Mini Bulldozer key chain
Small bulldozer keychain for the operators at work. might worth scaling to 80% or so if you actually want it on your keys. PLA works great and .2mm layer height is recommended.
- Downloads
- 1,096
- Likes
- 141
- Rating
- 5
148 models
Small bulldozer keychain for the operators at work. might worth scaling to 80% or so if you actually want it on your keys. PLA works great and .2mm layer height is recommended.
Standard Shirt button. Print in whatever color you need. I have included a build plate of a dozen so in one print you have what you need for your shirt or blouse. seven for the front, one for each sleeve, two for the button down collar,…
2.0 mm layer height, 20% infil, 3 perimeters. Tree Supports.
Hello, this is an RC Dozer. Its intended to provide a fun entry level way to get hands on experience with some simple electronic components commonly found in robotics. Its also intended to wreck havoc on whatever toys lay waiting on your…
I've seen an interesting puzzle from Youtube ( https://www.youtube.com/watch?v=j6D1ie94y4M ) so this is it. Print 12 pieces of this to create one set of this puzzle. Category: Puzzles
That's right, wonderful people, another way to roll dice, this time with an even more gratuitously over-engineered, print-in-place, support-free mechanism! Press the paddle at the back and the tray tilts forward, driven internally by a…
As seen on YouTube: Dayton Audio ND25FA-4: https://www.parts-express.com/--275-059 Dayton Audio TCP115-4: https://www.parts-express.com/--295-415 Dayton Audio XO2W-3K: https://www.parts-express.com/--260-144 Screws:…
tlač 1:1 pre male postavičky tlať 1:1,2 pre vačšie postavicky. vznikne vnutorný priestor 4,5cm dlhy vid fotka šroby: 3x10 4ks 3x25 1ks infil 20 perimeter 2
A simple tool for mess-free grinding, dosing and even distribution of coffee grounds in espresso baskets before tamping. The tool consists of two rings that are screwed together with a variable number and sizes of spacers between them to…
Version 10 was too thin on the back corner of the cab. Version 11 fixes that issue. Prints without supports. Model in the photos was printed in AIORobotics Yallow PLA on a Prusa Mini+ at 0.3 Layer Height, 3 perimeters & top/bottom layers,…
This is a rip of DRG source models, with the canister tanks filled for printability. I've included the source obj files in case you want to play around with positioning. If you plan on printing this, I suggest using 3D Builder or a…
My son wanted to have a bulldozer for his Lego Duplo. It clips onto the front coupling ot the excavator tracks. UPDATE V2 - ribbed, more stable version - prints with just a little bit of support within the coupling
HP Robot Otto Crawler bulldozer Similar model to my previous one, the change is in the bulldozer tracks The original model of the Otto is not changed , I only added accessories- Rims, Tracks, Blade, Lights, Scraper. Attach the discs to…
This is a 3d printed, radio controlled bulldozer. It is about 200 hours of printing time, zillions of screws, bearings and so on. It has 2 motors, one for each track. And, it has 2 servos lifting the blade up and down. The whole project…
This is a robot that started off with a basic ottodiy.com +OttoDIY After building the basic Otto robot, I went on to design three other robots, and Dozer is the final product of my work. This is Dozer V. There is Dexter, Clara, and Jarvis…
Scaled down to match 1:220 from: https://www.thingiverse.com/thing:1621482
This is an upscaled modified version of the RC Boom boat or Dozer boat boot by rene76 over at Thingiverse. With a functioning RC fire monitor and RC-controlled water pump installed, it brings some action to the pool. Major changes as…
I used superglue to attach the ends of the parts and connector pins. I also only used a small bit of support on the end piece which you can see in one of the printing photos.
This is my version of a boomboat / dozer boat in a scale of 1/30. I was unhappy with a kit that i bought of a 1/18 mini tug boat (see banggood / ebay). There was a lot of parts missing and the wooden hull and ABS deck / house where in…
Upgrades From Version 1 The body panels with grey colors can be now printed seperately and then joined with main body thus the distinct color combination can be achieved without painting. The back panel engine cover is now operated with a…
Description Yet another smaller model; this time a Bulldozer! This model, although labeled D1581, can also be built in the D1560 variant. The difference between them beeing the blade. While the D1560 was mainly used for hard ground work…
This is a simple fix for the track/treads of the excellent Killdozer remix by MakerKJS (www.thingiverse.com/thing:4851061) I wanted to print a mini Killdozer, and when I scaled the model down to 50% a thin area of the treads turned into a…
Boom boats are mainly used in the USA and Canada to push logs together to form a raft. I have always found these little power dwarfs very funny and have tried to construct one that is floatable with a little trickery. Unfortunately a…
Betzi the little Bulldozer is part of the LITTLE ROBO family . The LITTLE ROBOs are different, small robots mixed with vehicles of all kinds. From construction machines to boats to aircraft and everything in between. The special feature…
Attention: - For latest version of the model Click here There are three ways to print this. As single piece:- Please download STL file but there wont be any movements. As nine pieces :- THE PREFERRED WAY . Please download 3mf file having…
I designed this Bulldozer Sand Mold in SOLIDWORKS for the Printables Sand Molds contest You can remix & improve the model freely! the file is orientated for convenient printing in STEP, STL & 3DM files! Supports are probably required .…
Entry for the ' Crash Derby Cars ' contest 2025. The model is printable without supports and optimized for easy printing. Like the original Prusa car models it consists of three parts which can be assembled without glue. I've attached a…
Model remixed from @Bubutech great creation. 34x43mm Rubble character size can be used in it. 2mm screws to secure the wheels. Six 3mm screws and four 3mm nuts for the rest of the moving parts. The tracks must to be glued to the bulldozer…
Had a lot of trouble with the organic support breaking when the branches got small, then discovered “branch diameter” and set it to 5mm instead of 2mm, which corrected that at the expense of a better looking model. I used Matterhackers…
I designed this ice scraper because I wanted something I could use to scrape and break the ice off your car windows. This is a combination scraper, breaker. It's angled to separate the scraper from the breaker. The angle also helps hold…
Replicate Marvin Heemeyer's Iconic "I've had enough" armoured bulldozer. Along with plaque letting people know FAFO 15% gyroid infill.
Was looking for an egg holder for the eggs we get from our chickens, and this was exactly what I was looking for! It was just a bit too big! So I modified the design to hold 6 egg each. Thanks to the original maker:…
Box for the Dirty Dozen Puzzle ( https://www.printables.com/de/model/84752-dirty-dozen-puzzle )
I adjusted the tolerances of the original model as well as tweaked some thicknesses in order to improve the printability on the .3mm setting. Tolerances were previously: 4.6mm model thickness, 5 mm slots, .4mm gap between “wells".…
Paint and print using the AMS of your choice, or manually switch filament at different heights if you don’t have an AMS.
I printed the tread/track with black TPU. Print the wheels with PLA (indoor use) or PETG for outdoor use.
1.- Introduction Since I was a child, I was always attracted to puzzles that can be assembled in different ways. This puzzle is a simplification of the Octagonal Pillars Puzzle , that leaded to have all the 12 Quint 2D figures together…
Charles Bentley Bulldozer broom assembly. Missing the screw to complete the build and designed this. Printed in Yellow to match original brrom. Category: 3D Printing
Finally I remixed my own bulldozer to be less toyish and more realistic. Modifications: detailed side arms detailed engine, hardly to see through engine cowlings, but it is there, including cooler, 4 cylinders and pipes to exhaust and air…
Unc Acorn Dome Nut These acorn dome nuts provide a decorative finish while securing threaded connections. Ideal for visible applications where aesthetics matter, such as furniture assembly, decorative hardware, and consumer products.…
🐾 Meowldozer – The Feline Force of Fluff and Fury! Brace yourself—this is no ordinary kitty. The Meowldozer is a chonky unit of pure determination, ready to bulldoze bad vibes and flatten anything that stands between it and snack time.…
Glaurung – První drak Středozemě (3D model inspirovaný Silmarillionem) Tento 3D model představuje mocnou bytost inspirovanou Glaurungem, vůbec prvním drakem vypuštěným do Středozemě. Glaurung, známý jako Otec draků, zosobňoval syrovou…
Modified the side upper body so a logo can be glued, CAT logo in this case. Front LEDs are facing forward as i love how bright and how they look this way and made the housing rounded. TIP: first insert the wire for the motors through the…
Edit 1/30/2026: Finally checked this page after 2 years and saw the comments about the scaling issues. Went through and remodeled each part to match the dimensions I printed it at in 2024. The model is still not optimal, as I made this…
Ahora presentamos un divertido juguete para construir, ¡sólo necesitas imprimir 7 archivos! ¡Bulldozer Vintage con banda
Behold a mini rc dozer that can fulfill your wildest dreams. you can drive it with most any bluetooth controller from playstation to xbox to steam to wii. Print the tracks in tpu my discord to learn more and to find all the electronics…
This is my version of a portable “Dirty Dozen” Puzzle. This design is more or less a remix from the design by FunFunBoy. I scaled his pieces and added a box where you can store the puzzle in any state. From start, all parts loose, to…
This is based on a puzzle of the same name which I saw on the internet. Print 12 copies, then make them fit together nicely, as pictured. Seems easy right? Use OpenSCAD's customizer to create larger or smaller variants.
Use just one, or print out 2 and glue them together. Just a simple egg holder. First thing i designed in fusion 360 that wasn't just made of lines and accurately. Print with variable layer height for the best result. You could also put…
In an attempt to ensure cross compatibility between my models, this is an adapter which can convert my design Yellow Bulldozer with Movements to the capabilities of my other model Yellow Road Roller Modern . I have also given a bolt lock…
Do you like this design and want to give a Tip for it? Do it here This is a Wall Mount for the GrindDozer Espresso Funnel / Distributor, that you can find on thingiverse too . I would advise you to use (opt. food-save) PETG, since it's…
One thing that happens when you get involved with things 3 D is how you look at things. I now think when I am out and about and see something I want. I do not want to buy it; I want to make it. I saw a small toy bulldozer and studied how…
Blank Grille, and blank Upper body for RC Dozer parts
OTTO Robot Dozer I've had the model of this lovely robot Otto on my desk for two weeks now, I have more ideas for his new design, but unfortunately I haven't had much time. I hope I can still contribute some to this contest. The basic…
First attempt at creating options for the original 3dbenchy.
Design: https://cad.onshape.com/documents/5ea1bad7d58eb133543db8f4/w/2911d5b373cc54b2ba982e76/e/c1821844de435ce1a8fc9415?renderMode=0&uiState=68b0c55711b99720e3533587
remix of blank license plate frame design in a way that would make Marv proud.
I redesigned this bulldozer bucket for a better look, and added some stiffness
A box to store the puzzle in. It fits the puzzle assembled as well as disassembled. When storing the puzzle disassembled, there isn't anyfree space left so you don't have to wonder if you have all pieces and count them.
EDIT: If you downloaded this before 04-30-2024 you got a version with bad hole tolerances. Very sorry about that. It should be good now but let me know if not. Printed on a Bambu Labs P1P. Not tested on any other printer. You might need…
130mm RC ABS (work in PLA too) printed Buldozer with servo motor and gears laptop batteries 7805 voltage regulator "all functions" each thread and the arm. Note : printing in ABS made it easy to assemble with solvent. Instructions ERRATUM…
SV06 Bulldozer: What is it? This toolhead attachment is designed for automatic print ejection for a print farm setting/ looping gcode. You can use this bulldozer to knock finished prints off of the build plate and start a new print, like…
add-on DOZER BLADE N&K loading vehicles you can find the main body at https://www.thingiverse.com/thing:2713498 i have update whit a add-on Dozer blade = https://www.thingiverse.com/thing:2782700 full arnour =…
💫 Beren & Lúthien – Legendární Milenci Středozemě (3D Model inspirovaný Silmarillionem) Tento 3D model zachycuje dramatický a emotivní okamžik inspirovaný příběhem Berena a Lúthien — jednou z nejikoničtějších legend Tolkienova světa.…
I am starting to get into my 3d printed RC construction vehicles and love what @profboots is doing with his models. I have downloaded and starting to build the mini Skiddi V3 (…
I decided to upload a smaller version of the dirty dozen puzzle i made with fusion 360 (simple extruded sketch with rounded corners). You can search for the solution on youtube.
Need hardware for 1 speaker unit - 34x m3 Heat insert - 34x m3x12 hex socket screws - 1 pair of Dayton Audio BPA-38SN binding posts - 1 2-way crossover
Complete more advanced challenges with the Micromelon Forklift attachment. Powered by 1 small 9g servo connected to the Rover's servo connectors. For the full build guide, click the link below! Build Guide: Bulldozer To get started using…
I installed a rotating beacon on the RC Dozer. To do this, I added a hidden cable channel to the upper body (23). Created a flat surface on the roof, where I glued the beacon on, wires through the hole. I found the beacon on AliExpress:…
This is a replacement cylinder and shells for the boomdozer that allows you to mix and match ammo as well as reload a number of shells for quick reloads. It uses a twist lock and magnets to keep the shells in the cylinder you need #6…
I did the removal of the original muzzle but was not happy with the solvent welds left over on the front of the blaster. I designed this part in Fusion360 and it came out great! The fit is snug and only required a bit of pressure to get…
This is my easy print egg tray . My modern souble door fridge couldn't hold the traditional long 12 eggs trays or cartons on the door and therefore i was left with two standard 6 eggs trays that made a terrible use of space. I designed…
Demo video: https://youtu.be/3G_c1d13HUQ Build video: https://youtu.be/SmfBKVWOh0M This is a single motor 2 function remote controlled toy robot with tracks instead of wheels. It can move forward or spin in place for steering. It is a…
My 4 year old nephew said he wanted me to make him a bulldozer. Had to make a second one to keep his little sister happy. It uses Lego wheels and tracks. https://www.amazon.com/dp/B00YBERL4E?psc=1&ref=ppx_yo2ov_dt_b_product_details I…
Hey there! Here is a Lattice puzzle that I drew up in Fusion 360. I've been using these as design exercises to fill in the spare time between the other CAD design work I do, I like to give the puzzles to my wife and she absolutely loves…
After deciding to print the wide body version to make installing the motors and wiring a little bit more comfortable, I found that the geometry on the Upper Body (Wide Version) had some problems when it came to the center section near the…
Bulk print of emergency whistles, used to alert neighbors to frozen weather conditions.
A simple egg tray to hold 1 dozen eggs in a 3 x 4 configuration. I can fit two of these in the top egg shelf of my LG (North American model) refrigerator. Simple text to add a little charm to it. As well as a couple of small finger…
Futuristic flying bulldozer powered by nuclear energy, designed for Crash Derby board game. Printed with 0.05 layer height. Painted with vallejo red ink 72.086 and glow in dark nail polish.
Note: for HO scale 1:87 multiply the scale of model by 1.15 (115%) in slicer software A Generic Bulldozer, based on the Cat D7E blueprints. Modeled in Fusion 360. I haven't had the time to print it yet, but It shouldn't be a problem. Any…
My father had bought for me a toy scale model bulldozer made of steel in one of his trips to UK in the 1980s. I recently found it in my parents' house still in a working condition although the paint/enamel had started chipping off a bit.…
This model is designed for Miniplan ESP32 motor shield. You can use V7RC APP to control it.
Box for the Dirty Dozen Puzzle ( https://www.printables.com/de/model/84752-dirty-dozen-puzzle ) with a minor hint how to build the puzzle. Print Settings Printer Brand: Prusa Printer: Mini+ Rafts: No Supports: No Resolution: 0.2 Infill:…
If YOU have a Boomdozer sitting around taking up space, you're too poor to afford a Shellfish or a Breacher, or you just want a powerful modular shell blaster, then this design is for you. My cylinder (more of a spindle really…) holds 6…
logo marki energetyków ,,DOZE" tworzonej przez Kamila Labuddę (budda tv)
Dozer blade and front cover for HyperX mouse for when you need a little bit of extra space in your table for your mouse. Both files need supports but come out very esasily.
WHITE SPOTS IN IMAGE ABOVE ON ORCASLICER IS ME NOT REMOVING SEAMS. IT WILL NOT PRINT LIKE THAT. Using .4mm nozzle 1.75 PLA, works great down to around 20% scale size. D12 Logo (Dirty Dozen, Eminems band. Not a D12 Dice). Short print time…
Includes tabs for easy supergluing together. You will need something to rough up the tabs so they can bond together, as when PLA comes straight out of the printer there usually is ZERO surface for the glue to properly stick to. Sandpaper…
Baker's dozen number plate for apartment. Consists of 2 parts. There are holes in the front, pins in the back, align and glue (if necessary). I managed to fasten them together without glue. The number plate is not screwed, but glued…