Search results: headlamp

Sort order

241 models

P
PrintablesAMPDesignworks

Black Diamond Storm 400 LED Headlamp Latch Replacement (now includes lever too)

My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
1,194
Likes
28
Rating
4.5
P
PrintablesPaul

Headlamp Backpack Clip - Skilhunt H04 RC Mini

It's best to print in PET or ASA for strength, but my first print was in PLA and worked for initial testing just fine. Put on a backpack strap, molle, or even a belt loop. You might also enjoy: Skilhunt Flashlight Magnetic Charging Stand…

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant

Downloads
155
Likes
87
Rating
0
P
PrintablesJRustebakke

Battery Clip for Osprey Headlamp-600 Lumens

the battery clip on y Ospry Headlamp 600_Lumen broke. instead of sending it off for repair, I was able to print an exact replica. This battery holder clip is a direct replacement for the Osprey Headlamp-600 Lumen. I recommend using PETG…

Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
1
Rating
0
P
Printablesjacus99

Black Diamond Storm 450 LED Headlamp Latch Replacement

I modified the 400 series latch file to match the 450 series. Printed on Ender 3v2 with brim and support touching buildplate, overhang angle 59°. Layer height 0.16mm and infill 100%. I set the supports touching the print and removed it…

Downloads
1,108
Likes
21
Rating
4.5
P
PrintablesZenfunk

Replacement Cover For Headlamp Washer Opel/ Vauxhall Astra H

I ran into some snow in winter and lost the right cover of my headlamp washer. There seem to be two versions of washer covers out there and when I ordered a replacement, I always got the wrong one. 3D printing to the rescue... It was…

Downloads
756
Likes
54
Rating
4.33

VW Golf Mk4 Headlamp washer cover

These covers are always get stolen. So instead of buing new ones, i decided to create, and print them. For best results print upright (like the models) if no the barkets will be to fragile. Print Settings Printer: GeeeTech I3 pro B Rafts:…

Downloads
470
Likes
28
Rating
0
P
Printablesshevron

OpsCore ARC Helmet Goggles / Headlamp Attachment

Hook for attaching the strap of a headlamp (such as a Petzl headlamp) or goggles to the Opscore ARC rail of a tactical helmet. Attach one hook on each side of the helmet ARC rail with the hook facing forward, then adjust the strap length…

Downloads
365
Likes
58
Rating
0
P
PrintablesEnjoyneering

Headlamp Holder

Replacement bracket for folks flashlight. Print details: Number of walls 3 (for strength), layer height 0.2 mm, filling 25%, no supports.

Downloads
318
Likes
50
Rating
5
P
PrintablesKuro Man Kuro

Hard Hat headlamp strap and pencil/penlight holder

I was needing a mount to hold a headlamp on my hardhat, but the original version had a painfully thin 1-2 layer thickness for the headlamp holder that I didn't think would last. I increased the thickness, while still maintaining the…

Downloads
305
Likes
44
Rating
5
P
Printablesaraymbox

Kia Headlamp Dust Cap

Created this replacement headlamp dust cap for a Kia Cee'd 2006. Should also fit in these models: Sportage 2010 Sorento 2006 Carens 2006 Sedona 2006 Seele 2012

Downloads
288
Likes
43
Rating
0
P
PrintablesPetr Kašpar

Audi A4 B6 headlamp back cover (non Bi-xenon)

Replacement headlight covers… Print it out, insert the original seal and snap it onto the headlight.

Downloads
280
Likes
25
Rating
0
P
Printablesntebis

Hyundai i30 PD Headlamp Remover

Did you try to replace your lightbulb in your shiny i30 and find out that you can't get a good grip to unlock the lightbulb? Introducing the i30 Headlamp remover! The headlamp remover allows to get a better grip to the headlamp assembly…

Downloads
275
Likes
24
Rating
0
P
Printablesfelix^w

Hella 147 353-00 Replacement Headlamp Dust Cap for VW/Audi/Mercedes

Headlamp dust cap replacement for my car. Print Settings Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: Colorfabb PETG/nGen Notes: Print with full support. Post-Printing ============= Carefully clean up all the support…

Downloads
218
Likes
8
Rating
0

Replacement Clip for Black Diamond Cosmo-R 350 Headlamp

This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…

Downloads
200
Likes
4
Rating
5
P
PrintablesXirabolt

Milwaukee Headlamp Bracket 42-36-0215

Update 3/2/2021: Modified grip, seems to hold better now. Considering this 'complete' Replacement bracket for Milwaukee 2111-21 Headlamp (and similar), service part 42-36-0215 . This is not 100% accurate, I had to guess some dimensions of…

Downloads
191
Likes
12
Rating
5
P
PrintablesMusa Wilmar

3D Printed Street Fighter Headlamp

Full 3D printed Street Fighter-style motorcycle headlamp, Inspired by Ducati Headlamp. Using Devil Eye Animated LED and Mini projector lamp. I print it using ABS filament but u can use other material that can survive in the hot…

Downloads
190
Likes
17
Rating
0
P
Printablesnullrails

LED Headlamp Holder for Dragon F7 Locomotive

This a 3mm LED holder for the headlamps in rambros ' excellent EMD F7 model for Dragon Railway . The original headlamp lenses still fit in front. It snaps in and is pretty tight but I glued it in anyway.

Downloads
190
Likes
18
Rating
0
P
PrintablesKORN3L

Hard hat clip for headlamp strip

Headlamp band holder for MSA V-Guard 500 hard hat.

Downloads
178
Likes
17
Rating
0
P
Printablesspiderculture

Headlamp Base Replacement - For Skilhunt HB3

This is a replacement part for the Skilhunt HB3 headband that typically comes with the H04, H150, H200, and H300 headlamps from Skilhunt / ESKTE. This part should work with the other Skilhunt headlamp adapters you may find on Printables,…

Downloads
176
Likes
19
Rating
5
P
PrintablesNeuralhub

Wurkkos HD15 headlamp mount

The headlamp mount for the Wurkkos HD15 flashlight. With this mount, it is much faster and more convenient to mount the lantern on it. It is attached with a click and holds securely. The ribs on the mount do not allow the lamp to move. It…

Downloads
162
Likes
27
Rating
0
P
Printablesbuho29

clip headlamp construction helmet

one clip/holder for construction helmet suporting headlamp stop using cable tie and stop recharging the helmet on the nightstand! Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No Resolution: 0.4…

Downloads
159
Likes
22
Rating
5
P
PrintablesTodd Ferrante

Black Diamond headlamp detent repair

My Black Diamond headlamp had a bracket with two fingers that let the tilt adjustment click into place. The fingers broke off and the light would flop down. I used scotch tape to hold the angle for a couple years. Then I printed a TPU…

Downloads
156
Likes
10
Rating
5
P
PrintablesplationiX

Hard hat headlamp clip

Print on side with snug supports enabled

Downloads
154
Likes
12
Rating
0
P
PrintablesPetr Kašpar

Audi A4 B6 headlamp back cover Bi-xenon

Replacement headlight covers… Model created by redrawing a 3D scan of the original cap Print it out, insert 6x hot nut M3x5x5 + 6x M3x8 screw and insert the original seal and snap it onto the headlight.

Downloads
150
Likes
13
Rating
5
P
Printablessponplate

Petzl Actik Headlamp part

Fix if you broke this strap holder part. 10 minute print on standart settings on bamboo P1P

Downloads
142
Likes
11
Rating
5
P
PrintablesSkoolieDweller

Hardhat Headlamp Clip

I needed a way to keep my headlamp from sliding off my hardhat.

Downloads
142
Likes
6
Rating
0
P
PrintablesDiederik

Honda CB 50 Headlamp case

Reverse engineered headlamp case for Honda CB50 Built from scratch in Fusion 360 for an accurate fit ; No 3D scan Surfacing is an approximate reconstruction of the original, not 100% accurate but fairly close Replacement for Honda nr…

Downloads
141
Likes
17
Rating
4
P
PrintablesNilz

Volvo S40/V40 headlamp adjustment pin

The original part is known to fail, causing the headlamps to rock back and forth horizontally while being unable to adjust it anymore. This will almost certainly cause the vehicle to not pass inspection. I've modelled this part based on…

Downloads
135
Likes
10
Rating
0
P
Printablestg73

Headlamps nozzle lighting for RatRig V-Core 4 Toolhead

NB: The photos are posed with a benchy from a different printer, my VC4 build is not complete yet. Printing Follow the standard RatRig printing guidelines here , and the part preparation instructions in the build guide here . BOM 4 x…

Downloads
131
Likes
43
Rating
5
P
PrintablesNeuralhub

Wurkkos HD15 headlamp mount v2

This is a new version of the mount for the Wurkkos HD15 flashlight. The new version does not use m3 bolts. Instead, one part is forcefully inserted tightly into the other, and the mount remains collapsible. If necessary, you can fix the…

Downloads
128
Likes
20
Rating
5
P
PrintablesMahmoud Salah

Kia Rio 3 Headlamp Dust Cap

a headlamp dust cap for kia rio 3

Downloads
127
Likes
8
Rating
0
P
Printablesfo43

HO Thomas and Friends Headlamps

Headlamps based on those used in the model series. Two of the files have channels that exit either out the back or through the bottom so you can add a tiny lightbulb to it and there is one solid version as well. Category: Vehicles

Downloads
127
Likes
11
Rating
0
P
Printables_wampa_

Black Diamond Spot headlamp hinge replacement

Replacement for the hinge part on the back of the black diamond Spot headlamp as mine broke. Print in PETG with 100% infill.

Downloads
115
Likes
3
Rating
5
P
PrintablesJiri Bay

Decathlon Evadict Ontrail 900 Headlamp battery holder replacement

Relacement part for the Decathlon Evadict Ontrail 900 Headlamp. 3D model of the rear part acting as a battery holder.

Downloads
106
Likes
2
Rating
0
P
PrintablesKiko64

headlamp plates

headlamp plates, different versions uchyt celovky, rozne verzie

Downloads
93
Likes
9
Rating
5
P
PrintablesTomas Rendek

Petzl headlamp helmet clip

Petzl headlamp helmet clip

Downloads
88
Likes
14
Rating
0
P
PrintablesSpicy3d

Wurkkos HD10 Headlamp Mount for Skilhunt HB3 Headband

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Wurkkos HD10 mount snaps right into the Skilhunt HB3 headband! Works with Wurkkos HD10 series headlamp. The width of the mount is made to fit…

Downloads
85
Likes
10
Rating
0
P
PrintablesJosef Kmínek

Headlamp nut Octavia II WHT 000 264

M8x1.0 Nut For headlamp Octavia 1Z (nFL) Print Settings Printer Brand: Anycubic Printer: All-metal Mega **Rafts:** Doesn't Matter Supports: No **Infill:** 90-100% Category: Automotive

Downloads
83
Likes
7
Rating
0
P
PrintablesJohnDoe993

Sofirn Headlamp Bracket(modular)

This 3D model provides a replacement mount for the Sofirn HA05 headlamp with a modular design. The modular system allows the individual holders to be printed separately and easily replaced if one breaks. Key Features: Modular Design: The…

Downloads
82
Likes
17
Rating
0
P
PrintablesSpicy3d

Skilhunt H150 Headlamp Mount for Skilhunt HB3 Headband

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Skilhunt H150 mount snaps right into the Skilhunt HB3 headband! Works with Skilhunt H150 series headlamp. The width of the mount is made to fit…

Downloads
81
Likes
9
Rating
0
P
Printablesamzoo

Battery Holder for Headlamp

I wanted a way to store my batteries out of my headlamp to keep them from corroding. I kept losing them, ziplocs let them jostle around. I really liked Larry Guo's simple design, so I added some features that I thought were necessary,…

Downloads
79
Likes
25
Rating
0
P
PrintablesSammysHP

Unibody headlamp clip

Clip to attach a right angle headlamp to a headband in a single body. Requires only a (20 mm) textile elastic band. The pocket clip can stay on the light. This is mostly a template for FreeCAD that you can adjust to fit your own…

Downloads
74
Likes
17
Rating
0
P
PrintablesFuWeissinger

Bike headlamp mount suitable for Sofirn SP40/HS40 HS 20 HS 40

Here is my holder called "The Forehead Beacon Tower" 🤪 After two mountain bike tours in the darkness with smartphone LED, I decided to buy a cheap but very good headlamp. In this case it is a Sofirn SP40 with 1200 lumens. I fits perfectly…

Downloads
73
Likes
16
Rating
0
P
PrintablesSimon

Headlamp Helmet Clip

Designed for Poc Obex Spin helmet and Petzl Actik Core lamp with 25mm strap. Clips into the helmet ventilation and also workes in combination with ski goggles. Can be stored away below the earpiece. Improve print quality with the option…

Downloads
70
Likes
12
Rating
0
P
PrintablesChrido

Flashlight Diffuser for Armytek Wizard C2 Pro Headlamp

This 3D printed diffuser is designed to fit the Armytek Wizard C2 Pro headlamp and is perfect for camping or other outdoor activities. It attaches easily to the headlamp by simply clicking it on, and provides a soft, diffuse light that is…

Downloads
69
Likes
16
Rating
0
P

2008-2012 BMW F800GS LED-compatible headlamp caps

These are caps for the 2008-2012 (pre-facelift) BMW F800GS, with enough room to fit LED headlamp bulbs with built-in heat sinks. I designed these because the other model floating around totally didn't fit my (2009 model year) bike, the…

Downloads
68
Likes
8
Rating
0
P
Printablesfirstgizmo

Nitecore HC65 Headlamp Head Strap

This part replaces the headrest on the Nitecore HC65 headlamp. Its function is exatly same as the original. Printing: The SidePieces are to be printed from flex material. Made mine from TPU 98A and it works verry well. The Headrest is…

Downloads
65
Likes
10
Rating
0
P
PrintablesNorseEngineer

Specialized Stix to Headlamp Adapter

I'm an avid cyclist, and my rear light of choice is the Specialized Stix ( https://www.specialized.com/us/en/stix-elite-2-taillight/p/173394?searchText=49120-2100&color=270193-173394 ). These have multiple light modes, are bright, and…

Downloads
65
Likes
3
Rating
0
P
Printablesapparle

Duracell Headlamp Backplate

Reupload of https://www.thingiverse.com/thing:4681860 made by j_conlan1970 @j_conlan1970, if you ever upload this on printables, let me know and I'll remove this upload.

Downloads
64
Likes
6
Rating
0

Dacia Duster - protection against accidental ejection of the headlamp height adjustment bowden

EN: Did you also happen to dig out the bowden, which is used to adjust the height of the headlamps, while changing the bulb in the headlamp? With this cover, that won't happen to you. Print without supports. CZ: Taky se vám stalo, že jste…

Downloads
63
Likes
19
Rating
0
P
PrintablesVad Che

Magnetic and headlamp flashlight holder

flashlight holder model magnetic and for head wear quick release

Downloads
62
Likes
11
Rating
0
P
PrintablesSpicy3d

Sofirn HS10 Headlamp Mount for Skilhunt HB3 Headband

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Sofirn HS10 mount snaps right into the Skilhunt HB3 headband! Works with Sofirn HS10 series headlamp. The width of the mount is made to fit between…

Downloads
62
Likes
9
Rating
0

Volvo S60 Headlamp Wash Cap Holder

Print verticaly or horizontally with supports (stronger). Use weather resistive material - PETG, ASA, etc.

Downloads
61
Likes
7
Rating
0
P
PrintablesVibu tn

Cheap chinese headlamp holder for bike

Cheap Chinese lamp holder. Lamp from aliexpress is around 1-3$ so you will not get stressed when lamp is snatched off.

Downloads
61
Likes
33
Rating
0
P
PrintablesGunbleR

Headlamp mount replacement

Made for this Headlamp: https://www.aliexpress.com/item/1005001315358779.html Mount broke quickly on both flashlights. Printed upside-down, with pins towards the top, for the main curve to be smooth Print Settings Printer: Prusa Mini+…

Downloads
60
Likes
4
Rating
0
P
PrintablesGunbleR

Another Headlamp mount replacement

Another headlamp mount. Printed upside-down, with pins towards the top, for the main curve to be smooth Print Settings Printer: Prusa Mini+ Supports: Yes Resolution: 0.20 Filament: Creozone PETG

Downloads
60
Likes
4
Rating
0
P
PrintablesSammysHP

ZebraLight H52 headlamp clip

The original ZebraLight silicone mount that comes with their headlamps works, but not great. One of its biggest issue: It is hard to attach and remove the flashlight from the mount. It takes time. This is a customized version of my…

Downloads
59
Likes
7
Rating
5
P
PrintablesKytor

Nitecore HC30 Headlamp Headband Strap Mount

I would recommend printing in PETG or Polycarbonate.

Downloads
59
Likes
12
Rating
0
P

Universal Tent Headlamp Hook/Holder

Thank you to tuxbobble for the first make on this model! If you print this, please post a make, leave a like, and comment. I would love to see someone else print this, and, get some feedback maybe. This Universal Headlamp Hook eliminates…

Downloads
59
Likes
22
Rating
5
P
PrintablesGette

Petzl headlamp mount replacement

replacement to use any simple headband for your petzl light

Downloads
56
Likes
4
Rating
5
P
Printablesmasařík

Replacement headlamp mount

Model of the mount for the Solight WN32 front LED headlamp. Reinforced thickness. I recommend printing with the support side facing the heated bed. After printing, it's necessary to sand off the remaining supports. In my case, PETG and/or…

Downloads
55
Likes
4
Rating
0
P
Printablesmoebius

Headlamp holder replacement led lamp

v8 has a larger base and is more comfortable to wear - even more comfortable than the original holder.

Downloads
55
Likes
6
Rating
0
P
Printableskrausgedruckt

(Modified) Radiator Grille External To Headlamp Nut (GM #3999700)

This is a modified version of the „Radiator Grille External To Headlamp Nut“ from General Motors, part number #3999700. The part is discontinued and no longer available. I needed replacements for the brittle original ones of my 1982…

Downloads
50
Likes
6
Rating
0
P
PrintablesSammysHP

ESKTE (Skilhunt) H150 headlamp clip

This is a customized version of my unibody headlamp clip specifically for the ESKTE (Skilhunt) H150 . You can use the official elastic band if you cut off the smaller buckle, sew the end into a loop and use the buckle to connect both…

Downloads
50
Likes
4
Rating
0
P
Printables3dloh

Headlamp right-angle lamp headstrap quickrelease mount

A lot of currently available headlamps share the same type of mounting on the headstraps. The mount consists of a couple rubbery rings that have to slip over the body of the lamp. This is ok for a one time task, but if you want to use the…

Downloads
50
Likes
12
Rating
5
P
PrintablesJankes

Sofirn H25S headlamp mount

Replacement mount similar to original one. Use supports.

Downloads
49
Likes
4
Rating
0
P
Printablesmike2194

NIU KQi3 Headlamp Cover

I printed with PLA. Works fine, probably better with PETG. Settings: (as shown) Fill Density: 15% Fill Pattern: octogram spiral Length of Infill Anchor: 600% Max Length of Infill Anchor: 50mm Top Fill: monotonic Bottom Fill: monotonic…

Downloads
49
Likes
4
Rating
0
P
Printableswebpirat

Headlamp Helmet Clip

Secures the headlamp to the helmet

Downloads
48
Likes
6
Rating
0
P
PrintablesAk-Adventurer

Wurkkos HD15 Headlamp Mount Remix

Thought the plate was thicker than needed, and I don't use the top head straps(they are all too short for my fat head!), so I thinned out the plat, and clipped the top loop off. Not the most streamlined job(lost some round overs) but it…

Downloads
48
Likes
12
Rating
5
P
PrintablesInterestingGap

Fenix HL30 Headlamp Holder

The holder for my Fenix HL30 headlamp started to crumble down, so I made a new holder for it. It is not in any way an exact replica of the original holder, but it does the job. I also added 2 button covers, so the light doesn't gets…

Downloads
47
Likes
3
Rating
3
P
Printablesdavid.d59

3xAAA battery holder for headlamp

This is a compact design for 3 AAA Batteries. I use it for the replacement batteries of my headlamp. Just throw it in your backpack and forget about it until you need it. The design is greatly inspired by this great battery case from…

Downloads
46
Likes
12
Rating
5
P
PrintablesPaul3D

Hyundai SantaFe headlamp washer - WIP

Work in progress Headlamp washer nozzle missing. Needed quick for MOT, I presumed missing/non working washer would result in failure. So I modelled in fusion, printed out and fitted. Car passed… This version is slightly too large and…

Downloads
46
Likes
4
Rating
5
P
PrintablesSpicy3d

Skilhunt HB3 Headband Mount for Zebralight H53 Headlamp

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H53 or H503 mount snaps right into the Skilhunt HB3 headband! Works with H53 and H503 series headlamps. There's is a conformal design…

Downloads
46
Likes
4
Rating
0
P
PrintablesSammysHP

Skilhunt H04 RC Mini headlamp clip

This is a customized version of my unibody headlamp clip specifically for the Skilhunt H04 RC Mini . You can use the official elastic band if you cut off the smaller buckle, sew the end into a loop and use the buckle to connect both ends.…

Downloads
45
Likes
4
Rating
0
P
PrintablesPanchitoV

Emisar D2 minimalistic headlamp plate

My first design - minimalistic headband plate that uses single elastic cord to make use of the Emisar D2 as a headlamp. There are two versions: Longer version that accounts for the center of mass of the flashlight, making it more stable…

Downloads
45
Likes
11
Rating
0
P
PrintablesSammysHP

Headlamp clip

Simply attach a headlamp to the strap and quickly remove it. The pocket clip can stay on the light. This is an experimental design and although I had run a FEM on it I'm absolutely no FEM expert. The included design is for a Sofirn SP40…

Downloads
43
Likes
13
Rating
0
P
PrintablesAndy Forsberg

Magicshine LED headlamp mount for Giro Edit Helmet

This is an adapter that allows you to mount a Magicshine LED headlamp to the gopro mount included with a Giro EDIT helmet. It would probably work for most similar helmet mounts. This mount places the light higher and closer in than my…

Downloads
42
Likes
0
Rating
0
P
PrintablesNathan

Headlamp Strap Fastener

For my ALDI Headlamp i needed a new fastener, because the original one broke. Print instructions printed in PETG

Downloads
42
Likes
2
Rating
0
P
Printablesaccount

Headlamp Adapter (adjustable angle) for Olight i1R 2 EOS & PRO keychain light.

You will need: 3mm shock cord. either: a single 16mm or two 8mm M3 screws. optional: you can pick up some 2mm eva foam with an adhesive back to cushion it a bit. It is for these: The one in the picture is the i1R 2 EOS . There is also a…

Downloads
41
Likes
13
Rating
0
P
Printablesder_matze

Nitecore Tiki magnetic ultralight headlamp adaptor

Background and options I searched for a ultralight trekking headlight and decided to use my nitecore tiki ( LINK ) wich is ultralight and super useful: extra small and ultra light almost watertight - rainy weather is not a problem (IP66…

Downloads
40
Likes
15
Rating
5
P
Printablesjeff9845

Lectric XP4 Elite headlamp frame mount

Tools needed: Dremel; drill; mm hex wrench's; 8mm socket wrench; 3d printer Parts: 40mm M5 bolt, M5 nut, M5 lock washer, 16mm M3 self tapping screw, 10mm M3 self tapping screw, superglue

Downloads
39
Likes
1
Rating
0
P
PrintablesZyeus

Headlamp mount for Team Wendy EXFIL SAR

Headlamp mount for Team Wendy EXFIL SAR Backcountry attachment to NVG mounting area.

Downloads
39
Likes
2
Rating
0
P
PrintablesBRCD.TECH

Lexus headlamp dustcover

Lexus headlamp dustcover FOR LEXUS LX300. LX450, LX470, LX570, LX600 (CHECK ONLY ON LX470) WITHOUT HOLES FOR WIRES Пылезащитная крышка для фар Lexus. БЕЗ ОТВЕРСТИЙ ПОД ПРОВОДА REMIXES ARE WELCOME!

Downloads
38
Likes
0
Rating
0
P
Printablesjamkas

Silva Free Headlamp helmet mount

This is a mount plate to attach a Silva Free Headlamp to a bike helmet. You can print this mount for the lamp only and keep the battery in a pocket, connected by a long cable or print a second one to mount the battery on the helmet too.…

Downloads
38
Likes
1
Rating
0
P
Printablesvic

kask plasma headlamp klipp

if you own a kask industry helmet Plasma, trust me, those clips you wont get even from kask itself cause they havent this as a spare part… what a bull****!!! so i ended up with drawing it -just because i didn´t wana buy a complet new…

Downloads
38
Likes
4
Rating
0
P
PrintablesJan Janča

Headlamp holder replacement

Replacement of the headlamp holder. Printing settings: Infill: 15% PET-G No supports

Downloads
38
Likes
4
Rating
0
P
PrintablesJPN_FI

Headlamp backplate

For a quite common AAA size battery unit Print Settings Supports: No Category: Outdoor & Garden

Downloads
38
Likes
6
Rating
0
P
Printablesmac190

Olight Baton 3 headlamp adapter

This is quick and easy print, flashlight snaps in place with little to none movement. You will require 25mm wide elastic band/tape (suspenders like). Best material to be printed with - nylon but probably petg will be just fine (maybe…

Downloads
36
Likes
6
Rating
0
P
PrintablesAdam

Travel switch cap for Nitecore HC68 headlamp

This is a cap to prevent the Nitecore HC68 's switch from operating during transport in a bag or luggage. Printing instructions Print the .stl file as oriented, in flex material If the fit is not perfect (variations in printers and…

Downloads
36
Likes
6
Rating
0
P
Printablesjordini321

GoPro/Headlamp Combo Helmet Mount

This mount is intended for combined headlamp/GoPro usage, such as in caving situations. I printed it with SainSmart TPU (Shore Hardness 95A) at 100% infill. The headlamp is a bit difficult to squeeze through the loops, but it's held in…

Downloads
36
Likes
10
Rating
0
P
PrintablesZajda

Decathlon HL 900 headlamp repair strap bracket

I have this great headlight HL900 by Decathlon for a few years but Main brackt that holds lamp itself on strap broke. Sad but true reality. I tried to use several types of glue to repair it but with no good efect. So I designed my own…

Downloads
35
Likes
2
Rating
0
P
PrintablesAscari

Headlamp Gridfinity Bin 3x1

If space is the only concern you have, then this is the Bin for you The 3x1 Headlamp Gridfinity Bin squeezes in a Generic Headlamp into as small a space as possible.

Downloads
35
Likes
1
Rating
0
P
PrintablesSkomir

bike headlamp holder Fenix HM50R, Fenix HM51R

bike headlamp holder Fenix HM50R, Fenix HM51R, držák čelovky na kolo Fenix HM50R,Fenix HM51R

Downloads
35
Likes
9
Rating
0
P
Printablesmklopfer

Petzl Headlamp DUO S mount for GoPro

This Mount enables you to mount your Petzl Duo S headlamp on a GoPro mount. Print settings: 0.2mm layer height 20% Infill No support required! The model shown in the picture was printed in Bambu PETG-CF to ensure a better stability due to…

Downloads
35
Likes
3
Rating
0
P
Printablestyler

Milwaukee Hard Hat Headlamp to Work Light

PLEASE SEE IMPORTANT NOTES IN THE “REQUIRED HARDWARE” SECTION BEFORE DECIDING TO PRINT THIS This is to allow you to use a Milwaukee Hard Hat Headlamp (Part #2163-21) as a work light that can be held or stuck somewhere with a magnet.…

Downloads
34
Likes
5
Rating
0
P
PrintablesВалерий

Nitecore Nu 25 Old headlamp mount

A head mount for the Nitecore nu 25 Old c flashlight with powerful locking devices to prevent the flashlight from falling down.

Downloads
34
Likes
4
Rating
5
P
Printables3dthinks

Faceshield with headlamp adapter

With this Faceshield you can mount a Headlamp (Decathlon type with connection sphere 6mm model evanic) In order to have a good assembly without wasting so much print time the GCODE should have 2 different layers, first 0,3mm and on the…

Downloads
34
Likes
1
Rating
0
P
PrintablesKstile

HB04 remix of Headlamp Base Replacement

Printed in PLA+ no problems

Downloads
33
Likes
3
Rating
0
P
Printableshigglyblarg

Remix of Unibody Headlamp Clip for Thicker Straps

Remixed to suite my headlamp. Can be used with elastic straps that already have the plastic adjustment bits on them. Nice and snug on a light with a 21.3mm body diameter and straps that are 25mm wide. The Solidworks file is easy to…

Downloads
33
Likes
2
Rating
0
P
PrintablesCaiben

Schneider Headlamp back

Replacement back for a schneider electronics headlamp that i really liked but the loops for the straps started to break so i needed a replacement, works with original gasket though i would not classify it fully back to the same standard…

Downloads
33
Likes
5
Rating
5