27 models
This is a really great project that was created by talented people on the Neo - Arcadia forum. Victim of their success, unfortunately we can no longer order "for the moment" the complete frame kits to manufacture the project. In the…
A key extension to make it easier to reach the lock on the side of the tablet holder for the DMD-T865 and DMD-T865X. It is designed to fit in the tank compartment on the BMW 1250 GSA. It's a tight fit for the key, but you don't want it to…
Keep your EC5 connectors free from dirt! Colour-code the caps to help identify which batteries are Charged or if you've set them to Storage-Charge. I use a green cap to show that a battery pack is fully charged and ready to go; if there's…
Built on the foundation of the FDM4, the FDMDuos deliver stronger low-end performance with enhanced output below 100 Hz. If you like a little junk in the trunk, these bad boys are for you. They still carry the top end sparkle of the…
I made this bar mount to fit the DMD Remote 2 to my KTM 390 Adventure R. The angle and spacing is adjusted to fit around the mirror mount and clutch assembly on my bike but it might fit other bikes as well. The design uses two M4x25…
I needed a hand towel hanger to go over my shower screen. The remix source was to suit a 16mm cabinet door so I modified it to suit my 12mm thick shower screen and reduced the Z height from 25mm to 10mm to save on print time. I've…
Spacer to fill the gap between ColorDMD LCD screens and Stern metal style speaker panels. Print two for each game. Print Settings Printer Brand: Bambu Printer: X1C Rafts: No Supports: No Resolution: 0.28 Infill: 10% Filament: Any Any Any…
This is a frame to mount two P2.5 64x32 led video panels side by side for use in a pinball machine. The first layer is solid because I had better bed adhesion when the print head wasn't skipping around to layout the holes. The openings…
It’s really day and night compared to the old led “SMD2121” DMD P5 panels with SMD3528 : https://fr.aliexpress.com/item/32837938335.html?spm=a2g0o.order_list.order_list_main.102.21ef5e5b1T7JE4&gatewayAdapt=glo2fra
the ball in this adapter connects to RAM system mounts and the plate is compatible with T665 android phone from DMD (Drive Mode Dashboard) The central hole fits a screw (I used a self-tapping wood screw) in order to keep the object in…
I didn't like having the pins exposed when I wasn't using the nav. It's designed to just barely make contact with the oring as I didn't want to compress it too much. I printed mine “upside down” out of ASA and added the logo using the…
This kit is for mounting a Pin2DMD EVO board to Data East pinball machine. Spacers are required as the LCD panels on the EVO board push against the clear plastic window (at least in my case). Print each board spacer (4 corner and 1…
NOTE: - I UPGRADED IT AND ADDED MORE HERE: https://www.thingiverse.com/thing:4736877 This is a Lansky Stone holder for the DMD Diamond resin whetstones that can be purchased on AliExpress. Search for "DMD Diamond resin whetstone" in the…
Tištěno FDM 0,4mm tryska, stopa 0,6mm, 0,25mm výška vrstvy PLA Printed FDM 0.4mm nozzle, 0.6mm footprint, 0.25mm PLA layer height
Pinball DMD Bezel for AT Legends HD Display (136mm x 174mm, 8-inch, 1024x768) Upgrade your pinball machine with this custom-designed DMD bezel, perfectly suited for the AT Legends HD display. This bezel is specifically crafted to fit the…
Pinball DMD Bezel for AT Legends HD Display (136mm x 174mm, 8-inch, 1024x768) Upgrade your pinball machine with this cu
Box for DMD nav tablet, so you can carry it around in backpack without worry to scratch the screen. I used duct tape to hold box together as quick solution, and it became permanent solution as it work great for me. Used some soft pad…
Stand for the Artcab ZeDMD see https://www.artcab.fr/dmd/608-zedmd-pret-a-l-emploi.html Let me know of you need access to the Fusion 360 project.
This support bracket is designed for builders using the Virtual Pinball flatpack from PinballCabinet.com and following the magnet-mounted DMD installation method shown by WayOfTheWrench. His approach uses cabinet door magnets to make the…
A simple ball joint that fits the DJI Osmo handlebar mount. The ball is 20 mm and the bracket is designed to use the original screws. I've also added a version with a 25.4 mm ball that might fit b-ball RAM mounts. I have also included a…
For https://www.thorkracing.com/produto/dmd-remote2/ not perfect but good enough to use with the original (very short) M4 screws.
I'm currently testing contact issues on my DMD offroad cradle for the DMD T665 phone. I have created a sealing ring with a reduced height by 0,2mm which seems tor alleviate the problem for me. STLs provided are the original and the…
made of ASA in enclosed printer (Elegoo Centauri carbon) with 0.6 head. ASA is better than PET-G for higher temp and UV performance. Takes a bit to set up the parameters, Basic advice - print very slowly. strongly advise to mount on…
After building a larger version using P5 LED panels, I also wanted to build a smaller one. The p2.5 panels (2 of them side by side) are 80mm X 320mm and are basically the same size as a pinball cabinet Dot Matrix Display. These files are…
This is a really cool project that was created by some really talented folks over on the neo-arcadia forums and as soon as I saw it I HAD to build one. The original project called for an acrylic cover plate, which I decided wasn't…
This is a special spacer to stop the tablet and mount from bouncing around when going over rough terrain. The spacer works by spreading the load over the whole top cross section of the instrument cluster/tower. The 450MT's tower is made…
Built on the foundation of the FDM4, the FDMDuos deliver stronger low-end performance with enhanced output below 100 Hz. If you like a little junk in the trunk, these bad boys are for you. They still carry the top end sparkle of the…
