Search results: ecke

Sort order

2,999 models

P
Printableskev

IKEA 365+ Lid Holder / Deckelhalter - 10 Slots

Remix of version V2.1 by Simon with 10 instead of 5 slots. Fits square lids with a length of 15 cm or rectangular lids with a length of 21 cm (upright) Printed using PETG | 30% infill | no supports required

Print approx. €10.85–€13.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9,068
Likes
3,316
Rating
4.97
P
PrintablesPawel

Box /Kiste mit Deckel Variabel / Box with lid

I have constructed a box here that can be changed via parameter input. You can download the file and change it via Fusion 360 or similar via the parameters. Make your own boxes sizes as you need them as in the picture above. Ich habe hier…

Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant

Downloads
1,179
Likes
64
Rating
5

Alles gute zum Geburtstag Kuchendeckel / Torte / Cake Topper

I maked a simple cake topper for german people. Ich habe ein einfach Kuchendeckel für Deutsch Leute gemacht. Material: PLA Enjoy.

Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant

Downloads
814
Likes
52
Rating
5
P
PrintablesFrankti

Deckel für CEE Steckdose Wohnmobil Caravan

Der Deckel war vorher mit Stift und Niete befestigt, der Druck ist für eine Einschmelzhülse M3 ausgelegt, und wird mit einer Schraube M3 x 20 befestigt. Ich habe den Deckel mit PETG gedruckt.

Print approx. €2.46–€3.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
509
Likes
64
Rating
5
P
PrintablesMa Gu

Blinddeckel für Busch Jäger Reflex SI Abdeckrahmen

Slicer: PrusaSlicer 2.5 Nozzle: 0,4mm First layer height: 0,2mm Layer height: 0,16mm Infill densitiy: 10% Fill pattern: Adaptiv Cubic Generate Support material Alle exakten Slicer Einstellungen sind im .3mf File eingebettet Druckzeit etwa…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
448
Likes
47
Rating
5
P
Printableslogi788

Schutzdeckel für 13 pol. Stecker - Anhängerstecker / Trailer Protective cover 13 pin V2

Mein Anhänger steht immer draußen und der Stecker setzt sich mit der Zeit mit Dreck zu. Damit der Stecker immer schön sauber bleibt, habe ich diese Schutzkappe konstruiert. Die Version wurde etwas angepasst, damit die Dichtung vom Stecker…

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
404
Likes
28
Rating
5
P
Printablesoltas

Feder für Sony Objektivdeckel, spring for sony lens cap

Ich habe die Ferdern für 55 und 72mm Objektivdeckel entworfen. der Remix von Martin stellt eine Version für 49mm Objektivdeckel bereit I designed the springs for 55 and 72mm lens caps. Martin's remix provides a version for 49mm lens caps.

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
339
Likes
71
Rating
5
P
PrintablesMinietec

Bottle cap for Kavodrink Tritan / Deckel für Kavodrink Tritan Flasche

The bottle cap fits on ‘Kavodrink Tritan’ bottles. There are two versions: one without knurling and one with knurling. If you want to be extra safe that your print is food-safe: How to make food-grade 3D printed models - Prusa Printers

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
306
Likes
19
Rating
5
P
PrintablesMadeinSwabia

Sink Strainer / Gully Cover - Sieb für den Waschbecken-Abfluss

Hello friends from all over the world :) This is my sink strainer / gully cover in the bathroom. The diameter of my sink is 40mm. If someone likes this Design, it would be great if you also give it a like and post a make ;) - - - - - - -…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant

Downloads
303
Likes
27
Rating
4.8
P
PrintablesmoWerk

Birthday Cake Topper Numerals | Leckerli One Font Numbers

Leckerli One Font Cake Topper Numerals 4cm high numerals, easily scalable (150% = 6cm, 200% = 8cm, etc.) Use the mirrored versions in case you like to have your buildplate pattern on the front. Font licensing The font “ Leckerli One ” was…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant

Downloads
294
Likes
36
Rating
5
P
Printablesudrek

Yurtle The Long Necked Turtle: Completely 3D printed!

This model uses a torsion spring to pull the head and neck back into the body. It is extremely satisfying to play with, and the model (at 100% scale) works great! I haven't had time to play around with the scaling, but I wouldn't go too…

Print approx. €6.07–€7.42 excl. taxPreliminary estimate for one variant

Downloads
220
Likes
51
Rating
0
P
PrintablesVinnland

Deckel für Gießkanne / Lid for watering can

Bei mir tummeln sich kleine Vögel auf dem Balkon und ich hatte immer Bedenken, ob nicht mal einer der Chaoten in die Gießkanne fällt und eventuell nicht mehr rauskommt. Gerade weil ich auch schon übermütige jungen Spatzen beobachtet…

Print approx. €2.84–€3.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
186
Likes
26
Rating
5
P
PrintablesHarryLasVegas

Lechuza Filler Cover / Füllschachtdeckel 50x50 for Balconera

This 50x50 filler cover fits on the Balconera Series (50 or 80). You get two files: the one with the hole and one without any hole. Please note: despite all Lechuza filler covers look the same on the Lechuza site, they have different…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
163
Likes
23
Rating
5
P
Printablesthefitthings

Kitchen Aid front cover \ Kitchenaid Deckel vorn

If you have lost your front cover, this is now the opportunity to simply print a new one. Wenn sie ihren Frontdeckel verloren haben, ist das jetzt die Möglichkeit sich einfach einen neuen zu drucken. Printed in PLA - 100% Infill

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant

Downloads
118
Likes
16
Rating
0
P
PrintablesTimmaey

Ceiling Hook / Deckenhaken

Install with an M3 or M4 countersunk screw. I printed it as follows: PETG .1 mm layers .4 mm nozzle no supports 5 perimeters Would love to see your makes! :)

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
112
Likes
9
Rating
5
P
PrintablesMek

Pot lit holder / Topfdeckelhalter

Pot lid holder with spoon rest and drip tray. Alternative: with pillar made of aluminum tube 40x10x150mm. Topfdeckelhalter mit Löffelablage und Auffangwanne. Alternativ: Mit Säule aus Aluminiumrohr 40x10x150mm.

Print approx. €1.66–€2.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
104
Likes
18
Rating
5
P

Deckelhalter für Petromax FT6 Dutch Oven

Drucken Sie den Halter 3 mal aus und stecken Sie ihn rundherum auf den Dutch Oven.

Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
11
Rating
0
P
PrintablesLevi

Chinese Checkers Game Board

Print details: I printed with a 0.8mm nozzle, but any size will work. There is a pause in the included G-code files to insert the magnets. There are hidden pockets that fit the magnets in the link below. Make sure the poles are matched up…

Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant

Downloads
93
Likes
18
Rating
0
P
PrintablesPeopleware

Bosch Cookit Offener Deckel Revision 2

Revision 2 Dies Das ist Revision 2 des offenen Cookit Deckels und ersetzt die beliebte Vorgängerversion . Diese Revision ist passgenauer und vor allem formstabil. Die Vorgängerversion verformte ich mit der Zeit vor allem bei…

Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
84
Likes
11
Rating
5
P
PrintablesZohan#4775

Ikea 365+ IHÄRDIG Gewürzglas / Gewürzmühle schraubbarer Deckel

Schraubbarer Deckel zum sicheren Verschliessen von Gewürzen und Kräutern der sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma, Netto…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
22
Rating
5
P
PrintablesThe Shrimper

Checkers Piece

Just a checkers piece, since I always seem to lose one. The model is only a half, so you will need to print 2 of them and glue them together. I recommend 30% Infill, just to give the piece a bit of weight, otherwise 10% is more than enough.

Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
8
Rating
0
P
PrintablesOli4CH

Jaw stretcher (Kiefer-Strecker, Kiefer-Dehner, Kieferretter)

With this jaw stretcher, you can relieve tension in the jaw muscles . Tense muscles in the jaw can cause all sorts of things: a painful jaw joint, tinnitus, facial pain, migraines and even neck and back pain. The jaw stretcher can help:…

Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
71
Likes
7
Rating
5
P
PrintablesGamerMechanic81

4-Player Chess or Checkerboard (warped squares)

This should print just fine on a prusa mini or larger. Print 4 of these boards and lay them oiut to make an octogon. Chess starting positions are on the split sides. of the octogon. Print cehss or checkers pieces at .5" in diameter at…

Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
10
Rating
0
P
PrintablesRPK

Lid knob replacement / Topfdeckel Knopf Ersatz

EN: Had a lid with a diameter of approx. 23.5 cm where the existing knob broke off. The hole for the screw measured 4.7 mm. I wanted the stem of the knob to also fit through the hole in the jar as a centering device and I also needed a…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
6
Rating
0
P
PrintablesNimbus

bolt for "trash bin for sweeper car"/Bolzen für Mülltonnen-Deckel

I printed some "Trash Bin for Sweeper Car" https://www.printables.com/model/324597-trash-bin-for-sweeper-car-popelnice-pro-cistici-vu). I use them to collect filament poop from changing material, support structures etc. But there is no…

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant

Downloads
57
Likes
5
Rating
0
P
PrintablesMadtom

Sieb für Spülbecken (Sink strainer) Breite / wide 16cm

Ein Sieb für ein 16cm breites Zusatzspülbecken. Strainer for a 16cm wide sink. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0,20 Quality Infill: 20% Filament: Prusament PLA Category: Kitchen & Dining

Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
4
Rating
0
P
PrintablesStefan Skotty

Buddy3D Camera Mount Befestigung Deckel

Ein Ersatz-Deckel für die Befestigung der Buddy3D Camera.

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
7
Rating
5
P
PrintablesDaki3D

Einwegglas Deckel mit Schieber 80mm

Der Deckel geht am Anfang etwas streng, das legt sich mit der Zeit, man muss nur ein paar mal hin und her schieben. Danach kann man es auch mit nur einer Hand verwenden. Was praktisch ist und somit muss das Glas nicht mehr geöffnet…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
48
Likes
12
Rating
0
P
PrintablesJoergH

Black&Decker Workmate WM550 - 4 Loch Halter für Spannbacken Bench Block Holder

Black & Decker Workmate WM550 Type 9 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black

Print approx. €9.17–€11.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
10
Rating
0
P
PrintablesJoergH

Festool Systainer Sys3 mit Deckelfach - Kegelsenker Einsatz

Kegelsenker Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Kegelsenker 1: 12.4mm Kegelsenker 2: 16.5mm Wenn der große Kegelsenker kippelt kann unter dem Schaft eine Stütze eingeklebt werden. Filament: Verbatim grau PLA

Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
15
Rating
0
P
Printableslivius

Checkers game board and pown

Simple pown for checkers game + board. Photos as always worse than real object. 3mf file for board have 3 color change, first for numbers and letters, second for field color, third for second field color. You can add another color change…

Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
7
Rating
0
P
PrintablesLudi

Schutzecke für Spanngurt 25mm / Protective corner for tension belt 25mm

Zum Schutz von Hartschaumboxen oder Spanngurten 25mm an den Ecken To protect hard foam boxes or tension straps 25mm at the Corners

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
41
Likes
8
Rating
0
P
PrintablesGbarneby

BGS (Beckett) HoneyComb Wall Card Stand

I use the PSA / Beckett card stands a lot for my display cards in my office, but I am in the process of printing a honeycomb wall for my office and as this is a playing card rather than a TCG card it doesn't quite fit with the rest of my…

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
2
Rating
0
P
PrintablesM3DDruck

Kleine Verteiler Box für Decke

Dies ist eine Verteiler Box für die Decke. Ich habe darin einen ZigBee SmartSwitch angeschlossen der dann eine Lampe Steuert.

Print approx. €1.73–€2.11 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
2
Rating
0
P
PrintablesAlvomane

SKYRC MC3000 XT60/banana plug adaptor | XT60-/Bananenstecker-Adapter

This is an XT60/banana plug adapter for chargers with large charging slots (72mm), such as the SKYRC MC3000. Crocodile clips can be connected to the adapter to charge individual rechargeable batteries at their solder lugs without the need…

Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
36
Likes
11
Rating
4
P
PrintablesDarkmoon

SilkaGel Gehäusedeckel mit Feuchte-Temp Messung

Deckel mit Messgerät für SilkaGel-Behälter.

Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
35
Likes
5
Rating
0
P
PrintablesJoergH

Black&Decker Workmate WM825 - Stanley Deluxe - 4 Loch Halter für Spannbacken Bench Block Holder

Black&Decker Workmate WM825 - Stanley Deluxe 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black

Print approx. €8.46–€10.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
30
Likes
3
Rating
0
P
PrintablesFlex1

TS-8 Rack-It - Woodpeckers

Rack-It bracket to safely secure your TS-8 Pocket T-Square.

Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
7
Rating
0
P
Printablesthomergil

Black & Decker WM2000SD Waffle Iron Foot Stand

Prints without supports. Make sure to print it upright on the narrow straight end; print files provided that demonstrate how. Recommend 0.2mm layer.

Print approx. €2.28–€2.78 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
4
Rating
5
P
PrintablesCAR

Leaf Blower Replacement Power Switch - Black & Decker Cordless Leaf Blower (LSW321) - Accessibility Redesign

This is a redesigned power slider switch button for the Black & Decker Cordless Leaf Blower (LSW321). My aging mother no longer has the full function of her hands due to arthritis. This presents a problem as she is unable to apply the…

Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
2
Rating
0
P
PrintablesGeorge_Andreou

Black & Decker 18v lithium ion battery holder with multiconnect for opengrid

This is the same holder as the original but with a multiconnect connector spaced to fit the opengrid system. I printed this in PLA with 0.2 layer height, 0.4 nozzle and organic supports on build plate just in case. Fits snuggly but not…

Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
2
Rating
0
P
PrintablesBack-rs3

Öl Verschlussdeckel AUDI VW SEAT SKODA (4Pins) 05E 103 485

Universal Öl-Einfülltrichter- Adapter Trichter Ölwechsel Einfüllhilfe KFZ Adapter für AUDI VW SEAT SKODA (4Pins) 05E 103 485 C bis 31.12.2019 1,5L PR: DS9 / D8I 05E 103 485 J ab 01.01.2020 1,0 Grundmotor TJ4 / TC5 1,5L D8I / T3KJ…

Print approx. €1.85–€2.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
3
Rating
0
P
PrintablesPeopleware

Deckel für Aufbewahrungsbox mit Optionaler Ladefunktion für Original Apple Watch MAG Ladekabel

Die Beschreibung dieses Deckel Set richtet sich vor allem an diejenigen, die das u.a. bei Amazon erhältliche “ Brandsseller Aufbewahrungsbox Dekobox - Rattan-Optik - 3er-Set schwarz” (Link: https://amzn.to/3VxbGMG ) bereits besitzen. Ich…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
4
Rating
0
P
PrintablesJoergH

Black&Decker Workmate Riegelkappe Schutzkappe Knopf Stanley

Bei den neueren Workmates werden sogar die Kunststoffteile eingespart: Der scharfkante Hebel zum Ver/entriegeln hatte früher eine Schutzkappe - Hier meine Version zum Nachrüsten. In gelb die Version für Stanley, orange für Black&Decker.…

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
0
Rating
0
P
PrintablesGamerMechanic81

Chess N Checkers (Mid Century Modern Chess Set) American Greetings 1972

These pieces have been scanned then modeled and should be reasonably dimensionally accurate to the originals. The original release included a rather odd 10.125" square checkerboard which I have also modeled and included as a multicolor…

Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
6
Rating
0
P
PrintablesJoergH

Metabo AS18 Staubsauger Verschlussstopfen Verschlusskappe Kappe Deckel

Verschlusskappe, damit bei abgezogenem Saugschlauch kein Staub austreten kann. Die TPU Dichtung muss bei jedem Drucker angepasst werden, somit geht hier auch jeder andere Staubsauger. Ersatzweise kann für die Dichtung auch ein Filzring…

Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
1
Rating
0
P
PrintablesJoergH

Black&Decker Workmate WM550 - 1 Loch Halter für Spannbacken Bench Block Holder

Black & Decker Workmate WM550 Type 9 1 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black

Print approx. €2.21–€2.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
0
Rating
0
P
Printables3DHippo

Lampshade for "LED-Deckenfluter Helia rund"

This is for the one Person who might have the same problem as me. You dont need any support while printing this. If you are not sure if this is the right one, this is the one I bought:…

Print approx. €4.29–€5.25 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
2
Rating
0
P
PrintablesManü

Halterung für 68mm Deckenspot

Halterung für 68mm Deckenspot Bestelllink: linovum WEEVO 6er Set IP44 Einbaustrahler LED 230V rund - runde Deckenspots warmweiß 3,5W Bad & Außen - flacher Einbau 29 mm : Amazon.de: Beleuchtung

Print approx. €9.51–€11.62 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
0
Rating
0
P
PrintablesNorberto

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
2
Rating
0
P
PrintablesWannseesprinter

Nubert nuBoxx BF-10 Dolby Atmos Deckenhalter | Ceiling holder

-english version see below- Die Halterungen sind so dimensioniert, dass noch Platz für ein 2,5 mm² Lautsprechkabel ist und ggf. der Rest davon im Hohlraum zwischen Decke und Lautsprecher untergebracht werden kann. Außerdem sind die Maße…

Print approx. €5.30–€6.48 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
0
Rating
0
P
PrintablesSuperdry78

Deckel und Boden für Kartonrolle -> DOSE

3 Teile um den Karton in eine Dose zu Verwandeln.v

Print approx. €8.61–€10.52 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
2
Rating
0
P
PrintablesJ.S.

Nascard Route Segment (Strecken-Elemente, Devir)

Die "Strecke" bei dem Spiel Nascard verrutscht sehr gleich. Durch die gedruckten Strecken-Elemente bleibt die Rennstrecke auch beim Verschieben der Autos fest an ihrem Platz. Es werden 4x die Strecken-Elemente benötigt.

Print approx. €3.82–€4.66 excl. taxPreliminary estimate for one variant

Downloads
2
Likes
0
Rating
0
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Downloads
6,962
Likes
1,151
Rating
4.79
P

Chips Pringles Slider Chip Rutsche Big and Normal Deckel Xl Chip

Have fun :) Both Versions 3 Wände / 3 Walls 15Infill Bambu also 2 Colors or other Printers with Break :) Regards

Downloads
4,741
Likes
391
Rating
4.57
P
PrintablesStefan T.

Bottlecap - Tinopener / Flaschendeckel

Beschreibung Ich habe ein Hybrid Modell erstellt nachdem es bereits den einen oder anden Dosen- und Flaschenverschluss gab habe ich die beiden kombiniert. (der Dosenverschluss kann auch zum Öffnen genommen werden. Drucken kann man ihn aus…

Downloads
2,733
Likes
766
Rating
4.83

Klappdeckel für Bierflasche (print in place)

Hier könnt ihr euch Print in Place Deckel für eure Bierflaschen drucken. Gedruckt werden können sie aus PLA Material mit min. 2 Wandlinien, 0,2mm Layerhöhe und 15% infill. Es gibt nach Rückfragen nun auch eine Schweizer Variante welche…

Downloads
2,537
Likes
678
Rating
4.86
P
PrintablesMar Ber

Box with hinged lid & clip close | Scharnierdeckelbox mit Bügelverschluss | FUSION 360 file

english First of all: I appreciate every like and every rating. A small box with a hinged lid. It is suitable for medium sizes. As in my small box (…

Downloads
2,237
Likes
212
Rating
5
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink 2.3

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Downloads
2,098
Likes
488
Rating
5
P
Printablesaring

Halterung für GAS-Flaschen Schutzdeckel

Halterung für den Schutzdeckel der Gasflasche. Im WoMo fliegt der meist in irgendeine Ecke und man findet ihn nicht wieder. Der Halter kann im Gaskasten angeschraubt oder einfach nur geklebt werden. Der Schutzdeckel ist sicher verwahrt.…

Downloads
2,011
Likes
124
Rating
5
P
PrintablesLazarus

double decker beer koozie

A double decker koozie, double walled for better insulation and capable of fitting two 12 oz cans. Load from the bottom

Downloads
1,952
Likes
112
Rating
5
P
PrintablesRevenger

Schüsselanhänger Trecker (Keychain tractor)

Kleiner Schlüsselanhänger im Trecker Design. Es gibt zwei Varianten. Bei der ersten sind die Kotflügel und Motorhaube höher als der Rest, bei der zweiten sind die Räder höher. Das Modell ist etwa 3,5 x 3 x 0,5 cm groß. Meine Modelle…

Downloads
1,674
Likes
150
Rating
5
P
PrintablesKalleKnall

OPEL Astra J washer fluid reservoir cap / Wischwasserbehälterdeckel 13227300

To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…

Downloads
1,632
Likes
146
Rating
4.88
P
Printablesmuddymaker

Utility Case Double Decker

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE Jan 30th: Utility Case Carry Rack System for this…

Downloads
1,611
Likes
575
Rating
5
P
PrintablesLegoRJ35

Sparschwein mit Deckel

Das Original war komisch gemacht die Öffnung war zu und musste nachträglich geöffnet werden um den Deckel zu verwenden.

Downloads
1,550
Likes
106
Rating
4.86
P
PrintablesJoel C

Black & Decker Workmate Peg

I designed a replacement peg for my BLACK and DECKER Workmate portable workbench. The original part works just fine, however, I needed a few more as several have gone missing over the years. I tried to remain true to the original design…

Downloads
1,482
Likes
442
Rating
4.96
P
PrintablesCisco3D

Double Decker Tray

Print with no Support and available in two versions (with or without hooks) also, Fits on Prusa Mini. Make it a bit taller if your printer can, specially if you plan to hang eyeglass. Cheers

Downloads
1,435
Likes
742
Rating
5
P
Printablesoftech

Pot lid holder (expandable) / Topfdeckelhalter (Erweiterbar)

English: Expandable pot lid holder. Each print is for 2 pot lids. There is a start piece ("Topfdeckelhalter_Anfangsstueck.stl"), a middle piece ("Topfdeckelhalter.stl") and an end piece Length: 131mm Width: 140mm Height: 100mm Towers…

Downloads
1,409
Likes
201
Rating
4.78
P
PrintablesAlvomane

Miele PowerDisk compatible lid | Miele PowerDisk kompatibler Deckel

Kudos to Robert Schiele for the brilliant idea to design a lid for the Miele PowerDisk ! My first PETG prints in 100 and 100.5% scaling were unfortunately not a success. They were too tight and did not fit. Update 04/23/23: Then I scaled…

Downloads
1,385
Likes
74
Rating
4.9
P
PrintablesNilsGFX

SPEISEQUARK DECKEL | GUT UND GÜNSTIG QUARK DECKEL | EASY PRINT!

Unser Quark ist immer alt geworden, da es keinen richtigen Deckel gibt. Ich habe einen simplen slide-on Deckel entworfen. Sollte dieser nicht passen, schau mal hier vorbei (Neuere Version):…

Downloads
1,232
Likes
81
Rating
4.75
P
PrintablesJerry Lee

Roll-up Chess/Checker - magnetic *** UPDATED***

Background: First of all, this was inspired by a commercially available product. However, as reviewers indicated, the pieces do not stay in place as intended, and does not include checkers pieces. So, the challenge to design a portable…

Downloads
1,225
Likes
1,093
Rating
5
P
PrintablesStefan T.

lid holder - Deckel Halter -TM5 - TM6

Dieser Halter kann genutzt werden um den Deckel eine Thermo**x direkt an dem Gerät zu befestigen währen man ihn mit Zutaten füttert. You can fix the Lid of an Thermo**x direktly on the Maschine while you add some incredians. 2024-01-03…

Downloads
1,206
Likes
113
Rating
4.96
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink v2

ACHTUNG: HIER IST DIE NEUE v2.3 VERSION: LINK Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke…

Downloads
1,177
Likes
178
Rating
4.5

Halter Steckerleiste Steckdose für Werkstatt, Werkbank, Steckdosenleiste, h=40mm, b=55mm

Zur Befestigung von Steckdosenleisten an der Wand, Werkbank oder am Tisch habe ich diesen Halter erstellt. Der Halter kann für Mehrfachsteckerleisten mit Schalter verwendet werden. Benötigt werden zwei Halter für eine Leiste. Die Halter…

Downloads
1,077
Likes
96
Rating
5
P
PrintablesSASSy Design

Checker Plant pot and Planter - Vase mode design

A simple floor pattern inspired plant pot Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower layer…

Downloads
1,075
Likes
289
Rating
5
P
PrintablesOneiro

Painters Pyramid / Malerpyramide / Malerecke

English It's just a small painter's pyramid. The existing templates were either too big for me or too unstable. I've tried to find a good balance. The pyramid is only 25mm high and (in contrast to the templates found) not so sharp at the…

Downloads
1,073
Likes
99
Rating
5
P
PrintablesDJ

Halterung Wallbox-Ladekabel mit Typ2 Stecker

Wandhalterung für ein Wallbox Ladekabel mit Typ 2 Stecker. Das untere Loch ist von den Maßen her so erstellt, dass man mit der “Nuss” einer Knarre hineinkommt. Fotos werde ich noch einstellen.

Downloads
1,070
Likes
45
Rating
5
P
Printablessmuk3d

Toy Wood Train Track / Spielzeug Holzeisenbahn Schienen / Bruecke Auffahrt / BRIO Thomas IKEA eBay kompatibel

Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words printing on the sind works for me .. a new version v2: a little higer so that can drive an train under the upper rails Category: Mechanical Toys

Downloads
1,058
Likes
134
Rating
4.64
P
PrintablesMaximus Marchi

Alan Becker Stick Figures

The stick figures from Alan Becker's videos! made in Fusion 360

Downloads
1,029
Likes
68
Rating
5
P
PrintablesKlaus

Wall mount for type 2 plug and Juice Booster 2 (electro mobility) - Wandhalterung für Typ 2 Stecker und Juice Booster 2 (Elektromobilität)

You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…

Downloads
974
Likes
71
Rating
4.82
P
PrintablesMLS

Table Cloth Clamp / Tischdeckenklammer

Hier eine Tischklammer bzw. Halter für Tischdecken, die hoffentlich länger halten als die gekauften, welche nach dem 2. Mal anbringen schon zerbrechen. Gedruckt mit PLA+; das ist einerseits relativ elastisch und andererseits ziemlich zäh.

Downloads
970
Likes
75
Rating
5
P
PrintablesJace1969

Wrecker Bad Batch Helmet

One of my favorite Characters that due to my personal size would suit me well for the next suit come project. After 5 years of learning to 3d model. I'm happy to show off this latest rendition of my work. I'm still learning each and every…

Downloads
968
Likes
181
Rating
5
P
Printablesm.a.g.

Dose mit Gewindedeckel / Can with threaded lid

Dose mit Gewindedeckel. Durchmesser 80 mm

Downloads
959
Likes
31
Rating
4.5
P
PrintablesMB Designs

Checkers Set With Crown Pieces

This is simple checkers set with crown pieces. When your player reaches the first row of your opponents side it becomes a king and can move forward and backward. Instead of stacking pieces you actually give them a little crown to show…

Downloads
958
Likes
199
Rating
5
P
Printablespatrick82

IKEA Deckel Halter

Halter für die IKEA Deckel ( IKEA 365+ Deckel, rechteckig/Kunststoff - IKEA Deutschland ) Es passen in den großen Halter 9 große Deckel und in denkleinen Halter 2 mittlere Deckel, ein runder und 5 kleine Deckel. Gedruckt in PLA Holder for…

Downloads
940
Likes
370
Rating
5
P
PrintablesmpoxDE

BLNAN LED Deckenleuchte Negativ-Ecken für CYMK Lithophane

Auf der Suche nach dem perfekten LED Rahmen für Lithophane, bin ich auf ein Flurlicht mit nützlichen Funktionen gestoßen. Das LED Licht kann gedimmt, in der Farbtemperatur eingestellt und mit einem Schukostecker ausgestattet werden. Mit…

Downloads
906
Likes
75
Rating
5
P
PrintablesArmourist

Checkers

This is a checker that I designed to go with the Mininalist Chess Set found here: https://www.thingiverse.com/thing:2552392 I printed them at 60% to fit the chess board that I created. That can be found here:…

Downloads
904
Likes
53
Rating
5
P
PrintablesZeratulCosplay

Can Lid (Dosendeckel)

Ich habe den vorhandenen Druck (vielen Dank dafür Milos V.) einfach gescaled bis er für die 4 Üblichen Dosengrößen gepasst hat. Die Bezeichnung richtet sich nach dem Umfang der Dose. (siehe Beispielbilder) (1) Dosendeckel_64,5mm…

Downloads
897
Likes
105
Rating
5
P
PrintablesAllpa

Milwaukee Packout Bin Dividers & Lids // Trenner und Deckel für Milwaukee Packout Kisten

Spare parts and complementary accessories for your Milwaukee Packout storage boxes and organizers! Accurate fit, extremely stable (more stable than the original) and suitable for all variants. With the dividers you can divide your boxes…

Downloads
840
Likes
153
Rating
5
P
PrintablesNilsGFX

PET Gewinde Deckel Lid

Simples PET Gewinde, gedacht für Erweiterungen und Remixes! Gut geeignet für 3D-Druck-Geocacher! Gedacht um leicht an andere Objekte zu kleben oder direkt in Fusion 360 anzubauen. Simple print 0.15mm for best results!

Downloads
813
Likes
22
Rating
0
P
Printablese_cubed99

Armanov 100 Rd Checker Quick Loader

My attempt at building a funnel for the Armanov 9mm ammo checker / gauge. Was designed to print in two parts, a vertical shell that surrounds the checker and the funnel part which nestles into the shell and funnels loaded cartridges into…

Downloads
802
Likes
54
Rating
4.67
P
Printablesaring

Kartuschendeckel

nützliches Zubehör für Kartuschen zum Beispiel Silikon, Acryl oder Dichtmasse. Mit dem Deckel trocknet der Inhalt nicht so schnell aus und man kann die Kartusche auch geöffnet mal in die Werkzeugkiste legen. Das Gewinde entspricht einem…

Downloads
791
Likes
80
Rating
5
P
Printablesbigovereasy

Flexible Checkered Napkin

This design, while intended for use with an ams/ace system, BUT if you wish and do not have multi-color printing, you can manually change the filament on your 3D printer (the last layer is the second color). Use the Base+Top_9x9_wm. For…

Downloads
789
Likes
335
Rating
5
P

Laserpecker Jig Base

Credit to IOK / 이성인 https://blog.naver.com/leesi11 Allowed me to post here for others to find. Jig which covers the LaserPecker Stand compatible with the L1 Pro Autostand and LP2 Stand. Print plate upside down to avoid using supports for…

Downloads
764
Likes
65
Rating
5
P
Printablesherbert

Snail Trap / Slug Feeder / Schneckenfalle

Having lots of snails in my garden eating my veggies. I need to feed them with special snail food ;) after every rain the food was lost and I needed to put new food out there. Searching the Internet, I found some great products to buy or…

Downloads
764
Likes
86
Rating
4.87
P
PrintablesPoke2

kleine Aufbewahrung Box mit Deckel / small storage box with lid

Eine einfache kleine Aufbewahrungsbox mit Deckel aus PLA. Ist fast ident wie meine Feuchttücher Box, nur der Deckel hat mehr Spiel und für das Gelenk habe ich 2x Schrauben M3x12 mit 4x Beilagscheiben und 2x Sicherungsmutter vorgesehen. A…

Downloads
735
Likes
53
Rating
5
P
PrintablesWaDMatrix

Teebeutel Spender ( tea bag dispenser ) mit Deckel

Modell mit Kante ist für die Montage mit dem Kleben vorgesehen. Damit hält die Klebung besser. Deckel hinzugefügt, danke an “ Wendelburg ”

Downloads
729
Likes
237
Rating
4.67
P
PrintablesOhneName

Sagrotan / Dentol Nachfüll Deckel

Layer 0,13 - 0,15 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.15 Infill: 20% Filament: PLA Matt Weis Notes: Layer 0,13 - 0,15 Kategorie: Badezimmer

Downloads
708
Likes
41
Rating
4.83
P
PrintablesvmLOGIC

Chess & Checkers travel case (Schach, Dame, Mühle)

ENGLISH (deutsche Beschreibung weiter unten) A set consisting of three popular board games in a compact case: Chess Checkers Nine-mens morris The beautiful chess pieces were modeled by Jacob G:…

Downloads
695
Likes
180
Rating
4.88
P
PrintablesvmLOGIC

Checkers Add-On for the Magnetic Chessboard

Add-on for the Magnetic Chessboard with a set of checkers pieces and a matching storage box. If you like my Magnetic Chessboard and also play checkers, then this is for you. It is only 2 cm high and is attached underneath the existing…

Downloads
659
Likes
409
Rating
4.8