Search results: fiber

Sort order

722 models

P
PrintablesMaple DIY

Build Plate Cleaner Microfiber Holder

Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant

Downloads
51,884
Likes
18,248
Rating
4.95
P
PrintablesPrusament

PETG Carbon Fiber Prusament Clamp

The redesigned version of the original Prusament Clamp for PETG. This lighter version saves material but is still perfectly strong using PETG Carbon Fiber. The remix is designed by Josef Franc ( ropak ).

Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,748
Likes
343
Rating
4.88
P
PrintablesDeeDee

Air assist connector for fiberlaser

Air assist connector. Designed for direct connection of quick coupling and flex hose 1/4" thread with minimal stress on the printed model. I recommend inserting O ring 11/2 Printed without support. PETG / layer 0.1 !!! / perimeters 5x…

Print approx. €1.53–€1.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
344
Likes
39
Rating
0
P
Printables3Delivery

Mask breather for fiber knit mask

Grade respira melhor para mascara fiber knit Grid breathe better for fiber knit mask Print instructions Print vertical without support

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant

Downloads
162
Likes
56
Rating
0
P
PrintablesFlying printer

Werner fiberglass ladder tool caddy

There's only so much space at the top of the ladder for tools, so I decided to make a box that clips into one of the existing holes in the top of ladder. Werner has updated the top plastic part of their fiberglass ladders and now has a…

Print approx. €18.41–€22.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
105
Likes
6
Rating
0
P
PrintablesDeeDee

Sliding aiming mark for fiber laser

You need a square nut M3 and an Allen screw M3x6mm

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
96
Likes
20
Rating
0
P
PrintablesDerKuchenmann

Cable tower modification for fiber optic cable outdoor (THW Lattenschere)

7x threaded inserts M3 2x threaded inserts M6 7x M3x8 DIN 7991 2x M6x16 DIN 933

Print approx. €4.92–€6.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
46
Likes
15
Rating
5
P

Verizon Cable Clip Cable Hanger for Fence for FIOS Fiber Optic Cables

This is a clip to attach a cable to a fence. Nail a normal nail into the fence, place the cable in this clip, and then hang it on the nail. If you want this already printed and mailed it is available to purchase here. I am the only one…

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
7
Rating
0
P
PrintablesPrivate Butts

Fiberpunk Sentry Camera Screw Mount

An adapter to mount a camera screw style Sentry case (like what comes with Sentry Pro) to the official arm. Tested on a Prusa mk3s.

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
39
Likes
3
Rating
0
P
PrintablesKeepy

TP-LINK XN020-GV3 Fiber Router stand

Stand for TP-LINK XN020-GV3 Fiber Router.

Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
2
Rating
0
P
PrintablesCellcon

Rackmount for Nokia ONT G-010G-Q Glasfaser Fiber Modem

Rack mount for Nokia Fiber Modem, which provides easy access to the connectors, while keeping the LEDs visible as well.

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
1
Rating
0
P
PrintablesRafaelAlves14

Optical Fiber Suport

This model was made for a Plasmonics Internship, where I had to secure the optical fiber. It has a special end to it from another equipment, which I do not record (probably a spectrometer). This model was, in part, inspired by the "…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
4
Rating
0
P
Printablesmkronmiller

UCG Fiber 30W Power Brick 10in Bracket

Designed a small bracket to attach to the back of the UCG Fiber 10in Rack mount to help manage wires and bricks a bit better. It is affixed with 2x M3x16 SHCS. I wanted to use four ideally but unfortunately there isn't enough room and I…

Print approx. €2.41–€2.94 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
0
Rating
0
P
PrintablesMake It Lab

Airless Basketball - FiberFlex 30D

Please read this before downloading/printing! This is our new airless basketball model made for the Fiberology FiberFlex 30D filament. This filament has the best bounce and durability out of all of the airless basketballs/airless…

Downloads
2,927
Likes
497
Rating
3.5
P

Unifi UCG-Fiber 19-inch Modular Rack Mount

A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi UCG-Fiber cloud gateway. This mount is part of a 19-inch modular rack mount system I designed. You can mix and match the modules with other mounts. Take a look at my models here…

Downloads
2,676
Likes
193
Rating
4.83
P

Unifi UCG-Fiber 10-inch Rack Mount

A 10-inch rack mount for the Ubiquiti Unifi UCG-Fiber cloud gateway. This model comes in 4 variants: With front cutout for power cable routing With holes for M3 thread inserts. → UCG-Fiber 10i RM for Thread Inserts.stl With holes for…

Downloads
1,999
Likes
187
Rating
5
P
PrintablesStamos

Hifiberry Case

HiFiBerry Player If you enjoy listening to music you will really love this tiny music player! The player consists of: RaspberryPi 3B+ or RaspberryPi 4* HiFiBerry DAC+ PRO or HiFiBerry DAC-2 PRO (added 22 Jule 2025) Additional accessories:…

Downloads
1,751
Likes
147
Rating
4.92
P
PrintablesBIGRED

M.2 SSD Tray for UniFi Cloud Gateway Fiber.

The only thing worse that the subscription model, are overpriced accessories that should have been included! I made this for myself, as I will only use it with a 2280. So, if you're are only going to use a 2280 too, have at it. Includes a…

Downloads
1,384
Likes
98
Rating
4.78
P

CARBON FIBER TEXTURE - TEXTURA DE FIBRA DE CARBONO

Hello everyone, learn the technique to reproduce the texture of carbon fiber on any printer, using normal materials. Please watch the youtube video, and feel free to like, subscribe and share! Feel free to comment on improvements and…

Downloads
1,309
Likes
96
Rating
4.67
P

UCG-Fiber PSU 19-inch Modular Rack Mount

A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi UCG-Fiber Power Supply Unit (PSU). This model comes in 4 variations: A plain mount, just for the PSU. A version with keystone slots. A version with a shelf. A version with the…

Downloads
1,252
Likes
96
Rating
5
P
PrintablesPrusament

PC Blend Carbon Fiber Prusa Pulley

The redesigned version of the original Prusa Pulley for PC-Blend. This lighter version saves material but is still perfectly strong using the PC-Blend Carbon Fiber. PC-Blend Carbon Fiber is slightly lighter than unmodified PC-Blend, with…

Downloads
1,070
Likes
291
Rating
4.94

Qidi Plus 4 Fiberon Profiles

Overview A good starting point for the Fiberon line of filaments for the Qidi Plus 4. These filament profiles are for a .4 nozzle and are for Orca Slicer . Download Download the file normally, this should open up the file in a new tab in…

Downloads
920
Likes
119
Rating
5
P

CARBON FIBER TEXTURE! TEXTURA DE FIBRA DE CARBONO!

**Add texture to your pieces!** Tired of printing those dull flat bases or just using the "Hilbert curves" pattern? Your problems are over! print the carbon fiber texture right now, on your PLA pieces (or any other material you want), and…

Downloads
870
Likes
196
Rating
5
P
PrintablesJörg R.

FritzBox 7590 AX V2, 5590 Fiber, 7690 Stand (Ständer)

I want to create a stand for the FritzBox 7590 AX V2 which provides the following features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should be…

Downloads
869
Likes
33
Rating
4.8
P
PrintablesPrusament

PA11 Carbon Fiber Planetary Gearbox

Opening model of planetary gearbox for Prusament PA11 Carbon Fiber. The model was specially designed for this type of material as a presentation of the applicability of polyamide material in practice. This is a working model of the…

Downloads
853
Likes
244
Rating
4.6
P
Printablesmikenelsonio

Unifi Cloud Gateway UCG Fiber Wall Mount

This model was originally on Printables where the creator posted his .step file for editing. It's been mixed a few times but as the smaller Max and Ultra Unifi models. This is for the Unifi Cloud Gateway Fibe r unit. It's a wall mount…

Downloads
807
Likes
38
Rating
4
P
PrintablesEXEN

UCG-Fiber SFP+ Module Cooler (X-ONU-SFPP, WAS-110)

This is a cooler that mounts on top of the UCG-Fiber to cool the SFP+ port. Specifically made for the WAS-110 and X-ONU-SFPP modules. You can find pre-soldered DIY fan + power module kits here: https://exen.sh/products/diy-kit-ucgf-cooler

Downloads
619
Likes
63
Rating
5

Align Jig Fiber Laser Fixture Set

Align Jig Fiber Laser Fixture Set

Downloads
575
Likes
57
Rating
5
P
Printableslipos

Fiber optic splice tray v2.0

Cartella organizzatrice per giunzioni in fibra ottica impilabile. Stackable splice tray folder for fiber optic splices.

Downloads
573
Likes
34
Rating
0
P
PrintablesMinietec

fiber-optic cable box / optical fiber storage box / Glasfaser Box

Simple storage box for the slack of a fiber-optic cable. The box ensures safe storage so that the cable does not fall below the typical minimum bending radius. There are different sizes available. Each box is 9x9 cm large. Only the depth…

Downloads
567
Likes
73
Rating
5
P
PrintablesSTORM DESIGN

Centering Disc for Fiberlogy New Filament Spool - Compatible with Bambu Lab Filament Spool Switcher & Winder

his is a Remix “Centering Disc for Fiberlogy New Filament Spool" for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 I modified the centering discs to fit the Fiberlogy New Filament Spool. Update…

Downloads
546
Likes
75
Rating
5
P
PrintablesDave Aldrich

12.5 Inch Dobsonian Telescope | Carbon Fiber | V2

Consider supporting my work on Patreon: https://www.patreon.com/c/Designbydave UPDATE: New version 2 of the altitude gear system now available. - Now using module 1.25 gears instead of 1. Larger, stronger, more printable gear teeth. - New…

Downloads
540
Likes
118
Rating
0
P
Printablesjprince

Ubiquiti Cloud Gateway Fiber wall mount (UCG-Fiber)

Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…

Downloads
537
Likes
40
Rating
5
P
PrintablesUrzhiataer

Fiber Lamp - WLED

Hi Maker, Here an easy DIY for building a Fiber Lamp using WLED. Based on an original idea of andrei.erdei, but completely redesigned (bigger with 36 leds, improved, simpler with WLED) This fiber lamp is controlled exclusively in WIFI via…

Downloads
523
Likes
723
Rating
4.94
P
PrintablesPieterB

HifiBerry DAC+ ADC (Pro) case for RPi 4

Case for a Raspberry Pi 4 with a HifiBerry DAC+ ADC or HifiBerry DAC+ ADC Pro hat. Designed in OpenSCAD. With the provided OpenSCAD files, it is easy to modify for other HifiBerry models. Comes in three variants: one with a print-in-place…

Downloads
513
Likes
38
Rating
5
P
PrintablesJohn

Holder for: Build Plate Cleaner Microfiber Holder

A holder for the BPCMH ( https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder ) wich fits the Hex Wall (Honeycomb Wall) but also the XL (with hammerhead nuts) and also can be fastened with screws to a wall. I used…

Downloads
513
Likes
148
Rating
4.92

Fiber Laser Lens Holder

I printed this on my Ender 3s1 plus and used .28 layer thickness and 5% girod infill. The holders sit in a drawer so I did not need anything stronger. The lens holder printed perfectly. If you want it stronger/thicker, use different…

Downloads
486
Likes
53
Rating
5
P
Printablesmfischer79

SFP Fiber Optic Dust Cover/Plug/Cap

Simple and quick print. Easy to remove! Check out all other port covers USB-A port cover - https://www.printables.com/model/404578-usb-a-dust-cover-plug USB-C port cover - https://www.printables.com/model/303039-usb-c-dust-coverplugcap…

Downloads
476
Likes
73
Rating
4.71
P
PrintablesShaggyx86

LC Fiber Cap

3D Printable LC fiber cap, also has pass through hole in the bottom for strings, hooks etc. Printed on: Prusa MK3S+ Supports Needed: No, print part with holes for LC connector facing upwards

Downloads
470
Likes
47
Rating
5
P
PrintablespDrugos

Airsoft Glock Optic fiber sights

Simple sights for use in a airsoft GBB glock (Used a R17 Army Armament as reference). Use 1.5mm fiber, glue is optional.

Downloads
455
Likes
61
Rating
0
P
PrintablesNick Dollimount

Unifi Cloud Gateway Fiber Wall Mount

The Unifi Cloud Gateway Fiber device does not come with a wall mount option like a lot of Ubiquiti's devices do. So this model allows you to wall-mount your UCG Fiber. It's designed to allow you to place the device in it with the cables…

Downloads
452
Likes
34
Rating
4.75
P
PrintablesVolan

Fiberoptic WLED Hybrid Wall Clock (40cm) v6.2

--------------------------------------------------------------------------------------------------------- Clock running WLED above. No, you don't need a large printer to make this. It's split into 6 segments. In fact - it should be…

Downloads
446
Likes
290
Rating
5
P
PrintablesFlight777

Bambu Lab - Spool Adapter - Fiberlogy Refills

This adapter allows perfect fitting of Fiberlogy Refill filament bundles onto Bambu Lab Reusable spools, or self printed spools that have the same size and notch as those of Bambu Lab. It has cut-outs to allow the tie-wraps go in and cut…

Downloads
444
Likes
75
Rating
4.67
P
Printablesfryeguy

Glock RMR LEGO "Fiber Optic" sights

Remixed XDr4g0nX thing to fit an RMR cutout

Downloads
440
Likes
64
Rating
0
P
PrintablesEmemell

Fiber Optic Connector Junction Box

A junction box for terminating fibre optical cable to LC or SC connectors. It has a hole for a 20mm stuffing gland, two screw holes for wall mounting, cable guides for the slack fibre, and four slots for splice protectors. I printed in…

Downloads
427
Likes
46
Rating
0
P
PrintablesSorcier

Optical fiber loopback

This design allow to create and keep a loop for the fiber and avoid damaging or breaking it just put double-sided to fix it in the network cabinet. Supports are required for hooks.

Downloads
425
Likes
66
Rating
5
P
PrintablesEthelder

Fiberflex 40D printing profile. (for MK3S, but might work on newer too)

Tuned profile for printing with Fiberflex 40D filament. Optimized for use with supports, HQ surface finish and multiple parts printed at once. Out of the box, you get a little bit of stringing, and also great finish and flat seams. Below…

Downloads
418
Likes
20
Rating
5
P
PrintablesCNCPadawan

Fiber Laser Fixture Set

I have recently purchased a fiber laser, and while it has this handy bed with a lot of tapped holes, there are no pieces that came with it to utilize as fixtures. Amazingly, I didn't find anything out there for models of these, so I made…

Downloads
416
Likes
52
Rating
0
P
PrintablesMartin Tošer

Skull of a Eurasian beaver (Castor fiber)/Lebka Bobra evropského

EN version: The original Scan was made by the Mammal Research Institute, Polish Academy of Science during the Open Forest Data project . You can download the original data here . :) I fixed the model to make it printable. The skull is not…

Downloads
395
Likes
57
Rating
0
P
PrintablesRobertCowanDIY

Fiber Laser Air Duct (Cloudray and Gweike)

This duct can be used with fiber lasers with threaded bases. The mounting holes span between 100mm and 112mm. It works great on Cloudray and Gweike fiber lasers. It adapts to a quick-disconnect duct. The magnets are 12mm x 8mm N52. They…

Downloads
390
Likes
73
Rating
5
P
PrintablesUko

Unifi Cloud Gateway UCG Fiber Wall Mount

My version ended up a bit tight. Maybe it's because of ASA shrinking. Maybe because of the slight warp. But maybe it's just a bit tight. The screw holes are for M4 screws. I decided to mount the device with it's “top” surface towards the…

Downloads
386
Likes
19
Rating
0
P
Printablesron

Modular case for Raspberry PI4 and an HiFi hat (Audiophonics, Hifiberry) or custom

Maturity Very Good 12 prototypes. In use since 2023/10. Model design from scratch. Hardware Hat spacers are 11mm height (as Adafruit quotes Nigel Tufnel's “These go to eleven”). The part “PiAndHatCase-rxx - Entretroise” is if you missing…

Downloads
371
Likes
29
Rating
5
P
Printablesnikdo_nic

fiber laser jig for round objects

universal jig for round objects

Downloads
355
Likes
37
Rating
0
P
PrintablesCoolbruh

40mm Coin Jig for Fiber Laser

A quick and simple print to help keep your 40mm coin centered as well as making it easier to keep both sides of the coin straight to one another. Once the first side of the coin is engraved, put the alignment bracket on top of the coin…

Downloads
354
Likes
42
Rating
5
P
PrintablesTenTwelve

40mm Coin Jig for The Gweike G2 Fiber Laser

I designed this coin jig to tightly hold a 40mm and to slide securely in to the holes of the work plate on a Gweike G2. Now, it could very easily work on other machines. This is my first fiber laser and I do not know if the hole spacing…

Downloads
341
Likes
39
Rating
4.67
P
PrintablesDeeDee

Intake ducting for fiber laser table

Diameter 150mm https://www.printables.com/model/1225484-intake-ducting-for-fiber-laser-lable-diameter-150m Diameter 125mm https://www.printables.com/model/1306010-intake-ducting-for-fiber-laser-table-diameter-125m Diameter 100mm…

Downloads
338
Likes
47
Rating
0
P
Printableskapik1

Fiber optic cable termination / splice/ repair box

Fiber optic cable termination / splice/ repair box for small drop or blow cables. Termination and repair after damage.

Downloads
335
Likes
53
Rating
5
P
PrintablesFilip Sośnicki

Fiber polarization controller

Fiber polarization controller (FPC) developed as an open source alternative for commercial ones. Thanks to the user-specified fiber-loop diameter, it allows printing the FPC for a given wavelength, with single-paddle operation very close…

Downloads
329
Likes
14
Rating
0
P
PrintablesSTORM DESIGN

Sleeve for Fiberlogy New Filament Spool - Compatible with Bambu Lab Filament Spool Switcher & Winder

This is “Sleeve for Fiberlogy New Filament Spool” for an amazing project " Filament Spool Switcher & Winder ". Design by @MiklosKiszely_486882 I consume a lot of Fiberlogy filaments. So I'm left with a lot of empty spools. The new…

Downloads
327
Likes
87
Rating
0
P
Printablescewo

Magnetic Holster (Build Plate Cleaner Microfiber Holder)

Simple holster with a pocket fitting a ø20x5 mm magnet to store the Build Plate Cleaner by @kstudioca_1569715. Top and bottom layers are not strictly necessary. Check out my short and longer magnetic knobs here .

Downloads
316
Likes
79
Rating
5

Unifi Cloud Gateway UCG Fiber Wall Mount - Bottom Ports

Larger spacing in the bottom so the device can be mounted screen top / ports bottom. Printed in PETG, holds the device really well.

Downloads
311
Likes
28
Rating
5
P
PrintablesMoritz

HiFiBerry Case Cover for the HiFiBerry Digi+

Cover for the HiFiBerry Case when used with the HiFiBerry Digi+ Print instructions Print all parts except the cover from the original design.

Downloads
310
Likes
20
Rating
5
P
PrintablesChewey

Daisy Red Ryder BB fiber optic front sight

This is an upgraded front sight piece to accept a 1.75mm filament piece. If used with a bright clear/transparent colored 1.75mm filament, it works as a fiber optic front sight. Even a plain white filament is much higher contrast than the…

Downloads
309
Likes
27
Rating
0
P
PrintablesSuperPilot

UCG-Fiber Keystone and Power Supply 1U 19" Rack Mount Bracket

Designed for use with the UCG-Fiber Rack Mount by @Mauker. This panel provides keystone jacks for the 1 x 10 Gb RJ45 WAN port (isolated on one side by the power supply bracket) and 4 keystone jacks for the 4 x 2.5 Gb RJ45 LAN ports on the…

Downloads
306
Likes
23
Rating
0
P
PrintablesSNR Tech Bytes

Fiber Optic Racetrack

Fiber optic spool holder with racetrack to manage extra fiber. I used this to extend my ISP's fiber and couple it into extra fiber in my house. Has a spot for a panel mount coupler as well. Print it on the bottom face and let the back…

Downloads
291
Likes
60
Rating
5
P
PrintablesE For Extrude

Fiberlogy New Style MasterSpool Repalcement Spool Holder

Here is my Masterspool inspired by Fiberlogy's new 2023 spool design. These were first shown at Formnext in November and look really cool. Apparently the new spools will be reusable for their refill packs but as its early days, no one has…

Downloads
290
Likes
57
Rating
4.75
P
Printablescewo

Magnetic Knob (Build Plate Cleaner Microfiber Holder)

Just a knob with an inlaid magnet to store the Build Plate Cleaner by @kstudioca_1569715 against a metallic wall or the printer enclosure. Neodym magnet: ø10x5 mm Update 20240401: Increased tolerance settings for the thread…

Downloads
289
Likes
80
Rating
4.67
P
Printablestwei

Gridfinity 8 SFP+/SFP28 Fiberoptic Transceiver holder

This Gridfinity-Compatible Organizer allows you to store up to 8 SFP/SFP+ Fiberoptic Transceivers.

Downloads
283
Likes
25
Rating
5
P

UCG-Fiber PSU 10-inch Rack Mount

A 10-inch rack mount for the Ubiquiti Unifi UCG-Fiber Power Supply Unit (PSU). This model comes in 4 variations: A plain mount, just for the PSU. A version with keystone slots. A version with a shelf. A version with the keystone slots and…

Downloads
278
Likes
35
Rating
5
P
PrintablesFruitieX

UCG Fiber rack mount bracket (1U, 10 inch)

NOTE: The UCG-Fiber is a tight fit inside a 10 inch rack. Before printing, please make sure there's at least 216mm space between your rack rails, otherwise this bracket won't fit. I tried designing this so it doesn't use up too much…

Downloads
277
Likes
26
Rating
5
P
PrintablesLinas LY2H

Guy Rope Collar for the 10m Spiderbeam Fiberglass Mast

It's a guying rope collar to support the guying ropes on the 10m fiberglass mast from the Spiderbeam company. The outer diameter of the collar is 110mm, the inner diameter - 53.4mm (this includes some 0.4mm overlap for the bead of…

Downloads
276
Likes
21
Rating
5
P
PrintablesSASSy Design

Flow Vase - Decorative Vase design - Fiberlogy Collection

~ Fiberlogy collaboration series ~ We are introducing to you a whole new collection of vases available for free! This is the effect of a great collaboration with Fiberlogy. They invited us to test their new filament series and share the…

Downloads
268
Likes
26
Rating
5
P
Printablesmgrobins

Unifi UCG Fiber 19" Rack mount with PSU mount, Keystones and slicer mods for Front Power Cable

EDIT Jun 2025: Updated models 9 Jun 2025. Improved the power cable cutout and increased the rigidity of the models in the mid section where they join and across the PSU holder. EDIT 2: Nov 2025. I am not able to do more mods on this. A…

Downloads
265
Likes
15
Rating
0
P
PrintablesDave Aldrich

Carbon Fiber Telescope 6 Inch f/8 Newtonian Reflector

Build Video - Consider supporting my work on Patreon: https://www.patreon.com/c/Designbydave Files and info on my web site - https://designbydave.net/3d-printed-telescope/ STEP file is included so you can modify and print how you like.…

Downloads
252
Likes
41
Rating
0
P
PrintablesPyrex

Fiber Laser Focusing Stick - 300mm Lens

This is a focal stick for a 300mm f/theta lens. It has adjustability between 453-473mm, with the nominal focus range of a 300mm lens to be ~460mm. It is more rigid and requires only one M3 screw and nut to solidly lock in place (or you…

Downloads
249
Likes
26
Rating
0
P
Printableswillnewton

RC Sailboat keel fin for IOM carbon fiber mold

This set of files are used for building the mold for making a carbon fiber keel for a one-meter sailboat. There is a full keel mold half STL file to use and modify for any format printing as you like. There are two split mold half STLs…

Downloads
246
Likes
13
Rating
5
P
PrintablesMixmeister

Unifi - UCG Fiber rack mount 19 inch

Made some changes so it fits a 19 inch rack. adapted the mounts from @Mauker Parts 3x M5 screws 3x M5 hex nuts. thx to @FruitieX 26/3 Model - Removed the small front cutout in the front plate, and removed the honeycombstructure on the…

Downloads
243
Likes
25
Rating
5
P
PrintablesKeN3D

Guides For Fiber Laser

Fiber Laser Guides Set No Bolts/Glue Required Just Drop In - 3D print I have included two STL files having a horizontal guide and A 90° guide. The horizontal guide is: 6 cm ( 2 in ) long and 1 cm ( 0.4 in ) Wide 3D printing settings Raft:…

Downloads
234
Likes
34
Rating
0
P
PrintablesPeterLandin

Fiber laser fume extractor holder

So, this is for attaching a 100mm tube on to the buildplate on a fiber laser for good fume extraction. works great.

Downloads
233
Likes
38
Rating
0
P
PrintablesRushey

HiFiBerry Amp2 case for raspberry pi 3

A 3D printable case for HiFiBerry's Amp2 connected to a raspberry pi 3 using the included off stands. With a thin shell and form fitting to the raspberry pi. Used running the HiFiBerryOS and to connect to separate speakers. I contemplated…

Downloads
232
Likes
12
Rating
5
P
Printablesdrei-d-w

Fiberlogy-Refill MasterSpool for BambuLab AMS

A MasterSpool for the BambuLab AMS. Use it for Fiberlogy 850g Refill print material

Downloads
229
Likes
26
Rating
5
P
PrintablesFilip Sośnicki

Fiber component tray

Fiber component tray. Holds up to 2 wider (~5mm diameter) components with two spools to store fibers attached to the said component. One can spool them separately or by using 8-figure. Two magnets on the side to store the tray vertically.…

Downloads
229
Likes
19
Rating
5

WE G17 "Fiber Optic" Sights

After looking around my old LEGO bricks I found a broken antenna that when held up to the light looked a lot like fiber optics. This gave me the idea to use some LEGO antenna bricks as makeshift fiber optics for the sights on my WE G17…

Downloads
227
Likes
37
Rating
0

7" Drone parts for printing in carbon fiber or pla

cut up the drone so it can be printed

Downloads
224
Likes
34
Rating
0
P
PrintablesRonnster

Raspberry PI 2 with HIFIBERRY DAC 2 PRO

Made a small change to the case to fit a HIFIBERRY DAC 2 PRO

Downloads
214
Likes
13
Rating
5
P
PrintablesMiaoucat

Collapsing Jungle Antenna HAM radio SDR Tactical 6mm 8mm fiberglass rod Baofeng HT POTA SOTA vertical GP

[Newest Antenna design from MiaouCat] THE JUNGLE ANTENNA easy to assemble and extremely versatile. using calculators online you can tailor this to any frequency of your liking and get a nice Vertical GP antenna for a few dollars. the most…

Downloads
213
Likes
67
Rating
5
P
PrintablesMossi Brossi

Fiberlogy MasterSpool

Simple MasterSpool, remixed from E For Extrude to work with CatYarn spools, as well as a generic spool that can be used in a rewinder. Printing Guide You more than likely want to be using Arachne perimeter generation when slicing, if not…

Downloads
208
Likes
34
Rating
5

carbon fiber x rail parts for voron v2.4r2 and trident gantrys

Modified gantry parts to use carbonfiber x axis on voron 2.4 r2 and trident gantries, the square insert pieces require 3 5mm heat-set inserts. no supports print to voron print standerds.

Downloads
203
Likes
34
Rating
5
P
PrintablesAlex Chulzhanov

UCG Fiber AC Power Adapter Rack Mount

Neatly mount your AC power adapter brick for the UCG Fiber with this 2U printed part. Simply slot the power brick in and mount to the rack. Takes up 2U of mounting space, but keep in mind you'll need additional space underneath for the AC…

Downloads
201
Likes
29
Rating
5
P
Printablesyolandy

Unifi UCG Fiber SKÅDIS Mount

The UCG Fiber shares the same footprint but with an elongated length. Model has been widened with more mount holes added as well as a cable routing channel. An f3d file has been included to adjust the mounting position if required.

Downloads
201
Likes
15
Rating
5
P
Printableshoccontrol

Keystone to fiber SC/LC converter reverse mount

This model allows you to reverse mount a fiber coupler, in a keystone holder. I needed this model since I had a coupler with a shutter to cover the laser that faced the wrong direction. That why I removed some material in front and pushed…

Downloads
199
Likes
15
Rating
5
P
Printablesnet_dog13

Fiber Optic Splice Box (6x LC Duplex)

I designed this splice box in my free time to help the company I work for to acess fiber optic cables in our building. I designed this custom box, because it had to be placed in a fuse box. Of course you can use it anywhere else. It is a…

Downloads
197
Likes
27
Rating
0
P
PrintablesRushey

HiFiBerry Amp2 case for raspberry pi 4

A 3D printable case for HiFiBerry's Amp2 connected to a raspberry pi 4 using the included off stands. With a thin shell and form fitting to the raspberry pi. Used running the HiFiBerryOS and to connect to separate speakers. I contemplated…

Downloads
197
Likes
22
Rating
4.75
P
PrintablesMostly Flawles

Complement for Yarn Bowl for CatSandwhichFibers

Complement for the cool Yarn Bowl for CatSandwhichFibers. A base and two stands for keep the yarn stand up. https://www.thingiverse.com/thing:2482299 Category: DIY

Downloads
196
Likes
128
Rating
0
P
PrintablesDeeDee

Stackable fiber laser lens holder

Printed without support. PETG / layer 0.2 / perimeter 4x / infill grid 20% Stackable CO2 laser lens holder https://www.printables.com/model/1306003-stackable-co2-laser-lens-holder

Downloads
195
Likes
38
Rating
5
P
PrintablesPXP11

Fiberlogy Refill Spool Core - Minimal Filament Use

This is a core adapter for the new Fiberlogy spools. It's designed for the Fiberlogy 850g refills but can be adapted for other refills. Printing recommendations: If you are using a drybox or plan to use these spools in the Bambu Lab AMS,…

Downloads
193
Likes
20
Rating
4.8
P
PrintablesSquelsh

HifiBerry Case for an Amp100

Could not find an official enclosure so I made my own.

Downloads
190
Likes
9
Rating
0
P
PrintablesH Maki

HiFiBerry Amp case

Remix of Stamos' nice case to house HiFiBerry Amp boards. Should fit for Amp+, Amp2, Amp3 and Amp4. Cases both for RPi3 and 4. Printed using Ultimaker 3 on BASF Bronze PLA filament that has nice metallic look. 0.20 mm layers. Used supports.

Downloads
188
Likes
13
Rating
5
P
Printablesj0shi

RubberDACy, a case for Raspberry Pi 4 and Touchscreen 7" Hifiberry DAC2 HD hat and Apple Superdrive

RubberDACy, a Hifiberry concept case.. Hi, this is my first dive into 3D modelling and complete 3D printing project that met my needs. I couldn't find a complete Hifiberry case that included support for the 7" touchscreen and thankfully…

Downloads
187
Likes
41
Rating
0
P
PrintablesGeorge

Fiberlogy Master Spool Inner Part

I love the Fiberlogy new spool and I use a lot of their refills. But I don't think the inner cardboard part will hold up to wear after repeated use. To prevent any accidents in the future I have designed a replacement to avoid wear and…

Downloads
187
Likes
50
Rating
5