2,579 models
Printed at 0.3 mm layer height in about 4 hrs. designs to print with no infill and no supports. There are 2 holes under if you want to put an led light source to illuminate your gem crystals likewise you can paint the rock formation and…
Print approx. €4.41–€5.39 excl. taxPreliminary estimate for one variant
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
Organisateur de fiole de peinture à maquette, (pour fiole army painter, vallejo,...) -40 emplacements fiole peinture + 9 emplacements pour pinceaux -24 emplacements fiole peinture + 5 emplacements pour pinceaux
Print approx. €41.99–€51.32 excl. taxPreliminary estimate for one variant
This tensioner helps to maintain a good synchronisation between the two lead screws. That keeps the X gantry parallel to the bed during a print but also and especially between prints when the stepper motors are off. So the layers stay…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Salut, Voici un système de boîte de rangement à assembler et à largeur variable. Pour créer la boîte : Imprimer les 2 cotés grâce aux fichiers “coteD” et “coteG” Imprimer la traverse à l'aide du fichier “traverse” → Pour régler la…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Cable management clip for the Apple 70W USB-C Power Adapter. Based on the 67W adapter model from Petr Albrecht (the V2 model), I made a new design to fit the smaller 70W adapter (28.6x65mm). The adapter suits the Apple MacBook Air with M2…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
I simple, yet effective cable management clip for IKEA's Ivar cupboard system. Small hooks at the back of the clip grab into the shelf holding holes and hold the clip firmly in place. Printed all my clip in plain Prusament PLA and had no…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
This is a REMIX of the cable management by Pekcitron & Clivebradshaw, with a little Prusa Hex spin for the vents. I personally didn't like the factory ovals for the Mini, or the slots from Clivebradshaw, so decided to enhance the look a…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
HOW TO MAKE A BOUQUET: Put your flowers trough the holes, twist it and place your bouquet on your table, cabine or desk!
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for one variant
Simple Gemini wheel center cap, with tight flexible fit, that covers the center hole in Tesla Model Y Gemini 19" wheels.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Un plateau simple et fonctionnel imprimé en PLA pour organiser vos petits objets sur un bureau ou une table. A simple and functional PLA-printed tray to organize small items on a desk or table.
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
After switching up desks, we wanted clips like we used to have for our old desk to manage our pc cables. Taking inspiration of what worked we started from scratch. The big top hole is to place more permanent cables, like for you monitor.…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Panier de rangement 170x95 hauteur : 102mm
Print approx. €6.99–€8.54 excl. taxPreliminary estimate for one variant
Zodiac constellation Gemini keychain. If you print it in one color, it looks good. If you print it in two colors and use a natural or translucent filament as a base, when you illuminate it or place it in front of a light source, it will…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Just a remix created from scratch with FreeCAD. The model has the same dimensions, except the opening, they are both 5 mm wide.
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
Simple modification to the provide scad file to remove the hole, which didn't fit my usecase. I've only uploaded it as a remix incase others didn't feel confortable editing the scad and generating their own. Have also tweaked the opening…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Use this instead https://www.printables.com/model/456031-mellow-fly-gemini-v1v11v2v3-mount-for-voron0-01-02
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
Fastening cables with ties inside the enclosure is impractical for maintenance. It also makes less sense to pull all cables through the enclosure if the cable is only connected to components outside. This clip allows you to place the…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for PETGSource material: PET
I don't like cable-ties. This mods uses the 4 existing holes on top of the Tarmo5 main-frame to fix this cable-management adapter. You click the Electronic Speed Controller and it snaps, hold it tight. Same for switch (a bit harder to…
Print approx. €4.52–€5.53 excl. taxPreliminary estimate for PETGSource material: PET
Boite de rangement pour les buses de la MK4
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
This model was created by https://www.prusaprinters.org/de/social/119334-fortinmike and remixed by AJD.
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
Impression en PLA 0.3mm Draft
Print approx. €6.13–€7.49 excl. taxPreliminary estimate for one variant
Thanks for the great Desing, by viktori : https://www.printables.com/de/model/160673-desk-cable-management-hugger-clip-ikea-compatible-
Print approx. €2.76–€3.38 excl. taxPreliminary estimate for one variant
Prusament PETG 0.20mm Speed (default prusaSlicer) 20% Infill Wood screw diameter should be < 5mm
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
imprimer 3 pieces ,en n'importe quelle matiere, et les visser sous la table IKEA LACK aux dimensions de votre plateau en laissant un peu de jeu (1mm) j'ai laisse depasser de 1 cm le plateau pour pouvoir le saisir
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
Gemini Tag
Print approx. €4.93–€6.02 excl. taxPreliminary estimate for one variant
Petite rangement pour ranger ses carte micro SD, SD ou Clé USB. Ce range facilement. Idéale pour les trier.
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant
Das ist ein einfacher Löffel. Wir benutzen ihn, um Vogelfutter in ein Vogelhäuschen zu geben. Im Gegensatz zu unserer alten Version ist der Stiel ca. 100 mm lang, die Stielbefestigung verstärkt und der Durchmesser etwas größer. Der Boden…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
This is a cradle of the Losmandy Gemini II hand controller for the Berlebach planet tripod.
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple cable holder for the kitchenaid model: ARTISAN. To mount it, simply loosen the screws on the back and screw on the cable holder with these screws.
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
I am of the “keep everything off the OTA” camp vs. “put everything on the OTA but the kitchen sink” camp. With that in mind I designed and printed the models you see on this page. I share the mele with a “permanent” iOptron 360 tri-pier…
Print approx. €5.25–€6.42 excl. taxPreliminary estimate for PETGSource material: PET
support pour feutres de la marque promarker
Print approx. €5.78–€7.07 excl. taxPreliminary estimate for one variant
une boite de 8 cm par 9 cm et de 7,5 cm de haut un boite de 9 cm par 12 cm et de 7,5 cm de haut
Print approx. €6.33–€7.74 excl. taxPreliminary estimate for one variant
Base simple de rangement pour 35 batteries lithium avec étage de 35 batteries également. Permet un rangement stable en hauteur et un gain de place. Simple storage base for 35 lithium batteries with a 35-battery shelf as well. Allows for…
Print approx. €5.75–€7.03 excl. taxPreliminary estimate for one variant
(pour le français, voir plus bas) 4-Screws bits storage for Bosch UNEO suitcase (drill bit included with purchase) Settings Nozzle : 4mm Resolution : 0.15mm Infill : 15% Rafts : no Support : no Duration : ~1h Printer : Prusa Mini+…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Recover one of the legendary gems from your favorite platforming adventure! This 3D printable model captures the iconic look of the classic collectible and is perfect for any retro gaming collection. Tiny model build, less than 1".…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
V Tinkercadu je možno přepsat naše logo. Logo je místo číslice 6.
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
A simple 2 part cable management solution for your desks. Screw on base and never use zip ties again. The dovetails connect the base to the cross brace so you can always add or remove cables without any tools after initial installation.…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Dies ist eine Halterung für eine Gemüseschaufel, die nun beim Kochen immer griffbereit ist. Die Halterung ist mittels zweier Powerstrips Large (Haltekraft 2 kg) befestigt. Die Aussparungen ermöglichen das einfache Entfernen der…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for PETGSource material: PET
Simple hook that attaches to the backside of the CMP051 cable management tray from flexispot. The fit is designed for the outer slots, where the hooks nicely lock in place. I sticked to PLA with standard settings (0.2mm layer height and…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
100x160mm sign, reading "Is it an 'art portfolio' or evidence of derangement?" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
This is a cradle of the Losmandy Gemini II hand controller for the Berlebach uni tripod.
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for PETGSource material: PET
Ersatzteil für die Katzenhängematte Für Rohre mit einem Durchmesser von 25mm Für z.B. von Maximex
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
These are Losmandy Gemini controller holders for non-Losmandy mounts or tripods.
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for PETGSource material: PET
Underware is the universal, open-source, modular, extensible and re-usable solution for managing cables, mini-pcs, usb devices…pretty much anything, anywhere! Watch this video to find out more: Key Points Open-source design - The whole…
If you are looking for a solution for your cable management that is functional gives your Voron a clean look (that it clearly deserves 😎) is flexible, easy to handle and modify Maybe this is something for you! What I use the clips for:…
Update 11 Jul 2023: It has been a year since I designed the PMS (Poop Management System) for Bambu Lab printers. So many things have changed and so much development in the way we approach slicing & printing. I am doing an update and also…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
Fully print-in-place cable management winder for usb/headphones etc.....
Full version: https://www.printables.com/model/1409633-flexilink-cable-management-system Keep your workspace neat and organized with FlexiLink , a fully modular cable management solution. Each rectangular link snaps together to form a…
Parts for cable management under a desk. They are screwd to the desk and use tie wraps to fasten the cables. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: Doesn't Matter Supports: No Infill: 20 Filament: Any Brand…
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense Strong and practical under-desk headphone hanger Zip tie your headphone cable to the hanger for…
Print your own LTT Cable Management Arches! (Print/Assembly/Buyers Guide Attached Below) Shop the Original at lttstore.com Magnets: JC magnets are stronger than Amazon's: (JC recommended if you're not on a budget) Small(15x3mm): Amazon:…
This simple and effective cable organizer with various sizes allows you to arrange your cables according to the quantity, using the diameter that best fits the number of cables. It can be reused to avoid waste and is easy to close and…
Similar design to injection molded ratchet clamps you can find on the market. I use it to organize power cords. Hooks snap firmly in place but can be opened by twisting. The inner diameter is around 35 mm. Haven't tried resizing in a…
M E G A • U P D A T E • 09/27/2023 Added v2 with cantilever clips for an all printed design, no M3 screws needed! There is a slot for M3 screws next to the clip opening as a backup should you have issues with the clip so you don't have to…
I designed this minimalist laptop stand 💻✨ (mine is 14 inches). In addition to its minimalist design, what makes it special are the rear compartments for cable management 🔌 and special guides for long cables such as chargers 🔋. In the…
Tray footprint is 200mm x 70mm with a usable volume of 200mm x 60mm x 20mm. Screw mount version uses (4) #8 flat-head screws. No supports required. Double sided tape version has tracks for ¼" 3M VHB strips. Supports required on build…
Give me a Like 💗 Follow Me 😁🤗 Update 01.05.2024: Added rounded corners to 2 Models. I can't recommend it. If you have other ideas, feel free to change it, I Uploaded the Fusion 360 file. What you need: 1 x Tape 3M VHB 4910 ______…
Print In Place Hinged Cable Management Strip Check out the video here: I got tired of pulling my charge cables out of the various comb style management strips so i designed this locking one. Can be either screw mounted or double side…
Updates 2023/04: Improved tolerances on the housing and made the fit a little more forgiving, as some users reported difficulties getting the housing in place (v2.1). This version also includes improved cable clips. Drawer version v2 fits…
After an incredible 6 years together, it is finally time to ask my girlfriend for her hand in marriage. What better way than with my own parametrically designed 3D printed engagement ring?? The central design element, the wave, serves as…
Slim design . Up to 8mm diameter. Screws oder doublesidetape.
Create a stylish and functional display with our 3D-printable hexagon shelves. These modular shelves feature built-in LED lighting for an eye-catching effect. The cable management system ensures a clean and organized look, allowing you to…
Full version: https://www.printables.com/model/1509799-flexilink-xl-cable-management-system FlexiLink XL expands the original FlexiLink concept with wider links and increased cable capacity — perfect for thicker or bundled wires. It…
Simple under desk cable management hook. Designed to keep wires from being pulled out easily.. UDPATE 11-1-24: Added a version 2 file that has more rounded edges which are much safer when you bump into them. It's been thoroughly tested…
Cable Management EcoSystem Convert your environment into Factorio! Simple Clip to hold cables +6 diffrent styles of Trays! And few more in files ^^ Simple mounting way! Normal Head Cap Screw M4 Heat Insert (4-5mm) Countersunk Head Screw…
This is a set of models to help with your cable management. These are desk or table hugger clips. Clips were initially made for Ikea linnmon tabletop but are fully compatible with lagkapten and målvakt tabletops and any other tabletop or…
Easy print in place Cable management Settings: 0.2 quality 100% infill for maximum holding power Pla - Abs -Petg are good for this print for the corners it can be used TPU to be more flexible. The set has single double triple and…
Mini Hot Glue Gun Stand & Crafter Station This is the ultimate Quality-of-Life upgrade for any crafter or DIY enthusiast who uses a mini hot glue gun. Say goodbye to messy workspaces and dangerous tip burns! 🔑 Key Features: Integrated…
Update - October 26, 2026 This design will be removed in the next week or so due to concerns with the revised EU Product Liability Directive, Directive (EU) 2024/2853, which goes into force in early December 2026. My understanding is that…
Credit to ryandam here ! to his model 01/10/2022 283mm 19mm size + Thickness of 1.8mm 200mm longe - 19mm wide / cover 140mm longe - 19mm wide / cover 200mm longe - 25mm wide / cover 176mm longe - 25mm wide / cover more than this in…
This is the easy solution for getting cables off the floor. All you need to do is to install a few of these hooks and insert the cables through the openings. Removing and inserting cables is quick and easy. You can install this hook with…
I wanted a simple/lightweight cable management solution for my charger. It's inspired by this model from thingiverse, but was designed from scratch. I've included the step and f3d files so you can make any needed changes if you've got a…
Created these to manage the cables under my desk. Two versions, one for up to 6mm cables and another for up to 8mm cables. Each in a version that will hold 2 cables or 6 cables. Can be printed in virtually anything. I've tried PLA, PETG…
Some basic gemstone shapes, modeled to replace the stock tokens in the game Splendor. Highly recommend printing or at least painting in the corresponding colors!
Strong and practical under-desk headphone hanger Zip tie your headphone cable to the hanger for cable management Fits up to 45mm wide headphone bands Screw holes are 40mm apart center to center Max screw width 5mm Max screwhead width 10mm
4 piece ring pop box based off shbatm's Ring Pop Secret Ring Holder on Thingiverse. Entire print easily snaps together with working hinges and latch the hold the box shut. Recommend placing a small piece of foam in the inner chamber to…
Remix for voron 350, use supports. Print from ABS/ASA or what you want. CableDuctBody and CableDuctCover are original files. Rest is remixed from step files. Sizes: 140 mm original 168 mm remix 368 mm remix
Cable management strip which can hold wire up to 7mm in diametr. Strip is designed to be attached by double side tape...
Is your desktopalways a mess and full of cables everywhere? We created this little cable holder hive. 3 sizes for different cables Small size is now 120mm tall Medium size is now 140mm tall Large size is now 180mm tall We believe medium…
Generate cartoon-styled gemstones with our latest, free, 3D printable design. This simple customizable design allows you to choose the number of sides, dimensions and proportions of your gemstones. This design is* completely free * and…
I printed my clips with PLA but the geometry is simple enough for you to print with any material you want. If you print the clips sideways, you won't need supports. Once printed, you can attach them to smooth (clean) surfaces using…
The Ender 5 comes with a bunch of zip-ties for tying up all your cables neatly, but anyone who's actually tried to do this knows that the cables are all just a little bit too short. I was thinking about adding extension cables to my…
For fans Digimon series, Angemon Evolution. You can add some Led Light, in your Digivice base. Sculpting, creation idea by me. Hope you liked. Thanks
Under Table Cable Management
a simple cable management thing to tape/glue/screw under your desk Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.25 Infill: 50 Filament: NA PLA Notes: print on its side for best strength…
There's a useful USB port behind the P1P's LCD screen, but running a cable to the USB port could interfere with the printer. This print keeps the cables out of the way and hidden from sight. I've made a few mods for the P1P where you can…
My take on the LTT MCM range. Download and adjust the parameters to suit your magnets and application! Should work with pretty much any magnet size, though extreme dimensions may break the model. Features All the features of LTT MCM Fully…
This is a piece from my series on cable management for standing desks. Added a longer Version for Apple Power Adapters. To manage cords without screwing into the desk was my goal. For tabletops with a 25mm thickness, use this solution.…
🐉🔥 WallArt – How to Train Your Dragon 002 Take to the skies and bring the magical world of How to Train Your Dragon to your wall! This detailed WallArt is inspired by the unforgettable world of dragons, Vikings and epic adventures. The…
Spin it by 90° to have the big flat face on the print bed. Prints easily without support. I printed it in PLA(Prusa recycled PLA), although it might be better to print in a material that resists higher temperatures. A cable tie can be…
Cable duct / cable management for desks The cable guide can be created in any length! To be printed: The upper end for screwing under the table top. The foot as the lower end. The narrow frame under the foot to create space for e.g. a…
This cable drag chain is a remix of various models listed in the “original models” section to fit the Sprite Pro's fat ribbon cable and heated bed cables on an Ender 3 V2. Here are the number of models that I've printed and used to manage…
I like it tidy, so I designed a cover for the loose cables that are needed for the extensions of the LED strip and the filter system, which can be simply pushed or clipped on by means of a holder. I think this is a neat thing and it also…
GI Joe Gemini Style Astronaut Helmet For those in the know - Joes can have a variety of head sizes. I designed this one to fit the larger head size I had in my collection. I use raw filament for hinge pins and as a means to attach the…
You can easily add cables under or behind the desk for a quick and efficient cable management. There are several sizes to fit most desk thickness, and if it isn't enough there is also the source Fusion 360 file with a parameter…
Easy print in place Cable management hook Settings: 0.2 quality 100% infill for maximum holding power Pla - Abs -Petg are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
[3/12] GEMINI - THE TWINS Here is complete series of sculpted zodiac signs. All my photos are REAL and show an actual 3D-printed figure photographed by me. [ Suggested Print Setup ] Nozzle: 0.4mm Layer Height: 0.15mm ( You can adjust the…
I changed the gaps inbetween because mine were easy to break off while installing. This mod makes them a lot stronger. Thanks to ryandam for the original model, visit his github and share some love. He also has a longer version over there…
![[3/12] GEMINI - THE TWINS - Zodiac Series](https://media.printables.com/media/prints/52354f8e-1082-473f-bf8f-7e67f58424a8/images/9927935_c290e89d-d4f2-4287-b7f7-4acf9cc6733b_07c24775-55ff-4c26-a766-b28e7d42bf03/03gemini_001a.jpg)
