45 models
This is 3D printable model of the Constitution Refit NCC-1701-A Enterprise from the Star Trek. It is a kit and does not require any glue. The different colored parts are separated for easier printing. Pieces of the necelles need to be…
This is 3D printable model of the NX Refit NX-01 Enterprise from the Star Trek. It is a kit and does not require any glue. The different colored parts are separated for easier printing but some painting is still required. For the…
An open-source frame-fit hook generator for openGrid . This model attaches directly to the frame of an openGrid board, so it does not need a separate snap or openConnect connector. The default settings generate a compact hook for holding…
Made the two halves into one solid.
The 1979 Enterprise refit as seen in the first 6 movies. It's been split into parts to make it easier to print it larger and in more than just 5 colors. The .3mf files were created in prusa slicer. Any cubes in the model should be…
Before you ask, yes, I do plan on making the Miranda-Class too. It would be unconscionable to leave it at the Enterprise. Where I go from there, only time will tell. I know it's a lot of files, but trust me, it's worth it. I designed it…
The source marked this model as adult content.
・Assembled tissue case with Japanese pattern ■ How to assemble Insert 4 plates on top of "tissue_case_base.stl". Put "tissue_case_lib.stl" in the corners of the plates. Add "tissue_case_top.stl" at the end and you are done. * A clearance…
I made this to help keep the extra part of the belt secure. Because this is a belt made for a holster, IWB, you need a little extra length when you do carry. This great little American Flag part helps keep it under control. Make sure for…
These files are intended for use with the TOMY TMP Refit Enterprise diecast collectible. They are non-permanent additions that can be removed or replaced as needed, at any time. As such these additions are non-invasive and do not…
I made an ice-scraping Multi-Tool and combined it with a Car Fuse Removal Tool (https://www.printables.com/de/model/74123-car-fuse-removal-tool … Big Thanks to jarza for that) as well as a belt cutter and glas breaker. *** VERY IMPORTANT…
Since I remixed and re-skinned the Valkyrie, why not add a spoiler and change the gun configuration on the landing bays? Not lying, I dig the look. Canon or not (Wiki says it is) it is a design I am very fond of. I have not test printed,…
Make sure your printer is well calibrated and be a little gentle when pressing in the amazefit core for the first time. Needs a 22mm elastic band. You can pick either of the buckles. Printed in PETG with supports for the rounded overhangs.
this is the refit for the Agamemnon-class. There is a strike dagger in some f the photos the is for reference and is not in the download. WIP as not tested, desinged for resin printing, not FDM, if you can get it to work, let me know.…
A bobbin for Singer Inspiration series 4200 sewing machines. It is design to interlock with the machine's bobbin winder pin the same way as the original bobbins. Source file for Fusion 360 included Printing instructions It prints in two…
Original model: https://www.printables.com/model/970512-defcon32-badge-d-pad-and-ab-buttons-dc32 Shoutout to pix3l8e for including the .f3d files to make remixing easier. I printed my version using matte PLA and standard quality in Cura…
Custom wall mount plate designed for the DIYLESS OpenTherm Thermostat 3, compatible with the Nefit/Bosch thermostat mounting standard. No junction box needed—mounts directly to the wall. PETG recommended for a secure and accurate…
As industrial design students we hand around a lot of workshop machinery, things like shrapnel, dust, and debris are common dangers if you're not wearing safety glasses. even tho the benefits are clear, a lot of people don't like to keep…
Cover the face of the 2020 excursions on the delta flyer refit by Rolohaun
The Lifefitness treadmill endcaps can easily break off because they have long, injection molded screw inserts. This replacement press-fits into the end pipe and latches on. The right side is provided. To print the left side, scale it…
The SecureFit Stock Battery Holder is a custom-designed CAD solution made specifically for 7.4V 1450mAh LiPo Double Stick batteries with Mini Tamiya connector . It fits directly into compatible airsoft stocks and holds the battery firmly…
https://www.dropbox.com/scl/fi/2ww611knefv24lxs8k7zz/example-of-both-lids.mp4?rlkey=2d20vxtzsfbiueqn7opoq62fm&dl=0 The lid was too loose for my liking. When I pulled the toilet paper through the lid would come off so I tightened up the…
Wall wart for a T Rex 3 smart watch Used: -Old iPhone charging brick (5W) -Short Usb to USB C cable -Amazefit charging puck
An alignment jig to align the linear rails on the delta flyer refit if you install the corner panels first.
PipeFitting 40-49 (G1 1/2) female. Accessories : 2 x M3x16mm SHCS 2 x M3 lock nut
I modified the original mount created by NoobEnginer on Thingiverse to fit the 1.2 version of the BTT HDMI5 screen, as well as changed the base to shorten it and remove the arm and swivel feature. I also modfied Kanrog's modular top by…
An upgrade of the original space plane, for when your space furries want to use a good refit. Scaled for American Mecha games. Category: Toy & Game Accessories
1 solid top inner panel that has mounts for the mellow fly 5dp and pi zero w2 from the original delta flyer.
A remix of the carriage to fit MGN9H rails
A simple under Desk holder for the charger of the Helio strap
I have done this for all of my smart watches in the past and now for the Amazefit Trex Pro. A Wall Wart for holding the watch while charging. You will need: US iPhone 5w Charger Amazefit T Rex Pro Charger 3D Printer Installation: Run the…
When the Samsung ice maker gets jammed/stuck with ice, the OEM design breaks when you try to remove the all in one piece door/bucket/dispenser assembly. Got tired of this and simplified the design. The door and bucket are separate pieces.…
I modified the original carriage with M3 hex nuts instead of heatset inserts for attaching the arms to the carriage, which I find to be more convenient and expect to be equally strong. The centers of the screw holes are in the same…
Streamlines, elites and other such darts fall out of the tommy 20 due to the larger buzz bee dart thickness. This design reduces the size of the holes slightly to grip onto the darts. This will need to be glued in, as there is not enough…
I loved lower decks, this is my take on what a refit would look like for the Claifornia Class.
The knob of the Nefit Moduline 30 thermostat was broken, so I created a new knob.
This is a custom model that a friend of mine made. if you like the model and want something similer you can reach out to him @ https://www.facebook.com/frank.e.ivens.jr or to me @ https://www.facebook.com/profile.php?id=61557727931070 and…
I had a "Time Machine" rolling ball clock for many years however the PCB board had too many issues and I didn't want to purchase a new clock. I bought a 1rpm clock motor and designed and 3D printed a bracket to hold the motor onto the…
a prototype for a project of a simple 3d printed practice french horn kit which will be a simple less than 200 g print in which vinyl piping is fitting a 3d printed chunk valve and key mechanism in which just piping is fitted and strapped…
An open-source frame-fit hook generator for openGrid . This model attaches directly to the frame of an openGrid board, so it does not need a separate snap or openConnect connector. The default settings generate a compact hook for holding…
Make sure your printer is well calibrated and be a little gentle when pressing in the amazefit core for the first time. Needs a 22mm elastic band. You can pick either of the buckles. Printed in PETG with supports for the rounded overhangs.
Since I remixed and re-skinned the Valkyrie, why not add a spoiler and change the gun configuration on the landing bays? Not lying, I dig the look. Canon or not (Wiki says it is) it is a design I am very fond of. I have not test printed,…
These files are intended for use with the TOMY TMP Refit Enterprise diecast collectible. They are non-permanent additions that can be removed or replaced as needed, at any time. As such these additions are non-invasive and do not…
