P
PrintablesMadestCat
Gridfinity iFixit Kit holder
A Gridfinity tool holder for an iFixit Kit.
- Downloads
- 207
- Likes
- 46
- Rating
- 5
Search results: fixit
355 models
P
Printablesswablab e.V.
HSW iFixIt Pro Tech Toolkit Holder
A small holder for the accessories from the ifixit pro tech toolkit. I used this holder for the pliers: https://www.printables.com/de/model/540978-hsw-tweezer-holder I used this holder for the Mako Screwdrivers and cutted the holders on…
- Downloads
- 199
- Likes
- 41
- Rating
- 5
P
PrintablesUM3D
stapelbare Schalen mit Deckel und ifixit inlay
Die Schalen wurden passend für die Ikea Alex Schubladen erstellt und das sie kompatibel mit dem sliding-tray sind https://www.printables.com/de/model/886260-sliding-tray-for-ikea-alex-drawer
- Downloads
- 168
- Likes
- 24
- Rating
- 5
P
PrintablesGeoff
Extension Tray for iFixit Essentials Kit
If you're like me and have been accumulating loose extra tools in this kit that fall out when it's opened, then this magnetic extension tray can be stuffed with that excess and more. The top of this tray is made with a small lip that…
- Downloads
- 108
- Likes
- 45
- Rating
- 5
P
PrintablesAasikki
iFixit Pro Tech Toolkit - Holder for Clas Ohlson & Biltema Pegboards
Edit 9.8.2024: One of the screw tabs of my holder snapped, so I uploaded a more reinforced one that should definitely last without issues, also added a cutout for tightening the bottom screw after deciding it wouldn't look that bad after…
- Downloads
- 89
- Likes
- 12
- Rating
- 5
P
Printablesnatlampen
Extender for iFixit Precision Bit Driver
The reach of iFixit bit driver was not sufficient for my use. I created this extender to enable myself to reach to screws. I printed this with the 3 perimeters and 30% cubic infill. I printed it standing with the bit end down. I printed…
- Downloads
- 21
- Likes
- 4
- Rating
- 5
P
Printablesozgur
iFixit 26 bit driver replacement part
I dropped my kit, and the revolving bit carrier part broke it's pivot on the top side. Modeled it and print turned out excellent.
- Downloads
- 20
- Likes
- 2
- Rating
- 5
P
Printablesifixit
iFixit Mako Driver Kit box frame
The original box for the iFixit Mako Driver Kit is held closed by magnets. However, if you often carry the toolkit around, this extension might be useful to you, making the box closable with a latch. All parts are printable without…
- Downloads
- 4,071
- Likes
- 2,119
- Rating
- 4.63
P
PrintablesOnelostcause
Gridfinity iFixit Mako Gen2 with case
This is a storage tray for the iFixit Mako Driver Kit with its original case. It a 5x3 tray for the Gridfinity system by Zac Freedman . This does take up more room than Zac's model for the kit but this allows for easy transport and…
- Downloads
- 2,157
- Likes
- 313
- Rating
- 4.9
P
Printablesdavidmakes
iFixit Mako Screwdriver Mount for Ikea Skadis
About A simple yet secure holder for the iFixit Mako Precision Bit Set for the Ikea Skadis pegboard using the Skadis Ultimount connector. The original design was based on the iFixit Wall Mount (Thingiverse) by TinkerLifeProjects . Neither…
- Downloads
- 1,688
- Likes
- 293
- Rating
- 4.95
P
PrintablesChris Borge
Fixit Fixturing System V1 (Boards)
Introducing “Fixit” (still not sure on the name ;) ) Fixit is a modular system I developed to help with gluing a large number of laser cut objects. It uses a special grid that allows m4 hex head bolts to be slotted in upside down,…
- Downloads
- 1,410
- Likes
- 864
- Rating
- 5
P
PrintablesWhity
iFixit Mako Driver Kit Rugged Box
After the release of the the “ iFixit Mako Driver Kit box frame ” I asked myself, why the heck did I never make a version based on my parametric “ Rugged Box ” to fit the foam insert of the kit. So, I did it now. I included the lid in two…
- Downloads
- 795
- Likes
- 261
- Rating
- 5
P
PrintablesChris Borge
Fixit System Scanning/ Videography turntable
Video: Standoffs: Currently needs 320mm bed space. STEP file included if anyone wants to modify for smaller printers, its not something I will have time for any time soon sorry. A large turntable that uses my "Fixit" fixturing system.…
- Downloads
- 696
- Likes
- 531
- Rating
- 5
P
PrintablesMichel Bauer
Ifixit Mako Screwdriver Set Holder with secondary Slot REMIX - Gridfinity
This is a remix of Tactical Grizzly's Ifixit Stand with an extra Slot for the Back cover so to has a dedicated place. I thought the model was perfekt and only wanted a place to store the lid of the IFixit Mako. The extra wall I added…
- Downloads
- 683
- Likes
- 140
- Rating
- 4.79
P
PrintablesRockNLol
iFixit Essentials and Manta Mount for Ikea Skadis
This enables you to store your iFixit Essentials kit on your IKEA Skadis pegboard. V2.0: This is a new version, updated to use the supportless and easier to print Skadis Ultimount, just like DavidsGotWoods Mako Kit. Since it was requested…
- Downloads
- 620
- Likes
- 64
- Rating
- 4.94
P
PrintablesErrADDict
Multiboard iFixit Mount
Combined this model https://www.printables.com/model/498256-ifixit-pro-tech-toolkit with the wastebin mounting system
- Downloads
- 473
- Likes
- 81
- Rating
- 4.25
P
Printablesdaveh_dev
HSW iFixit Mako Driver Kit magnetic mount for Honeycomb Storage Wall OR Skadis Pegboard
I loved the excellent model by @JohnD920 for mounting the iFixit Mako Driver Kit to the Honeycomb Storage wall—but I wanted to be able to (optionally) leave the lid off the kit, and be able to just choose driver bits directly from the…
- Downloads
- 456
- Likes
- 141
- Rating
- 4.67
P
Printablespetrepa
iFixit Mako Gridfinity Holder
I was searching for a Gridfinity holder for my iFixit Mako set, but wanted to keep the original case as I like this very much. This design is also very much inspired by iFixit Mako Screwdriver Set Gridfinity Holder by Tactical Grizzly ,…
- Downloads
- 441
- Likes
- 80
- Rating
- 5
P
Printablesnixkor
iFixit Mako Driver Kit Rugged Box Frame (screw hinges)
iFixit Mako Driver Rugged Box Frame I wanted something with better hinges / latches than the iFixit Mako Driver Kit box frame so remixing it with Rugged Box (Parametric) seemed like an obvious solution. This uses the dimensions from the…
- Downloads
- 441
- Likes
- 128
- Rating
- 4.93
P
PrintablesUltraprecision Technologies
iFixit Manta Under Desk Mount
I use my Manta kit every day, and I wanted to make sure it was always within reach when I needed it. This simple design lets you slide your Manta kit just under your desk, keeping your work surface clean when you don't need it, but always…
- Downloads
- 438
- Likes
- 156
- Rating
- 5
P
Printablespogofcz
Gridfinity iFixit Pro tech tool kit holder
Block is two block deep and 3 blocks wide. Printed with 10% infill and 0.4mm layer height with 0.6mm nozzle. Built on my easy to use template base: https://www.printables.com/model/286722-gridfinity-block-template-easy-to-use-for-fusion-3…
- Downloads
- 430
- Likes
- 82
- Rating
- 5
P
PrintablesGrain
iFixit Manta Faceplate and High Contrast Labels
I was having a hard time reading the existing labels and finding the empty holes to put back the bit I just used, so I made this model that can be printed in white or other bright colour making it easier to find the empty holes. The plan…
- Downloads
- 421
- Likes
- 82
- Rating
- 5
P
Printables3Dimensions
Honeycomb Storage Wall Ifixit Mako Tool Mount Open HSW
Here's a honeycomb storage wall Ifixit Mako 64 piece mount that allows you to put the cover on the back giving you full access to your tools without removal. Requires 2 of the hollow inserts for mounting and supports enabled. I put the…
- Downloads
- 405
- Likes
- 69
- Rating
- 4.67
P
Printablesgeorgag
iFixit Bit Holder
This is a desktop bit holder for iFixit 4 mm bits and bit holder.
- Downloads
- 383
- Likes
- 68
- Rating
- 5
P
PrintablesTactical Grizzly
Upright Ifixit Screwdriver Set Holder - Gridfinity
Makes the Ifixit screwdriver set much more accessible than when stored upright with the lid on, and take up less space than when stored flat & open. There's a large open space in the back for more storage, or to add weight. This is a…
- Downloads
- 368
- Likes
- 81
- Rating
- 4.5
P
Printables3D.Nystad
HSW - iFixit display/shelf
Made this for easy accsess to the tools in the kit. And thinks it looks good on display as well ;)
- Downloads
- 366
- Likes
- 63
- Rating
- 5
P
PrintablesMarMed
iFixit 64 bit driver kit holder - IKEA Skadis Pegboard
Remix to mount to an IKEA Skadis Pegboard Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Notes: Supports needed for pegs Category: Tool Holders & Boxes
- Downloads
- 332
- Likes
- 81
- Rating
- 5
P
PrintablesFrostyTheClownMan
Rugged Case for ES15 + iFixit Mako Kit
I like my ES15, but I found the bit set it came with was sorely lacking. So I decided to combine it with my iFixit Mako bit set. This case adds holders for all of the bits, it also has a small driver handle that can have the ¼" adapter…
- Downloads
- 312
- Likes
- 104
- Rating
- 0
P
PrintablesLukas_B
iFixit Manta Driver Kit box frame
Frame for iFixit Manta Driver Kit. IIt fits very tightly, if it has to be taken out of the housing frequently, it has to be scaled up a little bit. The two frame parts are connected by a sprip of filament. The latch and the bottom part…
- Downloads
- 311
- Likes
- 117
- Rating
- 4.6
P
Printablesmjseabright
Ifixit Manta Case
If you're like me, you don't like the case that the ifixit Manta screwdriver kit comes in. It's a really good screwdriver set, but the lid falls off as it's only held on with magnets. This case has latches so it won't come undone in your…
- Downloads
- 300
- Likes
- 99
- Rating
- 5
P
PrintablesJohnD920
IFixit Mako Driver Kit Holder for Honeycomb storage wall
I wanted to place my Ifixit Mako driver kit to my honeycomb storage wall so I designed this holder.
- Downloads
- 294
- Likes
- 62
- Rating
- 5
P
PrintablesROLS733
HSW | iFixit Mako Screwdriver holder + Tweezer clamps
The holder has three attachment points and is therefore bombproof on the honeycomb wall. Small clips were added to the side where you can store tweezers, spudgers or other small tools. The lid can still be stored at the back. Just print…
- Downloads
- 291
- Likes
- 53
- Rating
- 5
P
PrintablesTactical Grizzly
iFixit Mako Screwdriver Set Gridfinity Holder
There's only one STL. Print two copies normally and two addition copies mirrored in your slicer. Takes up a 3x5 slot area. Corners can be stacked when not in use and they are tall enough to help support adjacent modules. Uses dramatically…
- Downloads
- 283
- Likes
- 44
- Rating
- 5
P
PrintablesEzio
iFixit tweezers tip
Some time ago I broke my iFixit tweezers tip and since i didn't wanted to buy them i made my own based on originals. Very easy print. I printed with 100% infill, 0.12 layer height, with PETG filament.
- Downloads
- 271
- Likes
- 20
- Rating
- 4.6
P
PrintablesMyheg
Replacement part: iFixit Reverse Tweezers Tips
Reverse Tweezer Tip replacement. Won't be as strong as the original, and you will need to thread the plastic with the screw. Worked well with PLA - it does have a bit of flex, but if it breaks it's five minutes to print another. Printed…
- Downloads
- 260
- Likes
- 34
- Rating
- 5
P
Printablesbrass chuckles
Gridfinity Bin for iFixit 54 Bit Driver
Gridfinity-compatible storage tray for iFixit 54 Bit Driver set. Heavily inspired by the storage box/tray that comes with the set, but the 1/4" adapter was moved to make everything fit in 2x4 Gridfinity squares. No magnet holes. I've…
- Downloads
- 251
- Likes
- 47
- Rating
- 5
P
Printablesifixit
iFixit Bit Driver Torque Lever
This little adapter fits snugly against the three flats of the iFixit precision screwdriver handles (Polymer and Aluminum Bit Drivers and Marlin Fixed-Blade). By providing extra wings, higher torque can be achieved for really stubborn…
- Downloads
- 244
- Likes
- 80
- Rating
- 4.86
P
PrintablesDarksideee
HSW IFIXIT Dental Tool holder
Could not find a suitable holder for my IFIXIT dental tools, so i made one myself. Easy to print and with minimal support waste. Still the tiered design allows for easy access of any tool without knocking of the other ones. My recommended…
- Downloads
- 232
- Likes
- 43
- Rating
- 5
P
PrintablesMelSK
iFixit 54 Bit Driver Kit replacement tray
The original tray for the Bit Driver Kit was made out of a flimsy plastic that gets brittle over time so i have designed a printable version to replace it. Update 05/08/2023 After speaking to @tswartz07_941440 it turns out there are 2…
- Downloads
- 230
- Likes
- 52
- Rating
- 4.86
P
Printableswhodidyouthink
Honeycomb Storage Wall iFixit Mako Minimal Mount
A remix of JohnD920's iFixit Mako mount for RostaP's Honeycomb Storage Wall to reduce the amount of plastic used.
- Downloads
- 217
- Likes
- 30
- Rating
- 4.25
P
PrintablesJohnson Martin
Gridfinity iFixit Bin - 2x2x5
Gridfinity bin for holding up to 54 bits and an assortment of other small repair tools. Originally based on @georgag 's bin and modified to fit with the Gridfinity system and hold more tools.
- Downloads
- 217
- Likes
- 32
- Rating
- 0
P
PrintablesThoHilde
Tweezer locks for ifixit Precision Tweezers
Fits perfect on my ifixit tweezer set.
- Downloads
- 215
- Likes
- 67
- Rating
- 4.67
P
PrintablesfdmOperations
iFixit Pro Tech Toolkit Gridfinity Compatible Tray
This tray snugly fits the iFixit Pro Tech Toolkit (Item # IF145-307-4) in a 5x3 gridfinity sized grid.
- Downloads
- 213
- Likes
- 35
- Rating
- 5
P
Printablesswebra
Multiboard Magnetic iFixit Mako Driver Kit Mount (Wall Mount)
A re-implementation of daveh_dev's magnetic mount for the iFixit Mako driver kit using Multiconnect for Multiboard and direct-to-wall compatibility. Like the original, this mount lets you to quickly grab the whole kit or just remove the…
- Downloads
- 212
- Likes
- 44
- Rating
- 4.67
P
Printablesmptrs
iFixit mako bitset holder for Ikea Skadis
Because I'm a T-nuts system fan I had to remix this one. Two mounting holes should be more than enough to keep this one steady on the Skadis. Took this model because it's not a massive print and it looks really nicely finished with the…
- Downloads
- 198
- Likes
- 41
- Rating
- 5
P
PrintablesDoak
Gridfinity iFIXIT Mako Driver 64-bit Kit Adaptor Tray
Essentially a “shoe" that adapts your existing Mako Driver 64-bit kit to Gridfinity. It made more sense to me to keep using the existing layout than design a new thing from scratch. You can leave the lid on, but I prefer to stick that to…
- Downloads
- 197
- Likes
- 37
- Rating
- 5
P
Printablesswebra
Multiboard iFixit Pro Tech Toolkit / Tool Roll Mount (Wall Mount)
A mount for the iFixit Pro Tech Toolkit, with or without the Mako driver kit, using Multiconnect for Multiboard and direct-to-wall compatibility. Variants Full Toolkit: Fits the full toolkit with everything inside of the tool roll.…
- Downloads
- 193
- Likes
- 23
- Rating
- 5
P
PrintablesCollin Ostrowski
LTT to IFixit Adapter
This adapter takes the small 4mm bits from IFixit and adapts them to the ¼" bit size of the LTT screwdriver. It is fairly low torque as the version I have printed will spin inside the ¼" tip of the LTT screwdriver It will print nearly…
- Downloads
- 184
- Likes
- 42
- Rating
- 4.75
P
Printablesdanderson
I fixed it (for ifixit Mako)
NOTE: : Your lid might not fit right unless you modify it. It's not a problem for me because I keep mine in a drawer with the lid off. Also, this print has tight tolerances. Make sure your printer is calibrated. Be advised, I have an…
- Downloads
- 182
- Likes
- 40
- Rating
- 5
P
PrintablesJerry
MiniWare ES15 and iFixit screwdriver + bits - Gridfinity holder
While technically a remix I've re-made the holder from Zach's original template using MachoThick's ES15 model and bit holder design. I've added the iFixit screwdriver sketch from Zach's own models. This will fit standard 4mm bits like the…
- Downloads
- 181
- Likes
- 29
- Rating
- 4.67
P
PrintablesFynnema
spudger, opener and plektron for smartphone repair like ifixit
i have printed these on my ender 3 with some nice PETG in 0.15 layer height
- Downloads
- 173
- Likes
- 7
- Rating
- 0
P
PrintablesRedec
LTT Screwdriver adapter for iFixit Bits
This allows you to use your iFixit bits in your LTT screwdriver. The magnet does go through the plastic base so the bit doesn't fall out.
- Downloads
- 171
- Likes
- 26
- Rating
- 5
P
Printablesgodofal
Thin Ifixit screwdriver extender
Sometimes companies make screws hard to reach. This part extends the Ifixit screwdriver at about the same diameter as the tip. Make sure you print it at the long flat face down, there is a key in the model that should help you find it.…
- Downloads
- 171
- Likes
- 20
- Rating
- 5
P
Printableswallydoggy
iFixit Essential Electronics Toolkit - Gridfinity
Overview: This is a 4x4 Gridfinity holder for an iFixit Essential Electronics Toolkit (item # IF145-348-5). I noticed most iFixit Gridfinity holders did not include a way to keep the original case stored, so I designed one. This is a very…
- Downloads
- 170
- Likes
- 36
- Rating
- 5
P
Printablesteymur
iFixit Manta Holder Skadis Remix
I just added the Skadis Hooks made by Printables user Rod. Will add to that part, too. added three of Rods Delta model, just to be safe, as the Manta is a bit heavier. Just to be on the safe side.
- Downloads
- 167
- Likes
- 35
- Rating
- 5
P
PrintablesPascal
iFixit Mako Skadis holder
Using hooks from https://www.thingiverse.com/thing:2853261 Category: Organization
- Downloads
- 167
- Likes
- 24
- Rating
- 4.8
P
PrintablesOM Hawk
Gridfinity iFixit Moray Driver Holder
I like to save cases and boxes and it's an issue. With this iFixit Moray screwdriver set you can not only save the case that it comes in but also have a Gridfinity adaptation. All you need to do is print the holder and insert the foam…
- Downloads
- 166
- Likes
- 21
- Rating
- 5
P
PrintablesNiggl
iFixit Driver Kit Pegboard Holder
iFixit Driver Kit Pegboard Holder A pegboard holder for iFixit's driver kits "64 Bit" (Nowadays also called "Mako") and "Mahi". Maybe other kits are also compatible, but I only tested those two.. Printing and assembly I printed the model…
- Downloads
- 164
- Likes
- 30
- Rating
- 5
P
PrintablesDylanmo
Gridfinity iFixit (Old) 54 Bit Tool Kit Tray
Created for discontinued tool it (https://www.ifixit.com/News/14199/new-54-bit-tool-kit-from-ifixit).
- Downloads
- 163
- Likes
- 24
- Rating
- 5
P
PrintablesFrostyTheClownMan
LTT Store Driver + iFixit Manta Rugged Case
I have both the iFixit Manta & LTT Store driver, I wanted to keep them together in a way that stacked well with my tools. I made this box to let me keep the original Manta case intact. You will need 6 M3x30 screws. As always, I've…
- Downloads
- 159
- Likes
- 62
- Rating
- 0
P
PrintablesParasitKegel
Gridfinity iFixit Precision Tweezers Bin
Compatibility This bin is compatible with the iFixit Precision Tweezers Set and probably a lot of other tweezers. General It is 1 x 4 x 3 Gridfinity units in size which corresponds to a size of 42 x 168 x 21 mm + rim heigth. The height…
- Downloads
- 155
- Likes
- 29
- Rating
- 5
P
Printables20kev01
iFixit Screwdriver Mount for Ikea Skadis using low Profile T-Clip System
iFixit Screwdriver Mount works for Mako and Mahi. Modified @DavidsGotWood's mount to work with @tchoupshop_82950's low profile T-clips. Download the low profile T-Clips here: Link
- Downloads
- 155
- Likes
- 17
- Rating
- 4.67
P
PrintablesChris Borge
FIXIT bamboo standoffs.
Simple standoffs to orient things using the FIXIT system. Uses 2.7mm bamboo skewers (has a 3mm hole) to adjust height between the base clamp and a cup. The cup holds plasticine or bluetac to secure most things pretty neatly. Designed for…
- Downloads
- 155
- Likes
- 44
- Rating
- 0
P
PrintablesObi
iFixit Mako Lid
This is a replacement lid for the iFixit Mako driver kit. It's my favorite kit and I lost mine awhile ago. Includes screw organizers at the bottom and a magnetic close like the original had. It was designed to use 5x2mm neodymium disc…
- Downloads
- 150
- Likes
- 20
- Rating
- 5
P
PrintablesFroeForge
HSW iFixit Roll Tool Case Holder
Simple HSW mount for the iFixit Pro rollup toolkit storage. Update (11/13/2023): Added a new model that includes a third peg towards the top of the model for stability on the wall. This one will probably require support.
- Downloads
- 150
- Likes
- 24
- Rating
- 5
P
PrintablesJPI
IFixit Mako Holder
Printed standing with support for the insert to the HSW
- Downloads
- 149
- Likes
- 30
- Rating
- 0
P
PrintablesLucas G.
Gridfinity iFixit Manta insert
I am reorganizing my tools drawers with Gridfinity . Needed something to keep iFixit Manta kit from sliding around, so I designed one. Set case does not sit very tight in the insert as I am taking it with me every now an then. Also added…
- Downloads
- 138
- Likes
- 10
- Rating
- 5
P
Printablespetrepa
Gridfinity iFixit Manta Holder
Holder for the iFixit Manta set. Designed in Fusion 360 using this template, Gridfinity block template , but the design ideas are copied from the design by Michel Bauer . A secondary slot for storing the cover for the original casing.…
- Downloads
- 133
- Likes
- 19
- Rating
- 5
P
Printablesprolucker23
iFixit Mako Driver Kit box Split Frame
Added the original latch & my custom pads - renamed files for better distinction to original Added a version with holes (3mm) in hinges UPDATED the hinge again so hopefully it snaps better together had to split it in 2 parts cause my…
- Downloads
- 132
- Likes
- 25
- Rating
- 5
P
PrintablesLittleJoeMuc
iFixit Mako Driver Kit - magnetic skadis holder - remix more Magnets
I love the design of daveh_dev for the Mako Driver Kit holder on skadis, but wiht the magnets I bought, it wasn't holding good enough in my opinion. I changed the position of the magnet rows to align the bits of the kit, and added more.…
- Downloads
- 128
- Likes
- 47
- Rating
- 4.75
P
PrintablesMinus97
IFIXIT tool holder tool stand
This is a simple stand for the IFIXIT tool box. No supports needed. Easy to print! Das ist ein einfacher Ständer für das IFIXIT Werkzeugset. Es werden keine supports benötigt und es ist sehr einfach zu drucken.
- Downloads
- 127
- Likes
- 49
- Rating
- 4.5
P
Printablesrouvenschandl
Gridfinity iFixit Opening Tool holder
Has space for the most important IFixIt tools (or replicas) for opening devices
- Downloads
- 127
- Likes
- 11
- Rating
- 5
P
PrintablesKarlD89
Gridfinity iFixit Precision Electric Screwdriver storage
A quickly modelled storage bin the iFixit precision electric screwdriver
- Downloads
- 126
- Likes
- 11
- Rating
- 5
P
Printableshzzzln
Gridfinity iFixit Mako Gen2 with case (No Magnets)
Original by @Onelostcause - Includes both versions, with and without the original lid in the bottom.
- Downloads
- 125
- Likes
- 16
- Rating
- 5
P
PrintablesMerijn Vandenabeele
iFixit Pro Skadis holder with T-Nuts
Fix your wonderful iFixit Pro toolset to a Skadis pegboard using t-nuts from https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb . I printed this model in PLA with a .4 nozzle and .2 layerheight. I…
- Downloads
- 122
- Likes
- 16
- Rating
- 5
P
PrintablesPascal
iFixit Manta Skadis holder
Using hooks from https://www.thingiverse.com/thing:2853261 Category: Organization
- Downloads
- 121
- Likes
- 18
- Rating
- 4
P
Printablesflo
iFixit iOpener Box
This is a space efficient box for the iFixit iOpener repair kit. Keeps your repairtools neatly orgainzed. I added the iFixit logo to the lid using an svg in the orca-slicer (also included in the 3mf file). The lid just clicks into place.…
- Downloads
- 119
- Likes
- 9
- Rating
- 5
P
Printablesdawidbaczkowski
Tip for Reversed tweezers aka Nylon Tipped Tweezers iFixit
Melted original and decided to print them myself. CF nylon, 0.3mm nozzle, 0.1mm layer hight and fits perfectly.
- Downloads
- 119
- Likes
- 23
- Rating
- 5
P
Printablescopperbricks
Case for iFixit Mako and ES15 Screwdriver
Recently I bought a Miniware ES15 electric screwdriver and decided it'd be really convenient to carry it around with my iFixit manta set because they use the same size bits. I really like the case the iFixit Mako comes with so I modeled…
- Downloads
- 117
- Likes
- 30
- Rating
- 5
P
Printablesthe dying meme
4mm Bit Wrench compatible with IFIXIT Bits
This is an low profile bit wrench I made to screw in a part that was bugging me print time is 14 mins approx I used Prusa slicer and 100% infill. The bit holder part is finicky to have it actually hold the bit snugly you may want to mess…
- Downloads
- 115
- Likes
- 7
- Rating
- 5
P
PrintablesBill Wales
***Deprecated***LTT+iFixit Mod-Case V1 - Now with Gridfinity support*
*****UPDATE 2***** Thanks to @modernespiel for Making a split version of the bottom case that has Gridfinity support. It also has spots for recessed 3x3mm Neodymium magnet in the four corners. Expect my next update to add the magnet holes…
- Downloads
- 114
- Likes
- 25
- Rating
- 3.67
P
PrintablesSøren Nørgaard
iFixit Stand
A stand for the iFixit Pro Tech screwdriver box that does not take up to much space on the desk. Have a small tray in front so that you dont loose your small screws. the one on the image is printed on a Bambu Lab P1P.
- Downloads
- 113
- Likes
- 31
- Rating
- 5
P
PrintablesLiam Meakins
HSW iFixit Manta Mount
This is a mount for the iFixit Manta driver kit to go on the Honeycomb Storage Wall.
- Downloads
- 113
- Likes
- 14
- Rating
- 5
P
PrintablesProfos
Ikea Skadis iFixit Essential/Manta mount
I didn't liked most of the models for the manta kit, as they first take a lot of filament and second mostly don't fit my Prusa Mini. Also there was not really a model for the Essential Kit. As all iFixit hard shells (Essential, Manta and…
- Downloads
- 112
- Likes
- 9
- Rating
- 4.8
P
PrintablesBennet
Ifixit Moray Mount for Ikea Skandis
This is my mount for the I fix it, Murray, precision bedside. The Malte is designed to fit on to the ikea ska dis system. You will need support structures to print it, but I highly recommend using organic support. if you print it please…
- Downloads
- 111
- Likes
- 14
- Rating
- 5
P
PrintablesThorou
Gridfinity iFixit Precision Bit Driver Tray
A shallow tray to store your iFixit precision bit driver in prime position for instant grabification. Pictured is an older revision of the ⅓ height version. For Gridfinity by Zack Freedman .
- Downloads
- 110
- Likes
- 17
- Rating
- 5
P
Printableswesleyac
HSW iFixit Mako Screwdriver holder + Tweezer clamps (No Logo)
Honeycomb Storage Wall Mako driver set holder with tweezer storage. Logo has been removed from original.
- Downloads
- 109
- Likes
- 11
- Rating
- 0
P
Printablesrouvenschandl
iFixit Mako Screwdriver Set / Pro Tech Toolkit Gridfinity Holder FULL FRAME
Ein Gridfinity-basierter Halter für den Mako-Schraubendreher-Satz / Pro Tech Toolkit
- Downloads
- 109
- Likes
- 11
- Rating
- 5
P
PrintablesPaparazziN
iFixit 64 bit driver kit holder (without logo!) for Skådis
A remix of MarMed's iFixit 64 bit driver kit holder but without the logo, as I prefer the clean look. Printer settings 0.6 nozzle (Bondtech CHT), 0.3 Quality profile. Supports enabled (everywhere) Printed with Clas Ohlson PETG but PLA…
- Downloads
- 108
- Likes
- 19
- Rating
- 5
P
Printablesgeneral_flint
Gridfinity Ifixit Pro Toolkit (3x5)
Box for the Ifixit Pro Tech Toolkit, low edged and non-stackable.
- Downloads
- 106
- Likes
- 10
- Rating
- 0
P
PrintablesFreek2211
iFixit Essential holder
iFixit Essential holder for honeycomb storage wall
- Downloads
- 105
- Likes
- 30
- Rating
- 5
P
PrintablesToxværd
IFIXIT Pro Tech Toolkit
NOTE, be careful when using a power drill to screw it in, I slightly cracked mine along a layer line because I overtightened it. not a problem other than it doesn't look perfect. screw it in and leave a little extra and manually use a…
- Downloads
- 105
- Likes
- 16
- Rating
- 5
P
PrintablesMarcus Perhamn
iFixIt Manta Driver Kit box frame
This is my remake of Lukas_B's case for the iFixIt Manta kit. I made the model from scratch, and attatched the Fusion 360 file for others to use. Since I diddn't see the point of the little X-piece inserts from iFixIt's original box for…
- Downloads
- 105
- Likes
- 29
- Rating
- 5
P
PrintablesSenior6588
iFixit Manta Gridfinity
6x5 gridfinity bin to hold the ifixit manta set (including the lid/top). This design allows for easy access to all the bits provided but also recessed enough to allow stacking. The weight of the bits holds it down so grabbing a single…
- Downloads
- 104
- Likes
- 16
- Rating
- 5
P
PrintablesRichard Woelk
Tweezer Tips for iFixit
I broke the tip off my tweezer, so I decided to model my own. Since I had the screw spacing figured out, I decided to try customizing it as well. There's a round set and a wide set to grab an M.2 SSD circuit board.
- Downloads
- 104
- Likes
- 12
- Rating
- 0
P
PrintablesDoombeast13
HSW Ifixit manta holder
This is a test design for an Ifixit manta tool kit holder. Currently the walls are a bit thin and the toolkit sit slightly loose. im working on a new model with thicker walls which should give the tool kit a tighter fit. MK2 was stronger…
- Downloads
- 103
- Likes
- 14
- Rating
- 3
P
PrintablesEwok
iFixit Manta Desk Stand
Desktop stand for the iFixit Manta tool kit. As built it has roughly a 10 degree incline, might be too steep for some but you can adjust by cutting the base at a different angle. Has a storage area on the back side for any loose bits,…
- Downloads
- 103
- Likes
- 34
- Rating
- 5
P
Printablesroomonthethird
IKEA SKADIS - iFixIt Moray Screwdriver Case Holder
Hello! I used the following designs to create a iFixIt Moray holder for the SKADIS pegboard: iFixIt Bitset Holder by Fufus IKEA Skadis Collection (easy print/tight fit) by CSD_Salzburg IKEA Skådis caliper holder by KTP HSW iFixit Moray…
- Downloads
- 103
- Likes
- 9
- Rating
- 4.25
P
PrintablesJaime
iFixit toolholder with gridfinity
I have an iFixit tool set that I got on Amazon a few years back. I wanted a pretty place to display/store the tools and it had to be Gridfinity-compatible so I made this. I printed it with my MK4 using some generic PLA, 10% infill, gyroid…
- Downloads
- 101
- Likes
- 17
- Rating
- 5
P
PrintablesLayerCake
Gridfinity iFixit Mako & Mahi Holder
A Gridfinity holder for both the iFixit Mako and Mahi Kits in their boxes. As the boxes are more than 4U wide I made this double holder to safe 1U instead of adding dead space for a single holder. There are two variants you can print a 9U…
- Downloads
- 100
- Likes
- 24
- Rating
- 5