Search results: glasse

Sort order

Counting matching models…

P
Printablesschuetzi99

Glasses holder for car sun visor

This holder is clamped onto the sun visor of the car, or onto your shower cabin door. It reliably holds a pair of glasses without interfering. So the sunglasses are easily at hand when you need them. Easy to print with standard…

Downloads
20,771
Likes
5,168
Rating
4.85
P
Printablesrorys3D

Flexi glasses case

Case for glasses that uses 3D flexible structure. This model is printed flat and then folded into its final shape. Introducing video: Printing: There are small user support blocks under the side wall radiuses and it is intended to be…

Downloads
16,985
Likes
5,724
Rating
4.83
P
PrintablesCelta

Sunglasses Car Clip

Edit 24/11/2022 I've printed the model in ASA now so it should have a better resistance to heat. However, winter as come and the temperatures are not enough to properly test it. Do not print in PLA Works best for thick sunglasses (6mm…

Downloads
13,799
Likes
3,740
Rating
4.83
P
PrintablesFichl

PARTY GLASSES - just 20g filament - fast print!

3D Printable Party Glasses Key Features: Shutter-Style Lenses: The horizontal slits allow for partial visibility while maintaining the bold design. Easy to Print: No supports, just 20g of filament needed, printed in less than an hour.…

Downloads
13,102
Likes
1,167
Rating
4.88
P
PrintablesSD-3D

Glasses Stand

If you like this check out my Vernier & Pen Desk Organiser and Watch Stand that goes with this. Vernier & Pen Desk Organiser by SD-3D | Download free STL model | Printables.com Watch Stand by SD-3D | Download free STL model |…

Downloads
7,960
Likes
1,499
Rating
4.9
P
PrintablesSV3D

Thug Life/Gangster Glasses

print in place, no supports, easy to print

Downloads
7,836
Likes
1,183
Rating
4.87
P
PrintablesEricsko

Glasses

I always break my glasses by falling on the ground or sitting on them... I was tired of buying a new pair of glasses every time, so I decided to 3d print them. Easy task, but first I had to draw them. So I reused the lenses, but…

Downloads
7,152
Likes
618
Rating
4.77
P
PrintablesLayer Labs

Modular Glasses

Glasses frames with snap-fit temples for easy swapping of frame components or lenses. I use these as backup frames, but I may find a line of lenses for the frames for a future update. Source files are provided if you want to try to adjust…

Downloads
6,924
Likes
1,279
Rating
4.31
P
Printablesfifindr

Car Visor Sunglasses Clip

Use 4 walls + PETG. A simple clip designed for holding sunglasses or prescription glasses on a car sun visor. The clip attaches to the visor and keeps glasses easily accessible while driving, helping reduce clutter and prevent glasses…

Downloads
6,613
Likes
1,391
Rating
4.89
P
PrintablesSebastián Ruiz

Printed Glasses

Some day before a trip my original prescription glasses frame broke, so I had to use 3D printing to save myself from being close to being blind during the trip. A quick outline in a sketch, a couple of Fusion 360 tricks, and we have a 3D…

Downloads
5,263
Likes
289
Rating
4.67
P
Printableskosteklvp

Sir Nigel Squintsworth Glasses Holder

This is a Squintsworth Glasses Holder. It works well with any glasses or sunglasses. Looks great on a desk or night stand. Recommended print settings layer height: 0.2 mm infill: 10% gyroid perimeters: 3 supports: no Prepared files…

Downloads
5,107
Likes
1,134
Rating
4.99
P
PrintablesMaxime Gosselin

Thug Life Glasses / Deal with it

Print with supports on build plate. Insert temples in holes.

Downloads
4,216
Likes
840
Rating
4.87
P
PrintablesJosé Pedro

Glasses Holder Bust Collection - Famous Edition

Bring personality to your desk or shelf with this collection of 3D printed bust-style sunglasses holders — each one inspired by a different iconic character or figure. Perfect for organizing your glasses in a fun and creative way while…

Downloads
4,194
Likes
1,154
Rating
4.95
P
PrintablesKeks3DPrinting

Thug Life Glasses

Thug Life Glasses

Downloads
4,101
Likes
868
Rating
4.77
P
PrintablesBilliam

Horrible goose glasses holder

Inspired by a great game about a bad goose Remixed from: Goose by Maggiman2001 Print instructions Both the neck and beak require supports. I printed both flat side down. I used Inland PLA+ white, Paramount Matte Black and McLarren Orange…

Downloads
3,783
Likes
822
Rating
4.78
P
Printablesarcanelayers

Sunglasses Car Visor Clip

Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to…

Downloads
3,703
Likes
650
Rating
4.7
P
Printablesbunnyology

Helping Hand: Glasses Holder

This is a scan of my hand holding glasses. The socket deliberately is a bit out of centre so that eye glasses placed between thumb and index finger won't push the center of gravity out of the sculpture's footprint. Printing I printed the…

Downloads
3,620
Likes
933
Rating
4.78
P
PrintablesBurt0n

Thug Life / Gangster Glasses

Thank you SV3D for the model. I split the part to make it faster and easier to print. I printed it in matte black PLA and PETG on a textured, powder-coated print sheet. The parts fit perfectly for me, but if they are a little loose, just…

Downloads
3,407
Likes
694
Rating
4.62
P
PrintablesThroughmyeye

Moai Glasses Stand larger version

Needed a larger version to fit my glasses and this worked well

Downloads
3,290
Likes
548
Rating
4.98
P
PrintablesVC Design

Sunglasses Car Clip

The clip attaches securely to your vehicle's sun visor , providing a convenient storage location for your glasses without taking up extra space in the car. Its compact design keeps your sunglasses accessible while helping to prevent…

Downloads
3,186
Likes
784
Rating
4.5
P
PrintablesGajowy

Sunglasses holder for sun visor in car

Simple sunglasses holder for sunvisor in car, printed with The Filament HT-PLA to prevent deformation in the sun.

Downloads
3,151
Likes
774
Rating
4.8
P
Printablesarcanelayers

Sunglasses Car Visor Clip V2

Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to…

Downloads
2,880
Likes
228
Rating
4.67

Individual Nametag for glasses and cups (Wedding Decor)

With this model you can easil print your own name tag and attach it to your glass or mug. Ideal for any party or wedding. No more mixing up drinks. Ideal for seating arrangement. Customizing Nametag If you haven’t Fusion360 you can open…

Downloads
2,834
Likes
432
Rating
4.87
P
Printables2B-3D

Glasses stand

Basic glasses stand that can hold up to three pairs. There are two version: one for narrow glasses that can fold and occupy little space (as the pictures ones); the other for larger frames so that the majority of models can fit. There's…

Downloads
2,813
Likes
323
Rating
4.82
P
PrintablesCrazy3D

Gnome (supportless) Glasses Holder

Gnome (supportless) Glasses Holder If you like it --> press like it :-) I remixed the awesome model Gnome ( Supportless ) which was designed by BODY3D . I made the beard wider and added a cutout for the glasses, but also you can find the…

Downloads
2,764
Likes
507
Rating
4.95

Rugged Glasses Box

Rugged Glasses Box The box is printed Print-in-place The locks are printed separately and click onto the top of the box. The dimensions of the box are in the picture, measure your glasses first. If it is small, scale all parts equally in…

Downloads
2,759
Likes
1,100
Rating
4.76
P
PrintablesWilko_SLO

Anti-dust Glasses Organizer

Print with PLA or PETG without support. I printed Z=0,3 started with white color and changed to green on Z=1,1 Use double side glue to fix it on the wall.

Downloads
2,669
Likes
328
Rating
4.33
P
PrintablesMelmac Alpha

Glasses and sunglasses holder for Ikea Skadis

A remix of the (sun)glasses holder by @masimplo_77234 for the Ikea Skadis pegboard using the awesome T-Clip system by @LineArcLine . Printed with PLA, 0.2. No supports needed. I printed the t-clips with 4 perimeters and 20% infill for…

Downloads
2,543
Likes
434
Rating
4.91
P
Printablestomasjuri

Sunglasses holder for Tesla Model 3 or Y

Sunglasses holder for Tesla Model 3 or Y. Print in PETG so it can withstand high temperatures inside a car.

Downloads
2,542
Likes
314
Rating
4.92
P
Printablescecca_7

Glasses case

Fix with glue the two case parts Then insert the scroll blind as in the GIF

Downloads
2,457
Likes
566
Rating
4.83
P
Printablesrorys3D

Party glasses - 2024

A model of funny glasses for celebrating the arrival of the new year 2024. Printing: Print takes a little over 2 hours and I reccomend to use color-change during print, e.g. first 3 layers with one color and rest with black color. But of…

Downloads
2,397
Likes
317
Rating
4.84
P
PrintablesCrazy3D

Gnome Glasses Holder

Gnome Glasses Holder If you like it --> press like it :-) I remixed the awesome model Gnome Vase Mode Ready which was designed by NorbertCierpicki . Now the gnome can hold your glasses! Would be happy to see your makes.

Downloads
2,377
Likes
432
Rating
4.92
P
PrintablesSD-3D

Glasses Stand (Gyriod Lattice Structure)

This is an updated version of my original minimalist Glasses Stand. I wanted a design that was complex and bold while still being a practical model that could be used every day. The gyriod structure is mesmerising to look at and is also…

Downloads
2,377
Likes
527
Rating
4.95
P
PrintablesNix

Skull Bowl Glasses Holder mod for Slotty Storage connector

A remix to integrate TotallyAddicted 's very cool Skull Eyeglass and Change Holder with a connector for Mike 's excellent Slotty Modular Storage System . Additional credit to Mocodroid whose model provided the lower jaw

Downloads
2,366
Likes
358
Rating
4.82
P
PrintablesIoGus

GLASSES HOLDER

Ho creato questo porta occhiali per poter fare fotografie espositive, per esporre gli occhiali in vetrina o semplicemente per riporli a fine giornata, senza rischiare di graffiarli o rovinarli. Durata stampa 54 minuti; Altezza Layer 0.3…

Downloads
2,205
Likes
285
Rating
4.96
P
PrintablesDavid Holecko

Sunglasses Holder for 4 Glasses

wall holder: https://www.printables.com/model/1293915-sunglasses-wall-holder-for-4-glasses

Downloads
2,169
Likes
305
Rating
4.84
P
Printablessbuerger

Eye training glasses - pinhole glasses

This is a special set of (glassless) glasses, intended to be used for training your eyes' ciliary muscles (these are the muscles that focus your eyes on different object distances) to avoid or even heal visual defects (lifestyle diseases)…

Downloads
2,111
Likes
254
Rating
4.88
P
Printablesrorys3D

Party glasses - 2025

A model of funny glasses for celebrating the arrival of the new year 2025. Printing: Print takes about 1h47min on MK4 and I reccomend to use color-change during print, e.g. first 7 layers with one color and rest with black color. But of…

Downloads
2,099
Likes
455
Rating
4.88
P
PrintablesDoomMeister

Granny Glasses

Print in purple or your favourite colour. There are 2 sizes of arm, 100mm and 125mm. 100mm seems to fit the young'ns I made these for and 125mm is about the same size as an adult pair of glasses but you can of course scale these to other…

Downloads
1,991
Likes
204
Rating
5
P
PrintablesJ0kers

Minimalist eyeglasses holders (4 variants)

I created this model, and its variants, for the " Eyeglass Holders " contest hosted here on Printables. I had in mind a simple shape where I started from a rounded-top prism and worked from there. I've then proceed to add a channel to…

Downloads
1,903
Likes
436
Rating
4.86
P
Printablesmonrojk

thug life glasses

They're a celebrated image in the world of memes

Downloads
1,891
Likes
663
Rating
4.84
P
Printablesllanterner

Prusglasses

IMPORTANT, PRINT THE FIRST LAYER VERY SLOW SO THAT THE HEXAGONS SLEEVE WELL. Gafas de sol con los hexagonos tipicos del relleno “honeycomb” caracteristicos de Prusa. Estas gafas estan hechas para el concurso kit cards y las sujeciones al…

Downloads
1,864
Likes
580
Rating
4.9
P
PrintablesFlyingPurpleCow

Harry Potter Glasses

My son needed glasses for his Harry Potter costume, so I re-designed these to fit his head. The hinges use 3mm bolts, at least 18mm long, to hold them together, and they can fold when not in use.

Downloads
1,843
Likes
166
Rating
4.53
P
PrintablesJim 248

Harry Potter Glasses

These are two color Harry Potter glasses. The scar is done as an inlay. There is a text document discussing how this is done. This is a remix of the one by Makerlabarautomation. My design allows for two color printing without dual…

Downloads
1,817
Likes
170
Rating
4.89
P
Printablesrorys3D

Party glasses - 2026

3D model of party glasses for celebrating the arrival of the new year 2026. Printing: Print takes about 1h12min on CORE One and I recommend to use color-change during print, e.g. first 7 layers with one color and rest with black color.…

Downloads
1,799
Likes
209
Rating
4.94
P
PrintablesDusBus

Sunglasses holder (for Honeycomb Storage Wall)

This remix is supposed to be used with the absolutely fantastic design Honeycomb Storage Wall by RostaP Since I am using their design as a place to store my EDC and other bits and bobs, I came up with this simple design in order to store…

Downloads
1,788
Likes
406
Rating
4.82
P
PrintablesMich

Glasses Broken Frame Replacement

Suppose your favorite glasses are broken. Usually this is frame, temple or - most likely - the hinge. But the lenses are OK. But hey - we have our 3d-printer and enjoy 3d design and printing. Let's design and print our glasses using the…

Downloads
1,735
Likes
260
Rating
5
P
PrintablesAcho3D

Glasses case

Glasses case. No supports. Glue four little magnet under edges for better close. Print instructions Unassociated tags: glasses accesory Category: Glasses Summary Glasses case. No supports. Glue four little magnet under edges for better…

Downloads
1,730
Likes
221
Rating
4.78
P
Printablespyrho // 25.wf

Glasses Gridfinity module

Store up to 3 sunglasses with style with this module. I've also included a 4x1 version that holds just 1 pair. Magnet cutouts have a diameter of 6.1mm and a depth of 2mm; good to friction fit 6x2 magnets. This module is part of my Vide…

Downloads
1,728
Likes
244
Rating
4.9
P
Printableskosteklvp

Lady Beatrice Squintsworth Glasses Holder

This is a Lady Beatrice Squintsworth Glasses Holder. It works well with any glasses or sunglasses. Looks great on a desk or night stand. Recommended print settings layer height: 0.2 mm infill: 10% gyroid perimeters: 3 supports: no…

Downloads
1,723
Likes
250
Rating
4.97
P
PrintablesFergyMcFerguson

Skull Glasses Holder and Change Bowl

Skull glasses holder and change/pocket bowl for your night stand. Used Prusament Pearl White PLA 0.2mm layer height MK4 with input shaping enabled Paint on supports / organic supports / For support enforcers only 10% grid infill (painted…

Downloads
1,698
Likes
251
Rating
4.86
P
PrintablesFrank

Glasses Kids

Printed some glasses for the kids. Print the glasses with the front flat on the bed. The legs with the sides flat on the bed. Use a needle/small screw to push into the holes. Print instructions Category: Glasses

Downloads
1,689
Likes
141
Rating
4.43
P
PrintablesNeolker

Cat Glasses

Christmas Cat Glasses just for fun

Downloads
1,665
Likes
410
Rating
4.9
P
PrintablesTater Zoid

Rugged Glasses & Magnetic Sunglasses Boxes - 3 Sizes

Description I created these 3 boxes to house my glasses and sunglasses when camping, hiking, biking, sleeping & car trips. As you can see, there are many uses, and I use them every day. There are also a lots of other uses besides holding…

Downloads
1,640
Likes
972
Rating
4.88
P
Printablesthehand18

Ray-ban glasses frames

"If you frequently break your glasses frames like me, then these Ray-Ban RB 8903-5262 frames are perfect for you. You can see in the pictures the comparison between the original frames and the 3D-printed ones. If you're interested in…

Downloads
1,637
Likes
167
Rating
5
P
PrintablesSergey Larionov

Thug Life Glasses (but printable)

0.2 layer height, print it in a flat orientation with top of the frame down on the bed

Downloads
1,617
Likes
393
Rating
5
P
PrintablesStamos

Aviator Sunglasses

This is a replacement frame for Rayban Aviator lenses (in case your original frame has been damaged). Filament (1.75mm) is used as pin for the hinge. You can use hot water or a heat gun (with caution) if you cannot insert the lenses. The…

Downloads
1,613
Likes
153
Rating
5
P
Printablestjjos

Lucky 13/Mini 13 Sunglasses

Just some cool sunglasses for Lucky 13 and Mini 13. UPDATE: The Lucky13 version no longer needs to be scaled down to 95%. I've updated the model to the correct size to provide a snug fit. Added a Mini13 version.

Downloads
1,606
Likes
292
Rating
4.57
P
PrintablesJonan Seeley

Print in Place Travel Sunglasses/Glasses Case

Travel Glasses Case with Carabiner/Lanyard Hole This fully printable case is designed to protect your glasses or sunglasses when you're on-the-go to the beach, pool, or wherever else you may be going! It comes in three sizes to fit…

Downloads
1,605
Likes
451
Rating
4.83
P
PrintablesToolsToMars

Safety Glasses Holder

Safety Glasses clip for wherever you need to keep them handy. Remix of https://www.thingiverse.com/thing:2954156

Downloads
1,595
Likes
253
Rating
4.91
P
PrintablesGLeZz

Glasses case (rework of Jasoncanning design)

This is NOT a remix of an amazing Jasoncanning case: https://www.thingiverse.com/thing:2578431 since I did not use any original files just the picture as reference. This is complete rework with slight changes. The case is printed in place…

Downloads
1,563
Likes
327
Rating
4.62
P
PrintablesBoogie

Glasses holder

Glasses holder Screw size 4mm

Downloads
1,534
Likes
216
Rating
4.8
P
Printablesrorys3D

Bobble HAPPY BIRTHDAY glasses

HAPPY BIRTHDAY glasses with funny bobbling letters. Fits on Prusa MINI (see the last picture). If you want “MERRY CHRISTMAS” glasses you can find it here https://www.printables.com/model/669553-bobble-merry-christmas-glasses. Short…

Downloads
1,514
Likes
175
Rating
4.85
P
PrintablesMonster Made

Halloween Glasses

Print with PLA 0.2mm QUALITY Infill 15% Bed Temperature 70 for without printer enclosure No support needed Printing orientation please check with gcode file

Downloads
1,505
Likes
449
Rating
4.67
P
PrintablesDionarap

Tough life / Deal with it Glasses

Easy to print Glasses, no support is needed. For the hinge use a bit of filament, if you have the 1.85mm one. Else print the pin and use that. The glare should fit snug in the cutout of the glasses. for best result, press the glare in…

Downloads
1,500
Likes
694
Rating
4.95
P
PrintablesLuka

Glasses holder

Layer height 0.2. Infill 25%. No support.

Downloads
1,473
Likes
161
Rating
5
P
PrintablesVivero

2026 New Year Glasses

Print flat with supports. 0,15 or 0,2mm layer height. Use the “MM” files for multi material printing.

Downloads
1,455
Likes
91
Rating
4.92
P
PrintablesRhylo Night

Customizable fursuit glasses: Round style

Introduction: This is a round glasses frame designed for fursuit heads with lots of customizable options! Upadte (2023/11/19): The code has been improved so the visualization runs faster. Added new parameters HingeHeight and BridgeHeight.…

Downloads
1,434
Likes
125
Rating
5
P
PrintablesNustiu Nimic

Glasses frame

My old glasses broke so I was left with no option but to build my own. First time working in fusion 360. I hope this helps someone speed up their process. Cant go without glasses for more than one day Printer: Prusa mini+ Infill: 80%…

Downloads
1,376
Likes
173
Rating
4.5
P
Printablespauk

Reading glasses stand

SETTINGS Face Default size: 132,2 mm x 172,5 mm x 10 mm Filament: PLA White by AzureFilm Nozzle: 0.4 mm Layer height: 0.2 mm Walls: 2 Bottom: 3 layers Top: 4 layers Print speed: 60 mm/s Infill: 15% Infill speed: 65 mm/s Supports: no…

Downloads
1,375
Likes
288
Rating
5
P
PrintablesNolan3D

Cat Wearing Sunglasses Keychain

Elevate your style with the "Cat Wearing Sunglasses Keychain," a trendy accessory that combines the charm of a cute feline with the coolness of sunglasses. This eye-catching keychain is perfect for cat lovers, fashion enthusiasts, or…

Downloads
1,357
Likes
340
Rating
5
P
Printablesbatman

Happy Birthday Glasses

Happy Birthday Glasses. I wanted to make my son's birthday special so I found a glasses design and customized it in Tinkercad. The original design can be found here . As stated on the original design: Front face has to be printed as flat,…

Downloads
1,353
Likes
133
Rating
4.75
P
PrintablesTprints

Shot Dispenser for 6/5/4/3 glasses

Function The reason why it works is a double tunnelsystem per tube. First the liquid goes only trough the small pipes, so the chamber gets filled. Due to the hydrostatic pressure in the full chamber, all exits get the same amount of…

Downloads
1,345
Likes
129
Rating
4.9
P
PrintablesCisco3D

Safety Glasses

Use at your own risk, lol

Downloads
1,344
Likes
242
Rating
5
P
PrintablesBrombeerkralle

Brillenhlater Pinguin / Glasses Holder Penguin

Mein erstes kreatives 3D-Projekt: eine dekorative Ablage für meine Brille. Ich empfehle eine sehr feine Layer Height für eine möglichst glatte Oberfläche. Meinen Prototypen habe ich noch ziemlich lange mit Schleifpapier bearbeitet.…

Downloads
1,337
Likes
176
Rating
5
P
PrintablesDennisP

Glasses holder

This is a holder for your glasses which you can put next to your bed to keep everything nice and organized :) this model consists of 3 parts, the base and 2 different trays. (you can choose the combination of trays but i suggest you put…

Downloads
1,336
Likes
508
Rating
5
P
PrintablesThe best stork

Glasses arms

To replace the arms of your glasses ... maybe this model can do it (and save you the time to go to the optician) :D Print in less than 20 minutes @ 0.15mm Remix from “ericsko” tuned with onshape

Downloads
1,322
Likes
64
Rating
5
P
PrintablesNagyBig

Glasses Party Glasses

Go for V2 rather: https://www.printables.com/model/869562-v2-party-glasses-use-up-the-almost-empty-spools Short Video : https://youtube.com/shorts/EPEGvbKIh5A Perfect to use up the almost empty spools! Give it out on parties, it's a great…

Downloads
1,305
Likes
99
Rating
4.89
P
PrintablesCrazy3D

Dr Smolder - Glasses Holder (or just Dwayne Johnsons / the Rock head as sculpture)

Dr Smolder - Glasses Holder (or just his head as sculpture) If you like it --> press like it :-) I remixed the model Dr. Smolder Bravestone - Dwayne Johnson which was designed by 14JS-studio . There are two variants, one which is only the…

Downloads
1,305
Likes
244
Rating
4.86
P
PrintablesMajorOCD

Halloween Glasses

My daughter designed these for Halloween and I modeled and printed them.

Downloads
1,304
Likes
255
Rating
4.96
P
Printableszeroflow

Dog Glasses Holder

Needed parts: M4 Tap 2x M4 Screws, 8..15mm acceptable Instructions Print as oriented, no supports necessary Remove sacrificial hole pattern where the nose part will mount Tap the hole in the Nose and the Body part with an M4 Tap, but make…

Downloads
1,302
Likes
335
Rating
4.89
P
PrintablesPyromanprod

Link&Co sunglasses holder

Summary Introducing the Link&Co Sunglass Holder: a sleek 3D model designed for easy sunglasses storage in your car. Simply attach it in yout car and slide your shades in for convenient access while driving. Say goodbye to fumbling for…

Downloads
1,275
Likes
229
Rating
4.79
P
Printablesflol3622

Glasses

3d printed fram for my glasses, prints flat, without support, the hinge works with a small piece of filament and a press fit. Pla works great, you can use a lighter to slightly warm up the sides to bend them a bit inwards. The profile is…

Downloads
1,219
Likes
189
Rating
4.75
P
PrintablesWakkie

Thuglife Glasses

Hello, Ive created these to test my own designed hinge. The hinges work and its wearable. Please let me know if it workes for you also;) Ive printed it on the Ender 3 v2 with PLA 0.3 layer thickness.

Downloads
1,206
Likes
183
Rating
4.89
P
PrintablesRobert Wallace

Nose glasses nose holder

This a glasses holder that looks like a nose the most natural holder for glasses. There is 3 versions 1 for just sitting on a desk, night stand, or other flat surface. There is one with circle magnets as well as one with rectangle magnet.…

Downloads
1,206
Likes
116
Rating
4.77
P
PrintablesMrSirChris

Universal Sun Glasses Clip Sun Visor

Recommended to print this model with PETG, ABS, or ASA. Any rigid temperature-resistant filament will work best.

Downloads
1,167
Likes
105
Rating
4.89
P
Printableslwezeman

Geometric Patterned Glasses Holder

Included g-code includes Hilbert Curve top fill and bottom fill, as well as ironing to produce a nice, smooth surface.

Downloads
1,141
Likes
252
Rating
4.75
P
PrintablesAleš Stárek
Downloads
1,139
Likes
151
Rating
5
P
PrintablesLele88

Povero Gabbiano Occhiali Glasses

The glasses are perfect to be used in the disco and at parties to attract the attention of the Girl! Success guaranteed !! Nobody will resist you !! XDXD I recommend printing it with a phosphorescent filament, so it glows in the dark.…

Downloads
1,125
Likes
24
Rating
3.5
P
Printablesgregor070504

Glassless glasses

Just a really fashionable pair of sunglasses without any lenses. Glasses can be seen on Instagram: https://www.instagram.com/p/CH3SW2lnlWS/?igshid=irk68767k4e3 Print instructions if (you want to print glasses with infill pattern instead…

Downloads
1,105
Likes
240
Rating
4.33
P
PrintablesMirkoFerronato

Girl with eyeglasses and lingerie Velma Dinkley scooby doo

Girl_with_eyeglasses_and_lingerie_Velma_Dinkley_scooby_doo

Downloads
1,082
Likes
75
Rating
0
P
PrintablesMonster Made

Christmas Glasses - Antlers

Print with PLA 0.2mm QUALITY Infill 15% Bed Temperature 70 for without printer enclosure No support needed Printing orientation please check with gcode file

Downloads
1,078
Likes
374
Rating
4.76
P
PrintablesDreddpunk

Skadis Glasses holder

20% infill not any special settings 13.08.2023 adde new model for thinner Glasses

Downloads
1,077
Likes
250
Rating
4.42
P
PrintablesTrukku

Skull Glasses Holder

I came across a post where the subject of the post looked 3d printed, but the first comment I came across was someone looking for the stl. Neither of us could find it, so I decided to fix that. I'm comfortable with Fusion 360 (even though…

Downloads
1,076
Likes
116
Rating
5
P
Printables3DVJ Models

Hexagonal/Standard Sunglasses Car Clip - No Supports!

Do NOT print this in PLA, Use a high temperature resistant material for best results and longevity! (Recommended: ABS, ASA, etc. PETG will work but will deform over time, especially in hotter climates) Best suited for thicker frame…

Downloads
1,071
Likes
163
Rating
5
P
PrintablesHenki71

Glasses holder for 4 glasses

Just a simple holder for up to 4 glasses. You can use screws to mount the holder or, as in my case, use double sided gluetape to fix it. I printed it in TPU with 100% infill. PLA should work aswell. Update: Added a version with longer…

Downloads
1,037
Likes
110
Rating
5
P
PrintablesDavid Finn

Brush Holder clip for glasses

Clip that can be attached to glasses to allow brushes to drip off without damaging the brush tip. The clip is flexible and can be attached to any glass. The brush is held in the holder by its center of gravity and can be easily removed…

Downloads
1,036
Likes
606
Rating
4.88
P
Printableskorniton
18+

The source marked this model as adult content.

Downloads
1,033
Likes
227
Rating
3.5
P
PrintablesPrecisionPrints

Dummy 13 Sunglasses.

I remixed this model→original creator:Kaleb08

Downloads
1,029
Likes
174
Rating
5
P
PrintablesUWcharlie1983

Sunglasses

— Link to my other design: Half Rim Sunglasses — Features: Designed to use Oakley Gascan lenses Printed to lens & face curvature, no need for inexact heated frame bending Print in place hinges make for simple one piece print with no frame…

Downloads
1,023
Likes
111
Rating
4.83