39 models
You have to print two pieces and glue them to the existing middle part. Thanks to this, the distance between the legs increases to 23cm.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
@med145 's wonderful bracket adapter ( https://www.thingiverse.com/thing:2238848 - The attribution field was broken at the time of upload), but, includes the standoffs so that the STOCK backplane + screws can be used, without any sort of…
v2.2 - Cleaned up low poly look, some minor aesthetic changes Changed some things from the original model (actually remodeled it to make it cleaner and fit more snug). Two contact points for fitting as my latch area broke. The hinge part…
This is my first model, which is a remix of the mount from Fevvahz for the Ring Doorbell Pro 2. I had a skybell, which i replaced with a Ring Doorbell Pro 2, the skybell existing mounting holes were much wider than the ring doorbell, so i…
A linear rail upgrade for the ender 3 that was designed to require as little aditional hardware as possible. There's no drilling, cutting or modifyning of the stock parts and all of the metal plates and brackets are still used. As well as…
Simple remix of the duct by @Richard_215647. I wanted to re-use the existing plastic spacer that comes with the stock CR-6 SE fan. So I closed the gap in Richard's design (because I don't want air to come out there any more). If you…
Replacement clips for a hand rail of a steel wall swimming pool. There are two variations: The original one recreated (the blue one in the pictures). One with a little hook to hold for example a thermomenter. Instructions I printed it in…
Looks like there's many different revisions of the C64 breadbin rear snaps/hinges. I wanted a version of banman's design that fit between the vertical supports of my machine, as I'd prefer to limit grinding and modifications to the case.…
Remixed version of the Swiffer Wand to attach to a standard Swiffer handle. My dog chewed the Swiffer wand, but the handle was still good. So I only needed a new wand. I liked the design of this model so I remixed it to attach to my…
I've remixed @eaglesemnt_1407405 design for a SKÅDIS T-Nut Makita Charger mount. (Tested on my DC18SD model) WARNING: if you over-tighten the charger screws, the posts will snap I thought I had the right length, but must be a fraction…
After some brainstorming and wanted a alternative for a bulkhead i came up with this diy bulkhead this should be as efficient as a normal bulkhead though using existing pvc couplers since bulkheads are not available where i live this…
The focus of my design was to use the existing insert and improve it for better functionality and comfort with the lowest possible filament consumption. Now all components which are used during the game can be placed with there trays on…
For more info about this automatic pressure advance calibration project please visit: Projects GitHub repository: https://github.com/undingen/PressureAdvanceCamera The camera is held in place by friction.
This is a set of organizers for the Vantage board game, generated using Rainers' ever-useful box generator OpenSCAD file. The "half height" and "full height" organizers are intended to be used with the original green component boxes, as…
Hello, First i am Thanks to all. My anet a8 pinter now back to business. The direct drive system on anet a8 has broken 2 months back it stops working from there. I tried a lot to fix it But could not. Hence i decided to change to E3D…
We have an old bathroom in our house and the sliding glass shower doors needed to be removed, however the rail support system was intact and we did not wish to remove it. Until we figure out what to do overall we wanted to hang a shower…
This is a simple BLTouch Bracket for existing carriages that use 2 x M3 Screws into threads in the carriage itself. Its got plenty of vertical play to adjust the BL Touch so that the sensor is 8mm above the nozzle when its on the print…
This attachment for the Festool OF 1010 EBQ-Plus router helps keep the router aligned, when deepening an existing track, eg. the one in the wooden deck on a sailboat, where rubber is normally applied. When refurbishing a deck, you might…
Customized version of http://www.thingiverse.com/thing:47956 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=47956 Instructions Using the following options: plate_size = 1 5th_plate = none 3rd_plate = none…
@Ervin : Thanks for your nice toy hammer model! I remixed it slightly, both to make it easier to print (flattened the rounded bottom of the business end) and adjusted the opening to fit an existing handle for a toy hammer our grandson had…
This low-profile wall mount is designed for the Tuya TS0044 smart 4-button scene switch (e.g. Zigbee models by Zemismart, Moes, etc.). It allows you to mount the button directly over a standard European wall switch without modifying the…
A redesign inspired by the Coffee Knockbox by Dominik (https://www.printables.com/model/61064-coffee-knockbox). Main change is that no bar is included, because I already had a 10mm diameter metal bar from a previous knockbox.
Update April 2026: I've updated the printable cup holder (use if you do not have the part from the wooden ikea lanespelar one). Now includes cutout for a mug handle, which also makes it easier to screw into the hook bracket.…
This is a closed-back version of the Insteon Mini Remote Mount Bracket. The commercial part can't be used over an existing box. This one can. Check out my other Insteon things: If you need the original style Mini Remote mount check out my…
I've had the pocket doors by @Drakka01 on my enclosure for a while now, but I wanted to change out to folding doors. I didn't want to reprint the enclosure parts, so I had to remix the hinges a bit to work with the existing pocket door…
Quartet glass board marker holder I needed a marker holder that kept them upright (so the ink stayed at the tip). This is compatible with the existing magnet accessories for the quartet board. If needed, I've added the design for the…
I wanted to do as little modification as possible to the printer just to make life easier. This remix removes the exhaust functionality of the printer and repurposed the exhaust fan to recirculate the chamber air and filter with activated…
Hardware needed: One M3x30 Screw Six (you could also get away with four but it wouldn't be quite as sturdy) 8mmx2mm magnets Two M5x30 Screws Two M5 Hex Nuts Printed upright with supports, 5 walls and 30% gyroid infill.
mine printed without supports….
In search for not having someone to turn of the power to my Tradfri bulbs, I designed a little cover. This cover contains a washer disk that you can stuck a Tradfri Switch on. This cover works for a existing switch with 56mm high switch…
Activated-Carbon Add-On for “One Uppåtvind, please!” (works with TOM / @Madewithlayers’ original filter as well as @Rolf_991381's horizontal version ) Slip-on upgrade that lets your Uppåtvind HEPA hood take a second line of defense: an…
Ich habe eine Blende erstellt welche zu dieser Halterung passt: https://www.printables.com/model/890337-official-nanoleaf-hexagon-flexible-mounting-connec Ohne diese Halterung kann die Blende nicht verwendet werden! Es sind verschiedene…
Mount your Pixel 9 Pro Fold with a standard camera screw (Most consumer cameras are fitted with 1/4-20 UNC threads). I have made a new thread in the “holder” to be able to use a M6 metric screw for mounting the the brace to the holder.…
While I strongly preferred “direct multiboard screw” mounting for Underware components, I really didn't like dealing with the flat bolts and corresponding finger tool that were included with those components. Here is a similar tool to the…
My Door is a bit special and so I couldn't get any plate securely mounted. I slapped this plate together, which screws directly onto my door. I had to remove a plate around my cylinder and this plate fits perfectly instead.
To hang the mirror a bit higher, the new mounting point is raised above the existing fixture. To keep the adapter stable and wobble-free, it features a downward extension. This extension supports the adapter against the wall, securely…
This is a remix of the AD5M enclosure lid holder by @Geej_1294502 ( https://www.printables.com/model/890592-flashforge-adventurer-5m-ad5m-enclosure-lid-holder ) which enables you to reuse the existing M3×6mm bolts that secure the original…
The focus of my design was to use the existing insert and improve it for better functionality and comfort with the lowest possible filament consumption. Now all components which are used during the game can be placed with there trays on…
I wanted to do as little modification as possible to the printer just to make life easier. This remix removes the exhaust functionality of the printer and repurposed the exhaust fan to recirculate the chamber air and filter with activated…
