157 models
This modified follower allows for 10 rounds of 22LR to fit in the standard 8 round magazine of the Beretta Bobcat 20x. To install: Remove the pin from the existing follower. The pin has a pointed end. You must push the pin out from the…
Recommended print settings: Material: PLA/PETG Layer Height: 0.10 Infill % : 50 Supports: None Print Orientation: Default as modeled
Follower for disassembling small Ruko lock used in many Danish laundromats. Diameter: 12.8mm Notch depth: 7mm Notch width: 9mm Print upright with a brim to hold it in place. I just printed it in draft 0.3mm layer height.
Basic plug follower to work with cores that have an indent on the back end of the plug. I printed this standing up with a brim, brim needed to be trimmed off and lightly sanded to get good fit in core.
A chassis designed for a custom LFR.
Very simple 3D printing. Good luck with printing and lots of fun with Line Follower. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: No Filament: any any any Category: Model Robots
Replacement follower for Magpul Gen M3 Pmag in .223 Remington / 5.56 NATO. Modeled in Blender, I included the .blend file. If you are looking for the baseplate, @mocobaco has one at https://www.thingiverse.com/thing:2646840 Category:…
Seguidor de Línea desmontable, imprimir cada uno de los componentes y emsamblarlos con tornillos M3. - Esquemático (Placa PCB): El diseño de la placa PCB fue realizado en EasyEDA (online - libre), puedes copiarlo a tus proyectos, se…
WE brand airsoft Glock followers are notorious for breaking - this will replace your broken followers for cheap compared to $3 replacements that break just as easily. Long and short variants for different types of magazines (G17/19 and…
Minor remix of ShortCourse's existing model, adds a simple hole to adjust the follower spring as needed. Inspired by some commercial versions of this design. ShortCourse's existing model: https://www.thingiverse.com/thing:5400861 Print…
Fitting N20 motor mount: https://www.printables.com/de/model/784474-n20-motor-mount/comments/1605707
Updated 11/28/2020 added old style follower. Updated by request: 2/13/2020 increased diameter by 1mm I found out while re-keying a new Schlage lock today that it appears they have changed the cam on the end of the key way and the old…
Replacement follower for Magpul Gen M3 PMAG in .6.5 Grendel. Modeled in Blender, I included the .blend file. Category: Replacement Parts
Plastic follower for CZ 452/455/457 metal 10rnd magazine reduces friction and rattling. Fits magazine on the picture. I don't know if it will fit other 5 or 10 round magazines. Print on the side with supports.
Follower glock G17, G17L, G19, G19X, G26, G34, G45
Glock GBB magazine follower. The regular one is for standard magazines, the "long" is for extended magazine. Split during the longest axis and glue together using super-glue. Use two bits of filament to align the two parts. Use nylon for…
THE CIRCUIT DIAGRAM AND CODE ARE HERE: https://github.com/aslam-Hossain-YT/Fast-Line-Follower-Robot
I made this because I messed up my follower for my Hexmag, and for some reason, no one's made the design yet. I made it for the 5.56/.223 magazines. I have tested it and works great. The magazine ejects properly and the bolt catch also…
Here are three sets of followers designed with Locksport in mind. One set is great for gutting on camera and one is just generally good for lock assembly/disassembly. There is also a set of segmented followers for dual Euro cylinders. The…
Hanger for the primer follower on the Dillon RL1100. I assume this will fit other models but I haven't tested it. The inside diameter of the clamp is 14.2 mm. Let me know if you have any feedback. Filament: eSUN PLA
Made this to fix my Bluebox AK74 midcap mags that weren't feeding, after I found the followers were the issue. Fixed all my issues, just won't feed the last 2 BBs. Should fit in any midcap. Print as fine as possible, tolerances aren't…
Hi-Capa/2011 Magazine follower, should fit all Hi-capa magazines. I have so far tested it with a standard TM Hi-Capa magazine, and it worked fine. Print it laying down with the “teeth” facing up. Supports required.
Convert your Gen 3 PMAG into a 458 SOCOM* mag Replacement follower for Magpul Gen M3 Pmag in 458SOCOM. Modeled in Blender, I included the .blend file. PLEASE NOTE: *This follower will only support cartridge overall length of 2.120 inches.…
One of the many version of CZ 75 follower for magazines. This version is copy of CZ 75 P-01 Ω original magazine follower (nr. 40 from manual). Product was tested with PETG and it works very well. Best option would be ABS ( I think…
Podavač do jednořadého zásobníku Glock 43, oranžový pro lepší viditelnost. Tisknout v poloze položené na horní plošce. Tisknuto Prusament PETG, 0,4mm tryska 0,2mm vrstva, organické podpěry. Na finálním výtisku může být pro hladký chod…
Duplicated the Ruger 22/45 magazine follower that works in the MKII, MKIII and MKIV models. I print it with supports, and the angled face on the print bed. If you are looking for the base plates, the MKII and MKIII are here , and the MKIV…
Model of the follower for the interim magazines (CZ75 to CZ75 B), as with mine the slide stop didn't engage
458 Socom Follower for Magpul Gen M3 PMAG. REQUIRES MAGAZINE MODIFICATION -SEE PHOTOS. This follower is designed to retain the anti-rock nature of the PMAG while allowing for full length 458 SOCOM cartridges. The internal rib inside the…
This is a pin for the mag follower of a tx22, I used the Pin from the 16 round mag to get the measurements. Functions well, printed on a bambu labs printer with .08 resolution.
V3: Less likely to get stuck on the connection of 50rd magazines Flat-head magazine follower for Airsoft ONLY! Glock and AAP-01
Cronometro automático para robots seguidores de línea desarrollado con ESP32-C3 super mini C3, sensor óptico E18-D80NK, pantalla oled de 0.96" y modulo de carga TP4056 para batería lipo 1S 300mAh. Especificaciones El cronometro necesita…
***This is an updated version of the original which functioned perfectly in testing at the shop with dummy ammo, but failed to lock the magazine back in live fire. The changes are small enough that I've not updated the photos, but the Mk2…
This is a project of line follower robot , You can download it and follow the tutorial to make it yourself. Dont hesitate to subscribe to my channel for more videos in the future.
Magpul PMAG magazine follower model for Glock. Dimensioned and transferred by me to fusion 360.
2011 competition style follower to add plus one. Does NOT lock back.
EN: One of the guide hooks on grandma's fridge has broken due to age (or grandma's strength :D). So a replacement part was needed. This is a guide used for follower hinges on built-in refrigerators behind furniture doors. They are largely…
This is a little stand for a phone or a device of your choosing that will use 2 Ultrasonic Sensors to try and follow you. It is inspired by this project:…
For the best looking result you can use 2 filament colors. Pause print at a certain layer to swap filament if you dont have a dual extruder. You can also adjust to size of pacman and the follower to your liking.
This magazine follower gives the King Arms or Air Venturi airsoft M1 Carbine a bolt stop feature after the last round is fired. The stock airsoft gun does not have a bolt lock on the last round. This follower also has a much larger grip…
Welcome! We are revisiting our first project, “ DIY Youtube Subscribe ” with a newer, better version! If you're looking for a way to display all your social media followers information in one devices this project is for you! The project…
This is a replacement magazine follower for the Ruger Mark IV. I created this after noticing that the stock mag can almost allow for an 11th round to be loaded and seeing that the only thing stopping it from working was the spring…
Introducing Eyeless-Falcon Eyeless-Falcon is designed and engineered to be efficient and fast but at the same time durable and with room for improvement, this long blind, despite looking slow and suboptimal, delivers effective results in…
The original MTW midcaps tend to hold onto one bb that they will not release, making it look like you still have bbs in your magazine. This extended follower makes sure that your magazine will eject the last bb and still actuate the stop…
Follower - for Talon Springs - Sure.t Nerf Mod Talon Magazine A follower for standard Talon springs for the nice combination mod by Astropulse Sure.t Nerf Mod Talon Mag - Fully Printable - Quick Assemble/Disassemble I shortened the…
Standard mag follower for Canik TP9 / Rival / TTI
There is this small part in the ASG Shadow2/CZ 75 airsoft magazine, that holds a plastic cap via a little fragile detent that always brakes. It did to me and my friend on multiple magazines. So I decided to make a spare part. Hope you…
Spare part followers for the CZ 50 pistol magazine. I used it as a replacement for the original sheet metal follower because the slide stop did not work. Print from PETG, ABS or ASA Supports are necessary, but only minimally, see g-code.
This adapter (coupler) allows you to connect a Lego Technic 56x28 ZR Wheel (or any compatible Lego Technic wheel) to a TT DC gearbox motor (shaft Ø 5.4 mm). The design provides a secure friction fit, holding the wheel firmly in place…
Please refer to the manual at the link below! [ROBOTIS OMX Manual] This model is based on the original work from https://github.com/ROBOTIS-GIT/open_manipulator by ROBOTIS, which is licensed under the Apache License 2.0.
Volquartsen Magazine Follower Button for Ruger Mark 1, 2, 3, 4 Pistols. Dimensioned and transferred by me to fusion 360.
I made the small tab in front .5mm larger to make the magazine easier to load. Super simple little fix for a worn-out follower or even an ease-of-use upgrade. Bonus points if you print it in a bright color that you can see through the…
An Improved magazine follower for the KWC Colt M1911 magazine. -Easier to grab with gloves as you can see in the last image -Needs just some sanding on the "bolt-catch pin" (I don't know how to call it properly) I recommend 100% infilll…
Intended as a drop-in replacement magazine follower for Anschütz 1827F model rifles. Recommendations: Printing in plastics rated for outdoor use As a part under stress, use higher infill percentages.
Ruger Mark IV magazine follower. Dimensioned and transferred by me to fusion 360.
I created this for my friend, its a work in progress. I included the Fusion 360 files.
Just a followup to an earlier design for those who need the old style follower.
This is a printable follower for HK G3 mag. This allows you to have one more 922r compliance part. USA is clearly visible on the side. After printing dill out the hole that is filled with supports with a 2mm or 5/64" drill bit. Insert the…
just testing a print for a shorter follower to increase capacity. UPDATE After printing, the proof of concept does work. You are able to increase capacity of the magazine by 1 round. But it will be impossible without a total redesign to…
Fallout new vegas Arcade Gannon Followers of the Apocalypse costume cosplay part/prop PLEASE CHANGE SIZE ACCORDINGLY TO YOUR COSTUME!!!
I designed these for use with Taylor Freelance basepads which can have a little bit of issues with the stock Glock followers, but they work with stock Glock .40 S&W magazines and baseplates as well. Printed in Sunlu PLA+.
22-Apr-2021: Added version for use with drum magazine spring, requires some cuts to the shell. Replica of a stock follower. IF you want it in a different color or something I guess.
This is a replacement follower for the Roundhouse. Drop-in replacement, minimal modding. In exchange, you gain an extra 10 rounds. To use, trim the posts to roughly 18 mm from the front of the shell ( the follower should sit flush if…
I was having inconsistent last dart feeding with the mag follower failing to push the head of the dart into the lifter, so I moved the space for the drum spring in the follower back so it would properly push darts all the way through.…
Podvozek pro robota sledující černou čáru.
I printed it in PETG but you can print it and PLA
Magazine follower for High Standard Citation 22lr pistol Print in the orientation in the file. Should work with any material. Needs some sanding to be smooth. Photos show comparison with the original. Print Settings Printer: Printo3D i3…
Many photographers would like to take a picture of night sky object e.g. Andromeda galaxy or some colorful Nebulas. To achieve this goal we need to take long exposure photo. To eliminate movement of the sky the camera must be turning the…
This is a sleeved tight fit cover for the Mbot sensor to protect it from damage
4/14/25 Update: Added STL per request. Smoothed out a lot of the sharp edges in part D2 for the E18 rubber band pistol. Modified part slightly to allow the part to be printed on flat side without any support. Don't forget to set xy…
Hi, I make easy line follower. Look at this video: https://www.youtube.com/watch?v=GyyZGXJei5k&ab\_channel=Va%C5%A1Ali All parts are in files. For back wheel you can use ball and socket, but you must scale it for yourself in meshmixer, or…
A follower for a KWA-style P226/M226 magazine. I used PLA, but PETG would be a better choice. Recommended Print Settings Material Nozzle Layer Height Strength Supports PETG 0.4mm 0.1mm 100% infill Yes
A line-following robot assembled with a Pololu Motor, an Arduino Nano, and a caster wheel.
i used 2x geared hobby motors, L296N Hbridge, arduino nano, 2x IR sensors and a 10mm bearing castor i found. i might add a modeled castor for the 10mm bearing. will need hot glue.
A shorter follower for the Nerf Titan Mega Magazine to make it actually feed correctly. Remix of https://www.thingiverse.com/thing:4563235.
Magazine follower for CZ75 and it's variants, follower is the same for magazines in 9mm Luger and .40SW, printed without supports. Changelog: 5. 7. 2026 Description modified
This modified magazine follower for the FNC 80, adopted as Automatkarbin 5 by the Swedish Armed Forces, allow for maximum capacity and bolt hold open on an empty magazine. Source code (.stp & .3dm) is also provided, should you want to…
Improved follower for the Battleaxe 150 rnd Polymer mags, with design similar to the PTS mags! The original follower in the Battleaxe magazines did not feed properly, so I designed these to help with that. I've taken much inspiration from…
This follower stand was designed to hold Pro-Lok style followers, or followers modeled off of the Pro-Lok sizes. Such as these: Locksport-Specific Followers Print one stand to hold a set of followers. Want to hold more? Print another…
These robot is in charge of making the solar panel always face the light. It's fully automatic and also offers the possibility to control it through a phone app. It also has a LCD to display voltage and you can also see it in the app.…
Se me rompió el empujador de uno de mis cartuchos de escopeta de marca golden eagle y diseñe un repuesto en tinkercad tomando las medidas del original. Recomiendo imprimirlo con una altura de capa baja y macizo. Seguramente se pueda…
The upgraded follower from Silvermutter's Sure.T Mag remix modified for conventional springs. The cutout stops the follower from spinning out when using a normal steel spring by using the groove used for the drum spring as a guide.…
Plug follower for lock re-pinning. Recreated from a Sparrows follower for a picker who needed one with a quickness.
This is a follower that works with a dutch style DIY cheese press. Update: I just added a 4.5" mold version in addition to the original 6" It should work with most any mold, but it has cutouts to exactly fit this cheap mold on Amazon. The…
Parametric Tap Follower Required Parts: TapFollower_metric_point.stl (1x) TapFollower_metric_hollowpoint.stl (1x) TapFollower_metric_tube_metal.stl (1x) Spring (1x) hex screw M3x6mm (1x) Remarks: I made the tap follower on the lathe. I…
Replacement Nerf magazine follower. I bought some generic mags that jam up because the follower was too small. So I designed this replacement. I did supports only for the ribs, but since those aren't structural you may get away with no…
A unique 3D printable creation — this Cam and Follower Demo, Print in Place, Pear Shaped Cam, Vertical Follower Mechanism Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
This follower replaces the OEM follower in promag sig-compatible p365 magazines. This follower actually works, where as the OEM one jams and tilts. I can't believe promag released theirs to production as it totally doesn't work and…
Magazine follower and bottom magazine spring holder for airsoft Luger P08 made by KWC. Both parts were designed for 6mm plastic bb version and i suspect they will not fit 4,5mm steel bb gun. Due to low tolerances the spring holder might…
This is an Organizer Tray for the Ford “Pinto” and “Lima” Series engines in order to organize the Hydraulic Lash Adjusters and Cam Followers in your Cylinder Head. I made this to be a fairly loose tolerances to allow for fitting. There is…
A plug follower with tabs to fit properly in an Assa 700 plug. The opposite end has a groove for easy pinning. Also includes a C-clip to replace the original metal retaining clip. No special print settings, brim recommended for the…
Thank you very much for my FIRST FOLLOWER !! This is special reward for you. THANK YOU VERY MUCH !! And conclusion : DOWNLOAD (and like) 3D print ENJOY !! P.S. - IMPORTANT : You can help me by download and like, but unfortunately, these…
A simple follower design. Use it as a spare part, or to change the color of the follower to be more visible in use. The model is already oriented for optimal printing, resist your urge to turn it around.
Three follower sizes are included: 14.06 x 70 mm 12.56 x 60 mm 10.02 x 50 mm Print these sequentially in spiral vase mode to make them hollow. Hollow followers conveniently nest for compact storage, fit over many plugs’ rearward…
Podvozek pro robota raspberryPi sledující černou čáru pomocí webkamery.
Replacement follower for talon magazines that provides last round bolt hold open for spring powered half dart blasters. Works exactly the same as Distinct21's straight talon follower. (https://www.thingiverse.com/thing:5318848)
Launched the original magazine follower into the depths of hell, designed another in case i decide to put another into orbit.
This is a Roblox 100k Award I originally designed for JackSucksAtLife but never got round to sending it to him. This should be a 1:1 scale of the real one!
Follower for wider magazine springs for the printable angled talon magazine from Taffert Designs removed the recess at the bottom of the follower to use a wider mag spring. The file is already pre-oriented. My print settings for PLA:…
