flowerpot with leaves
flower pot with leaves design dimensions: diameter 100mm height 100mm
Print approx. €10.75–€13.14 excl. taxPreliminary estimate for one variant
- Downloads
- 215
- Likes
- 43
- Rating
- 0
227 models
flower pot with leaves design dimensions: diameter 100mm height 100mm
Print approx. €10.75–€13.14 excl. taxPreliminary estimate for one variant
This tool will help fix small holes at patch them up in a flash. Printing all the components took ~2.5 hrs and the actual speed weaving was less than 45 minutes including taking the photos for the tutorial. Notes for printing included…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
We have created a new base for the stem, with nice leaves. The stem is simply printed upright and can be printed perfectly, even the small one (like shown on the photo). Printing should be done slowly (about 45 mm/sec. *) and, if…
In the print settings tab select “ Spiral Vase mode”. A little over-extrusion width (e.g. 0.6 mm for 0.4 nozzle) does not hurt, then it is more stable.
Prints as 2 separate pieces that press-fit together. Take note of which base to use. One of them has a slot for a gift card and the other does not. The assembled height is about 10.5cm (4") tall. The base is 4cmx4cm or 1.5"x1.5" The…
This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…
Info: decorative organic leaves collection can be bent when heated (hair dryer for example) to look more realistic Print info: 0.2mm layer height no supports be sure to have perfect 1st layer but some bad 1st layer can also create…
A standalone design that beautifully complements the design of the thorny rose stem, but could also go well with other flowers. The sheets are simply printed flat on the print bed, also with a colour change. The twist of the matter is…
In the print settings tab select “ Spiral Vase mode”. A little over-extrusion width (e.g. 0.6 mm for 0.4 nozzle) does not hurt, then it is more stable. The files were provided by Lucretia @bergfex55_505553 in order to be able to present…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Coaster set remix
Collection of earrings inspired by the beauty of autumn leaves. To get a more natural look, you should bend the printed earring to whatever shape you like. It can be easily done after warming it up a bit - I have used the hairdryer. Print…
Simple yet sturdy book stopper, prints perfectly on the side.
These simple leaf earrings are meant to be printed with one of each size and attached to a thin chain. I also recommend printing with tulle! I've done these with green + green tulle, black + green tulle, and fall colors with corresponding…
A clean and easy-to-print vase model, perfect for home decor, plants, or display use. The model can be scaled freely to match your needs. No supports or raft are required, making it beginner-friendly and reliable to print. Tested…
If you like to dry leaves and flowers for their preservation, I suggest you build this press. Perhaps, it can also be useful for other tasks. The pieces are designed to fit solidly and have no looseness. You may need to remove the burrs…
Based on the original one (16 leaves), I created another 4 plants with different numbers of leaves (10, 12, 20, 24). Just choose the ones that fits your needs best. ;-) If you print this one, feel free to post a make - I'd really like to…
Fall Leaves Lantern LED Tealight or Votive Candle Holder Fall, Thanksgiving Decoration This is a 100x60x60mm LED Tea light or votive lantern. Layers of fall leaves are stacked inside a framed panel, with 4 panels and a base a lantern is…
This model is compatible with the lego system.
Christmas Door Trim Corner - Leaves of holly Berries🌿 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I…
In J.R.R. Tolkien's "Lord of the Rings," the "Leaves of Lórien" are brooches shaped like leaves, given as gifts by Galadriel to the Fellowship of the Ring as they depart from Lothlórien. A piece of filament of a given color is used for…
Heyho :) This is my Frame press for many different tasks. I personally use it for Tofu or to glue (long) things together in my workshop. Of course I don't mix them up xD You can use the press with one Frame set or even more. With the…
Use double sided tape or nail for mounting
¡Descárgalo y añade un toque maravilloso a tus proyectos! Altura: 10cm
Leaves Leaves is my original, never-before shared abstract strategy game. In the game, two players fight to have more leaves on the tree when the game ends. Each turn, new leaves are added to the tree , in an interesting fashion, pushing…
These files are intended for the most part for laser cutting.
This is a new 3 Hex Gloomhaven Tree to replace the existing overlay tiles (3). Since my bushes worked well, I decided to try the same treatment on a tree, which was even harder to print. I've got it worked out pretty well (although it…
A stamp wheel from the Nature Collection #19 These digital 3D printable models are meant to create textures in clay, polymer clay or EVA foam, and other materials. We want to make more models like this. If you want to let us know what…
This model is compatible with the lego system.
This model is compatible with the lego system.
Hi, ich habe die Tage noch einen weiteren Pflanztopf gezeichnet und mal ein bisschen mit Fuzzy skin im Druckprofil experimentiert. Wer das seine Topfboden ohne Fuzzy skin möchte, es gibt in den STLs noch eine weitere Version, in der das…
Original photos of fallen maple leaves make for a fun HueForge Experience! Play with colour and sizes to make a lovely array - I also used my heat gun to create some movement with the leaves. Maple Leaf 1 - Print at 100% infill with a…
2 Dimensional Monstera leaves for decor. These were printed with 5% infill and you can scale them to fit your needs.
Info: bent leaves autumn design napkin holder
This model is compatible with the lego system.
Print these leaves in TPU and paint them as you want. Category: Hobby
Another plant for tabletop gaming and a nice addition to the tables vegetation, which can be used in different scenarios like desert, jungle, swamp, alien planets, ... Should print just fine without support. Hope you like it. Have fun! If…
For best results, it is recommended use some lubricant and/or use more slippery materials for the leaves, but it still works fine without any lubrication. This design uses the same leaves as the original.
This model is compatible with the lego system.
This model is compatible with the lego system.
Another plant for tabletop gaming and a nice addition to the tables vegetation, which can be used in very different scenarios like desert, jungle, swamp, alien planets, ... Should print just fine without support. Hope you like it. Have…
This is a remix of ToolsToMars "Fall Leaf Decorations" model.
It's about that time… Show us those fall colors!! The leaves are changing and it's time to celebrate the season change. We designed these fun fall earrings so we could play with color and capture the moment. Size up or down but watch the…
🌿 The Diadem of Leaves – The Second Crown Mini story: When the Enchanted Forest lost its royal crown, the fairies brought forth the Diadem of Leaves. The missing stone in its center became more than a loss — it became a prayer, a symbol…
The original leaves jump out of their slots whenever a little force is applied. Since I love to play with this print, I had to adjust the design. Now the compass is way more rigid and the new leaves also simplify assembly. Pro tip: print…
Holly leaves and berries that fit on the Lego Wreath by MagnumDanger I printed the wreath at 70% and these fit rather well. I have not tested the 100% models to see how they fit a wreath printed at 100%.
I wanted a pattern to use on a bag I was making so I turned an image into STL and printed two plates of it, mirroring. When printing on fabric use the layer high same as fabric thickness, my Thule is 0.14mm. Also, it's good to use a…
A vase inspired by swirling autumn leaves. Print in vase mode (spiralise)
I remixed two other designs to add a little bit of plant-life leafy flair for a bathroom remodel we're doing. One of the walls is going to have black plant outlines of plants and flowers and leaves on a white background, so I had the idea…
Modelled from a retail design that works well with my own gutters. In print settings use 4 perimeter shells — see screenshot (print settings/vertical shells - Slic3r) Recommended print material: PETG (Less likely to snap in cold…
A minimal maple leaf pattern designed to bring seasonal warmth to your pages. No AMS/MMU required, only one color change. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with White…
🍃 Pattern Texture Rollers – Leaves A growing collection of 3D printable texture rollers with seamless leaf patterns , designed for adding decorative textures to clay, dough and other soft materials. The Leaves Collection includes multiple…
A set of Fall/Autumn ornaments to celebrate the season. You can print them in festive colors or in a matte white/primer grey so the kids can paint them. They are also a great print to use those last bits of filament for in order to be…
There's a great amount of RTK mounts for the YUKA (1. gen), but I couldn't the perfect match. Here's one with 90deg angle installation. Find the original antenna mount tube, in the source of this remix. Work-file added as attachment.…
We have specially prepared a 3D print model for you, optimized for the Original Prusa i3 MK3S+, ensuring that your decorations will look just as you imagined. Print Specifications: Nozzle: 0.4 mm Fill: 100% Layer Height: 0.3 mm…
Fun dangling earrings with oversized monstera leaves. There is a right and left version for the perfect framing of your face, but this can also be done in the slicer before printing. Size up or down but watch the size of the post hole.…
This model is compatible with the lego system.
This model is compatible with the lego system.
If you like it, please let me know. Share your makes <3 Print instructions Printer Brand: Prusa Printer: [i3 MK3] Rafts: No Supports: No Infill: 10% Filament: Amazon Basic PLA Black
I took the amazing Lantern design made by Laptop-Guy and made a few fixes he did for future lanterns. My biggest issue with the original was due to how it was assembled one side would end up thicker than the other so I added a 45 to the…
September Lego Wreath! Another version of the Lego Wreath. This one is 24" in diameter with 8 pieces. Print one with the hook, so you can easily hang it. Check out my page to see the studs I designed for the other months.
A dreamy fairy sitting on a lotus flower base with wide wings and flowing hair. Makes a beautiful centerpiece for a fairy collection.
Here is a fun/decorative model that is completely flexi right off the print bed! Recommended Printing Instructions: Layer Height: .15 Infill: 20% Supports: No Material: PLA Made From Scratch By Fidget Designs.
Oak branch with acorns and leaves Nice autumn decoration. The parts of the acorn are connected with a connector. When printing the leaf, switch the color at a height of 0.4mm - to highlight the leaf drawing For a more realistic look of…
This model is compatible with the lego system.
Použit Glowing Tree Backlit wall Art / Night Light, Walnut Finish - WallMantra
Fun dangling earrings with oversized maple leaves. Size up or down but watch the size of the post hole. You can also make a necklace or pendant for other forms of jewelry. For the findings to make earrings or necklaces: We like this set…
Fun dangling earrings with belladonna, deadly nightshade silhouette. There is a right and left version for the perfect framing of your face, but this can also be done in the slicer before printing. Size up or down but watch the size of…
We have specially prepared a 3D print model for you, optimized for the Original Prusa i3 MK3S+, ensuring that your decorations will look just as you imagined. Print Specifications: Nozzle: 0.4 mm Fill: 100% Layer Height: 0.3 mm…
Uses 3/4inch Schedule 40 PVC - tight fit so no glue needed 10x3mm magnets for the weave connectors (or just use the Weave Middles to extend) I didn't like the other PVC connectors I've seen so I modeled my own version to be much beefier.…
So my sister commented on my TeaBox that she really likes it and would like to use something like that in her own kitchen, she also has a birthday coming soon so…… I modified my original design to better suit her style :) (also can print…
Simple printing settings with any PLA
Add some fall colors to your decor with this Autumn Leaves cutout vase. Print just the vase for a subtle leaf impression, or print the included insert in your favorite fall leaf colors to really make it pop. Printing and Insert color swap…
Cool Mug coaster in monstera leaf design
We have specially prepared a 3D print model for you, optimized for the Original Prusa i3 MK3S+, ensuring that your decorations will look just as you imagined. Print Specifications: Nozzle: 0.4 mm Fill: 100% Layer Height: 0.3 mm…
Celebrating the legalisation of cannabis in Germany: This is a flowerpot with weed leaves on two sides, 102mm high, 108mm wide. I printed it in PLA in white (generic) and black (Prusa Galaxy Black) with a green leaf in Filamentum PLA…
Christmas-themed Bell with Leaves Cookie Cutter and Stamp — perfect for festive baking and decorating! Create beautiful holiday cookies and fondant decorations inspired by classic Christmas ornaments. Ideal for cookies, biscuits, fondant,…
Support for plants. Plant Trellis 3 sizes: smallest for 4 leaves, total height 17.6cm larger for 6 leaves, total height 25cm largest for 7 leaves, total height 29cm
We have specially prepared a 3D print model for you, optimized for the Original Prusa i3 MK3S+, ensuring that your decorations will look just as you imagined. Print Specifications: Nozzle: 0.4 mm Fill: 100% Layer Height: 0.3 mm…
Plantilla de 150 mm x 100 mm x 2 mm para dibujar varias clases de hojas de árbol
Controll the size with (Prusa) slicer. You might need the leaves in a differend size. Define in the slicer size x and y proportionally, then define z (height) indepently. Designed is 1mm heigth. Vase mode: Nice objects are created if you…
I am making some leaf models. This is an ongoing section so please stay tuned for more leaves added. If there is one you would like to use and its not on the list let me know and I will see if I can get it on here for you Category: Other
The Decorative Monstera Leaves panels is a chic and stylish addition to any home or office. Its elegant Monstera leaf design brings a touch of nature indoors, creating a lively and refreshing atmosphere. Plus, it's easy to print, making…
I bought some white PCB water resistant RGB Strips and wanted to stealthily mount them permanently to my house - to stop with the yearly chore of putting up/down the christmas lights. I didn't trust the double sided tape, so I designed…
Soap holder design inspired by tree leaves
Autumn Leaves on Rope. Use cotton or synthetic rope 2 mm in diameter. You can print two Leaders instead of Stopper to have both side input. Print settings (recommendation): 0.2mm resolution 5-8 walls 5 top/bottom layers 8-10% infill
This model is compatible with the lego system.
This is a remix of Muurph's excellent Pineapple Maze . The lid is modified so that the leaves are thicker and a bit easier to print. I was having difficulty printing the pineapple leaves in the original lid with a matte fiber fill PLA.…
Bring a touch of warmth, love, and nature to your space with this adorable patterned pumpkin! Designed with a blend of delicate leafy branches and cute embedded heart patterns, this print is perfect for autumn displays, desk decor, or…
Objective Be the last player to successfully place a leaf without knocking all the leaves down. For 1-4 players Setup Assemble the tree trunk. Place the branch in such a way that a leaf can be put into the slot without falling out (too…
This model uses clever spiral vase tricks to create 4 compartments and can be scaled to any size. Enjoy!
I had TPU in mind when designing this, a thin flexible layer between a coffee pot or beer mug and the desk's surface, just to shield off direct contact. A height of 1 mm works fine with TPU, change the Z-resolution in the slicer if you…
We have specially prepared a 3D print model for you, optimized for the Original Prusa i3 MK3S+, ensuring that your decorations will look just as you imagined. Print Specifications: Nozzle: 0.4 mm Fill: 100% Layer Height: 0.3 mm…
Here is a African looking tree I sculpted in Blender.
A simple model of Leaves of Lórien, suitable as a pendant or souvenir for children.
Protopasta has released new thermochromic colors just in time for the fall! We thought it would be fun to design some coasters for hot drinks on those cold autumn mornings! Print Settings Supports: No Resolution: .15-.2mm Infill: 8-15%…
A stylized rose with thick petals and a solid stem. Perfect as a gift
Bring nature indoors with this charming floral vase design. Ideal for home decor. Recommended settings: use supports, nozzle 0.4 mm.
just another door corner may be to large for build plate but you can scale it down.