FERREX Battery Holder
Printed with PETG. .20mm layer hight and support.
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 380
- Likes
- 16
- Rating
- 0
59 models
Printed with PETG. .20mm layer hight and support.
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for PETGSource material: PET
Support mural pour batterie Ferrex Activ Energy (Aldi) Battery Holder Ferrex
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
A Drill Bit Holder for the ALDI Ferrex Pro power drill
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for one variant
This is a print in place storage case for the Ferrex 4v Mini Engraver from Aldi. I’ve also included space to store a small selection of the engraving bits and the included USBC charging cable. The case holds shut using a pair of 5mm dia x…
Print approx. €10.89–€13.31 excl. taxPreliminary estimate for PETGSource material: PET
My Main tools are Dewalt for which I am deep into the battery platform. Note: There are 2 versions of the Ferrex platform. examine the pictures to check if this matches. As a diyer, I can't justify buying all professional tools: some are…
All parts were printed with PETG with a resolution of 0.28mm and with supports. In addition to the printed parts, you will need 4 screws identical to those in the photo plus 3 BX2091C terminals…
This modified version of my first Aldi/Ferrex battery adapter can be mounted to a surface and uses easily available car connectors (6.35 x 0.8 mm male) as contact blades. I've printed it with 0.25 mm layer height, 0.65mm extrusion, two…
All parts were printed with PETG with a resolution of 0.28mm and with supports. In addition to the printed parts, you will need 4 screws identical to those in the photo plus 3 BX2091C terminals…
Update 2024: Since it is impossible for me to control the printers, filaments and slicer settings of those who print my models and having been told that my model is not sturdy enough to withstand drops (it was not designed for that…
Thank you MiGarro! Parkside X20V battery to Ferrex/Workzone Titanium tools (LY770XS-Li-20V-F battery) assembly info (original project): https://www.printables.com/model/329087-parkside-x20v-team-battery-in-ferrex-tool-battery-
Try to make it from a strong filament, 4+ perimeter and 50%+ infill! I made it from PETG @ 230C, part fan turned off to get better layer adhesion. The blade is flat, not simmetric for better bed adhesion.
Dieser Adapter ermöglicht die Nutzung von 20V-Ferrex-Tools mit Einhell-Power-X-Change Akkus. Wer schon Einhell-Akkus und Ladegerät hat, und ein preisgünstiges Ferrex-20V-Akku-Tool von Aldi gelegentlich nutzen möchte ohne sich Ferrex-Akkus…
After three years of daily use, the original wheels regularly began gunking up, slipping and made the robot stuck, waiting for help… …I measured the original ones and made replacement ones: wider and with spikes! Idea is to reduce grass…
Fixed adapter from Makita batteries to Ferrex tools. The shape is specifically designed for hand 5W LED light. Contacts for battery are from aliexpres. The tolerances are low, so the contact block fits snug in the place. Between minus (-)…
Printed in 0.2mm in PETG The assembly is pretty self explanatory and everything is held together with 8 screws. The holes are threaded for M3 screws but fill free to use wood screws as well. This requires 3mm screw with flat heads - you…
This is an adapter to allow a 20v Aldi 'Activ Energy' to connect to other power tools. I have made the battery connector part which can be screwed (with the original screws from the original battery in my case) The adapters v1 and v2…
Ferrex Spulendeckel für Aldi Rasentrimmer, gedruckt aus ASA. Defektes Teil vermessen, in Rhino 6 nachgebaut. Gedruckt auf Anycubic Mega X mit Colorfabb ASA 250°, 90° Bett Nacharbeit erforderlich: Die beiden hervorstehenden Rastnasen oben…
Unlock Versatile Power: ALDI ActivEnergy / Ferrex Battery to Wiring Harness Adapter Harness the potential of your ALDI ActivEnergy or Ferrex 20V power tool batteries with this robust adapter. Designed as a 3D-printed solution, this…
Discounter branded products are significantly cheaper and often just as good as the original - however, the supply of consumables can be a problem. I have printed these trimmer blades for the Ferrex lawn trimmer (nor sure if bought from…
This is a battery cover for the Activ Energy 20/40V batteries that are sold in Aldi for some Ferrex tools. It's a snug fit but protects the terminals when not in use. Print Settings Printer: CR 10 Rafts: No Supports: No Resolution: 0.2…
This is a remix of the FERREX Activ Energy (Aldi) battery holder for the Honeycomb Wall. Printed with supports touching buildplate for the two hexagon inserts.
Easy to print model of a generic wall mount for Ferrex / ActiveEnergy / Aldi Tools.
This is a little battery rack I designed for Ferrex/Aldi powertool batteries. It will probably fit many other manufacturer's batteries of the 5s/20V variety, the internal dimensions are 48mm height, 80mm width, 98mm depth. If your…
Just a little drillbits holder (for hex bits) for the side of Aldi / Ferrex drills. Printed in both pla (grey one in my pictures, very tight grip) and tpu/flexible filament (black one in the pictures). The distance between 2 opposite side…
Title says it all. Needed a hose adapter to connect Bosch POF 1400 router to Workzone/Ferrex ash vacuum cleaner.
Printed at 0.2mm layer, 3 walls (like al multiboard parts), 15% infill (PETG). original design is from: https://www.printables.com/@tlisek_2060345
I love the Gloomhaven organizer by TowerRex but it doesn't come with nearly enough dividers for all the cards. E.g., I like to put dividers between the monster ability cards to keep the monster types separate. Print instructions…
This cradle holds the Ferrex M7 multitool, a small dremel clone sold by ALDI in Germany. You can extract it from it's holder by either grabbing the tool from the middle, or, if that is easier for you, by pushing down on the spindle in…
simple vacuum adapter, inspired by Ryobi to makita table saw variant. (https://www.printables.com/model/76720-makita-table-saw-to-ryobi-vacuum-adapter)
Wandhalterung für Aldi/Ferrex Handstaubsauger. Ich drucke ihn mit den Auslegern auf dem Druckbett liegend (mit Support) um die Schichten möglichst in der Richtugn der einwirkenden Kraft zu belasten.
Use a Ferrex tool with a Dewalt Battery with this DIY adapter
Remix and re-upload of a shelving system top cap designed by ‘aim’ on Thingiverse. We wanted to secure our G3 shelving system to our wall to ensure that it cannot fall over, to achieve that we've built a remixed variant that has an…
Gridfinity first order retrievable holder for the Aldi Ferrex Rotary Tool. Stores everything that comes in the original flimsy box. Best to print in 2 Parts and glue or cold-weld together (see the pre-cut Version) unless you have a…
Shelf Brackets for Errex shelves. No tools needed. Fits laterally into the Errex perforations. Bracket A: for a wooden shelf Bracket B: spool holder with two ø10 mm aluminium profiles The tenons can further be reinforced with ø3 mm wood…
Ein Halter für ein Ferrex Akku Bohrschrauber. Aus PLA gedruckt.
These pumps were for the Ferrex Activenergy Battery System and sold by aldi at some point, they sometimes are sold on ebay but often without adapters. I decided to design an adapter for these from scratch because the ones for similar…
A simple hook that clips firmly to the vertical rail of an ERREX shelf system. https://www.thingiverse.com/thing:4651458 Print instructions Printed with Prusament PETG. Prusa I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25%
Just made some changes to fit my drill.
A Gridifinity solution for the Ferrex USB-C glue gun sold by Aldi. I've uploaded the holder and gridfinity base as two separate files, which you can print separately without any supports and then glue together. There's also a combined…
There are a lot of great Ferrex tool battery adapters here and elsewhere, but they almost all seem to be for the “Activ-Energy” type batteries, which different than the battery and tool which I have. I'm not sure if it's a difference…
Easy to print headphone stand or hook. It snaps into the shelf's sheet metal approx. 30mm. No tools and no glue or sticker required. Printing: PLA or PETG 0.3 mm layer height assemble with some CA glue https://myregal.ch…
Small profile battery holder for Honeycomb Storage Wall. Single hex plug for smaller 2.0Ah battery and dual hex plug for larger batteries with more weight. FreeCAD and Step files included.
Broke the two clips on my ferrex cordless driver case, so designed a simplier one to replace them. (may fit others) hope it helps !! Category: 3D Printing
Print Upright. Consider Using a Brim. Hex Part has 13.45mm "key width". Remix from here:…
Ersatzteil für den Ferrex Laubsauger, Adapter Beutelhalter.
used https://gridfinitygenerator.com to create box from my original 3d model
This is a box for storing two sets of Ferrex (Aldi) drill bits, one set of step drill bits and one set of multi-function drill bits. It is based on the rugged box by Whity.(…
These pumps were for the Ferrex Activenergy Battery System and sold by aldi at some point, they sometimes are sold on ebay but often without adapters. Created another adapter to attach these generic threaded pump adapters meant for Car…
Print without support or adhesion! Both already designed withing CAD! I used a 0.4 mm nozzle and 0.2 mm layer height. Printed in PLA and ABS. Fits snugly. Update 28.08.2026 - added a model with 5x contact prongs for newer battery versions…
In 100% ausdrucken, ca 10-20% infill, aufstecken, fertig. Sollte relativ eng sitzen. Ansonsten etwas Klebeband um die Originalräder wickeln um deren Durchmesser breiter zu machen, damit es fest sitzt. Die Räder sind nicht komplett rund,…
This is a fuel tank cap for some Ferrex lawnmowers. It comes with a one way valve to allow air to get inside the tank while preventing fuel from spilling out when the lawnmower is flipped for cleaning. The main body should be printed from…
Remixed to fit the Ferrex 1.3Ah 12V batteries found on the cordless ratchet and multi-tool. Print Settings used on Bambu P1S: Material: PETG Walls: 6 loops Infill: 25% Gyroid Supports: Tree (Auto) enabled
I wanted to store my filament more visibly, so I came up with these shelf brackets. They slot into the uprights of an Errex shelf and require two 10mm diameter rods of some kind between them. In my 50cm deep shelf I can fit 7-8 spools per…
Keeps the moving mechanism clean and prevents the greasy surface contaminating things
I wanted to attach the new small rotary tool from Ferrex (Aldi brand) to my honeycomb wall. It is a minimalistic desing but the tool sits quite stable in there. You can tell, there is a design flaw with the smalest ring on the bottom. It…
fits (electric) pumps with Outer Diameter of: 35mm printing suggestions prefer softer material like PETG print with high perimeter/wall-strength count prefer wider nozzle your suggestions are welcome still looking for ways to improve the…
This is a re-enforced battery shroud for the Ferrex 40V Cordless Chainsaw. FOR FERREX BATTERY! When assembling pay attention so everything slides in place, its a snug fit you you will need to use a bit of force, but not too much.