Linear wall art: Five very simple herons
one colour - Wait untill it cool down completely first.
- Downloads
- 45
- Likes
- 18
- Rating
- 5
48 models
one colour - Wait untill it cool down completely first.
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Please contact me if you are looking to use this model for commercial use! Disclaimer: This design is intended for personal and non-commercial use only. Any use for commercial purposes, including but not limited to selling, distributing,…
This 3D design represents a miniature version of the classic Heron's fountain, an ingenious device demonstrating the principles of fluid dynamics using air and water pressure. Although this miniature is not designed for continuous…
3/13/2019 Update I finally got around to adding decorative flourishes to my fountain. I remixed jerry7171's Lions Head Fountain scan and working it over so that I could use it in my Heron's fountain OpenSCAD script. It works pretty well…
Two herons in the reeds
Potnia Theron : Minoan Fertility Goddess Potnia Theron: The Mistress of Animals Potnia Theron is a term used to describe a female deity associated with animals in ancient cultures, particularly in the Mediterranean region. It translates…
Standing great blue heron sculpture. Minimal supports. Realistic detail. Great shelf or desk display. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld ( https://makerworld.com/makerlab/imageTo3d )
This is a filament painting of a Heron at Sunset. It was made by using Midjourney. Printed at 110x220 @ 2.64mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black Printbed Red…
Printing Several printing options are available: the blade may be printed upright (parts with “vertical” in the filename) or horizontally split in half ("Blade * half" in the filename), and the hilt can be printed “pre-assembled” or as…
Has a slot for a 1/2inch or 12.7mm rod at 50mm long. Wheel of Time Rand's sword Not for commercial use Category: Props
A simple update to Heron's design, I just added a simple pull to make it easier to remove the drive tray from the caddy w/o needing to use tape like Heron did.
I love wind toys. I've designed quite a few wind spinners. I live near a nature preserve that hosts many different birds. We often see big Blue Herons silently standing in the marsh. They suddenly bob their head down and grab a fish. I…
Figura 3D de Charlize Theron Añade a tu colección esta espectacular figura 3D de la icónica actriz Charlize Theron. Este modelo ha sido cuidadosamente diseñado para capturar sus rasgos con un alto nivel de detalle, haciéndolo perfecto…
A beautiful minimalist painting of a Heron on the wall. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0,2 mm Infill: 15% Filament: PLA Notes: Top/botton pattern - concentric Category: 2D…
(WIP as I'm trying to make it less leaky) You'll need: Two jars (⌀75mm, one with height ≤10cm) Something to make the joins airtight (I used white glue but it's not ideal) Some tube (⌀ 4mm) Mechanism:…
My Scary version of a cute articulated Caterpillar. Easy print in place with no supports. 2 walls and 15% infill Includes cavities for 3mm magnets for fun on fridges.
300 - Theron - 2006 3D printable model.
Model according to this wikipedia article: https://de.wikipedia.org/wiki/Heronsbrunnen Almost 2000 years in the past the Hero of Alexandria invented this fountain. It is using the air pressure to move the water above the water level using…
Swords were common enough, but the heron-mark attracted attention and speculation. Category: Props
Took inspiration from the model from Cole Parsons and added a pull tab to the 2,5inch adapter. Split the bottom off for more variaty.
Wall art / fan: A heron on the lake (two colours) You may find model of fan handle here: Fan Handle od autora Eva Máčová | Stáhněte si zdarma STL model | Printables.com Important: This fan is 1 mm thick, so you need handle with a 1.5 mm…
Ce place sur une bouteille de vin
My wife and I played in the virtual world “Asheron's Call” for many years. In memory of those times I created this multicolor print. This project does not require an MMU. In place of the MMU it prints in layers using the pause and change…
Bienvenue dans les ténèbres de Déracin Déracin n'est pas seulement un monde de Dark Fantasy médiévale ; c'est un univers à l'agonie où l'acier ne sert plus à protéger la vie, mais à remplacer l'âme. J'ai conçu cet univers pour explorer…
My Vallon Heron Glacier Glasses broke a few weeks back but the lenses were still good as new so I decided to print a TPU replacement. Works great, instead of arms you use a sports tether that latches on to the posts on the sides. Prints…
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Découvrez le modèle 3D du Stickman Bûcheron, une représentation captivante de l'art de la coupe du bois. Imprimez ce modèle en 3D pour ajouter une touche rustique et authentique à votre collection. Le Stickman Bûcheron est représenté avec…
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Due to the top mounted PCIe slot of heron's 10inch ITX Case V2 I ran into an interference issue with the original bracket. I cut away the upper lip to make the bracket close flush and thus allowing to mount another 10inch module over it.…
A faceted planter/bowl with a raised heron motif on the side panels—nature-inspired décor for desk or shelf. Note: All my models use 1.2 mm wall thickness (0.4 mm nozzle = 3 perimeters , 0.6 mm = 2 perimeters ).
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Capture the ethereal beauty of grace and nature with this stunning 3D printable figurine that transforms any space into an art gallery. This exquisite STL model features an elegant woman seated within a graceful crescent moon, her flowing…
Black-crowned Night Heron is a digital STL model prepared for 3D printing. Preview renders show the supplied geometry from multiple angles. Choose scale, orientation, supports, layer height and material for your printer. Digital file…
Balance these blocks carefully to not destroy the a world. Or build your own world.
Agami heron 3d printable model, detailed bird statue for display, education and collection, in stl format for 3d printing. Great for display shelves, classroom dioramas, collectors, and gifts, with a lifelike pose and accurate silhouette.…
Magnetický držák filamentu pro jeho svaření pomocí kleští Magnetic filament holder for his welding with a pair of pliers
A 2,000-year-old fountain design you can print in one piece. Heron of Alexandria described this fountain in the 1st century AD: pour water into the basin, and a jet rises from the center, seemingly driven by nothing. The trick is air…
Abstract Heron Couple Sculpture - a decorative print, perfect as a desk or shelf decoration.
Due to the top mounted PCIe slot of heron's 10inch ITX Case V2 I ran into an interference issue with the original bracket. I cut away the upper lip to make the bracket close flush and thus allowing to mount another 10inch module over it.…
Balance these blocks carefully to not destroy the a world. Or build your own world.
Standing great blue heron sculpture. Minimal supports. Realistic detail. Great shelf or desk display. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld ( https://makerworld.com/makerlab/imageTo3d )
Bienvenue dans les ténèbres de Déracin Déracin n'est pas seulement un monde de Dark Fantasy médiévale ; c'est un univers à l'agonie où l'acier ne sert plus à protéger la vie, mais à remplacer l'âme. J'ai conçu cet univers pour explorer…
This version of the sword has been broken down to different parts so they can be printed separately in different colors then glued together. The cap is not glued on but is removable by squeezing its sides, the blades then can be printed…
This version is for those who don't want to glue parts together for different colors. The hilt prints all at once, the cap is not glued on but is removable by squeezing its sides. The blades then can be printed separately then inserted or…