4,337 models
Using TheBrokenNerd83's design ( https://www.thingiverse.com/thing:3578797 ), I printed the helmet in different sizes and tried to use as little support structure as possible. I share my experience with you in the video. This Video shows…
Print approx. €44.73–€54.67 excl. taxPreliminary estimate for one variant
Spartan: Corinthian Helmet . Probably going to make this into a keychain. The orientation of the sliced file is not optimal (I am guessing)
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for one variant
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant
Hello everyone. After someone reached out about copyright issues, I have decided to change the mounting system from the default, to my own. It has the same 40 by 40mm rectangular mount but has been changed from the original. The screw…
Print approx. €12.29–€15.02 excl. taxPreliminary estimate for one variant
Fallout: T51b Power Armor Helmet - Dice Tower Removed Old Files. Hole is now 26+MM wide to accommodate dice better. Also the bottom is flat and should need less support. New files called helmetnewa.*** THANKS w3dn3sd4y for the heads up.!…
Print approx. €23.64–€28.90 excl. taxPreliminary estimate for one variant
Viking helmet. Printed with PLA and 0.3mm layer height.
Print approx. €3.47–€4.24 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €7.59–€9.28 excl. taxPreliminary estimate for one variant
Update 08/12 new thinner design for faster printing. Included 3mf files for cube and rectangle. Speed settings are tweaked for maximum speed without (that much) quality loss. Simple insets that fit in Ikea Helmer drawer. The inner bottom…
Print approx. €6.96–€8.51 excl. taxPreliminary estimate for one variant
Use the screw that came with the camera case. Push the back of the print into the slot and push the front firmly until it clicks and is securely in place. Use the lowest possible layer height and a wall count of 4 for best results (with…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Remixed the Mandalorian trailer ball cover to fit into a 2" receiver hitch since I don't like leaving my hitch in all the time. Printed with gray PLA, and colored the middle in with a few coats of black sharpie, turned out pretty nice.…
Print approx. €15.26–€18.65 excl. taxPreliminary estimate for one variant
This helmet was designed to fit Dummy 13 figures and is perfect for customizing your models as miners, construction workers, firefighters, and more. Two versions: Standard helmet Helmet with a round headlamp
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I needed a holder for some motorcycle helmets so I made this simple part. The parts in the photos are made from PLA and have been holding my helmets in our garage for over a year with no problems. I would recommend printing this with 4-5…
Print approx. €7.13–€8.71 excl. taxPreliminary estimate for PETGSource material: PET
Drawer insets in various sizes with different compartments for the IKEA Helmer drawer unit. I sliced the the model with thirds vertically in half as a smaller variation. Only when creating the technical drawings I noticed that the model…
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
Zelda: Rubber Helm From Tears of the Kingdom.
Print approx. €6.74–€8.23 excl. taxPreliminary estimate for one variant
keys hook version of "Motorcycle Helmet Hanger" by @MrBone66_567
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for PETGSource material: PET
The model is fully functional, simple and, above all, solid Držák na přilbu Modely: Lehká nárazová přilba Dräger HPS 3500 SICOR EOM s brýlemi a se stejnou rukojetí
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
I struggled with the Grill template (until I realised it was meant to be printed in A3 Duh!) by which time I had already started this “project”. It's scaled to the original downloadable files so if you change the scale to fit you will…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
a wearable Hollow knight helmet this model is relatively large, i suggest splitting it yourself for your printer try to print with low infill to keep the weight down i suggest gluing a regular helmet to the inside to make it stay on the…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
Spiral Mode/Vase Mode You can print it with: Nozzle: 0.4/0.6/0.8mm (Can print 0.8mm line width with 0.4/0.6 mm nozzle tho) Layer Height : 0.2mm/0.4mm (Recommended) Bottom Layers: 4 Scale it as you like :)
Print approx. €2.95–€3.60 excl. taxPreliminary estimate for one variant
The labels kept falling out, so made this. I designed it to be printed with layer hight 0.24mm. 4 layers in total, so prints pretty fast. Don't exactly know how fast, but when i came back after 15'ish minutes, 6 of them were done.…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Replacement facemask for the little gumball machine football helmets.
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
I designed this for a friends Serfas bicycle headlight so that he could mount it on his helmet. We did it in ABS. I designed it with the exact measurements of the original, (the black one in the photo). The three petals can be heated and…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
The Corinthian helmet originated in ancient Greece and took its name from the city-state of Corinth. It was a helmet made of bronze which in its later styles covered the entire head and neck, with slits for the eyes and mouth. A large…
Print approx. €1.95–€2.39 excl. taxPreliminary estimate for one variant
Vendel-period spectacle helmet Geographical and Temporal Origin Location: These helmets are primarily associated with the Uppland region of Sweden, specifically the boat grave sites at Vendel and Valsgärde. Time Period: They were…
Print approx. €8.30–€10.15 excl. taxPreliminary estimate for one variant
Hello, Today I have for you an Action Camera Holder for FAST/FMA/MICH helmets . A great way to attach the camera to the helmet and then easily remove it. The holder fits perfectly into both helmets and camera holders. Be careful when…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
Superplasma Kask Helmet was missing a circular clip that holds the straps down to the helmet. Printed this in Overture PLA with 15% infill. Recommend using a skirt/brim as it was knocked over the first time I tried to print it.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This model is a stick-on wind-screen that works for the Sena R1, R2 and R2 Evo Smart BlueTooth bicycle helmets. It may also work for other Sena helmets but I have not been able to try it on them. Background: My wife and I took up e-biking…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
i made the hook a bit longer, deeper. rounded it a bit and took of the lower hook. Print instructions i printed it as fast as possible and its working perfectly
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for one variant
I was invited to a bachelor party and I did not want to go empty-handed, so I saw a pattern on the Internet and drew a set like in the first photo from scratch. I bought the helmet and the hose (for contact with food) in the store, the…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
Print it on its side to get the clips stronger, using support everywhere. Filament ASA and layer thickness 0.20mm. I used nozzle size 0.4mm. I have a separate file for matching fixture for a Ledlenser MH5 light with flex-brake-bad, an…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Step 1 Print Step 2 Remove From Yo Printers Bed Step 3 Remove Ugly Ahh Supports Step 4 apply heat to yo 3M VHB adhesive mounting tape (3M works the best) Step 5 apply tape to yo print Step 6 apply heat to the opposite side of yo tape Step…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Helmet hook for your motorcycle
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for PETGSource material: PET
A replacement/alternative helmet for Zero's Kotobukiya Mega Man X model kit. (Model kit not included.) Features two versions- an edited version closer to SENSEI's style from MMX5-6, and one imitating the original Mizuno-inspired sculpt…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Druckbare Ersatzhalterung für die Montage des BuddyChat - Moduls am Helm. Das Original bricht leicht ab, das die Schraube ein wenig zu lang ist und die Schraubenaufnahme nicht massiv, sondern hohl. Eine Aufnahme für den Gummiring ist…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
This helmet was orignally made by me for FRC Team 6996's Koala Mascot that we have on the side of our robot. The ziptie slot fits a ziptie of 4.7mm wide and 1.2mm thick, it will fit most ziptie slots, and there is a spot for the ziptie…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
Tough Hook mount to Motorcycle Helmet Hook (Love my Tough Hook) https://a.co/d/5RDsxH3 Here is the Helmet Hook HEAD that will mount to this. https://www.printables.com/model/1354553-motorcycle-helmet-hook-head-shaped-kind-of Printing…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
My helmet has no D-rings and I needed a way to hang it on the bike. Direct fitt for first Gen WeeStrom, but worked on my TransAlp and will probably fit others. Ratchet works with my Schuberth and, again, will probably fit others.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
Reverse-engineered replacement fastener for Sedici-brand adventure-style motorcycle helmets. These helmets are a store-brand of CycleGear retail chain. Fits model FG-601SV, may fit others. Recommend at least PETG to deal with sun…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Fallout T51b Power Armor Helmet.
Print approx. €12.40–€15.15 excl. taxPreliminary estimate for one variant
Here is Iron Man Mk42 Helmet. Print instructions Category: 3D Printing
Wanna get the commercial license? Have a look at my printables club. Your wished logo isn't available? Ask me! Maybe I make it. ;-) I have created a helmet hook, which has a wide contact surface so that the padding of the helmet won't get…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Not really suitable to wear on your head, meant to be printed smaller as decoration on e.g. a shelf. - Aren't you a little short for a…
This is a full scale printable Stormtrooper Helmet opening sice at the bottom w:228 mm l:224 mm For the glasses i used acrylic glass. I added the form and the addons for mounting to the files. For the Hovi Mic i used this thing. Since…
German helmet themed car decoration 50mm diameter
I've put all the pieces together to print an authentic “The Madalorian Cosplay” with quick instructions. Please pay attention to the size of the parts! scale the parts to your size 12.09.2023 - added new model - The Mandalorian Cardridge…
It has been a long journey, but I was finally able to finish this project. Let me start by thanking Steen Winther. His model ( https://grabcad.com/library/darth-vader-helmet-2 ) was the starting point of this remix. 14 months ago I…
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:2718242 Edit: Added split versions, use the one-piece model if you…
I pulled the 3d model from the game and started modeling it, because nobody should have to pay for 3d models here it is, in its unfished glory! A few more edits will be coming, however if someone can get this version to print (I'm getting…
With most helmet mounts, the helmet only rests on a very small area (ball), which can damage the helmet padding in the long term. That's why I designed my own holder that solves this problem. You can also hang your jacket/pants and keys…
Fits on any Bambu sized printer. Use variable layer height to have it fit.
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:3486066 Hmu if anyone needs a split version, or if someone splits it…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Dr Doom Mask - Marvel Doctor Doom Helmet - Cosplay Props - FREE STL PREMIUM STL File for 3D Printing Follow me>>>: All My Designs: https://linktr.ee/3dprintmodelstore You can support my design work by joining my patreon at here:…
A High resolution model of the Iron Man Mk3 helmet from Iron Man I. Suitable for cosplay. model by Official3D @Official3D follow him <33
Original Thing here: https://www.thingiverse.com/thing:4629346 This is just a reupload under the CC-BY-4.0 License. Original Design by Boxandloop. Update 12/09/2020: Added a wiring video Update the code for Eyes to blink on when facemask…
Llavero de casco de moto para decorar tus llaves o accesorios. Tamaño: 21.92 mm x 31.39 mm x 21.51 mm
The source marked this model as adult content.
I've been doing a little research on this helmet and have put together my own rendition of this helmet based on the White Amour pictures I've listed here. I recenly made Geoffro's Mk2 helmet from his patreon web site. I'm still very new…
Hi Will, I started from scratch with this helmet. Thanks for the original files but there was a lot of information missing in that model, I pulled it directly from the game for which I had : ) Hopefully in this version you will see a vast…
Master Chief Helmet Made by Kolnic over on thingiverse at https://www.thingiverse.com/kolinc/designs , thought some people here would wanna print it, I have and it is an amazing very detailed. Sadly no remix for visor free version, but…
Did find this model on thingiverse very handy for placing ur helmet niceley on the wall. Gcode provided is with Amazon Petg ! be care full. printed with 6 perimeters and adaptive cubic infill or Gyroid 60% more models for this hook in…
Wolverine Inspired Helmet Enjoy New version available at my shop - https://www.cgtrader.com/3d-print-models/hobby-diy/other/wolverine-deadpool-3-movie-mask Category: 3D Printing
Easily printable parts for Lego Minecraft figures more work on more work also on https://dxbworks.etsy.com
An Iron-Man Helmet that can be used for cosplaying or just displaying. Model contains: 3-Parts for the model to print. Size can be any use. Use Any type of Filament for this model if you want. Remix if you want to change the model or do…
The Batman 2022 Inspired Helmet Enjoy Category: 3D Printing
iron man mark 85 helmet please size to your head before printing https://www.thingiverse.com/thing:4607836 link to motorize this helmet you will need some mg90 or sg90 servos the video below this a great video on how to make the helmet…
There was a really good one of these Helmets over at the MiniFactory that Daniel Lillygreen did, but 'm not sure what happended to it and as a big fan and due to the share number of requests. Here it is in all its glory. Also a big thanks…
This has been on my ta do list for months and I've had numerious requests for this Helmet. I've done my best to provide 3 differant variants of the Helmet as evey one likes alternatives, so you now have plenty to choose from. Like…
Printer brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 10% Filament brand: Polymaker Filament material: ABS Notes: I printed it upside down on the print bed to minimize the amount of supports…
Mark 46/47 helmet Full suit is now available at my shop. Link below 1.-Sizing - The Helmet may need to be sized for your needs, as it is roughly sized to fit a Average male I recommend using my FREE Heads for Sizing here -----…
Ten model hełmu Stormtroopera został zaprojektowany z myślą o druku 3D oraz wiernym odwzorowaniu kultowego wyglądu znanego z uniwersum Star Wars. Projekt posiada wyraźne detale, gładkie powierzchnie oraz poprawne proporcje, co ułatwia…
Printed to be a desk ornament. .2mm layer height, 15% infill, and supports needed for the underside. I made the one in the pictures using Hatchbox Metallic Silver PLA
Remix of the “The Mandalorian” by ReProps . The helmet is resized to 20% of original to fit a barbie doll :) The size is cca 40x47x51mm now. The skin became too thin to reliably print so made it thicker by inserting inside the helmet…
After having been requested to converted the previous model from a pepakura file! More and more people suggested it wasnt quite the correct shape. So after many hours of play and manipulation, I think we finally have somehing worthy of…
My version of the helmet from the Martian. I never had the opportunity to see the original in person so this is done from watching the movie many times and represents my best estimate of size and proportions. Some adaptations for 3D…
Here is another cat helmet for all the those daring cat owners. I included two versions in the profile, so you can choose which you prefer. The one that is cut on the bottom will be an easier print, but you do lose some of the look that…
I have found some hard edges that were supposed to be smooth V1.1 addresses most of that. If I find time, I will try to fix the air intake holes, there are many broken triangles hiding inside I have it printed! Scaling it to 1000% was a…
Stormtrooper First Order helmet wearable Link to the newer and more accurate Model https://www.printables.com/de/model/39467-stormtooper-tfa-helm
! the model shown in the picture was painted ! Samurai Display Helmet for your shelf or setup! Easy assembly! Size: 15cm high 14,5cm wide 12,5cm deep The parts are ready for assembly and only need to be glued together. Connectors are…
Mark 85 Ironman Inspired Helmet Enjoy Category: 3D Printing
The Model is scaled to MY head. You will need to make your own measurements and scale it to yours. I have a big head so you have been warned. The parts have non manifold edges you will have to right click them and repair them in the…
This is HappyMoon's Black Panther Helmet - Civil War helmet Cut for a Ender 3 I did NOT make this, I only cut it for a friend. Enjoy Category: 3D Printing
I have a vast collection of pep files from other modlers I collected over the years when I was into pepakura making, This is the Iron Man Mk3 since one and two are already here on thingyverse, I'll work my way through all the versions,…
i made this revision of the helmet sturdier, but at that cost lost some detail print at 0,05 mm layer height with supports, doesnt matter what type
Remix of Captain Rex's Helmet Phase 2 (Star Wars) by Killonious : https://www.thingiverse.com/thing:2446611 Oh and don't forget the detail pieces You also need the file for the rangefinder: Captain Rex RangeFinder Articulate by camusic:…
Here is Fallout NCR Ranger Helmet Mask. Print instructions Category: 3D Printing
Replica of the main character's helmet from the video game Satisfactory. Comes in two size variations. The “large” version is for a 23" circumference head and the “small” version is for a 22" circumference head. Both sizes are designed to…
A big thanks to Danny for providing the low poly model. I have done with it what I could. So hopefully it will be of use for your project. Good luck and do check the sizing suits your needs, Cheers Jace Print instructions Un printed as yet!
This is an expansion of the helmet by big_red_frog. The .stl's are entirely his without any modification by me. His main interest was in creating the files needed to make the helmet. However he does not go into detail about other aspects…
Now the Night Vision Helmet can be printed separately from the head itself , allowing for a more better color scheme. Goggles move up and down, same as original model. Printed on its side with supports. Layer hight 0.16mm Remixed and…
Hi Chris, tidied it up as best I could,hope it works for you and please check the sizing suits your needs, as always I look forward to seeing pics of your progress, Cheers Jace
Here is a American Football helmet I created from a 3D scan I found of a Riddell helmet. Scale to your needs. I wanted to use it split in half to easily hang on the wall. The face mask was extremely difficult to print. I ended up needing…
Scale to Your Head It wont fit it was scaled to me, Thank you for downloading! Have a Nice Day!
Hi Rodney, yes I do have The Witch King Helmet from the Lord of the Rings. Good luck and post some pics of the finished item if and when you get round to it. Cheers Jace
Made this remix for a friend who wanted a small resin printed helmet.
Full size helmet with room to add LED lighting. You'll need to find a visor face to suit and I also used a wire coat hanger for detailing. I have had a few questions about sourcing parts for this build, they were all purchased from…
This is a remix of two wonderful models: Ultimate Helmet holder by Flobi Low-poly skull by Peter Farell where you can use the low-poly skull instead of the original ball that goes on top of the helmet holder main body. Printing…
This is a remix as mentioned in the summary. I made this for a friends birthday and modified it to fit a standard 32x8 LED Matrix from Amazon. The modified files are the ear cups (threaded and hollowed to house electronics) and the front…
Thanks to Mike for bringing Omega's model to my attention https://grabcad.com/library/robocop-helmet-1 This amaizing helmet has been discussed with the idea of bringing it to life as a wearable model. I'm still learning, so it is the best…
Just for fun, it looks my cat does not like it :D
