318 models
When I was in university studying engineering, I carried 3 different templates as one didn't have everything I needed. I made this template to combine my most used shapes into one easy to carry template. Feel free to remix this to better…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
A benchy helper to give you the major measurements your benchy's should have when printed I have split the original bency up and attached it to a plate so it can be hung on a wall. The plate has the major benchy measurements on it so you…
Print approx. €5.88–€7.19 excl. taxPreliminary estimate for one variant
This model is designed to replace the speaker grill on the KOII portable sampler manufactured by Teenage Engineering. I am particularly fond of the orange accents on the machine and sought to replicate them. I printed this component using…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Wanted to hang my OB4 on the wall
Print approx. €5.63–€6.88 excl. taxPreliminary estimate for PETGSource material: PET
Budova stavební fakulty ČVUT z 3D modelu Prahy https://app.iprpraha.cz/apl/app/model3d/
Print approx. €4.77–€5.82 excl. taxPreliminary estimate for one variant
Print Instructions: Quality: Ultra-detail Nozzle Size: 0.4
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Warning These files has many parts and take time to load and slice. I have attempted to make it as easy as possible to lay out and print. Options No slider guide Inner slider guide Outer slider guide The engineering squire guide positions…
I edited the final release of the Stealthburner to fit the Mosquito Hotejd from my Afterburner. The Assembly and the Heatset inserts are exactly the same as for other Hotends. Edit 30.04.2023: After doing Input Shaping and making…
hi there! This is a case i designed for my own use for my pocket operator but figured others might have a good time using it too! Requires: 2x M3x4x5 brass heated inserts - link 2x M3x5mm bolts - link Print settings: I used a 0.2mm nozzle…
This is a simple electrical engineering schematic symbol drawing template. I've included both the .STL & DXF for 3D Printing or Laser Cutting. Print with 2-3 shells maximum. Remix Culture Approved! - To aid in remixes from the community I…
A stand to raise the Teenage Engineering KO II sampler to a more comfortable 10°-20° incline. Slotted pegs insert into pre-existing holes in the KO II for a snug, removable press-fit (depending on your printer tolerance). There are three…
This is a printable replacement of the volume knob for the Teenage Engineering OP-Z. Print material: PLA, PETG, ABS Print several at once to improve cooling and reduce the layer time per part. Remove the old volume knob. For reassembly…
Degreeless_Engineering 6x9 speaker can! Fits most 6x9 speakers! Since these will most likely end up in the heat, fiber filled filament is strongly recommended. I used Eryone CF-PETG . You will also need to supply M5 and M6 heat set…
F Mag 556 for Frog Engineering GBBR airsoft rifles, all parts in one zip. For details, see the link: https://youtu.be/sr5B5eIJpEU
PLA or other filament, 200°,nozzle .40, 60mm/s, 4 top/bottom layers, 5-10% infill.
"Have you tried poking it with a stick?" They ask. "No, I have not tried poking it with a stick" I reply. Not for the lack of thought for doing so, but because I simply do not have a suitable stick. That is of course until now! The…
Cape Breton University course Engineering Graphics and Design 1 (ENGI 1165) Follow the instructions (assign prusa slicer steps.pdf) provided under files (also linked here ). Only print your assigned model number. When printing make sure…
This is a stencil that we designed for our first year engineering students for when they're hand-drawing their flowcharts. All islands are clearly labeled with a high contrast color and the 3mf file that's included has the code for a…
A small and very handy engineering ruler. Features: Circles in 10mm, 15mm and 20mm diameter Radius of 15mm (half circle) and 20mm (quarter circle) Straight edge of 50mm (without markings) The dimension of the features are designed with…
A tool to be used for precise measurments, and as a contextual scale for important projects. This is a exact scan of a real Cavendish Banana with centemeter-acurate scale markings gently installed along it's length. This banana was…
Howard is the gang's worm engineer. Always looking for solutions to problems! Or problems to solutions, you decide.. The Gang of Worms is a series of toys for boys and girls, quick and easy to print, suitable for gifts and to brighten up…
Having backed the Slice engineering Copperhead on Kickstarter I found myself in need of a silicone sock for the hotend. As Slice do not sell socks I decided to cast my own using the ever awesome @CNC_Kitchen's video as a guide. The mold…
To properly benchmark how well you can print engineering models, I prepared Engineering torture pieces . These models are bricks with metric holes and metric threaded holes. All holes are present in vertical, 45°, and horizontal…
This model is 45-45 degree set square with a protractor in the middle. The protractor has an arm to draw straight lines at angles and drawing arcs using the ridges. It also has multiple shape stencils including squares, circles, and…
Please refer to AP.Engineering page Shrinkage Calculator for how to use it and the very important spreadsheet. The reason for the re-mix is for some minor issues I had with setting up an imperfect CoreXY (Voron2.4r2) that left behind an…
Cape Breton University course Engineering Graphics and Design 1 (ENGI 1165) Follow the instructions (assign prusa slicer steps.pdf) provided under files (also linked here ). Only print your assigned model number. When printing make sure…
This is a clip I designed to hold pens to my engineering notebook.
A full size hard case/travel case for the teenage engineering op-1 with a replica op-1 layout on the top, includes a side panel to allow access to the headphone and charging ports while in the case and has the option to embed 5mm magnets.…
This is a remix from the Bicycle Bottle Cage / Holder by PretEnGineering. I made a round shape on the backside for fitting a tube of a bicycle frame and added some tunnels vor mounting it with cable ties as an alternative to screws. Print…
Same outer dimensions as the original knobs on the KO II. This knob fits the slider without using unnecessary force. This model is tried with PLA on a Prusa Mini. Printed with 0.2mm layer height, 15% infill, Prusament PLA Galaxy Silver.…
An engineering flowchart. Category: 2D Art
ko II 2 ep 133 teenage engineering Battery Cover in prusa slicer its easy to add text. embossing etc this is a first pass. tolerances could be better. size is slightly off. It fits though. Ill circle back and update slightly at some…
My brother wanted a Mesa/Boogie logo instead of the Marshall logo
Replacement fader knob that fits the full length of the stem and rests on the EP-133. You might have to adjust the X and Y scale a little to get it to fit perfect. I was at 102% in prusaslicer for a perfect fit.
I originally printed these on a Prusa i3Mk3s+ using PET-G at 30, draft mode, with 25% infill (Support cubic). You can try printing at 15 or 20 detail mode, as you like. (It's a pretty big print, so draft works fine imho.) Designed in…
I wanted a cover/protector for the EP-133 so I can throw it in a bag for travel. I grabbed the official bag from TE, but it's a soft bag, so I made a cover to go along with it to protect the fader and knobs from crush damage. My design…
Das ist ein Nachbau vom Hornet250 der von Mimic UG gemacht wurde. Leider gibt es die Hersteller nicht mehr und der Frame wird auch nicht mehr hergestellt, also hab ich einen Nachbau davon angefertigt. Der Frame unterstützt 16x16 bis 32x32…
just a 3D printable model of a meme. Change the colour of your filament at 2mm, or just paint the top.
Thank-you to Ryan @V1Engineering for his incredible support, and of course for allowing the use of these logos! These simple to print models have only three parameters and can be easily scaled, or modified using the original Onshape…
My bike had some old pedals that had huge gaps and were very noisy. I disassembled them, got the shaft out, and redesigned from scratch the whole body of the pedals. I used one extra 608 bearing at the outer part for more support and…
Stand is 2 models, 5 prints. It utilizes m4 hardware. So you will need M4x6mm flat head screws and I used M4 heat inserts 6mm diameter and 4mm long. You can add rubber bumpers as needed but it has been working fine for me without any.
A small redesign of the engineering meme. Saw the design on the internet, but there you had to pay for the .dxf files, so I thought that I should create my own version for free. You only need 4 some small srews for the wall if you want to…
This project is a reverse-engineered version of the XXXFPV Bone Frame, designed for those who can't find the original anymore. It includes multiple versions of the frame to suit different needs and manufacturing methods, as well as…
I love my TE OP-Z so much but accessory for it is currently limited. So I made this model in hope it could help people easily make more accessory for it.
This is a hard case for the Teenage Engineering Pocket operator series. Needed something to protect the synth while traveling (this case have been tested in rough conditions(i.e. my wife's handbag)). At the same time I prefer playing on…
Brand new model of magazine for Frog Engineering Hi-Capa (TM system) HPA converted GBB pistols!!! Details can be found here: https://youtu.be/4JXC142Xr2Y
Miniature template for drawing engineering diagram
Made in tinkercad, no supports needed, drafting/low quality speed print. About 6" by 3". I included some rough 1" side markings as a makeshift ruler aswell.
A couple of Gridfinity modules to hold rulers. Specifically, both normal rulers and 3-sided architectural/engineering rulers. The 1x1 holds one 3-sided and one normal ruler. The 1x2 hold two of each. Both are 3 units tall. I recommend…
This is made to go with the LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1) . Here's a helpful video I made about this: OTHER COMPATIBLE TOOL HOLDERS INCLUDE: NEW…
The EUROTEN is a mounting frames to mount Teenage Engineerings’ Pocket Operators™ into the Eurorack. No screws Only the frame need to be screwed into the Eurorack. There are no screws required to mount the Operators into the frame. They…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jN2hGgAXl5P Category: Keychains
A fun, little business card holder I made to echo the sweet, authoritative voice in my head reminding me to take my time and measure before rushing ahead. Of course, it could also just be a little dopamine decor to make me smile, because…
Having bought this case I was immediately disappointed by the lack of core functionality. This case in its stock configuration is an oven for your computer components, the GPU is starved for air, as is the CPU. So I designed these…
A flat replacement base plate for a Mission Engineering expression pedal. You can use the factory screws, as I've made insets and the plate thick enough to allow them to be used. There are 3 files, for 2 different prints: If you have a…
Replacement knob for the teenage engineering OP-1 daw. Should also be compatible with the MK4 if you want to slap an OP-1 style knob on there. Print with organic supports and also ensure that the perimeter generator is set to Arachne…
StarTrek Discovery Engineering badge Use a 2 by 10 mm diameter magnet on the back and clip it with another under shirt
This is a remix of the excellent model from Salvation76.......added 19mm to the length.
Avoid the tragedy! I love the minimalist design of pocket operator, but found the hard way that LCD can easily crack without protection (see the leftmost PO-28 Robot). I've modified @ProteanProjects and @Randy1177 great friction-fit…
A very small, neat case for the love of your life, your Teenage Engineering OP-Z. Sliding removable lid, with spaces for optional magnets. Prints in PLA - no flexibility required. I wanted something that barely increased the OP-Z size at…
Summary Section: My second project for my intro to engineering class was a 3D model of a black Jordan logo with a little black Nike logo in the lower middle of it that has the number 23 in red which is in the bottom of the logo and it is…
Ein Gehäuse für den Teenage Engineering Pocket Operator im klassischen vintage Synthesizer design. Hinweis : Für das Einsetzen der Pocket Operator in das Gehäuse, muss der PO Hanger restlos entfernt werden. Rückstände müssen evtl.…
A 3D model based on the modular handheld device seen in Star Trek: The Next Generation (notably used by Dr. Pulaski in "Unnatural Selection"). Separate parts for easy color match. Perfect for cosplay, display, or as part of a TNG…
ko II 2 ep 133 teenage engineering technic Stand Simple stand for the 133. these are 240mm long. this is very large for a 3d printer. my printer tops out at 180mm so dimensional accuracy is hard to verify. Technic pins are difficult to…
I printed with a brim, which connected the buttons. I snipped off the edges of the brim to fit the case and insert the buttons like that
Noise engineering is one of my favorite companies in the Eurorack space - and now that I have a versio module, I wanted to be able to quickly use the various flashable modes without having to refer back to a manual/screenshot all the…
An engineering flowchart. Category: 2D Art
Stand for the Teenage Engineering “OP” line of synths. Works on a desk or in your lap, and is designed for use with: OP-1 OP-1 Field OP-XY (retains access to the pitch bend controller) The minimum angle is 20º and supports larger angles…
I made this minimalist cover to protect flimsy power switch of the OP-Z. Note: use thin paper tape inside the cover to provide more friction and protect the OP-Z from scratch.
This drawing ruler or stencil allows you to draw an equalization curve through your points very easily. In addition, it features different mathematics symbol and cos(x), sen(x) and tan(x) functions graphics . Very easy and fast to print.
Just a small modification.
I design this 36mm and 33mm key for multiple use. For example to change car oil filters. I printed both with BLL X1C 6 walls , 25% infill and Overture PETG black dried for 15h. It's strong enough! You can use 100% as well and set higher…
3mm, 5mm, 8mm, and 10mm Speaker Baffles for the CRude Engineering 15x11mm Sugar Cube Speakers Speaker for sale on https://crudeeng.com/products/256019636071 Use code PRINTABLES for 25% off your speaker order!
Alien - Engineering Technician Samuel Elias Brett - 1979
Inspired by Jan Štech and their Template For Electrical Diagrams , I have made a similar design to print for creating consistent Free Body Diagrams, as well as consistent Beams for strengths. Designed to be printed at a .2mm layer height.…
Ok so for this i got the inside to glow with a different part not included, but you can just make any sort of shape and make it self-illuminating. link to original on grabcad:…
F Mag 762 for Frog Engineering GBBR airsoft rifles, all parts in one zip. For details, see the link: https://youtu.be/sF2R1qeTrEg
small and rounded fader knob I quickly drew up for my new calculator. I printed it with a Bambu lab A1 with the 0.2mm nozzle with 0.1mm layers and 3 perimeters, 15% infill. less probably feasible. fits perfectly without any post…
Replacement bridge pier footings, modelled to resemble those supplied with N-Scale Micro Engineering Trestle piers. I've printed them on both filament and resin printers with good results. Category: Buildings & Structures
1/100 MAJ-V34 Jiachong engineering type gundam 00 is an update to the 1/144 ver a bit scaled up and changed the clearances to be 0.2mm. WIP as I have not tested it yet. Category: Vehicles
KO II Shelf - Teenage Engineering EP-133 Show off your beautiful KO II on this secure, wall mounted shelf. Prints without support in the provided orientation. Slot locks the KO II in position so it wont slip out. Attach to any surface…
Suchst du nach einem stilvollen und robusten Gehäuse für deinen Teenage Engineering Pocket Operator? Dann ist unser MONOLITH SLIM genau das Richtige für dich! Dieses hochwertige, 3D-gedruckte Gehäuse aus PETG sieht nicht nur gut aus,…
Here is the file which you can print and use to make a NPAS valve for VFC GBBRs that dont feature muzzle energy setting. More details are in the video: https://youtu.be/JR75Rqwzj30
Annex Engineering K3 Sidepack Waveshare 7.9" DSI Mount
A replacement keycap for the teenage engineering EP-133 and EP-1320 sampler.
A straightforward drawing stencil I made while I was a marine engineering cadet. Part of a cadet's sea phase involves drawing the many systems found onboard a ship. These systems contain valves, pumps, regulators, filters, gauges, and…
Remix of Nozzle Torque Wrench & Bit Holder Gridfinity by crealitycheck. Lowered bin height and added nozzle holder(s).
For details, see the link: https://youtu.be/... to be linked when
Mount system for the Gilbert Engineering Rosa Grande. Uses 1/2" EMT with holes to use a self tapping screw into the EMT. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament:…
'H' in Engineering stands for happiness
See video below to understand how to assemble the parts to your VFC HK417 GBBR to improve hop up performance and increase range!!! All parts printed with simple materials, have to be stiff and strong - PLA is good choice. Do 3 outlines,…
Simple cheeks for the 133. Nice to add a splash of color to this sampler. these are 240mm long. this is very large for a 3d printer. my printer tops out at 180mm so dimensional accuracy is hard to verify. Technic pins are difficult to…
I would have done anything for a template like this in school. To measure, mark the spacings and then neatly draw the hatching took such a long time. This template will save valuable time and ensuring consistency and precision in your…
This is an example of buttons and D-pad using some DS conductive rubber pads. This design is meant to be used in others projects. I was working on a new handheld video game project, and to keep the thickness as small as possible I have…
SUPPORT MY WORK - DONATE 👉 https://wise.com/pay/me/victormarquesm1
About half the height of the model this is remixed from
for design reference update250902 small changes for cable release
Take this if you don't want to break your original placeholder module
A simple design that I made in a while of my time. My idea is to make a more complete rule to help me with the diagrams that I have to make in the subject. I hope it can serve you as well as it did me.
Gear Fidget Toy A simple but satisfying gear mechanism that keeps moving in a loop. Swap the red and blue gears and see the difference in closed-loop behavior. A colorful gear-based fidget toy with interlocking gears arranged in a…
