119 models
This little beast is completely functional and complete overkill for a Ukulele! The extended scale length for the lower strings makes for improved tuning stability even at lower tunings without the need for heavier strings, meaning this…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
A collection of Headless Slotted screws according to ISO 724 , ranging in sizes from M2 to M12, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75 mm, 80…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
Headless Jack by https://aidinsalsabili.com/ This dude has some wicked stuff check it out. If you are using a resin printer The original from the sketchfab site should work with minor adjustments. lots more detail. before the addition of…
This is the third version of my headless guitar design. The main improvements are the shape modification and the installation of a floating trem system. I have uploaded the step files in case anyone is interested in customizing it (make…
9/10/26: Ploutone no longer makes the headless bridges used in the original models. There may be remixes for alternate part compatibility! Welcome to OpenBass! This is my first DIY guitar project. There are many 3D printed guitar projects…
🛠 ISO 2342 Headless Screws These printable headless screws follow the ISO 2342 standard — perfect for alignment and positioning tasks. Designed without a head, they’re ideal for clean, flush-fit applications. 🖨 Recommended Print Settings:…
This is the second version from a previous build. The main improvements are the installation of the steel plate to make it more rigid. Now it stays in tune for many days: I have uploaded the step files in case anyone is interested in…
If you don't want to print your skirts on the V0 itself and have a bigger printer at hand, you can print this one-piece side skirt. It comes in two variations: the regular one is just like the original skirt pieces “open” the “closed”…
I broke my display that came with my LDO Voron Trident kit as a result of a series of bad decisions. Decided to run it headless for now and I didn't find a design I liked so I remixed the rear center skirt into something that would fit…
A collection of Headless Hex screws according to ISO 4026 (DIN 913), ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Headless Torx screws according to ISO 724 , ranging in sizes from M3 to M16, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25…
This is a Teensy 4.1 case. Printed out on Anycubic Photon Mono 4K using Anycubic Water-Wash Resin+ Gray . Magnets are glued with poxipol. The backplate is attached to the console using velcro. Teensy 4.1 gets very hot, so the case design…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
For info on parts look at the V1 design: https://www.printables.com/model/526461-sparrow-electric-travel-guitar This is an improved version of my previous work, with the following changes: Different printing orientation for body parts…
Status: Released Description: This design houses the Gaggiuino Headless E177 PCB and provides mounting options for the outside of an espresso machine. Lights, buttons, and USB-C port are accessible with the case installed. There are 2…
An acoustic guitar with style. Because electric guitars are not enough of a challenge (hardly any impact of the body on the sound). So, try to print this one. If you want to go fancy with the sound: You can replace the top deck with other…
Travel guitar with integrated effect device and power bank. Headless and full scale 628mm. Suitable for E-Gitarrenbausatz Single Cut and pocket pod effect device. Guitar 1 also has a low-latency Bluetooth transmitter for direct…
Supports required! Please add supports to the edges only! Not required for the bridges or for inside cartridge slot! Designed to be used with Teensy 4.1 Game Boy Cartridge Case, available on Printables here:…
Purpose If you want to have one piece of front skirt rather than the three piece one than this is what you are looking for. There were an initial version from @Lab3DP (credited) but it was only for the original V0.2 (not the R1 version)…
Hi, so this is my custom-designed front panel for the CR10 Smart and Smart PRO, I've designed it to give the front end a nicer look in my opinion, and to get rid of the now useless display as my printer runs Klipper and so is headless…
This is the Prusacaster 2077 but now it's headless for that truly Cyberpunk vibe. This includes the following changes: Larger faceplate that handles 2 pickups Increased internal area for wiring Added a control board faceplate Added a Jack…
🎁🗃➡Download here moster enegy holder: https://payhip.com/b/I0lWd 🔗➡Download Ghostface Candle Holder : https://payhip.com/b/djGal
The headless horseman ideal Halloween boss for DND
Updated skirt front panel that replaces the section where one would normally have a screen of some type. This version allows you to use your existing electronics panel. I removed the edge that stick up where the panel would need to be flat.
An example of 3D model generated with my Gugulele OpenSCAD script… (see https://github.com/bguan/gugulele ). Decorative headless unibody gourd shaped design Single rectangular through-body spine Single oval off center sound hole T-Bracing…
These are metric outer threads, exactly as if they were part of a screw. They can be added to your design. You can use them to create a special custom-design screw. You can use them to mount your design or to attach something to it. My V2…
Modeled after the axe of the Horseless Headless Horsemann from Team Fortress 2, and the Headtaker's Axe for Demoman. https://wiki.teamfortress.com/wiki/Horseless_Headless_Horsemann I threw together this model in a week leading up to…
There is a E3D V6 heatsink clone for Voron called the headless V6, here is my remix based on official Revo mount. Please follow the Voron Printing Guide: 4 x perimeters 5 x top / bottom layers 40% infill materials - ABS / ASA
This is a Teensy 4.1 case designed to look like the M8 Tracker by Dirtywave . The button details are designed so you can set up a filament change near the end for accent arrow key vibes. I'm not too sure about thermals so the Teensy board…
The Headless Horseman is a legendary spectral figure from European folklore, most famously appearing in Washington Irving's 1820 American short story, "The Legend of Sleepy Hollow". In the story, the ghost of a German Hessian soldier,…
While being an engineer and having access to a 3D printer I wanted to create a guitar esthetically suitable for folk-rock music. Moreover, I wanted to experiment with pickup and electronics setting by adding a custom lipstick pickup…
That's a front cover replacement for headless CR-10 Smart due to motherboard replacement (no stock display). This is the full vented version that removes the stock tray too (i think it's useless). It's part of a bigger set of mods i'm…
I modified the hinges for Gridfinity Storage Box by Pred to use headless m3x30 bolts instead of the ones with the head. This effectively in turn is easier to install and stronger as there is more plastic within the hinge.
Headless skirt add-on for the Voron 0.2 V0.2 Skirt Set Mesh Only mod
Diego exported from gothic 2 and fixed with prusa slicer. I didnt figure out how to export his head so its just his body. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25%…
Another fun little mech robot scaled to 32mm and 54mm with 25mm and 50mm baseplates. It really seems like it needs a mech head - feel free to remix if something strikes you as the right fit for this!
Made cuple of headless guitars using the guyker headless bridge system, but on some builds it get hard to tune, be it from the spacing of the single bridge pieces or from the tension of the string. Either way, had to make my life a bit…
Features: Holds hundreds of lbs if mounted over a wall stud Top module now just has a single centered mounting hole (works better when installing over a stud) Top module now has rounded inner edges Zeus bottom module was highly remixed…
Raised nut and bridge for the Headless Baritone Ukulele
INTRODUCING THE KNOMI (V1) HEADLESS FRONT SKIRT Got a spare Knomi sitting gathering dust in a draw?! Why not put it in this and get some use out of it on your V0 !!! ok ill stop doing the sell sell sell now :D but if you would like to use…
Ride of the Hollow is a layered Hueforge art piece print capturing the chilling legend of the Headless Horseman. With bold, vintage-inspired linework and a dramatic orange-and-black palette, this haunting figure rides through a shadowy…
upcycel a macbook pro 15 2015 with broken display as a “desktop” computer.
Introducing the "Headless Hideous Egg Monster Holder" – the egg-citing Easter accessory that's sure to crack you up! Imagine a headless chicken with a not so secret compartment in plain sight in its belly, perfect for protecting that…
this is tobias he has no head he's sad please be patient with him
An example of 3D model generated with my Gugulele OnShape script… Decorative headless gourd shaped design Soprano ukulele scale length Double rectangular through-body spine Single oval off center sound hole "+|-|+" Bracing Tail-end…
Headless Screw ISO2342 M6/M8/M10 Various Lenghts
Cute Headless Horseman Ai Hi-Res A chibi-style Headless Horseman figurine , dressed in a coat with a scarf, holding an axe. -Use caution when scaling, haven’t tested it on a printer yet.-
Case for headless mod of Gaggiuino which uses the 'hacked' FW from https://github.com/a4vgx7b2M/gaggiuino-esp32-loader . Will hold the ESP32-S3 devkit (e.g here ), JST XH 4pin male header ( here ), and SD car reader without voltage…
Similar to all my other headless ukulele designs, but meant for folks with printers with maximum 220mm in Z-axis. I haven't printed this yet, so if you did successfully, please link your make here. This comes in 3 pieces to be glued…
the CENTER part does not have the matching channels to fit the Left and right parts. This is corrected. Center is now cut in two, in order to be printed on MK3s bed Category: Music
Discover the haunting mystery of deep space exploration with this incredible astronaut figurine STL model that captures the eerie essence of cosmic isolation. This meticulously detailed 3D printable statue showcases a space-suited…
I use my Raspberry Pi Zero W's headless. I don't need access to any ports other than to get power to the computer and GP
Putting it at 4000% size should make it easier to work with. This model went well, but the detail might be a bit shallow.
This is a remix of the Haz1 case. It snaps together and allows access to the microSD card for quick swaps. This is designed to run headless, and such i didnt need access to the raspberry pi Ports. This is controlled and powered by 1…
Soprano Gugulele An example of 3D model generated with my Gugulele OpenSCAD script... Decorative headless design Double rectangular through-body spines Double oval sound holes Banjo style planetary tuners Hole in tail for 1/4" pickup 8…
The original model has the saddles relatively high and along with potential warping, the neck ends up having the strings very high off the neck at higher frets (i.e. about 5mm) This 1.6mm shim is fitted towards the body, between the neck…
A new 3D figurine generated by AI, a Headless Horseman (Sleepy Hollow). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality…
Summary An example of 3D model generated with my Gugulele OnShape script… Decorative headless gourd shaped design Concert ukulele scale length Double rectangular through-body spine Single oval off center sound hole 'T' Bracing Tail-end…
Hey there, I redesigned “Voron Front skirt for Trident/2.4 (Headless) No screen” so it fits 250 mm printers and made it easier to print it with 2 colors. Also Fusion360 file is included so you can make different logos. Hope you like it.
I had problem with the bolt from the original model keeps breaking due to its printing orientation. So I simply splitted the bolt from the rollder part and mirrored it to fit nuts on both sides.
I decapitated figure Category: Toys & Games
The NK tuning peg tool can be ridiculously hard to turn when the strings get tight, so this larger diameter extension can help with fine tuning. This prints best using standard setting with 4 walls. Increasing walls will decrease the…
Adapters to use tuners from a bass guitar with the Headless Baritone Ukulele
Theoretically this Tenor scale ukulele is injection moldable, anyone wants to try? Category: Music
Some has asked me about how to print my gourd shaped ukuleles (e.g. http://www.thingiverse.com/thing:1868201 ) on smaller printers as the unibody design requires delta style printers that can print the unit vertically with ~500mm height…
This Soprano size ukulele is a 3 piece design: Body Fretboard Bridge It has no conventional headstock i.e. headless, in order to minimize overall length. Instead, the tuning pegs are located at the tail end. It has a groove in the neck to…
Plant something to become the head of this dog. Scale down the print for smaller items, as I have above (test maybe?) Future plans to do a full sized print for a much bigger fly eating plant! Enjoy! Print Settings Rafts: Doesn't Matter…
So I got a headless guitar recently, that has these tuning pegs on the bridge that are just slightly too awkward to turn with your bare fingers. They have some slots cut in that allow you to turn them with a guitar pick, but most picks I…
My headless guitar w/ Overlord of Music bridge has its G string quite difficult to tune, so I made this small helper for tuning it. Printed with a Voron Trident with recommended slicing setting for Voron parts (0.4mm nozzle, 0.2mm layer…
A vintage inspired scene of the Sleepy Hollow rider under a full moon, for Halloween or anyone with spooky vibes. Black, white, gray, and orange filament. A custom frame is included on the 2nd plate. Can be hung with double sided tape or…
A headless bass guitar inspired by the Hexcore from Arcane. Designed for a 4 string, with a roller bridge travel saddle. Main Design Points: 2 soapbar humbucker pickups, 3 potentiometers spine reinforced by carbon fiber rods The insides…
This is my first attempt at a headless soprano ukulele. Here's how it sounds. Instructions I've moved the tuning pegs down to the body to try and simplify things. They work ok but have plenty of room for improvement. THE TRICKY PART:…
printed the headless electric guitar v3 from psicojimi. but only had petg and couldnt glue it properly. thought that with screws i wouldnt need to glue it so i started to edit the files
I designed to turn a headless MacBook Pro 14” or 16” into a compact desktop setup with a USB-C portable display. Important : the MacBook must have the screen removed, as this part clamps onto the top case. It will not work on a complete…
The Headless Horseman — Bust Inspired by Sleepy Hollow Inspired by Washington Irving’s The Legend of Sleepy Hollow , this bust portrays the Headless Horseman through a spectral silhouette: a period uniform, an imposing cape and an empty…
I wanted a key to make tuning my NK headless 7 string a little easier, similar to how I use an allen wrench for my floyd rose on one of my other guitars. This looks more like a drum key or a vending machine key. I printed it out of PETG.…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Headless raspberry pi zero w music player. I installed volumio as my client as choice. Materials used: Raspberry pi Zero W Sabrent External Adapter:…
Hacked together but works ;)
Facepalm whoever you like. Category: Sculptures
Tenor Gugulele An example of 3D model generated with my Gugulele OpenSCAD script... Decorative headless design Single rectangular through-body spines Double oval sound holes Banjo style planetary tuners Hole in tail for 1/4" pickup 4…
This is a case for a banananapi m4 zero, pisugar 3 and external antenna. There are cutouts for GPIO, and for air flow above heatsinks on the two big chips. The hole in one face is supposed to line up with the red LED to make it more…
Includes F3D-file for further modification and for taking measurements for reference. The background for this is that the mainboard for my cr-10 smart nuked itself, and it's getting a klipper-upgrade, therefore I won't be using the…
More details on my website https://nerd-sniped.com/blog/emeo-headless-computer/
Headless Pen and USB Holder (optimalized for Kingston DataTraveler USB Flash disk) No supports print, tested on 0.20 layer height, 0.4 nozzle on Creality Ender V3 KE, no problems. Enjoy and Happy printing. :)
I found that the tuning mechanism for my Traveler headless bass was so close to the bottom and top string that I tended to touch the string while trying to tune the guitar - which muted it so I couldn't hear it. I created this little…
A simple raspberry pi 4b case. This case only allows access to the USB/Ethernet end, ports on the side are not accessible, so a POE HAT will be required. I made this as part of designing a new mount for my printer that runs an octoprint…
This reinforced wall plug without a visible head is designed for flush mounting and features modified side wedges for improved grip in the wall. Available in multiple lengths: 8×19 mm, 8×20 mm, 8×21 mm, 8×25 mm, and 8×30 mm. PETG is…
The head gasket of my Bostitch HP118K 23 Ga. Headless Pinner blew out and was leaking air. I printed up a new one in TPU. I added a lip to the interior diameter to help prevent it from blowing out again. Used a Creality Ender3 V3 SE with…
This allows a traditional guitar stand (I bought an adjustable one from Amazon Basics…your mileage may vary) to accept a headless bass, in my case a Steinberger/Gibson-licenced Spirit. It has recesses to capture the strap buttons. Not…
Requirements Wemos D1 mini board (or clone). Sensirion SCD4x CO2 sensor module. OpenSCAD files, dashboards, and more information: codeberg.org/alxndr42/co2-sensor
Print Option: layer height: 0,10 Swap Instructions: Start with Black At layer #7 (0.80mm) swap to Dark Gray At layer #8 (0.90mm) swap to Blue At layer #9 (1.00mm) swap to Blue-Gray At layer #11 (1.20mm) swap to Brown At layer #12 (1.30mm)…
Designed for multi material (MMU) printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Part of the ExoBass project — full catalog, build planner, and assembly guides at https://exobass.com Plan Your Build & Get Hardware ExoBass can be confusing! Head over to our build planner to plan your entire build - it'll walk you…
Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com Plan Your Build & Get Hardware ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you…
Doesn't need to be glue, but is recommended Screws required, in-print holes are 4mm Need 2x Part A, 1x PartB and 1x PartB mirrored PartB and C may be hard to fit in the screen, mine is 14mm~ and hole is for 10mm~ If u use the jack port or…
![[WIP] CR-10 Smart Headless-frontpanel](https://media.printables.com/media/prints/e5e5e647-8f31-42d3-ba8f-2c16bb5e22fa/images/9305722_424cb3b0-0346-41e3-ab0b-f77288f6c9da_de0dfd40-6c6a-4fa7-b98b-ffee51a8ae5f/screenshot-2025-03-24-at-163026.png)
