Search results: fuge

Sort order

Counting matching models…

P
PrintablesMatt

Stackable Stand for 1.5 ml and 0.5 ml Eppendorf Type Microcentrifuge Tubes

This stand is designed to accommodate 44 1.5 ml and 30 0.5 ml Eppendorf-type microcentrifuge tubes. Multiple stands can also be stacked on top of each other, making them ideal for storing a large number of samples. The stand was designed…

Downloads
244
Likes
63
Rating
0
P
PrintablesAdam

mHct Crit Carrier for Centrifuge

This mHct microhematocrit carrier is designed to hold 75mm capillary tubes for use in a centrifuge accommodating standard 15mL tubes. It's an improvement on the design included with the USA E8 Combination Centrifuge (whose original…

Downloads
151
Likes
18
Rating
0
P
PrintablesJeyMco

Grout float (jointing / voegen / Fugen) for small areas (and hands)

Two grout floats in 2 different sizes: small (7 x 15.6cm) with handle smaller (7 x 10cm) with crim grip Don't forget to (hot glue 130C) add a foam float (I got mine from the hardware store), I recommend at least 5mm larger foam as the…

Downloads
43
Likes
5
Rating
5
P
Printablestom

Fugenkratzer/ Joint scraper

Dies ist ein einfacher Fugenkratzer, den wir auf unserem Balkon benutzen. Der Griff ist angeschraubt, so dass man den Kratzer bei Abnutzung austauschen kann. Zusätzlich werden benötigt: 2 x Zylinderkopfschraube M4 x 18 mm 2 x…

Downloads
33
Likes
6
Rating
0
P
PrintablesAGGRC

Tube Rack for 1.5 and 5 mL Centrifuge Tubes

The centrifuge tube racks are specifically designed to accommodate both 1.5 mL microcentrifuge tubes and 5 mL centrifuge tubes, providing stability during solution handling and mixing. These models are integral to operations at AGGRC,…

Downloads
20
Likes
4
Rating
0
P
PrintablesJoKa

Vortex attachment for falcons and microcentrifuge tubes

The vortex genie 2 in my lab has a special attachment which made it difficult to vortex microcentrifuge tubes and use it for the brief vortex of conical falcon tubes. So I designed this attachment to tape it on top of the original…

Downloads
12
Likes
1
Rating
0
P
PrintablesKnochen911

Fugenglätter/ silicone trowel

Perfekt für Silikon Fugen glatt zu ziehen. Perfect for pulling silicone joints smooth.

Downloads
2,346
Likes
322
Rating
4.96
P
PrintablesGeoffP

Eppendorf (Microcentrifuge) Tube Rack

This Eppendorf (microcentrifuge) tube holder took inspiration from Stefan Huber's model ( https://www.printables.com/model/310767 ). I tried printing Stefan's model numerous times but the spring part of the rack was consistently failing…

Downloads
480
Likes
33
Rating
5
P
PrintablesJSeppl

Fugenglätter / Grout Smoother

Joint smoother with 3 different roundings 10 mm , 2x5 mm 1 mm. Size 20x20.

Downloads
429
Likes
17
Rating
5
P
PrintablesXimple Printing

Stackable Falcon centrifuge tube holder 50ml+15ml

My space in our lab fridge is a mess – many times i had to move out all the tubes in order to get the only one that I was looking for. They were lying flat, stacking on top of each other. So I designed this tube holder. This helps me to…

Downloads
356
Likes
29
Rating
4.67
P
PrintablesSerge Nader

Hand crank centrifuge

One of my very first prints, post-processing may be required for shaft parts to fit (light sanding). I updated the files so that sanding won't be necessary. This hand cranked centrifuge takes 5 mL tubes and can spin liquid down to avoid…

Downloads
340
Likes
85
Rating
5
P
PrintablesShane Reetz

Vial Rack - 50ml Centrifuge

This is a rack designed for robotic experiments with vials. It has high level of fit tolerance so it's easier to teleoperate robots to put the vials in this rack.

Downloads
318
Likes
3
Rating
0
P
Printablesreefab

DIY Centrifuge

Designed for PHYSIQUE SANS FRONTIÈRE , a division of the French Society of Physics . This 3D printed centrifuge uses a drone motor to spin 8 1.5ml Eppendorf tubes. It is also designed to be very cheap and accomodating of different parts…

Downloads
287
Likes
172
Rating
4
P
PrintablesPeagler Science

Microcentrifuge Tube Rack

A rack for 1.5mL centrifuge tubes, capable of holding up to 75 tubes. There are two versions: one with handles and one without. I'm experimenting with a version that is in vase mode for decreased filament usage. Fits on most build plates.…

Downloads
281
Likes
22
Rating
5
P
Printableseurad

Dremel laboratory centrifuge

This is a remix of Laboratory centrifuge less than 5$ by dustkris . I changed it's orientation so I can use it with Vertical Support for Dremel by RobJP_ . Printed with PETG and 100% infill - better safe than sorry! I made an additional…

Downloads
249
Likes
161
Rating
0
P
PrintablesBeo666

Silikonfugenglätter 0 bis 10mm Fugenbreite

Die perfekte Silikonfuge im Handumdrehen. Mit meinem Silikonfugenabzieher sind normgerechte 45° Fugen von 6, 8 und 10mm möglich. Ich empfehle die Variante aus TPU zu drucken.

Downloads
245
Likes
26
Rating
4
P
Printablesbart

Centrifuge adapters from 50 mL to 15 mL Falcon tubes and various glass vials

We have a centrifuge at work with a fixed rotor that takes 50 mL Falcon tubes. We also have a microcentrifuge that takes the small Eppendorf tubes (1.5 mL or whatever they are). But nothing in between and sometimes people want to…

Downloads
242
Likes
24
Rating
5
P
PrintablesVSP

Mini benchtop centrifuge for PCR strips and tubes

In our genetics lab, we have a couple of small and simple centrifuges only to spin down PCR strips and tubes to remove droplets of liquid from the wall and cap of the tubes. When one of these broke, I realized how expensive these…

Downloads
228
Likes
140
Rating
0
P
PrintablesJolu art design

Vegetable dryer, centrifuge

Practical manual vegetable dryer, designed for children, as functional as the original size one, can be scaled to bigger size without compromising its functionality once printed

Downloads
222
Likes
35
Rating
0
P
Printablesjs500

Fantastic Factories with Manufactions and Subterfuge Insert / Organizer

This is an insert / organizer for Fantastic Factories with the Manufactions and Subterfuge expansions. It holds everything in the main box and has separators for the blueprints and contractors from the base game and for each expansion.…

Downloads
218
Likes
44
Rating
4.71
P
Printablesyahbluez

Silikonfuge - Set of 17 pieces

TL;DR Tool set 17 pieces with many sizes and shapes to handle silicone caulking. Collection tools, workshop Motivation Every time i needed them i didn't found them and was forced to buy new ones. Let's get started This model is so easy to…

Downloads
210
Likes
22
Rating
5
P
PrintablesCurlyVole

Microcentrifuge Tubes Rack 4x - straight or tilted

This rack was designed to hold a small batch of microcentrifuge tubes while working with them. Suitable for both the 1.5 mL and 2 mL versions. Should fit any tube with an outer diameter of 11 mm. The rack comes in a straight or a tilted…

Downloads
188
Likes
39
Rating
0
P
Printablesleizer.design

Hand Crank Centrifuge

Geared Hand-Crank Centrifuge A fully 3D-printable, hand-powered centrifuge driven by a simple gear system. No motor. No electronics. Just turn the handle and let the gears do the work! And yes, it’s super fidgety and incredibly satisfying…

Downloads
162
Likes
30
Rating
5
P
PrintablesRemiRafael

MicroCentrifuge Tube holder

These designs are tube holders for 1.5, 2 and 5 ml micro-centrifuge tubes. It is designed to hold individual tubes straight during weighting. I also use it to hold 5ml tubes on a magnetic stirrer. The design objectives where to make it…

Downloads
160
Likes
17
Rating
5
P
Printablesning

50 mL centrifuge tube stand, Bulbasaur, Low-Poly

Print with supports: there are steep overhangs in the eyes and on the backside of the bulb.

Downloads
158
Likes
17
Rating
5
P
PrintablesMasCreations

Laboratory Centrifuge

Laboratory hand-crank centrifuge. This tool can be used in emergencies or in the absence of electrical power.

Downloads
141
Likes
61
Rating
0
P
PrintablesMarkus

Dyson crevice nozzle / Fugendüse

Thie is a replacment for the Dyson crevice nozzle that comes with nearly every Dyson vaccum cleaner. The nozzle is 200mm long. Print standing with supports on buildplate only. For every one who want to remix this or want to create any…

Downloads
140
Likes
18
Rating
5
P
PrintablesRemiRafael

Holder for 50ml centrifuge tubes

This design is a series of holders for 50ml centrifuge tubes. The holders can hold 1,2,3,4 or 6 tubes. It can print without supports but you should make sure to have a very good bed adhesion. The shape is designed to allow to see the base…

Downloads
139
Likes
21
Rating
5
P
PrintablesDrBenC

Quick Print 50 mL Centrifuge Tube Holder

A colleague of mine needed a lot of centrifuge tube holders quickly for the lab, so I designed this. Printing in ‘vase mode’ with 0.2 layer height and 50 mm/s speed, these came out in about 45 minutes using just 8g filament, so you can…

Downloads
138
Likes
28
Rating
0
P
PrintablesxTheScientist-X

Fugenglätter, Silicone Trowel

A simple model for smoothing silicone joints . Average print time: 17 min. No supports

Downloads
129
Likes
6
Rating
0
P
PrintablesWilliBilli

Schattenfugen-Bilderrahmen / shadow gap picture frame

english: New: you can now change the dimensions of the canvas in the openscad-file und create the right stl-file New Version: Bilderrahmen-parameterized.scad While looking for a picture frame for my wife's 20x20 canvas pictures, I found…

Downloads
122
Likes
10
Rating
0
P
PrintablesJesus Lerma

36x 50ml centrifuge tube holder rack

Tired of struggling with scattered tubes and cluttered workspaces? Say hello to efficiency and convenience with our premium 36-Centrifuge Tube Rack! Designed to streamline your laboratory workflow, this rack offers ample space to securely…

Downloads
122
Likes
14
Rating
0
P
Printablesjoegoodsell

Centrifuge / Coffee Storage / Single Dosing Tube Funnel

Designed this funnel for used 50ml centrifuge tubes that have become ubiquitous in the specialty coffee community. Tolerances are not tight so you should not need to worry about resizing. (External diameter of tip of funnel is about…

Downloads
108
Likes
9
Rating
0
P
Printablesgringer

HandFuge - Hand-powered centrifuge

A 3D-printed version of the Paperfuge, based on ideas presented the following paper: http://www.nature.com/articles/s41551-016-0009 The thin adapter pieces fit around a 1.7ml microfuge tube, which then sits in the grooves in the model.…

Downloads
106
Likes
21
Rating
0
P
PrintablesLayerCraft

Fugenzieher

Fugenzieher kompakt ------------------------------------------------------- Compact silicone grooving tool

Downloads
100
Likes
7
Rating
0
P
PrintablesJan-Maarten

dremel centrifuge addon

Inspired by thing:1483 I made an add-on to turn your dremeltool into a centrifuge. It has moving parts, but does not need support during printing or assembly afterwards. The trick to do this is use ball-and-socket joints, with a 0.2 mm…

Downloads
98
Likes
15
Rating
0
P
PrintablesSnowZA

4x6 cap-retaining tube rack for stickered microcentrifuge eppendorf tubes.

The lab where my wife works got a new automated pipetting machine, and the tube rack that is available for that machine is apparently a nightmare to use. I made this version for her based of the design used in another machine. The rack is…

Downloads
98
Likes
13
Rating
0
P
PrintablesŠimon Smětal

Lego technic 1,5 ml tube centrifuge head

Build a centrifuge out of lego technic or Mindstorms and attach this head on a shaft. Please cover the whole thing with some box for protection. Print instructions Try to print with denser filling. This part needs to be solid.

Downloads
96
Likes
20
Rating
5
P
PrintablesThorrak

Stackable 15ml Centrifuge Tube Holder

This is a 15ml centrifuge tube holder I designed for holding nutrient blends for making mead. It also works for anything that will fit in a centrifuge tube. It is designed to be stackable, with a small imprint on the bottom of the rack to…

Downloads
86
Likes
9
Rating
0
P
Printablesder_test

Tile Joint - Fugenkreuz - 5mm

5mm tile joint. Customize This thing was made with Tinkercad. Edit it online Category: 3D Printing

Downloads
86
Likes
4
Rating
0
P
PrintablesKarnimaniac

50 ml centrifuge tube holder for 7 tubes

A holder for up to seven 50 ml centrifuge tubes. I use the seven centrifuge tubes to prepare my water soluble supplements for the week. Maybe its useful for someone. Doesn't need supports to be printed. Edit: The holder fits 50 ml…

Downloads
86
Likes
24
Rating
0
P
PrintablesIñigo Demerath

Variety test tube holder / rack (Microfuge, falcon, conical, and test tubes)

Holds a variety of tubes 50mL Conical / Falcon tube 15mL Conical / Falcon tube Test tubes 1.5mL Microfuge tube 0.6mL Microfuge tube No supports needed, print with the points of the teardrops facing up. Tolerances tuned for Fuzzy Skin,…

Downloads
84
Likes
6
Rating
0
P
Printablesgringer

Hand-crank Centrifuge

Geared / hand-powered centrifuge, with triangle bit adapter and rotor. This is for spinning down liquid in a tube for MinION sequencing, so should only require a few tens or hundreds of Gs. For a hand-powered design with a faster spin,…

Downloads
83
Likes
24
Rating
0
P
Printablesning
Downloads
82
Likes
14
Rating
0
P
PrintablesBaum

crevice tool / Fugendüse Miele

englisch This is a model for a replacement crevice tool for the Miele Complete C2 vacuum cleaner. After losing my original nozzle, I designed this model as a replacement to the official Miele crevice tool . The new nozzle allows for…

Downloads
81
Likes
2
Rating
0
P
PrintablesSnomp

Centrifuge Drill Bit

Suitable for 1.5ml Eppendorf tubes

Downloads
81
Likes
25
Rating
5
P
PrintablesKyrian

Bouchon pour tubes à centrifuger coniques de 15ml

Bonjour, Voici un bouchon de remplacement pour les tubes à centrifuger coniques de 15ml ( http://www.cloup.fr/type.php?code=Tp2041&scat_id=147 ) Les bouchons d'origine ne sont pas très solides. Le fond du bouchon est conique afin…

Downloads
80
Likes
2
Rating
0
P
PrintablesAndrew3D

Eppendorf microcentrifuge tube cap lock

Ideally print in PC but works with PETG. Use at own risk.

Downloads
79
Likes
6
Rating
5
P
PrintablesPeagler Science

1.5mL Microcentrifuge Tube Rack Vase

Based on my earlier design, the Microcentrifuge Tube Rack , this version is printed in vase mode, reducing by over half the filament (110g to 50g) and time (11.5hr to 4.5hr) required.

Downloads
78
Likes
8
Rating
0
P
PrintablesMatthew B

0.2 mL PCR Tube Rotor for Mini-Microcentrifuge

0.2 mL PCR Tube Rotor This is an alternate rotor designed for a benchtop mini-microcentrifuge. It can hold standard 0.2 mL PCR tubes and works well with individual tubes or 8-tube strips. For a mini-microcdentrifuge like the the one…

Downloads
77
Likes
16
Rating
0
P
PrintablesWilliBilli

Schattenfugen-Bilderrahmen - druckbar in einem Stück / Shadow gap picture frame - printable in one piece

english: Shadow gap picture frame for canvas pictures. The size is only limited by the print bed. Smaller picture frames can be printed in one piece, which makes printing much easier and eliminates the need for assembly. New sizes can be…

Downloads
74
Likes
7
Rating
0
P
PrintablesRemiRafael

Holder for 15ml centrifuge tubes

This design is a series of holders for 15ml centrifuge tubes. The holders can hold 1,2,3,4 or 6 tubes. There are two versions named "compact" and "stable". They differ by the size of the legs: "compact" has smaller legs while "stable" has…

Downloads
74
Likes
13
Rating
0
P
PrintablesJpxfrd

Microcentrifuge/PCR Tube Rack for 0.2, 0.5, 1.5, and 2ml Tubes

There is a version with and without handles. Holds 48 0.2ml tubes, 40 0.5ml tubes, and 36 1.5/2ml tubes. The bottom of each well tapers to a point to help tubes sit upright. The 0.2ml tubes are arranged in rows of 8 spaced 9mm apart to…

Downloads
71
Likes
7
Rating
0
P
Printables0800peter

Fugendüse für Staubsauger VaccuumCleanerLongNozzle

needed for the cleaning of enclosed Printer and the Room in corners and hidden places. this thing fits in between, needs no space to store and is always handy. 16 mm diameter 15 cm long small nozzle that fits on 34-35mm inner diameter Vac…

Downloads
69
Likes
4
Rating
0
P
Printablesreefab

F.Lab's DIYbio Centrifuge Repaired and New Electronics

The STL files are just repaired so that they can be used with Slic3r. I'm using a Digispark instead of an Arduino for controlling the speed, you can find source and instructions at https://github.com/reefab/diybio_centrifuge Category:…

Downloads
68
Likes
28
Rating
0
P
PrintablesJustAJoJoke

Falcon and Microfuge Tube Holder

A rectangular test tube/eppendorf tube holder with multiple sized holes for various tubes

Downloads
66
Likes
10
Rating
0
P
Printablessparrow

Slowmo Centrifuge

Stepper motor driven centrifuge for spinning down cell culture samples. Variable RPM control without programming from 0-1000 RPM.

Downloads
63
Likes
29
Rating
0
P
PrintablesGerald

Bosch unlimited 7 Fugendüse und Zubehörhalter

An meinem Bosch unlimited 7 vermisste ich weitere Zubehörhalter und eine Fugendüse. Mein Zubehörhalter hat eine Aufnahme für den Schlauch, für das Verlängerungsrohr und für eine breite Staubdüse. Die Aufnahme für den Schlauch ist mit…

Downloads
62
Likes
9
Rating
5
P

Schonender Fugenkratzer

Geeignet für das schonende Sauberhalten offenen Fugen ohne Kratzer oder andere Spuren zu hinterlassen.

Downloads
62
Likes
5
Rating
0
P
PrintablesR0285

Centrifuge Tube Filtration Insert (50ml) / Falcon Tube Filter Insert

50ml Falcon tube insert to use in centrifugation applications. Printed with a resin printer (Printed vertically with an 20 degree tilt). I added another version which prints well with fdm printers as well (printed laying flat) Made to…

Downloads
61
Likes
11
Rating
0
P
PrintablesJesus Lerma

50ml centrifuge tube holder rack

Revolutionize your calibration process with our Centrifuge Rack designed specifically for pH and ORP standards. This compact yet robust rack offers a convenient and organized solution for preparing and storing calibration solutions in…

Downloads
61
Likes
6
Rating
5
P
PrintablesNick

Tube holder microcentrifuge tubes

Tube holder for three microcentrifuge tubes

Downloads
60
Likes
12
Rating
0
P
PrintablesDave Ciepluch
Downloads
59
Likes
8
Rating
0
P
Printablesgencitch

Adapter Plate - 75x75x30mm Fugetek radial fan to 3M Filter Bayonet

I wanted an adapter that would fit a 3M VOC filter and mount to a Fugetek 75mm x 75mm x 30mm radial fan (model number HT-07530D12M). I couldn't find anything that did what I wanted, so I made one. I printed this out in PETG with 2…

Downloads
58
Likes
4
Rating
0
P
PrintablesJames Gilliland

50ml Centrifuge Tube Stand

Stand for holding individual 50ml centrifuge tubes for experiments or storage.

Downloads
58
Likes
9
Rating
5
P
Printablesurill
Downloads
57
Likes
2
Rating
0
P
PrintablesJanus Kottisch

Lange Fugendüse fürs Osvac System

Optimal wenn man mal sein Auto aussaugen möchte. Durch die lange Fugendüse kommt man auch in die Hintersten Ecken. Und Parktisch wenn man das Osvac System hat.

Downloads
56
Likes
2
Rating
0
P
PrintablesJpxfrd

Microcentrifuge Tube Rack 40-60-80 Wells for 1.5ml or 2ml tubes

3 sizes: 40 well, 60 well, and 80 well. Bottom of each well tapers to a point to help tubes sit upright. All sizes are available with and without handles. Print with 15% infill and supports if printing handles. Dimensions (mm): 80 well:…

Downloads
55
Likes
7
Rating
5
P

96 Well 1.5ml Microcentrifuge Tube Rack

This microcentrifuge tube rack offers a secure and organized solution for holding your samples during benchtop experiments or storage. Simply import the file into PrusaSlicer, use a standard PLA or PETG profile, and ensure your print…

Downloads
55
Likes
4
Rating
0
P
PrintablesAntonio

Hand-powered blood sample centrifuge

This centrifuge was designed by Dr Giorgio Romagna, with whom I share my Printables account and my passion for 3D printing. The idea for the centrifuge came from a toy I used to play with as a child. It was made from just a thread and a…

Downloads
55
Likes
42
Rating
3
P
PrintablesStefan

Fugendüse

Das Original hatte mir zu wenig Wandstärke und ist nach dem ersten Einsatz zerbrochen. Zudem benötige ich sie etwas kürzer. Ich habe sie in weiß gedruckt und sauge damit Spinnweben und Staub an Wände und Decken weg. Mit dem weißen…

Downloads
54
Likes
4
Rating
0
P
PrintablesAGGRC

Tube Rack for 1.5 mL Centrifuge Tubes

The centrifuge tube racks are specifically designed to accommodate both 1.5 mL microcentrifuge tubes, providing stability during solution handling and mixing. These models are integral to operations at AGGRC, particularly when working…

Downloads
53
Likes
13
Rating
5
P
Printablesdemjansein
Downloads
53
Likes
7
Rating
0

Centrifuge tube adapter (50 to 15 mL)

This model was designed to be used in a “LD-5 Electronic Centrifuge” fixed angle rotor. The user's manual indicates a maximum relative centrifugal force of 2395*g. Print instructions: UltiMaker Polycarbonate, no need for supports, infill…

Downloads
52
Likes
4
Rating
0
P
PrintablesCannaCreator

Portable Mini Centrifuge with Adapter

Portable Centrifuge This was mainly developed for manual hand powered, where the idea is to have a string attached to the inner part, and pull to rotate. The spinner is made for 6 pieces microcentrifuge tubes, 1.5 ml/2 ml. With the…

Downloads
51
Likes
23
Rating
0
P
PrintablesDaniel Suhm

Fugenkreuze für Keramik- und Betonplatten

Fugenkreuze mit 60mm Tellerdurchmesser Fugen 3mm Steghöhe 15mm Sollbruchstelle für Randbereiche Zum einfachen und präzisem Verlegen von Terrassenplatten. Joint crosses with 60mm plate diameter Joints 3mm Bridge height 15mm Predetermined…

Downloads
51
Likes
2
Rating
0
P
PrintablesAdam I

Adjustable Centrifuge Tube Holder

This is a holder for centrifuge tubes. Placing the lid on top of the holder allows you to hold smaller tubes. No supports are needed, just print the lid with offset portion face up.

Downloads
48
Likes
14
Rating
0
P
PrintablesFrapperoni

Tube Adapters for Centrifuge

A simple adapter for laboratory centrifuges. Easy to print, any material is perfect (unless it has to be autoclaved). Printed in PLA for room temperature centrifuges. Printed with 0.2 mm layer height No supports If the plate is well…

Downloads
47
Likes
3
Rating
0
P
Printablesnjmck

225mL Conical Centrifuge Tube Rack (2x, 4x, and 6x models)

A rack to hold multiple 225mL conical centrifuge tubes, such as those made by Corning (Product number 352075). No more struggling to carry them around in beakers to keep them upright. Holes are 62mm in diameter to suit tubes with an outer…

Downloads
46
Likes
8
Rating
0
P
PrintablesProtspace

50 & 15 ml Centrifuge Tube Stand

Single Centrifuge Tube Stand Compact and stackable centrifuge tube stands. The wide, stable base helps prevent tipping, while the open-sided cradle makes it easy to insert, remove, and view tube contents—ideal for quick handling during…

Downloads
45
Likes
8
Rating
4
P
PrintablesC3D

Mountain Refuge: Moonlit Haven - Filament Painting

2.68 A beautiful filament painting in Impasto style. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA EryOne Matte BLACK FOREST GREEN…

Downloads
45
Likes
22
Rating
5
P
PrintablesMartyS

50ml Centrifuge tube dark cover

Keep your 50ml centrifuge tubes clueless, I mean in the dark. Print in black PETG. With less flexible filaments it may be difficult to slide the cap on and off. Fairly wide tolerances, should accommodate most standard 50ml tubes.

Downloads
44
Likes
22
Rating
5
P
Printablesning

Adapter to centrifuge 1.5 mL tubes in 15 mL tube slots

An adapter to centrifuge 1.5 mL tubes in 15 mL tube slots. This is useful, because most centrifuges that fit 1.5 mL tubes are not swinging bucket centrifuges.

Downloads
43
Likes
3
Rating
0
P
PrintablesHarePrints

Short crevice tool for Samsung Jet 60, 70, 75, 90, Bespoke Jet i Jet 95 (Fugendüse, suceur plat, boquilla para ranuras)

I found the original crevice tool to be too long, so I decided to design a shorter version. I successfully designed a locking tab that prevents the attachment from slipping off.

Downloads
42
Likes
5
Rating
0
P
PrintablesPietsProjects

Stackable centrifuge tube rack

A stackable centrifuge tube rack which holds 50 tubes with a diameter of 7 mm (0.5 mL tubes). The rack is printed in two parts. The top part needs to be glued in the base to construct the rack.

Downloads
42
Likes
4
Rating
0
P
Printableschrisebryan

pH Probe Rack with 50ml and 15ml Centrifuge Tubes for Buffers and Washing

Ever feel like you're losing track of probes, buffers, and washing tubes during pH calibration? This all-in-one pH Probe Calibration Station can be your new best friend. It keeps everything organized and handy in one compact unit. The top…

Downloads
42
Likes
3
Rating
0
P
PrintablesSchorle

Fugenkreuz Terrassenplatten

Fugenbreite = 2mm Tellerdicke = 2mm Tellerdurchmesser = Ø70mm

Downloads
42
Likes
5
Rating
0
P
Printablessparrow

Speedo Centrifuge V2

This is a variable speed centrifuge with speed control and readout. No programming or soldering required. If you don't have a 3D printer , you can Purchase Printed Parts from Portals :…

Downloads
41
Likes
12
Rating
0
P
PrintablesMrSmile

Centrifuga da laboratorio a manovella attrezzi non necessari - Hand cranked lab centrifuge no tools needed

Centrifuga a manovella per laboratorio, nessun attrezzo necessario per assemblaggio. Non necessita di corrente elettrica. Configurazione per 2 o 4 provette. Posizione provetta angolo di 45°. Dimensioni provette fino a 30 mm di diametro ed…

Downloads
41
Likes
17
Rating
0
P
PrintablesAndreas

Fugenklinge

Zum modelieren einer Fuge aus z.B. Silikon. Es sind 3 Modelle mit dem Radius 6,8 und 10mm im Download. Print Settings Prusa Mk3s Rafts no Supports no Resolution 0,2mm draft Infill 10% Perimeter 19 Filament brand Giant Arm Filament color…

Downloads
40
Likes
8
Rating
0
P
Printablescmos

Chamber-Door-Handle for Sorvall Evolution RC Centrifuge (SPARE)

The referenced original device seems to be not supported any more and spare parts seem not to be available any more. "Thermo Scientific Sorvall Evolution RC Superspeed Centrifuge"…

Downloads
39
Likes
3
Rating
0
P
PrintablesDrFeelgood

Fugenkreuz joint cross 3mm

Simple Fugenkreuze in 3mm hoch und 3mm dick.

Downloads
38
Likes
4
Rating
0
P
PrintablesMatthew B

Centrifuge Bucket Insert for 15 mL Glass Tubes

IMPORTANT: I have only tested this centrifuging at 100 x g. I DO NOT recommend centrifuging 3D printed components at high speeds. This insert is designed allow centrifuging of Corex No. 8441 glass round-bottom 15 mL tubes in an Eppendorf…

Downloads
38
Likes
2
Rating
0
P
PrintablesPFu

Centrifuge Tubes Holder

A holder for six centrifuge tubes. I use it for coffee bean dosing. Uses four M3 screws that should tap into the plastic.

Downloads
37
Likes
7
Rating
0
P
PrintablesMscottie

Fantastic Factories + Manufactions & Subterfuge expansions insert

This is an insert for the board game Fantastic Factories plus its Manufactions & Subterfuge expansions. It supports premium-sleeved cards. The boxes with lids print best at 0.16 layer height (0.4 nozzle) but 0.20 or thicker is fine for…

Downloads
36
Likes
7
Rating
0
P
PrintablesJpxfrd

Microcentrifuge PCR Tube Adapter

The adapter is the same width as 1.5ml and 2ml eppendorf tubes and is designed to hold 0.2ml pcr tubes for use in a microcentrifuge. The hole has a diameter of 7mm. The diameter is about 10mm throughout the bottom and about 13mm at the…

Downloads
36
Likes
2
Rating
0
P
PrintablesNadav Halwany

Centrifuge Tubes Holder

Printed with DO3D Silk Multicolored Rainbow PLA. Holds 8 x 50ml tubes and 4 x 14ml tubes. Has space for text that can be added using PrusaSlicer (First flip the top part, so the text you add will point upwards). The parts should be glued…

Downloads
36
Likes
14
Rating
0
P
PrintablesCorn_b

Stackable centrifuge tube holder great for organization 15 & 50 ml

Stackable centrifuge holder great for organization it can hold 6 15ml centrifuge tubes and 2 50ml centrifuge tubes.

Downloads
36
Likes
13
Rating
0
P
Printableshinand

Centrifuge tube stand

This centrifuge tube stand was designed in collaboration with a colleague from the microbiology lab at university of zurich It has 8 places for different sized centrifuge tubes. The first front row was created for the centrifuge Eppendorf…

Downloads
35
Likes
12
Rating
5
P
Printablessparrow

Speedo Centrifuge

A mostly printed centrifuge with variable speed control, speed readout, safety features, and improved rigidity. If you don't have a 3D printer , you can Purchase Printed Parts from Portals :…

Downloads
34
Likes
31
Rating
0