57 models
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. The boxer configuration with two…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Printing and Assembly The parts…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Printing and Assembly The parts…
Designed by: ericthepoolboy Hardware Kit and Build Support by MakerRx Before overhead valves took over, there was the Flathead V8 - raw, simple, and legendary. This 3D printable scale model brings that piece of history to life with moving…
sherpa micro with: changed filament path to front stronger arm stronger rear housing
This is an Transmission 3 speeds extension for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). It's a complex remix of "1939 Ford Toploader Transmission by skipstitch" ( https://www.thingiverse.com/thing:2940612 ). It…
This is an Intake Manifold remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This design is planned to receive a supercharger soon. Release 24/03/2020 : New IntakeManifoldPulleyV2 (it replace…
This is an Engine Stand extension for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). The mounting holes are already present on the engine block. Print Settings 1 x EngineStandBackLeft : Layer:0.15mm Raft:no Brim:no…
This is a new Timing Cover and the Distributor for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This design is planned to receive a supercharger soon. The assembly of this part is meticulous; the components are…
This is an Oil Pan remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). Features : Gaskets Oil Pan remix (for Dispstick) Oil Pan Starter Flange remix (closed) Oil Pan Disptick Starter enclosure Print Settings 1 x…
This is a Cylinder Head Gasket extension for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). The gasket is glued to the cylinder head. More add-ons…
This is an add-on for Exhaust Headers of the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). Be careful ; ExhaustHeader1Collector and ExhaustHeader2Collector are not the same. Print Settings 1 x ExhaustHeader1Collector :…
Print vertically, tip is 4mm wide. 0.12 layer height. You can also print at .2 and clip the top off for a slightly thicker bit.
This is a Crank Pulley remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This remix only applies to the first version of the motor published by EricThePoolBoy. For the latest version, use the remix (two holes)…
This is Tensioner Pulley extension for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This design is planned to receive a supercharger soon. /!\ Dowload the last release of the Waterpump remix (…
This model is based on the fantastic Gridfinity Bin with Printable Label by Pred . This has quickly become my go-to bin for organizing my hardware. The labels provided by Pred in the original model are a single object. You can print them…
Streamline your tool organization with this tailor-made Flathead Bahco screwdriver holder, designed exclusively for the IKEA Skadis pegboard system. This 3D model is engineered for a precise fit, catering to the Bahco screwdriver series…
Updated version here: The design is inspired by the PBSwiss holder, but I didn't like how big it was and I also don't need the giant screwdrivers often so they went in a drawer. The holders have a space for a 3x6mm magnet - It's not…
This is Waterpumps remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This design is planned to receive a supercharger soon. Release 05/03/2020 : WaterpumpPulley is slightly smaller for then tensioner pulley…
🐟 Mugil cephalus — Flathead Grey Mullet 3D Model The Mugil cephalus, also known as the flathead grey mullet, is a coastal fish found across tropical and subtropical waters worldwide. Known for its streamlined body, blunt head, and…
A rounded washer that can add nice color accents over your panels when using countersunk flathead M4 screws and prevent having to countersink the panels. Can also minimize snagging on bolt heads.
Replica of a now discontinued CAO Flathead Ashtray. Original is slightly off square while mine is not so not an exact copy. Fusion Files included Will upload photos once printed. No Special requirements to print but its pretty large so…
LEGO HotWheels FlatHead Fury
A rough copy of the MX-500 shell. Recommended to use a 0.2mm nozzle, but you should be OK with a 0.4mm. The default orientation is to print the shells on their backs as this minimises the need for supports, but printing them the other way…
I like to split the bolts down the middle for increased strength. Using a flathead with a deep groove allowed me to easily install it in the shed. I'll do the same for the longer bolt too when I have the time. 6/24/25: Uploaded most…
This model is based on the fantastic Gridfinity Bin with Printable Label by Pred . This has quickly become my go-to bin for organizing my hardware. The labels provided by Pred in the original model are a single object. You can print them…
These are redesigned versions of my old holders. I wanted something that was more uniform and looked better being printed. And I wanted them to be easily removed and put back. My old design required me to lift them up before pulling them…
Printed with PETG filament, 0.4mm nozzle, 20% Grid Infill, 2 perimeters, 0.2mm layer height. Requires qty two (2) M3x10 flathead screws, qty two (2) 3030 M3 T-slot nuts, qty one (1) brass bristle ¼ inch pen wire brush with 1/8 inch shank.…
In short I made mount for “Sherpa Micro Flathead” which uses altered gears (filament path). This is a mount for the Dragon Burner but in case you want to make your own Step file is included, here are some references for lazy people like me:
Dummy Diesel V8 engine to placed in batery Original file full motor Author: https://grabcad.com/alex.dd-1 THIS IS A MOCKUP NO ORIGINAL DIMENSIONS For use in the original QC60 battery compartment and similar trucks. I recommend using paper…
Printed mine in PLA at 20% infill and works well. Didn't have the socket head screws for the original design so I modified the “holder” part to work with my button head screws. Non 3D-Printed Parts: 4x M3x15mm 1x M3x10mm 5x Brass Insert…
A replacement flathead bit for Leatherman Skeletool. A bit I designed to replace one that got lost. I recommend printing with 100% infill and using support. I printed it at 0.1 mm layer height in Overture Pro PLA.
direct extruder mount for Tronxy X5SA and Sherpa Micro Flathead: https://www.printables.com/de/model/716367-sherpa-micro-flathead
Ring and M6 flathead screw for the vizor on the Lazer Anverz helmet. Print Settings Printer: Prusa Mini Rafts: Yes Supports: No Resolution: .20 Filament: Basicfil PLA+ Category: Sport & Outdoors
Easy to print screwdriver, prints in one piece.
Changelog: V2 Updated to V2 from parent model. V2.1 Fixed an issue where the filament scrapes against the brass of the base of the PC4-M6 fittings I have. I added a collar around the hole. When the fittings screw in now, they butt up…
I've created this holder, to look like a cooler for great models of @Bootjevaarder: https://www.printables.com/cs/model/379935-4-stroke-flathead-boxer-engine https://www.printables.com/cs/model/144943-constant-mesh-two-speed-gearbox Easy…
Wanted to hang my Wera 932A Slotted 10" Screwdriver with 14mm blade on my Wall Control board. This works with luma's DDD Printable Wall Control System parts.
A printable shell for flathead earbuds suitable for 15.4mm drivers, featuring very large bass tubes
Reaming the holes for the camshaft bearings is almost impossible without something like this. There's a slot down the length of the shaft to hold the sandpaper. I used 240 grit and got a perfect fit in just a few minutes. Print Settings…
A simple flathead nail I use with some of my models. Nothing fancy, use as you wish.
Just a simple washer to turn flathead bolts to socketheads.
A simple handle to use instead of a flathead screwdriver. This valve is on my hot water tank. I use the handle because I'm tired of the screwdriver slipping off the valve while I'm trying to operate it. The handle has some chamfers and…
This adapter/tool makes your life easier. All you need for it is a flathead screwdriver and of course, a 3d printer. Just place it on top of the mount and unscrew it using a screwdriver. It’s a lot faster and a lot easier than using your…
I needed a thumbscrew for two flathead screws to fix a 3D printed scissor adapter. I used freecad to make one out of two involute gears. Its a simple and fast method and it also allows to quickly change sizes using the included freecad…
one file supports may be needed
Remix of RikHenri’s Tapo C200 mounting plate, updated with through‑holes for 4 mm flathead screws. The original model didn’t include full pass‑through holes, so this version adds proper mounting functionality.
Wiha Flathead Holding Screwdriver Gridfinity bin 1x7
I adapted the original so I could mount it flush against a piece of wood instead of a pipe with the screws I had available.
I had a ton of these normal flathead screws which came with my Prusa printer - so I wanted them to use them. I also made it 2mm thicker. the carriers are still usable - I tested it. I used m3*8 mm screws (which are used in every prusa…
I had a ton of these normal flathead screws which came with my Prusa printer - so I wanted them to use them. I used m3*6 mm screws (which are used in every prusa printer)
A simple handle to use instead of a flathead screwdriver. This valve is on my hot water tank. I use the handle because I'm tired of the screwdriver slipping off the valve while I'm trying to operate it. The handle has some chamfers and…
I adapted the original so I could mount it flush against a piece of wood instead of a pipe with the screws I had available.
This is a Crank Pulley remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This remix only applies to the first version of the motor published by EricThePoolBoy. For the latest version, use the remix (two holes)…
This package includes all paid add-ons for the Ford Flathead V8 engine. Rather than purchasing the add-ons separately, this package gives you a 20% discount on the total purchase price of the paid add-ons. For detailed assembly…
