Four (4) letter Words - Love
scaleable and easy to print
Print approx. €7.28–€8.90 excl. taxPreliminary estimate for one variant
- Downloads
- 949
- Likes
- 181
- Rating
- 5
1,813 models
scaleable and easy to print
Print approx. €7.28–€8.90 excl. taxPreliminary estimate for one variant
It is a foldable four wins. the display can be plugged together and glued witTangit PVC-U If necessary.
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Fouga Magister Here is the first aircaft a the set : the famous fighter of the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Last minute print for the year ;) Set to 3mm height scaled to 70% in slicer (effective height 2.1mm) 100% infill Octagram Spiral has a nice effect on the top surface! I printed it in PETG, because I had no PLA in green color…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
Fourth Wing Keychain
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
My daughter struggles with all the loose ink pen cartridges in her bag, so I designed a compact storing solution for them. Use an M3 screw (12mm max length) and two m3 serrated lock washers to screw the 3 parts together. Align the cap…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
Designed to hold a Lamy Lx or a Lamy Safari fountain pen and a Waterman ink bottle. Print instructions Easy to print, no supports required.
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
Carved Egg with 4 Saints.
Print approx. €5.74–€7.01 excl. taxPreliminary estimate for one variant
Monument to Founders of Kyiv Figures Depicted The legendary siblings: Kyi , Shchek , Khoryv , and their sister Lybid . (Kyiv is named after the eldest brother, Kyi). Official Name Pamiatnyi znak na chest zasnuvannia mista Kyieva…
Print approx. €11.98–€14.64 excl. taxPreliminary estimate for one variant
Hi I built my Core One before @ooishoo published their screw organiser but it would have saved a lot of effort. So for the INDX FE build I was looking for an equivelent model, I made Core One INDX Conversion Kit Screw Organizer (for…
Print approx. €2.68–€3.27 excl. taxPreliminary estimate for one variant
Wall art: Butterfly and lily (four colours)
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
As a kid we made this with a matchbox and some cotton and ketchup.. This one is fancier ;) It consists of 3 parts: coffin and lid printed in 1 go. An inlay cushion is optional (works best in white) Works on my printer (MK4S) Love to see…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Print it with variable heights of layers - the upper parts of tubes max 0.2 mm. The rest of the model can be printed at 0.3. I recommend to use PETG certified to be in contact with food. Build supports only under the tubes, not inside.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for PETGSource material: PET
Largest base that can be printed on a Prusa MK4. Generated effortlessly thanks to @TheoBr24 's script. First layer takes ~70 min. The matrix is: [[1,1],[1,1,1],[1,1],[1,1,1]] Check out my collection for more fountain parts: Modular…
Print approx. €13.25–€16.20 excl. taxPreliminary estimate for one variant
Set of four coasters with a rose motif (two colours)
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
Cats survival instinct makes these furry companions tend to drink water from above the ground level to avoid poisoning or bacteria infection. This little stand will help your pets keep their instincts intact and also let the spilled water…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
240x30x3mm 240x20x3mm 200x30x3mm 200x20x3mm
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
OPTIMIZED FOR SINGLE AMS OR FOR THOSE THAT WANT TO USE LESS COLORS Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Charcoal Black…
Print approx. €8.29–€10.13 excl. taxPreliminary estimate for one variant
Wall art, coaster: Sunrise (four colours)
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
The little black piece that attaches the pump to the flower, in the this Catit Flower Cat Water Fountain We lots one of ours (I think I accidentally threw it out?), so I used my caliper and fusion 360 to model a new one. Works great.…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Having to work with different CAN dongles and devices with a CAN interface it is quite common, that I needed to connect many of them to the same CAN bus. Many of those have Sub-D as a interface. But often they are not the right sex (you…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Designed to fit our drinking fountain, Petkit Eversweet Smart II, and to protect the top lid from being teared off by our cats. For efficient protection, it is suggested to print the model twice and place the two locks at opposite ends of…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for PETGSource material: PET
This little stamp is easy to put together after you print it. The bedded .3mf shows the total # of each part you need to print. Materials Main body and wheels - I used PETG, but PLA or ABS would be fine also. Number bands - I used Flex…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement part for the mounting blade of a Xiaomi Pet Water Fountain. This is the part with the pump attached, screwed to the drinking dish. The original contacts corroded and stopped working after a year of use. Instead of…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
Spare part for a trumpet-shaped ornamental fountain diffuser. Includes a threaded element as the fixing accessory. I needed it, so I redesigned it with some improvements. I love solving problems with 3D printing.
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Some party fire fountains are sold together with holder but some of them not. This model is designed as a substitute for the missing (original) fountain holder. Fountain diameter 14.5 mm and above, bottle neck 26 mm and above. Print…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
my first attempt at creating something with tinkercad. print with supports as the tip of the pen is floating
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
I have combined the best features (in my opinion) of three previous remixes of the Bambu Lab spool. I started with the refactored “Bambu X1 Re-Usable Spool” as a base, then added the best features of the “Improved Bambu Lab Reusable Spool…
It's like a desktop zen rock garden, but with water! https://youtu.be/dAKaOwgOqy0 Printing All parts can be printed without supports. Use a brim if you have bed adhesion or curling issues. Print the base with extra perimeters and a high…
I love everything about the Dummy 13. I am an official fanboy. So when I discovered about the Dummy 13, I decided to build expansion kits for this awesome model. I will not say my models are an upgrade kit because the Dummy 13 is the OG.…
I wanted to cool down my pool water overnight and have a waterfall for fun (and water sound :)) during the day or night. I wanted to create a pool fountain that satisfies the following: can easily be plugged into an existing pump hose…
🔥 Cover up that boring lighter! 🔥 Always have a flame on hand with four different styles to match your vibe or your mood! If you don't want to add a lighter to your janitor-sized wad of keys, then I have just the thing for you! I have…
Tour eiffel d'environ 30cm en quatre pièces. Imprimé avec un pla gold de clorfabb en couche de 0.2mm Eiffel tower scaled to 30 cm and simply divided in four parts.
Bring the mighty Tairn to life with this Funko-inspired dragon figurine from Rebecca Yarros’ Fourth Wing. Designed in an adorable yet fierce style, this collectible features Tairn’s iconic dark scales, golden details, and powerful wings.…
New junction box with 4 inputs. The old models had only three and two openings. Two openings are located on one side (see the pictures). This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features four inputs…
There are three variants of this bookmark; one .3mf file for printing with an AMS/Multimaterial system, one with Andarna raised up, allowing for a color-swap, and one with Andarna cut-out for a single-color only print. Tairn's tail can be…
Overview OpenSCAD project to create a cage that fits in 3 5.25" drive bays and holds 4 3.5" hard drives using rails. Optionally supports a fan shroud to provide additional airflow to the drives. You need to print: 1 cage-cage.stl 8…
I designed this basic Fountain that can be screwed on the ejection hole of your Intex swimming pool... It is working great for me at the moment. I printed it in ABS but PETG or PLA would work just fine
These are a few fundamental Sashiko templates that I use for visible mending. Use a water washable marker (eg Crayola water washable marker) or heat erased pen (eg Pilot Frixion) to mark the lines onto your fabric or garment. I have also…
Print just as you would a normal benchy, just with four different colors. In your slicer you can change the colors to whatever you want in the filament section. The Benchy_2 file adds 4 squares of each color with labels so you know what…
🐾 Four Cats Wall Decoration Bring a touch of playful charm to your home with this silhouette-style wall art featuring four whimsical cats sitting side by side. Each feline has its own personality — from curious tails to expressive eyes —…
Fourth wing dragon earrings I designed. .2mm Nozzle needed for detail of the second dragon. Print pauses so the filament can be swapped out manually. I also printed this on the rainbow PEY plate so the back can be nice and sparkly too.…
Imán personalizado de los dragones de la protagonista de Alas de Sangre de Rebecca Yarros. Se necesitan 3 imanes de 8mmX1mm que están posicionados uno en cada ala y uno en la terminación de la cola del dragón. Diseño realizado a partir de…
Just adapted the four arm mod to the Type-F frame. It also uses my pinned clavicle mod.
This base has 12mm taller outer walls and a 6mm deeper basin. Add stackable spacers to raise sections of of the fountain for more vertically interesting layouts. https://youtu.be/dAKaOwgOqy0 https://youtu.be/3PsxrwF2fdY Printing All parts…
I have fond childhood memories of eating Bomb Pops with my family at our Fourth of July celebrations. I hope these strike up a warm and fuzzy nostalgic feeling for you as well. The earrings on the left are the standard size model and…
Here's a Power 4 game with spiral pieces that I designed in Fusion 360 (step and f3d files supplied). The base is magnetized to the board. Tip 1. I suggest you print the tray test piece and a piece to check tolerances and set your…
Show off your favorite pens while keeping them within reach! This is a 4x2x3 Gridfinity display case for 4 fountain pens. It also works for ballpoint pens, pencils, small screwdrivers, and similar implements. If you need a smaller case,…
Four leaf clover keychain to celebrate St. Patrick's day. Scale however you wish.
This modern holder is ideal for makeup brushes, as well as pens, brushes, and other office supplies. It's versatile, making it ideal for a variety of uses. With its four compartments, it offers plenty of space for your essentials. The…
This is my solution for a splash Free Water wheel for 3dprintys fountain. Print the holder and wheel with supports. They are easy to remove.
An artistic fountain. This model was NOT created with any use of AI. It is designed to print without supports - assuming good bridging on your printer. If you collect or download, please "Like". This one requires a large printer if…
This is a remix of the Splash guard for 3D Printy's Modular Desktop Fountain . I noticed that when water splashed onto the original splash guard, the water would trickle down the splash guard, between the guard and the base, and outside…
Hi, this is a pool fountain you can plug into your pool outlet. You can change nozzles as you want, thread is M30x3 Video: Note #1: It is ment to plug into outlet hole with plastic that is left when outlet guard breaks of sun. Note #2:…
This helps to make the waterflow a bit stronger and have less water running just along the sides. It should fit tight, so there is no glue needed - and so they are changeable if you want another color
This model is compatible with the lego system.
Update 25.06.2023: 3 models added I also had tried different cutouts in order to save some filemant. Therefore I had created three different models: The first one has larger cutouts for faster to printing (3 hours instead of 4). It has…
Turn your faucet into a water fountain by just putting this under to change the water flow. See more at: Instagram: @3DBrooklyn Facebook: 3DBrooklyn Category: Bathroom
its a four pin connector used to connect four honey comb pads
This is a 3D modeled body cap for the Micro Four Thirds Platform. This design features a rotation stop so you cannot over turn the cap. There is also a position marker on the front of the lens cap, like the genuine body caps.
Les parties ont été assemblées avec de la colle PVC pour le tuyau, coude et la rallonge (la rallonge est en option selon la hauteur que vous voulez) (Mettre un peu de scotch d'électricien/chatertone pour que le tuyau s'emboite bien dans…
These files are intended for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. When downloading, do not forget that you do not need to click Download All, because in…
Straightforward - just print and press-fit the sides into the base.
This is an accent cap to put on top of the Plateau. I felt it looked really nice with a different color
This is a model for a bog-standard 4-inch outdoor electrical junction box. It should work great for things like motion-sensing lights (what I'm personally using it for) overhead lighting fixtures, and whatever else you use round…
COBOT: Four servo legs and distance sensor robot I present my latest project, COBOT, a robot that can move thanks to 4 servo motors and get the distance to obstacles with the HC-SR04 distance sensor. This is an ongoing project I have made…
v4 foundation is confirmed compatible with OEM baseplates. This foundation piece resolves a number of issues identified with other foundation pieces I've seen on this site, mainly: tile spacing, proper hex shape, compatibility with OEM…
UPDATE : [May 14, 2024] Added STEP files. NOTE : This set of prints is now complete, with the sizes and dates added as follows : 05/18/22: #4,#6,#8,M2,M3,M4 05/10/22 : #10, M5 05/19/22 : 1/4",M6 05/10/22 : 5/16", M8 05/19/22 : 3/8",M10…
I have devices that like to drain batteries and then suffer leakage, (and one AAA device in particular), so I like to keep the batteries outside the device. Here's a case aiming for minimal size and reduced material, while maintaining…
Just a pack of four non-traditional garden gnomes . You can scale them up as you want, but i do not recommend significantly reducing the size, as this could lead to errors in wall thickness. My print settings(PLA): 0.16mm layers, 2 walls,…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
This is an insert / organizer for Terraforming Mars: Ares Expedition, along with the Discovery, Foundations, and Crisis expansions, in the larger Kickstarter expansion box (note: this does not fit in the retail box). It has no lid lift,…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
This is my take on TI4 organization including Prophecy of Kings. As with all my inserts, my goal is to minimize setup and teardown as much as possible while keeping the contents snug and protected from jostling. All files were printed…
These files are intended for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. When downloading, do not forget that you do not need to click Download All, because in…
🔵 Flexible Caterpillar 🔵 I created 4 versions (8,10,12,14) Versions 8 and 14 are in the video and picture. Number means the number of parts from which it is formed. I do not recommend TXT for this print . PEI is sure that it model will…
Just a simple hex tile people can print to honour Sanjay, one of the co founders of E3D who passed away on 11/27/21. Assets include Fusion360 and STEP files should anyone wish to modify to fit a hex tile pattern they already use. Gcode…
This is a replica of the four piston bleed block that TRP sells. It is intended to be used with TRP DH-R Evo and TRP Trail Evo brakes but may work with Shimano four piston brakes as well since they use the same pads. Printing Instructions…
Remixed the great Modular Desktop Fountain by 3D Printy so that both the plateau and pipe can be run off of a single pump. Changes to the original: Split Plateau Fountain: Splits a single pump source into two outlets, one for the standard…
Basically, I needed a fountain for a broken outdoor fixture and there really weren't any that you could get at the store. So, enter 3d printing. I searched the web for an already made fountain, but that didn't work. I found this little…
Congratulations, you've found a four-leaf clover! 🥳 Two STL versions, with a groove along the contour of each leaf and without. Three profiles, the first two are the same STL, in the first profile the fuzzy skin is enabled. Easy to print,…
Larger bases for upcomming addons :-). Print them the same way as the original. (I fixed one minor issue with the outer that overhang that the original design has. The chamfer is 0.2 mm to small there, resulting an in very small 90…
I've been a fan of the Singapore Merlion since I served a mission for my Church in there. So I knew I'd need to add it to my modular fountain. I basically took the system for the tower fountain and adapted it to this, but I had to rotate…
I have way too many fountain pens. I like to have them on the desk and now I have a way to safe some space. There are different versions you can print.
Wishing you good work and fun I would be happy to receive feedback and photos of the make. Thanks
This is a remix on 3D printy's Desktop Fountain. My fountain is using all of 3D printy's original models except the splash guard. The “splash guard with no leaks” is willsides which I used a dremmel to cut out the wire hole. This remix…
16Nov2024 - Uploaded V2 model which has a shorter front wall and deeper cut to the rear with a larger radii up to the top. This was created to provide a splash guard to the PETLIBRO DockStream pet water fountain in order to prevent water…
Models for the two main dragons Tairn and Andarna in The Empyrean series of books, the first of which is Fourth Wing. There are 2 versions of both dragons, with and without a minny dragon cutout in the middle. Tairn has his morningstar…
This is an improvement over https://www.printables.com/model/348815-fountain-pen-version-2 . I lengthened the cap slightly to leave more room for the nib and I made the section more sturdy. Layer Height: 0.2 Infill: 20% No supports…
Updated and improved Single Color and Multimaterial/Multicolor version available on my Gumroad Store and my Printables Club . Flying monsters or summons can land on top of the water. Overlay tile replacement for the board game Gloomhaven.…
Show off your favorite pens while keeping them within reach! This is a 4x1x3 Gridfinity display case for 2 fountain pens. It also works for ballpoint pens, pencils, small screwdrivers, and similar implements. If you need a larger case,…
A backpack for arms made for the Atelidae.
It's a story. A few weeks ago we were in Paris and everywhere you could buy expensive models of the Eiffel Tower and some even flashed. So I promised the family that I would print it for them and it would be lit. :) Since I used the add…
Indian Four nr 439 year 1939. Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
A curvy designed bowl with four compartments. Ideal for snacks... The standard dimensions are 200mm x 65mm. It can be scaled as desired. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+…
Someone i know wanted to print the version i remixed it from, but the bowl and cylinder itself was too tall for her purpose (chickens that are currently under a heat lamp), they would potentially drown because of the water level. So i…
31.07.24 Update: thicker stem (4 walls at 100% infill) // dickerer Stiel Update: the new nozzle (18cm) looks like a flower :) Nozzle for solar fountain with 8mm outlet (mini fountain for balcony, terrace or similar). My wife wanted a…
bague de foulard https://www.thingiverse.com/thing:1019036