9,290 models
Easy to make a cute Cat with Coffee keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
EDIT: updated parametric version It’s also possible to use it without the inner box. The purpose of the inner box is to let coffee pucks dry so mold wouldn’t develop so easy. Buy me a coffee
Print approx. €3.60–€4.41 excl. taxPreliminary estimate for PETGSource material: PET
With these holders, you can neatly store your Dyson accessories. Update: Added STL Files
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for PETGSource material: PET
Accent your coffee corner with these fancy coffee bag clips. These clips will help keep those coffee grounds fresh! Just squeeze the folded bag top until it is relatively thin and effortlessly slide the clip over the fold. See my other…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Easy to make a cute Axolotl having coffee keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
This 3D model is a coffee cup holder that attaches to a stroller, making it a must-have for parents who enjoy a hot drink while on the go. The holder includes several parts that can be 3D printed and assembled with the help of some…
Print approx. €8.44–€10.32 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
NASA Space coffee mug ( capillary cup ) enables drinking in zero gravity. Now we can all drink like astronauts. Also it is fun way of teaching kids about physics and space. If you want to drink from it make sure you treat it to be food…
Print approx. €7.28–€8.90 excl. taxPreliminary estimate for PETGSource material: PET
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
Print approx. €5.14–€6.28 excl. taxPreliminary estimate for one variant
Easy to make a cute Giraffe keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
Easy to make Mother Giraffe and Son keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
August 20, 2024: Re-uploaded the unique MK4 parts as the original upload appear to be corrupt. This Tower Print Buffer has been updated to work with the MK4 and MMU3 system (It still works with the Mk3 and MMU2 as well). The frame mounted…
Print approx. €7.61–€9.30 excl. taxPreliminary estimate for PETGSource material: PET
Meet Mini Coffee Bean Buddy , the tiniest caffeine-fueled friend in the Mini Buddies family! ☕✨ ✅ Adorable & Tiny Design – A fun and quirky desk buddy ✅ Perfect for Desks, Shelves & Collectibles – Small but full of personality ✅…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
It's a story. A few weeks ago we were in Paris and everywhere you could buy expensive models of the Eiffel Tower and some even flashed. So I promised the family that I would print it for them and it would be lit. :) Since I used the add…
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
This is a blind shaker used to de-clump coffee grinds. As shown in the video by Lance Hedrick. The method seems to be working even better than WDT. It's my first version of this Blind Shaker - Printed in PLA however PETG will also work. -…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant
Universal Gun Rack Idea made for any size, length, shape, also editable for any needs. Can be mounted in any way, shape, or size. editable and customizable complete vertical storage racks. Uses 2 normal #6 drywall screws for the bottom…
Print approx. €9.15–€11.19 excl. taxPreliminary estimate for one variant
Cheep Cheep the Puffer Fish from Super Mario Brothers.
Print approx. €10.31–€12.60 excl. taxPreliminary estimate for one variant
After completing the Mini Base Upgrade, I noticed the left side of my X-axis was lower than the right. This print is an attempt to both explain and correct that misalignment. While the Mini has the anti-vibration pads placed directly…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for PETGSource material: PET
This Tour Eiffel MINI-ature (Miniature for the Prusa MINI) :-) …. took me long time and several stops and restarts from frustration. I modeled this miniature starting from a metallic miniature and using pictures of this iconic tower.…
Print approx. €5.32–€6.50 excl. taxPreliminary estimate for one variant
Zvětšený zásobník na kávu pro kávovar Delonghi ECAM. Po instalaci tohoto vylepšení je možné do zásobníku na kávová zrna přidat více než 1 kg kávových zrn. Model je plně kopatibilní s plastovým průhledným krytem dodávaným s kávovarem a…
Print approx. €24.05–€29.39 excl. taxPreliminary estimate for PETGSource material: PET
I´ve been looking for a solution to not have my perfume samples lying around so they don´t leak. The available designs weren´t usable because they mostly use 1 diameter. This stepped design utilizes 16mm/14,3mm/12,3mm/11,9mm diameters for…
Print approx. €13.92–€17.01 excl. taxPreliminary estimate for one variant
This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…
Print approx. €4.88–€5.97 excl. taxPreliminary estimate for PETGSource material: PET
This gauge shows the range of a spell and the area of effect in a cone. All targets that fall within the designated range are affected by the spell. Also excellent for showing a range of sight.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
I'm posting the latest version of my design, as file update on an existing model seems broken… So disregard the other design as it is now missing some files… This new version has a simpler sun gear output axle (no screws, one single part…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
My mom recently gave me my Grandfather's 1950's Melitta 102 porcelain 3 hole coffee filter. I thought it would be a good test for my Revopoint POP 3D scanner. I was able to make an autosurface solid model from the point cloud, but I…
Print approx. €13.20–€16.14 excl. taxPreliminary estimate for PETGSource material: PET
Version : 1.2. The connection holes on both parts are now increased from DIA 1.8 mm to 1.95 mm. It is reported several times as the holes were too tight. Version : 1.1. The connection holes on both parts are now hidden, when the lid is…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
I designed this spoon, since the detergent I bought did not come with a scoop. It is pretty accurate to have a volume of 30ml when filled to the brim. The design is stable and strong and can be printed lying on the top side without…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Easy to make a cute Cup of Coffee keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
I got sick of spilling on my hands and burning myself on my morning coffee, so I designed this... I hope you like as much as I do. Definitely something I can't live without, and 3d printing saved the day once again. Print instructions I…
Print approx. €6.30–€7.70 excl. taxPreliminary estimate for one variant
Do you want coffee? A special variety (gold, red, ..)? Why not!!! Don' t use mill ;o)
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Eine süße Giraffe im Voronoi-Stil. Dieses Modell habe ich auf Wunsch meiner Tochter gefertigt. Achtet beim Druck auf die Haftung bei den Beinen, ich habe diese extra stützen müssen. Das Modell wurde mit meinem Prusa MK4 mit eSun HF PLA…
Print approx. €5.73–€7.01 excl. taxPreliminary estimate for one variant
Easy to make a cute Mouse with Coffee Keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
🇬🇧 : Created by me based on an existing image No special instructions. No supports, minimum filling for resistance. Printed on a prusa mini in 0,6 and a sunlu S8 pro in 0,4 and nothing to report. Printed very well. Don't hesitate to share…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Schwibbogen mit der Seiffener-Bergkirche mit Kurrende Figuren. Modell ist von mir selbst entworfen und mit Fussion 360 erstellt. Es wird noch eine 10er LED Mini Lichterkette für die Beleuchtung, Kleber und etwas Geduld benötigt. Ich habe…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
Easy to make cute Yorkie with coffee keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Use this spoon to measure the volume of instant coffee you get from one stick. I printed this part in PETG, with a 0.6 mm nozzle. Update: added a spoon with a longer stem.
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Štylový kavový podšálok s motivom a stojanom. Ak sa ti model páči klikni na srdiečko a ohodnoť hviezdičkami. Ďakujem. Stylish coffee saucer with motif and stand. If you like the model, click on the heart and rate it. Well thank you.
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
I recently added a heat pump to our pool, so I had to redo some of the piping and needed some brackets to hold them in place. Off the shelf brackets didn't work so I made my own ones and thought I'd share them, in case someone has the…
Print approx. €2.27–€2.78 excl. taxPreliminary estimate for PETGSource material: PET
Spell AoE (Area of Effect) Damage Marker for Tabletop RPG Games on a Standard Square Grid. This Model includes multiple areas in one object, so you don't have to carry 5 to 8 AoE-Markers around. It has also different heights for different…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
Easy to make a cute Pufferfish keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Giraffe cookie cutter inclunding stamps
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
toilet seat buffer, I printed it in PLA and works just fine. Created with OpenSCAD
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Buffer space hook which allows screwing the buffer 10° angled.
Print approx. €1.27–€1.56 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple dosing cup for the Sage (or Breville) Dose Control Pro or Smart Control Pro coffee grinder and fits in its 58mm portafilter-holder and the portafilter itself without making a mess. It can be printed in PLA without any…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
Ablage für Pfannenwender und Löffel mit praktischer Auffangschale für Tropfen. In PETG gedruckt auch spülmaschinenfest. ---- en ---- Holder for spatula and spoon with practical drip tray. Printed in PETG also dishwasher safe.
Print approx. €4.99–€6.10 excl. taxPreliminary estimate for PETGSource material: PET
A simple modern-looking hanger for the Swiffer mop, using double-sided tape. Hope you find it helpful :)
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
differential - functional model
Print approx. €8.19–€10.00 excl. taxPreliminary estimate for one variant
Another coffee cup/mug coaster. I've included the Prusa Slic3r .gcode for the colour change. Print instructions Category: Kitchen & Dining Summary Another coffee cup/mug coaster. I've included the Prusa Slic3r .gcode for the colour…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
PTFE-Schnellkupplungen zwischen MMU2S und Puffer Print instructions Um die PTFE-Schläuche zwischen MMU2S und Puffer möglichst einfach und schnell abzutrennen habe ich zwei Adapter für den S-Puffer zum Drucker (Typ C1) entworfen. Vor allem…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
I made this for my DM. I wanted something a little bit sturdier than one of the vase mode designs, and in a single piece, so that it was easier for her to transport. Cone and Cube templates are available too. 10ft, 15ft, 20ft, 30ft, &…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
5 ml Meßlöffel für Flüssingdünger Hier ein kleiner Meßlöffel für Flüssingdünger. Die Füllhöhe bis zur Markierung ist 5ml. Mittels des Lochs im Griff kann man den Löffel aufhängen. Schichthöhe = 0,1mm Translation DeepL 5 ml/ (0.30512 in³)…
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: This new…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
Print directions | PETG material recommended but any material works fine, recommend 0.2 mm layer height or less for smoothest results on the angled edge. Easy print, no supports required.
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
I love my Comandante manual coffee grinder but I always forget to how many clicks I had set my burr, especially when switching between coffees and brew methods. So I created this little counting gadget in Comandante style. It makes a nice…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Giraffe wall art or decoration with geometric design You can also use it as a coaster under your cup or a key chain Easy to print Model is scalable for your needs Printing informations: No supports Printing very good with any filament…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Color coding the filament path is simple and with just a glance you can see which filament is being extruded. This saves time and helps prevent printing mistakes. History One of the issues I have always seen is filament pushing through…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Small grids are super useful for organizing stuff in moving boxes, closets, cabinets, drawers and so on. But 3d printing big ones would take a lot of time and filament, and require you to have a huge printer. Luckily cardboard exists and…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
I made this for my DM. I wanted something a little bit sturdier than one of the vase mode designs, and in a single piece, so that it was easier for her to transport. Circle and Cube templates are available too. 10ft, 15ft, 20ft, 30ft, &…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Der Messlöffel ist mit Markierungen für die Füllmengen 10 ml, 15 ml und 20 ml versehen. Wir nutzen ihn, um den Reiniger für den Saugroboter abzumessen. Zur Erinnerung sind die Füllmengen eingedruckt. Der Löffel passt bei Nichtgebrauch gut…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
Old hanging coffee filter holder need to be replaced. I need one that can hang or can stand on the table. I decided to design my own. I have accepted the print time which is more than 8 hours, to get a sturdy model, otherwise I need to…
Print approx. €0.36–€0.43 excl. taxPreliminary estimate for one variant
Ein Satz verschiedener Haken zum Schrauben oder Kleben. Wir nutzen diese Haken als Schlüsselbrett. Die Bohrungen sind ausgelegt für Holzsenkkopfschrauben Durchmesser 2,5mm. Ungenutzte Bohrungen kann man mit "Abdeckung Bohrung" und etwas…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
Minimalistische Kaffeetasse – 2D-Wanddeko Diese stilisierte Kaffeetasse im modernen Linien-Design ist eine dekorative 2D-Wandkunst aus nur einer durchgehenden Kontur. Ideal für Küche, Café oder Kaffeeliebhaber-Ecken – schlicht, elegant…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
The original parts do not make the buffer stable, and attaching it to the printer is not an option with the enclosure. The model contains several parts: a higher leg (+1 cm), a back-, top and bottom segmenter with honeycomb, and a plate…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
Bosch Siemens Neff Coffee Maker Brewing Unit 11014117 part. When the brewing unit is blocked, this slider thing could fix it. Some pictures attached.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
I made this for my DM. I wanted something a little bit sturdier than one of the vase mode designs, and in a single piece, so that it was easier for her to transport. Circle and Cone templates are available too. 10ft, 15ft, 20ft, 30ft, &…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
I made this in Blender at the beginning when io just learned to 3d model. Use other giraffe models as inspo to make it
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Revision 2 Dies Das ist Revision 2 des offenen Cookit Deckels und ersetzt die beliebte Vorgängerversion . Diese Revision ist passgenauer und vor allem formstabil. Die Vorgängerversion verformte ich mit der Zeit vor allem bei…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET
I resized the design to fit a 51mm Portafilter and adapt it to the thickness of the notches of the model.
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
8 Verschillende bolders voor de modelbouw 1/87ste om boten aan te meren aan de kade. Ik heb het op ware grote getekend en dan verschaald naar 1.15 voor 1/87 te bekomen. Voor de modelbouw zal het niet te veel moeite kosten om met wat…
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
100x160mm signs, showing a representation of the caffeine molecule, one also including the text “caffeine” for those not yet able to recognize it at a glance. Best with color switch above 1mm, as with included gcode file. Also see the…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
Nepalese Koozie with Griffen Handle Not AI. Rendered in Blender. Designed in Blender
Print approx. €15.26–€18.65 excl. taxPreliminary estimate for one variant
Keychain "Coffee Time" Change the size and height at your discretionIt is possible to make it two-color.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-1mm Layer: 0.32-0.6mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Print approx. €17.02–€20.80 excl. taxPreliminary estimate for one variant
Bird nesting house with 3 different looks Timber frame, Bricks and Football. You will need all the common files and a set of one of the designs to make a house This Bird house can be assembled mostly mechanically, only the Rooftop of the…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
We got a free aerator in the mail. Pretty decent and lets you pulse the thing with a springy button switch on the top. Anyways, it didn't come with a stand and laying it down on it's side was a big NO-GO. Spent an hour in Fusion 360 to…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
Der Knopflöffel erleichtert das Schliessen von Knöpfen. Eine Praktische Hilfe zum Schliessen einer Schiessjacke. Knopf mit Knopflöffel durch Knopfloch einhängen Knopf mit Knopflöffel durch Knopfloch ziehen Durch drehen des Knopflöffels…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Simple Flower Coffee Stancil Material: PLA, PET-G, ABS, ASA etc. Layer high: 0,3 or lower Nosupport needed
Print approx. €0.36–€0.45 excl. taxPreliminary estimate for one variant
This the Benjamin Franklin Clock version that B&B TECH shared. However, I wanted a better mounting for the clock and a more appropriate pendulum bob that suited my 6mm dowel. I also had lead sinkers on hand to use as weights and therefore…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
Odměrka na kávu, cukr a podobné sypké hmoty (Measuring cup for coffee, sugar and similar loose materials)
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
I thought Sue said she wanted me to make a RYOBI coffee maker, but it turns out she just wanted a cup of coffee. So here is my project in case you need a battery powered hot water / coffee make ;-) There are two versions and a couple of…
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix that uses the scad file provided but the original designer to make a template for every Frosthaven class. I added the Gcode for a .25 nozzle and noted the color I use for each character in the filename. note some…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
was walking through IKEA when i seen this vase called the RaffelBjork, and i thought this would be a neat thing to print, went home and slapped something together based on a few photos i grabbed of it
Print approx. €5.34–€6.53 excl. taxPreliminary estimate for one variant
Kitchen Toy : Antique Coffee Grinder
Print approx. €9.90–€12.11 excl. taxPreliminary estimate for one variant
coloured in the italian flag colours. #italian #coffee #love #bialetti
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for one variant
I purchased a new puc and coffee distributor for my Oster expressor machine. I needed something to hold the portafilter steady without making a mess and also to store it all afterards. This simple print will work for most portafilters…
Print approx. €7.20–€8.80 excl. taxPreliminary estimate for one variant
🇺🇸 Do you know the problem of your bed sheet always being all messed up in the morning? Me too. That's why I created this little holder that prevents your bed sheet from slipping. Grabs your sheet and gets fixated by the matress. 🇩🇪…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Print it at least from PETG. DO NOT USE GCODE INCLUDED HERE. I use Vcore3 with Klipper and its Gcode flavor (and macros) isn't supported here, on printables.com (so this file contains Marlin flavor approximation). Included gcode is just…
Print approx. €4.87–€5.95 excl. taxPreliminary estimate for PETGSource material: PET
This is an adapter to fit a pour-over coffee dripper on various sized coffee pots. The hole in the middle has a diameter of 45 mm, the small step is at a diameter of 100 mm and the outside diameter is 120 mm. Print in PETG or a similar…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET
I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
Ive included the fusion file if you want to tweak it. G-Code is for a fast print with .6 line width and faster speeds, Concentric top infill and .3 layer height. Its what I used to print mine
Print approx. €5.40–€6.60 excl. taxPreliminary estimate for one variant
Dies ist ein simpler kleiner Löffel. Wir nutzen ihn um Vogelfutter in ein Vogelhaus zu tun. Der Boden ist mit Sekundenkleber eingeklebt. Translation DeepL This is a simple little spoon. We use it to put birdseed in a birdhouse. The bottom…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
This stand is designed for an acrylic glass plate with a width of 135mm and a thickness of 4mm and a height of approx. 150mm. It is easy to print in two parts and without support. The acrylic glass plate is illuminated with a WS2812 LED…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET
Replacement part for the coffee machine dispenser height adjustment handle in De' Longhi ECAM 20/22 (De'Longhi Magnifica S). It is not exact copy of the original part. It is optimised for 3D printing. The change doesnot influence the…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
I didn't like how the buffer held on (barely) to the printer, doesn't work with the loading fork, or was in the way when printing without the MMU. After trying other solutions without satisfaction, here's my attempt to fix all 3! More…
Print approx. €6.91–€8.45 excl. taxPreliminary estimate for one variant
I recently purchased a manual coffee grinder which came with a small cleaning brush. The subsequent acquisition of an air blower has added to the number of tools floating around on my kitchen counter. This simple print should hold two…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
The model can be printed without support material.
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Model eiffelovy věže - z modelu pro laserové řezání
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
