443 models
This print can be used to display award medals on a wall. It consists of two modular parts, a frame and a plate. There are two versions of each. The frame has both a simple version and a version with mounting slots to simplify attaching…
===Update=== Stand added ===Update=== Instax Mini Magnetic Fridge Frames, with an overall thickness of only 3mm. I recomend the textured sheet for a shiny surface finish. The frames can be equipped with magnets (6mm x 3mm x 1.5mm) to…
Automatic Z calibration on Voron 0.2! This is a mount for a nozzle wiper and touch microswitch that attaches to the Kirigami bed frame on Voron 0.2 printers. It allows to use the Klipper Z calibration plugin with 0.2 printers. The nozzle…
printed a few others from around the place, but as ever, couldn't find one that was just right, so we designed our own. two versions, one with a two mm gap, which wobbles a little, one with a "spring" to make things wobble less. think…
Hi, I designed this bottle holder to keep my large 1.5l Camelbak bottles in reach, without the danger of throwing them of my bedside table at night. It fits 1.5l bottles up to 100mm and large cups that are at least 100mm. Bottles that are…
Bei Bildern, die in exakt gleicher Höhe hängen sollen oder Bildern, die mit 2 Aufhängern aufliegen sollen, hilft das kleine Gadget, sie exakt waagerecht auszurichten. Nicht immer läuft der Bohrer ja exakt dort in die Wand, wo man möchte…
Extension to the awesome Gridfinity project by Zack Freedman. This model allows you to mount a Gridfinity baseplate frame to your Ikea Skadis. If you have trouble with bed adhesion for the pegs, use a brim to keep them in place.…
4 ks Dekorativní rámečky Jelen Vlk Medvěd Šestihranné
It has 2 versions, one with a slot for customizable plates and one without. The dimensions of the customizable plates are 42x10x1mm. You can make signs in these dimensions yourself, if you have no experience there are many tutorials, e.g.…
This is amazing model was made by rndmframes_printing and the licensing allows sharing with attribution so I wanted to make sure the prusaprinters.org visitors didn't miss out on it by re-uploading! Original link here:…
I love making armor and mods for the Dummy 13 but have felt that the shoulders could be wider to give it a more “Heroic” physique. I became especially inspired when I realized the hip armor could also go on the shoulder! I extended each…
"If you frequently break your glasses frames like me, then these Ray-Ban RB 8903-5262 frames are perfect for you. You can see in the pictures the comparison between the original frames and the 3D-printed ones. If you're interested in…
Replacement frames for Gira System 55. You can choose from single outlet to 5x outlet frames. All my original frames and plates (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements…
Elegance and Protection for Your Frames
Two picture frames, 1:12 scale - actual sizes 30mm x 30mm & 50mm x 30mm. The included Fusion360 file is is presently set to 50 x 30mm but it’s very parameterised, so anything is possible. Have fun!
A Gridfinity frame for IKEA's Skådis board. The collection of Gridfinity frames is available in 12 sizes from 1x1 to 2x5 modules. The Gridfinity frame is mounted on the IKEA Skådis board by using T-nuts. Installation The Gridfinity frame…
Thanks to Vivero I redesigned his frames and added the text. I also made the frames wider so the can fit my ears better. All Credits to the original designer.
Modified from default caps to custom-made for 3d printer upper v-slot frames. I used it for my Creality Ender 3 v2 printer but it might work for other models too. Basic parameters: Dimensions: 210x210x72 mm Supports: not required Please…
3 different, fast to print bathroom frames.
This remix of Michal Fanta's excellent gravity spoolholder has a tweaked ramp design which reduces the vertical fall and kachunk noise of the original. Michal's project is of interest to MMU2S owners because it eliminates the need for a…
I broke the frame of my glasses a few months ago, and I've been wearing this 3D printed frame since then. I'm completely blind without glasses so being able to print my own frames make a big difference. Fusion 360 files included so you…
News: 12.03.25 STEP files available MR-30 Male Mounting Frames Here you will find my designs for the XT60 size and XT30 . Two different shapes Compact design Easy to assemble Plug must be inserted from behind until the tabs click into the…
The whole model uses about 90 grams of filament. I do 15% infill, Snug supports along the interior of the frame, no supports on the holes on the back of the frame fillets down on the picture backer. I also use .1mm layer heights to keep…
Modifying my computer for use as a server required installing more hard drives. The original case frame had space for only two drives. Thanks to these frames, multiple drives can be mounted. The assembly set includes one base and two…
This is a remix of a spool holder design by Stamos . It fits 2020 (or 2040) extrusion frames. The version is meant to be used with the roller that comes standard with the Ender 3 and other Creality printers. It can be placed on the top of…
Different sices of Humbucker Frames. If you want a specific sice: Just cut the 10.5 file in slicer
It's just a bit of fun. I have designed and printed a pair of glasses frames to suit my glass's lens shape in clear PETG Prusament. I have attached the part models of the frames and arms in a STEP format if anyone would like to customise…
This bedside kindle holder has been designed from the ground up with 3D printing in mind. A single piece kindle holder inspired by mid century modern magazine racks. A functional design with aesthetic appeal. Printing and Assembly The…
I used John Fisher’s Star 45 rev. 5 DXF files to generate a 3d model of the Star 45 frame layout as it would sit on your building board. I also used his fin and rudder (1/8" rod) DXF files for the foil plates. His rev1, rev2, and rev3…
I shoot a lot of Instax, especially now that I adapted a LomoGraflok back to my Graflex SLR, and I like to scan the film for sharing or before giving away the unique physical copies after shooting portraits. I designed this frame to save…
INTRODUCTION We have created various FT EMS frames for people to fit with any projects they are working on. These follow the standards used for EMS which means that all of the mounts that are located in the Mounts Repository will work.…
You are going to need to go slow and keep the breeze off the print or it will warp
The Arm and Bracket parts slide together after clipping them onto the extrusions. See photos. The C270 camera mount tilts and swivels to provide complete control over camera placement. I have provided 6 different camera mount positions…
here you need no frames to stack the crates, they just fit into each other
This is a recreation of the Deep Side bar for a Hoffman-style self-spacing frame for a Langstroth hive or similar. This is a design that has been around for a very long time, but there are some variations in how they are made from…
Friction fit screen printing frames. Use the tension ring to secure a piece of mesh screen printing fabric to the frame. coat in UV resin and expose using your resin 3d printer. Watch the full video and demonstration here:
Made a flat, empty base frame, where own designs can be easily added on top such as text, shapes or other things. Based on the empty frame, I created 3 examples: Edge Squares Rectangles Single Circumferential Spline For own designs,…
This is a remix of https://www.thingiverse.com/thing:2798109 . I beefed up the hinges to reduce the chance of breakage. There are two frames. One is just "plain" ; the other has two holes in the upper corners into which you can mount…
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Meet the all new Pickle Racing frames series. I worked with Darren Allatt from…
I made this for my daughter's teacher as a gift at the end of the year. I first searched for the original game (and wanted to replace the pictures) only to discover that I don't have it anymore. So I tried making one myself. I know this…
These are door frame hex tiles for the Gloomhaven board game. I liked the wall door frame pieces posted by rbross / paralepsis, but I also liked the variety of doors offered in the MagHex series by Xevin. I merged the stone door frame…
Easy to print frames. Just slide your photo down into the grooves on the back. Remember to cut the photo slightly larger than the 2"x2" or 3"x3" dimensions. Start larger than what you think you need and start trimming small sections of…
Wanted to create my own hex tile holders for the Fallout Board Game that didn't require magnets. These frames interlock mechanically instead. Also included is a stand to hold them when not in use. Printing is simple enough. Support is…
The picture frame gets printed in 2 colors, there is a small hole in the back to hang. The items are scaled to print in multiple colors based on your choices and slicer. I glued the items to the frames using a dab of hot glue.
This is a versatile spool holder for 2020 (or 2040) extrusion frames. There is also a version for Prusa i3 MK2/MK3 style frames . It can be placed on the top of the frame (optional, there is a hole, if you want to secure it with an M3…
Many door frames are not square, or the door hinges are not mounted correctly. This causes the door to not fit evenly in its frame. Often, a door will rub on the frame near the top on the latch side, making a rubbing squeal and/or making…
This project contains a set of 3d printable main side frames and lower frame for a BLue Robotics Bluerov 2 Remote underwater Vehicle https://www.bluerobotics.com/store/rov/bluerov2/ At the time I created these STL copies of the real frame…
Made these for Prusa‘s picture frames competition. Photo frames for 10x15 cm (4x6”) and 13x18 cm (5x7”) photos. This is the two most common photo format. The photo frames are composed by two parts, sliding one to another. They are…
I have designed this to replace or enhance the looks of frames around wall sockets. This should be compatible with Gira's system 55. Suitability for any purpose is not guaranteed! Install at your own risk. As always, be very careful when…
This is a fully 3d printed mecanum drive for your XRP perfect for indoor and small spaces. For outdoor exploration I would recommend you some of my other mods like the xrp off-road mod , the xrp track system or if you wanna go to water…
I redesigned the Bee Barn XL frame concept by Jim at Vinofarm and optimized it for 3D printing on consumer-grade 3D printers like the Prusa MK3. The new frame design requires negligible "human time" to manufacture, very little time to…
Print it flat and use heat to adjust the lenses fitting and nose bridge.
This is a drum sticks holder for electronic drum sets with 1.5 inches (38.1 mm) o.d. tube frame. This frame tube size is very commonly seen on Yamaha, Roland and Alesis electric drum sets. The drum sticks holder is designed to clip onto…
Ersatzabdeckrahmen kompatibel zur Serie future® linear von Busch-Jaeger. Modelldateien für 1-fach, 2-fach, 3-fach, 4-fach und 5-fach-Rahmen Am besten auf der Sichtseite liegend mit Stützmaterial drucken. Ich verwendete PETG mit PLA als…
Tiny hook (2cm square) for small, lightweigth picture frames, use double sided tape to stick it on the wall.
2021-05-29 Update: Added hinges and mounts for Bear upgrade frame 2021-04-10 Update: I have created an additional design to house typical 25A mosfet board, the spacing between the screwholes are 4,25mm and 5,25mm Modified the base version…
This is an adapter for combining the Shelly Wall Switches e.g.: https://amzn.to/3XbSPc6 https://amzn.to/4e7JSXF https://amzn.to/458Ltsc with or without https://amzn.to/4aP6PMe https://amzn.to/456prWQ with the Jung CD500 System such as…
Only did 1x4 as that's the only one i needed
Description: I designed this modular frame system because I wanted an easy to change and design format for my instax photos. For me this design needed to: Have a bit of wall presence. I wanted to make the frames thick enough to sit…
Photo frame for 100x150mm photos printable with vase mode.
You can arrange your photos in limitless configurations with this system (provided you can balance them). The frames can rotate, so you can put pictures on both sides. These fit 4x6 photos, I couldn't fit anything bigger on my Mini's bed…
This is a single-piece display stand for tea cakes, decorative plates, picture frames, etc. Once printed, you can fold the stand so it stands up. I suggest printing in PETG for durability. PLA will technically work, but will break much…
Six decorative frames to fit standard UK light switches (86 x 86 mm). All models are 2 mm deep. Rescale if desired. LSF-Leaves is quite fragile, take care when removing from plate. NEW: Volume 2 has six more frames! Find it at…
Very easy to make liquefied propane tank, just make 2 ends, insert 2"x4" pipe in the center to hold the two pieces together and make two tank support frames! One day I'll do a remix making it more round instead of choppy!
The 3D model "IKEA KOMPLEMENT Shelf Hook for all PAX Wardrobe Frames" is a detailed and accurately scaled replica of the original KOMPLEMENT shelf hook designed specifically for use in all IKEA PAX wardrobe frames. This model provides a…
The rotating ball helps to guide the filament from the spool to the printhead. Mounts to 20 mm (or 40 mm, etc.) T-slot frames with a T-nut. This is a "print in place" item, so DO NOT use supports when printing. Recommended print…
Easy and simple "BYO topper" trailer frames with hitches. Ready for whatever you want to add on top. "Axles" can be glued on wherever you want, and the wheels can be glued on the "axles" at different heights to change the ride height of…
Combine Zack Freedman's amazing Gridfinity system with the standarized IKEA Skadis board with these base frames. It's build upon the ‘IKEA Skadis Universal Mounting System’ (SUMS). Gridfinity is based on a grid of 42mm, where IKEA Skadis…
This is an adapter to use existing Pico 4 lenses from VR Optician on a Quest 3 VR headset. After printing I had to carefully cut away some blobs on the outer side part that clicks inside the lens frame of the headset to make it fit. Be…
My current frames broke, so i designed this. The earpieces do fold over like normal glasses. Print the front part (frames) of the glasses face down. Print the earpieces in the best way you can figure. I found it best to have them "lay…
I designed this speaker mount for my SimLab P1-X Pro using the SteelSeries Arena 7. Should work with Arena 3, 7 & 9. Should also work with extrusion profiles for various sim racing frames. Mounts using single M6 socket head bolt. SimLab…
Mounting frames for my shadowbox signs . Jun 2025: added the mini-frame, 10mm thick snap fit frame with knockout mounting holes; and the frame-insert model for color contrast backing / hiding mounting arrangements. Sep 2024 update: Snap…
To simulate EMD Flexicoil 2 axle trucks. These are not sprung. The springs are printed for a more prototypical look. I highly recommend getting them printed in MJF Nylon 12 for greater durability. I use JawsTec https://www.jawstec.com/
I wanted to decorate the hallway in our flat with some pictures. But as I continuously take new ones, and I don't want to get out the hammer and nails every time, I designed this modular picture frames. With this one you just need to…
🟢 Free model of the Frame part. 🟢 Preview the fit and style before buying the full model. 🟢 No re-print required. Features Easy-swap design - Unique lens retention system Threaded inserts - Easy to take apart. No plastic threads. Dowel…
Moutains 3 parts/frames - wall art, easy to print
Thin frames for Instax photos. There are versions for Instax Mini, Square and Wide Use a bit of heat to bend the leg backwards to make the frame stand upwards The photos slide right in from the top Check out the simple photo stand or the…
This is a set of 3 mirror frames that suit a 30mm diameter mirror from craft shops The mirrors are for 1:12 scale for my Sisters and Wife's dolls house This is another item in a series of 1:12 Dolls House items I will be publishing,…
A modified replica of this French cleat: https://www.thingiverse.com/thing:4630294 I adjusted the dimensions slightly to give the parts less play at the sides and more stability, added screw holes for the "to object" part (which were…
Recently I attended Fan Expo Philly where I bought a bunch of fantastic art. I wanted a cheap and quick way to display this art so I made these 3D Printed frames. I used this as an opportunity to work on my rapid prototyping skills! If…
visle's Scaper Hook didn't fit my MK4. I didn't find any that did so I took the opportunity to get more Fusion360 practice and make my own. As noted in @CrankyKoala_909727’s make, it also fits the newest MK3S+ produced after the release…
Fitted for 30x30 frames, might add 30x20 and 35x35 later. Distance between the frames is about 30 mm, provides enough airflow to get perfect drying results. I'd suggest PETG, so it has enough flexibility to clamp on.
Extra bumpers / antennas to attach to front of vacuum's bumper to prevent it from getting stuck under kitchen cabinets. Printed from PETG.
(This is the same as original thing 4965384 but reuploaded because it won't get listed on my designs page.) Print flat as shown in the last image. Original source for temples, hinge, and nosepad design is below, included temples here just…
I love the Framed Wall Art collection from Ken Mills and wanted to make a versatile wall mounting and standing system for the frame. I'm very happy how it turned out. https://www.printables.com/de/@nightfallvt/collections/646677 I…
Update Feb 24, 2024: Updated frames so picture would be more centered vertically. Update Feb 23, 2024: Updated frames to increase clearance for better fitment of photos. No supports! The mini, square, and wide frames were designed for the…
My frames broke so rather than spend another $300 on new frames, I decided to print a new set. This is designed to fit my particular lens shape but I suspect with creative use of the XYZ scale factors and maybe some hot air a lot more…
I designed this simple five-point star frame as an ornament with various uses: The variants with one hole can be used to hang them as decoration, but there are also variants with no holes - if you like to glue or tape them to a surface.…
This bracket adds structural rigidity to the inside corner of a structure made of 20mmx20mm t-slot extrusion. The bracket is used for corners that have two members butting perpendicularly into one other frame member. This specific design…
The trim pieces can be printed in a different color from the backing if you wish, since they are separate pieces. Just use CA glue to join the pieces together and then (when dry) slide the picture into the thin slot on top. If you use the…
Update: Included a version with rotated supports. I've also uploaded the OpenSCAD script if you want to customize the frame ( check out this guide if you've never used OpenSCAD ) I recently discovered the 100Hex project by tecnoloxia_org…
I lengthened the existing sideframe to fit a USA Trains R22-115 motor block. I also removed the plastic springs and added receptacles for real springs.
Panel Frames for this model: Only used 10mmx3mm magents and some foam tape Material used: * PETG Prusament Galaxy Black: 1.5KG * PETG Prusament Orange (Covers): 0.18KG * Magnets: 36, 10mmx3mm * Foam tape: 3.8m, 8mm x 1mm (…
Window Air Conditioner AC Side Panel Frames
Print a back piece and then the frame itself, then sandwich the picture between them. You can use superglue to adhere the pieces together. The frames look especially nice if you use one of those carbon fiber smooth plates. Textured plates…
