. I also added an inclined guide for better dishwasher tablet feed. There are 2 versions of the…
My used dishwasher was missing these. STEP included.
If you have trouble keeping bowls in place in the dishwasher, you can use this practical and easy-to-install accessory. This is a clip that attaches to the upper basket and holds the bowls in place, preventing them from tipping over…
Replacement locking nut for the bottom spray arm of the AEG FFB83740PM dishwasher. The original nut (picture #2) is constructed in a way that's very weak, having a very small contact surface between the body and the threaded part. I…
Fits 22mm (⅞ inch) drain hoses. Print the clips on their side with 3+ walls. Avoid over tightening as the plastic can split.
This is a remix of the excellent Dishwasher Tablet Dispenser . I wanted a clean way to keep it mounted under my sink without drilling, so I designed a slide-in holder that attaches to the cupboard wall with double-sided tape. Dispenser…
Replacement wheel for Bosch, Siemens & Neff dishwashers. Print as solid using a high perimeter count. Print using a strong and temperature-resistant material (PETG, ABS, ASA, PC, NYLON, etc.). The part that inserts into the wheel and onto…
A simple dishwasher door holder.
Everyday object, simple designs that help you at your home or office. Do you have to refill your dishwasher with salt and it goes everywhere but in the hole? Use this 3D printed funnel and voila! your problem goes away!
PLA Perimeter: 2 Resolution: 0.3 Supports: no
For indicating from the outside whether the dishes contained within are dirty or clean. A pretty simple print overall, just one color swap to help with legibility and some superglued magnets are needed.
A simple and elegant clean/dirty sign for dishwashers. Easy to flip but won't accidentally change sides when the door is opened or bumped. No glue or magnets required, just filament and some double sided tape. The text on the sign piece…
Parts for IKEA Behjälplig
laufschienenanschlag hinten beko 6634 fx Print instructions Category: Replacement Parts
Two part assembly: base and front plate, which slides in base for assembly and is easily removable. Optional M3/M4 screws for fixing to wall.
Problem: Recently our dishes coming out of the dishwasher started tasting like our dishwasher detergent. First we were using pods, even after switching to a different solid detergent in powder form after a couple of rinses we had the same…
This is a remix of Jimbotron's Dishwasher slider on thingiverse ( Clean Dishes, Dishes Dirty, dishwasher sliding sign by Jimbotron - Thingiverse ). I didn't have the magnets he was using, so I remixed it with 8 6x2mm magnets that I had.…
Note: the holder works fine but after a few runs the used PETG has deformed. I used the Auto program on the dishwasher which should not exceed 60 degrees Celsius but together with the mechanic force it will not persist. I am looking out…
looks very nie in the kitchen under the slab
Replacement wheels for KitchenAid lower dish rack. Recommend PETG or ABS Model number: KDTE204ESS2
EDIT: I printed my wheels in PETG but they got a little deformed when dishwasher was used at max temperature (70°C). Should preferable be printed with some more heat resistant filament.…
The Wheels of our IKEA Dishwasher are worn out and the Busket derail often. The first attempt with PETG was not as good, after one run the Wheels wasn't round ;-) The next attempt and my recommendation is to use ASA for the Parts. All…
Improved version of the capsule box. Slightly easier printing, smaller bridging. Snap-on lid with printed hinges. Removed holes for better protection against moisture. Mounting holes in the same place as the original.
Replacement lower rack wheel. My dog killed one years ago but this was my first functional print on my new MK3S+. Works great! Outer wheel diameter is 38mm. Inner wheel diameter is just shy of 28mm. Dishwasher rack axle is 6.57mm. Remix…
I used PETG HT100 and it has been working for more than half a year of daily use. Ordinary PETG broke down after a few days.
@ALX_1707 Had made an awesome kitchen thingie. I just needed to edit it a bit for a better view to text. Now I don't need to kneel in front of my dishwasher to see whether there's dirty or clean stuff inside. kudos @ALX_1707
Simple sign for the dishwasher to let people know if the dishes in there are clean or dirty. Simple print at any layer height, no supports needed. I used the Bambu Carbon to print this multi-color. The recessed spots for the magnets are…
Remix of Cisco's awesome DIRTY|CLEAN dishwasher label, but with a deep base that contains two cavities for mounting 6x3mm magnets such as these . I wanted to have a nice label for my dishwasher, but didn't want to use adhesives or…
A simple indicator you can attach to your dishwasher to indicate if it is clean or dirty. It measures 64 x 24 x 5.7 mm. No multi-material printing needed. Simple assembly with no glue required. To assemble, press the cover into the groove…
Just a remix of an existing model with added magnet holes in the back for 2 x 10mm magnets. The magnets I used are 2mm thick and just pop in securely without any need for glue. This is a remix of: https://www.thingiverse.com/thing:5257275…
Dishwasher sign that attaches to the dishwasher (or other magnetic surfaces). The magnet compartment fits a magsafe magnet: https://www.aliexpress.com/item/1005004925924694.html The backside plate and the casing fit together with a ring,…
Print instructions: Recommend PETG or better as many dishwashers reach 75C or maybe more. PLA is probably going to be a fail. I printed on a Prusa Mk4 with a 0.4 nozzle on 0.1mm detail with solid infil. My clip fitted perfectly in a G6100…
Two variants are included, 140x240x180mm for typical i3 size printers and 100x300x180mm for larger printers but all dimensions - plus the wall thickness - can be easily modified with the OpenSCAD customizer. Prints without supports
Bob dishwasher funnel for easier re-filling of water
I always had problem with large wine glasses breaking in dishwasher due to lack of support to hold it in place. I have remixed build by NR - https://www.printables.com/model/107587-basket-for-stencils-4-compartsments to, modifications are…
Dishwashers nowadays are usually so quiet that people don’t realize it is running. Plus my appliance is so well designed that no buttons, lights or indicators are visible when it is closed. Family members may open the dishwasher by…
A simple and effective dispenser for laundry or dishwasher pods. Mounted to the wall with two screws or 3M Command strips. Supports on for the overhang in the mouth of the dispenser. I printed in PLA at 0.3mm Layer height, 2 Perimeters, 3…
I remixed asb2106's design from Thingiverse because the letters aren't fully attached to the baseplate when sliced. I re-created it from scratch by using the original design as a sort of template. The only extra items you'll need for this…
This model is designed to use four 8mm x 3 mm magnets (I bought mine on Amazon). The magnets are concealed within Base, kept in place by Casing. The "Clean" / "Dirty" letters snap into place (or glue them). The tolerances are tight. If…
4 M3 Screws needed, it should be printed with something heat resistant like ABS/ASA
Dishwasher Door Prop Opener: keeps your dishwasher door open to let moisture out (smaller version than original).
Replacement rail end cap for GE dishwashers. May fit other brand dishwashers. Tapped in place with a rubber mallet. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: Doesn't Matter Resolution: 0.2 Infill: 100%…
This is a handle to hold half of a standard yellow sponge. I was never able to find the same holder online I had from way back in the day, so I designed this one. Cut a yellow sponge into halves, and then slide one half into the center…
Designed to fit Samsung dishwasher & oven, but you should be able to resize to fit anything with a round handle. It might even work on a square handle but I've never tried. Works fine in PLA but PET-G would probably be better.
The thing that holds the plate rack together kept breaking. Here is a new stronger one for the Fisher and Paykel dishwasher. I did with 60% infill. Few months later and the ABS is still fine.
Colored plates for Bergeron720's dishwasher sign . Supports single nozzle; no MMU required. Parametric. You need to download and print the base unit from Makerworld, then use this design for the insert plates. Customize You can customize…
Holder and Dispenser for Dishwasher Soap
This Drinking Straw Holder for Dishwasher can be used for multiple sizes of straws. I noticed that some of my staws are too small for the original design. In this remix, I just modified the bottom holes of the straw holder and replaced…