BetaFPV Pavo Pico / Pavo20 / Femto GPS mount BZ121 gps holder
Uchwyt GPS BetaFPV Pavo Pico / Pavo20 / Femto BZ121
- Downloads
- 175
- Likes
- 9
- Rating
- 0
28 models
Uchwyt GPS BetaFPV Pavo Pico / Pavo20 / Femto BZ121
The Pavo Pico, Pavo20 and Femto from BetaFPV use the same VTX hole spacing so they are compatible. Not compatible with the Pavo20 Pro that is larger. The mount is around 2.8gr (depending on your print settings). The stock version (plastic…
Simplified BetaFPV Pavo Pico mount for O4 Air Unit (Lite) without carbon cross
BetaFPV Pavo Femto Storage Box – Remix of SnapLock Storage Boxes This is a remix of the SnapLock Storage Boxes (parametric) by Hugo, designed specifically to store the BetaFPV Pavo Femto drone along with four 450mAh Lava batteries . It…
While I made this model completely from scratch, credit where credit is due. I got the inspiration from this particular model: https://www.printables.com/model/1231690-betafpv-pavo-femto-storage-femto The previous one was sized for 450mAh…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Fossil Grey Transmission Distance: 0.3 PLA PolyTerra Cotton White…
This is my attempt at a very small case for the Femtofox Meshtastic node. More information on the Femtofox can be found here: https://github.com/femtofox/femtofox Some notes: Additional Components: N Female to IPX/UFL RG178 Cable - 10 cm…
This is a remixed and customized version of the original Rugged Box (Parametric) , modified specifically to fit and protect the BetaFPV Pavo Femto drone. The foam for the top cover was reused from the original packaging the drone was…
Batteriefach / Gehäuse / DJI Lite Gehäusehalterung
As the title says, a canopy/mount for the VTX/camera for a Emax Wyvernlink 100mw OpenIPC system for BFPV frames. Print at .16 optimal with at least 2 walls 3 top 3 bottom and 15% infill. with some pressure screws with thread in. I used…
As the fifth and last member of the God Hand, Griffith's name, Femto, symbolizes his demonic rebirth during the eclipse. "Femto" represents a metamorphosis into a transcendent, yet malevolent, being; he becomes an emotionless, pure evil…
Omnium Cargo Rear Light for Lezyne Femto Passt genau in der Omnium Rail Passend für Lezyne Femto
Mount for GPS module nano and Buzzer jhe42b-s. Pavo Femto\pico
3D-Printable Wall Mount for BetaFPV Pavo Femto Designed for easy installation, the mount includes pre-drilled holes (3mm) for screws or adhesive mounting. Print Settings Rafts: No Supports: No Resolution: 0,2mm Infill: 2-3 walls 100%…
Note: You'll have to cut out part of the side protection to get SD cards in and out and to reach buttons. should be easy and it makes the design flexible to multiple different configurations while still protecting all the way around.…
Case for Pavo Femto with 4x 450mah BetaFPV Lava batteries without gap between the bottom and the top parts.
I hope it's useful to someone. This is my first 3D project created entirely from scratch.
After reading a great tip by 8Bit_koopa in the Flitetest Forums http://forum.flitetest.com/showthread.php?33056-Flitetest-DIY-Gremlins&p=351391&viewfull=1#post351391 I decided to modify my original Femto F3 Camera Mount to add the sweet…
Stand to display your Pavo Femto drone while you're not flying it. Prints as two pieces with no supports needed. Press fits into the bottom of the drone frame (can't have a battery in). This stand is designed specifically for this drone,…
The default Lezyne Femto screw cap did not work well with the integrated handlebar of my new bike so I redesigned it to mount to a GoPro mount. Now I can attach it to the GoPro mount of my out front computer mount. I even use this cap on…
This is my beta fpv pavo femto battery holder remix. It fits the 680mah Lava 2s batteries. I put some little landing feet on it to help it balance as well. Printed with TPU, print in the orientation it comes in. 3 walls 20% infill. You…
This is a nice, little, thin, lightweight and useful camera and flight controler mount for your FT Gremlin. The camera mount tilts the camera back at 10 degrees. The flight controller sits down nice and flat into it's mounting area with…
This is a TPU sleeve to fit the Orbbec femto bolt. The camera slides front first into a closed ended sleeve. An internal rim creates an air gap between the face and the optics so an impact there transfers load to the housing, not the…
This is my first HueForge print, so it might not be very decent. Filaments I used. Filament 1 - Bambu Matte Black PLA Filament 2 - Anycubic Gray PLA Filament 3 - Panchroma Fossil Gray PLA Filament 4 - Jayo White PLA Settings: Initial…
You will need embedded nuts for assembly.
Guts And Femto Berserk Bookend Hefesto 3D ALL IN 1 and PARTS