Search results: hoop

Sort order

923 models

P
PrintablesGVC

Embroidery hoop V2

The screw is improved with better grip and a body that tapers outwards to make tightening and untightening easier. It also has a larger thread that seems to last longer than the previous one. It's still not the strongest way to do this…

Downloads
1,900
Likes
374
Rating
4.85
P
PrintablesIan Foulds

Hoop Glider

This model has been superseded by my remix that improves the interference fit I suggest downloading the new version. https://www.printables.com/model/1736993-hoop-glider-redux-improved-interference-fit This is a ring wing glider also…

Downloads
1,607
Likes
351
Rating
4.5
P
PrintablesRo3Deee

Embroidery sock frame for Brother 4in 10cm hoop

Embroidery sock frame is a great tool, but the model needs some tweaks for brother 10cm hoop even after setting the params in OpenSCAD. The most important is that the model needs some room beneath. I made room beneath, strengthened it and…

Downloads
816
Likes
66
Rating
0
P
Printablesmotig

Embroidery/cross-stitch display hoops

These hoops were designed to display embroidery and cross-stitch art, mainly by hanging it via the built-in hole at the top, so you can re-use your quality hoops for ongoing projects and not have to purchase a lot of them. You can also…

Downloads
705
Likes
225
Rating
5
P
Printablesrangerer

Embroidery Hoop (F360 Parameterized)

This is a standard embroidery hoop that uses M3 fittings for the tightening mechanism. The default size has an inner hoop diameter of 80mm and a mesh file is included for that size. Please note that this model should be sliced with pauses…

Downloads
253
Likes
55
Rating
4.67
P
Printabless0a

iFlight BumbleBee Cinewhoop GoPro mount

Simple GoPro mount for the iFlight BumbleBee Cinewhoop. Made with PLA/PLA+.

Downloads
35
Likes
1
Rating
0
P
PrintablesSTRIKING FPV

V3 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop

This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…

Downloads
6,785
Likes
512
Rating
4.5
P
PrintablesMakerMeik

BetaFPV Air Canopy for lower cam angles - For Air65 and Air75 Tinywhoops

This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…

Downloads
2,928
Likes
198
Rating
5
P
PrintablesKeiranSolaris

Embroidery Hoop (Multiple Sizes)

My wife wanted some embroidery hoops in fun colors for display of her projects, 3D printer to the rescue! I printed these with 20% cubic infill with 3 walls in Prusament and Printed Solid Jessie PLA. No supports needed. I've uploaded a…

Downloads
2,602
Likes
311
Rating
4.92
P
Printablesledrone.club

The PickleWhoop (20, 25 & 30) : cinematic whoop frame

Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Check those accessories for the PickleWhoop by Milo Perriand (Full GoPro mount,…

Downloads
1,460
Likes
189
Rating
5
P
PrintablesSTRIKING FPV

V2 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop

IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…

Downloads
1,270
Likes
97
Rating
0
P
PrintablesHenriDIY

Spiral Hoop Gear

Interesting and rare gear design. I could't find any information about this or what it is even called, but luckily nice people from Reddit helped me to figure it out. One interesting example of usage is in motion picture camera patent…

Downloads
1,250
Likes
205
Rating
4.8
P
Printablesaiye

1/18th scale whoops

Some whoops that can be made as long or short as you want them to be. The ends are reversible, and you can add as many middle sections between them as you need. They have holes to add the connectors in to help keep the pieces from moving…

Downloads
1,243
Likes
182
Rating
4.5
P
PrintablesKrhom

DJI O4 Air Unit Whoop Canopy

Print in TPU, organic tree supports. I weighed it at 1.7g. There's room to make it lighter for sure, but I also want it durable. Feel free to give me feedback!

Downloads
1,074
Likes
72
Rating
5
P
Printablesmelnikod

BetaFPV Air65 Tinywhoop Case

Case for the BetaFPV Air65 TinyWhoop

Downloads
971
Likes
102
Rating
5
P
Printableswrcrooks

Micro Quad (Whoop) Brushed Drone Frame

If you like this model, please consider a donation: Buy me a coffee link Print Settings Layer Height: 0.2 Wall Line Count: 4 Top/Bottom Layers: 5 Infill: 100% Other Parts: 8520 Brushed Motors Flight Controller (Mount was designed for…

Downloads
855
Likes
45
Rating
5
P
PrintablesCygwulf

Embroidery Hoop Stand

My wife has recently become very enthusiastic about her cross stitch, and she wanted an embroidery hoop stand to hold her work. I spent a little time in Tinkercad and came up with this. I printed in PLA, though if parts fail I will…

Downloads
814
Likes
253
Rating
4.71
P
PrintablesBlueprint 3D

65mm Tiny Whoop frame

Just a simple 65mm Tiny whoop frame, planning on building more versions that are more robust and lightweight versions

Downloads
788
Likes
52
Rating
0
P
Printableskoiiiak

75mm Tiny Whoop frame

Just a simple 75mm Tiny whoop frame

Downloads
783
Likes
44
Rating
0
P
PrintablesKPV

TinyWhoop Gates - PVC Pipe Connector For Any Size of Pipe

Features Fully customisable to suit any diameter of PVC pipe and to suit your own printer tolerances. Accurately calculates the length you need to cut your PVC pipe to in order to achieve a specific dimension (see OpenSCAD console…

Downloads
764
Likes
249
Rating
5
P
PrintablesspectrexFPV

WhoopStor V3 Charging Dock

-------------------------------------- V3.1 IS HERE--------------------------------------- C hangelog: [2024/12/31] - v3.1 partial upgrade Improved power input cutout fitment Improved exhaust fan cutout Reduced pusher gap Increased width…

Downloads
742
Likes
128
Rating
5
P
PrintablesMartin

Thicker BetaFPV Air Canopy for lower cam angles - For Air65 and Air75 Tinywhoops

Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it

Downloads
707
Likes
73
Rating
5
P
PrintablesFractalengineer

Fractal F65 & Pro, F75 & Pro Max Whoop - Official 3D Printed Files

More info here for kits and BNF Print the cam holders in TPU, 0.3mm height, 0.48mm width. F75 Pro Max Ducts: Experimental, print at your own risk 😛 Print in PETG, PA or HIPS; any high impact plastic should do. Then insert the struts into…

Downloads
707
Likes
54
Rating
5
P
PrintablesSteed's Yachts

Desktop Basketball Hoop

This mini basketball hoop is amazing! A great gift for fans of basketball and other sports, this desk ornament is a must-have. It's designed to match NBA standards and requirements, scaled down to the mini version. Print Instructions:…

Downloads
680
Likes
26
Rating
4.5
P
PrintablesCrytorious

Modular Tinywhoop Stand for 65mm, 75mm and 85mm drones

I wanted to have a neat way to display and store my drones on my shelf, but i wanted it to be modular and easy to print. I tried to find something fitting online, but couldn't find anything that really met my expectations, so i hopped…

Downloads
674
Likes
81
Rating
5
P
PrintablesMorzax

Earring Hoop Holder add-on for Jewelry Display / Jewelry Stand

This is an addition designed to seamlessly integrate with the established "Jewelry Display / Jewelry Stand"

Downloads
643
Likes
176
Rating
4.67
P
PrintablesAAME

PiXeL - Micro fpv drone racer frame - tiny whoop pusher style

I tried to design an indestructible frame taking advantage of Prusa XL multi material print capabilities. My configuration: LIPO: 2S 450mah FC: Flywoo GOKU F405 HD 1-2S ELR AIO V2 Motors: HGLRC SPECTRE 1202.5 Motore Brushless 11000KV…

Downloads
608
Likes
117
Rating
5
P
Printables侠'world

Tinyflex HD - 75mm rubber whoop - O4 lite

Tired of snapping carbon fiber arms or cracking rigid plastic frames during basement laps or sidewalk proximity flying? This 75mm micro frame is designed specifically for durability and flexibility, utilizing the unique properties of TPU…

Downloads
600
Likes
344
Rating
0
P
PrintablesPJC 3D Printing

Whoop MG/5.0, Adapter For 4.0 Bands

Optimised for printing with a .4 nozzle with a line width of 0.4 in PETG (Dry). Any layer height should be fine, I used 0.28. The adapters should be a snug fit and slide in without a lot of force, if they are too tight or too loose try…

Downloads
546
Likes
25
Rating
0
P
PrintablesQuicksilver

Prop guard for 5 inch CineWHOOP Quadcopter

Prop guard for your 5 inch :) Holes on the sides, if you want to add rigidity by printing connecting rods. Mirror to get the other side. Some frames have the motor mount holes angled relative to the frame, if so let me know. Category: R/C…

Downloads
540
Likes
23
Rating
5
P
PrintablesAlex Veden

Happymodel Mobula7 V2 frame / 75mm tinywhoop

In case somebody needs a 3d model of mob7 frame for making custom canopy or whatever. The model is accurate to the production frame except symmetrical motor arms and straight duct profile.

Downloads
536
Likes
31
Rating
0
P
PrintablesCoded

Whoop Prop Removal Tool

Required parts: Sim Removal Tool (What I used) https://www.amazon.com/dp/B099ZHQZ2F?psc=1&ref=ppx_yo2ov_dt_b_product_details https://www.amazon.com/MMOBIEL-Card-Removal-Smartphones-Ejector/dp/B097RDGRR2…

Downloads
520
Likes
111
Rating
4.6
P
Printablesledrone.club

The PickleWhoop V2 (25) : cinematic whoop frame

Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Updates 2026/09/14 : added frame STEP files + DJI O4 Wide cam mount 2025/01/16 :…

Downloads
502
Likes
51
Rating
0
P
PrintablesJIJI 3D

Wedding Hoop Centerpiece and Table Number

This wedding floral hoop centerpiece and table number is a multipurpose print to save money on your special day! The model's dimensions are split into three different pieces: The hoop The base The number (numbers are being uploaded…

Downloads
494
Likes
134
Rating
5
P
PrintablesCurlyVole

Tiny Whoop Drone Racing Gate (fully printable, parametric, magnetic)

Print your own Tiny Whoop Gates! I hope this serves you well and feel free to give me any feedback or ideas for improvements. Have fun! Main loop This split into several parts (e.g. 4 or 6). These are just stuck together and hold well.…

Downloads
493
Likes
89
Rating
5

betafpv c03 ultralight camera mount for 65mm whoops all common angles

the camera mount from the five33 whoop These mounts are designed and used by Team BlueEyes in the Italian Whoop League 30 deg 35 deg 37 deg 40 deg print settings: infill: 100% use tree supports fillament: tpu .2 layer also on thingiverse:…

Downloads
471
Likes
29
Rating
0
P
PrintablesHollaDaywalker

Office Trash Can Basketball Hoop

We all want to do it! Ball up that piece of paper and take the shot! This is not simply throwing away the trash. No! This is the moment, the game is here, now! You shoot! Buzzer rings! The trash ball sores through the air. Time slows down…

Downloads
470
Likes
130
Rating
5
P
PrintablesRygar1432

65mm Whoop Frame / 40mm Props / 21g / Micro Quad

THIS IS A 65mm MICRO WITH 40mm PROPS THAT WEIGHS 21g AWG!!!!!!!!!!!!! Back in the day when Tiny Whoops hit the market the average weight was around 21-22g with brushed motors and 31mm props. It's crazy to think in just a few years we can…

Downloads
463
Likes
69
Rating
5
P
PrintablesSisul

Embroidery hoop

Embroidery hoop, inner diameter 140mm, height 10mm Additionally needed: M3 x 30mm hexagon bolt with matching wing nut

Downloads
451
Likes
119
Rating
5
P
PrintablesTronnic

BetaFPV Meteor 75 Pro Whoop Box - Carrying Case

I was looking for a carrying case for my BetaFPV Meteor 75 Pro FPV Quadcopter that holdes my drone as well as accessories like batteries, charger, tools, props and a powerbank. Since this is very specific, I didn't find anything out there…

Downloads
451
Likes
76
Rating
0
P
Printablesjankenpwn

Basketball Mini Hoop for Kids

This is a mini basketball hoop for small ~110mm diameter basketballs. It's suitable for toddlers and small children. The hoop can be mounted securely using the screw holes. v2 adds additional chamfers to support the hoop and cutouts on…

Downloads
447
Likes
31
Rating
5
P
Printablesemtrax

2.5″ Cinewhoop (20x20 Stack)

This project was actually just for fun....but it ended up flying (unexpectedly) very well. All you need additionally are 14 pieces of m3 18mm nylon standoffs. My Configuration: Stack (20x20): Mamba F405 MINI MK2 + F30A, AKK FX3-Ultimate +…

Downloads
446
Likes
71
Rating
5
P
Printablestkramm

WhoopBox - A Rugged Tiny Whoop Box

Made those two versions for my whoops to be able to just toss them in my FPV backpack. The 65mm version requires 6x M3x20mm screws. The 75mm version requires 6x M3x30mm screws. The parts called multipart are STLs with multiple bodies in…

Downloads
438
Likes
103
Rating
5
P
PrintablesJoshua

Basketball hoop

Basketball hoop

Downloads
434
Likes
26
Rating
0
P
Printablesedwardsch

Tressym Joker tinywhoop canopy (supports DJI O4 Lite, BetaFPV P1, HDZero Lux, HDZero Eco, NBD BeeEye, BetaFPV C03, Tinywhoop Pinch, Caddx Ant Lite)

In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…

Downloads
397
Likes
35
Rating
4.5
P
PrintablesIgor Štangelj

Mighty Hoop 5.5 Backing Holder

Helps you hold backing on hooping. Much easier to align. Remove before embroidery.

Downloads
390
Likes
14
Rating
5
P
PrintablesBacon2002

Whoop canopy

This is a strong and light Tiny Whoop style (25.5 x 25.5 mounting) canopy specifically deigned to accept: HDZero - Nano camera (also other 14mm nano style cameras) Happymodel - ELRS PP / EP2 receivers (the RX fits behind the camera on a…

Downloads
383
Likes
45
Rating
5
P
PrintablesCarlos

Whoop and Toothpick Battery holder for 1S and 2S

I'm not a massive fan of using rubber bands to hold batteries on toothpicks so I design a folding battery holder for 1s batteries. It can fit small batteries like 300mah square shape or the larger 450mah+ rectangle batteries. It fits…

Downloads
382
Likes
40
Rating
5
P
PrintablesZona 3d

Basketball Hoop with articulated net and airless basketball

This is a neally print in place basketball hoop. Please be careful when printing the net ( just remember where each one goes) You can use a hook or 2 screw to place it on the wall. I also include an airless basketball. If you want to…

Downloads
376
Likes
28
Rating
0
P
PrintablesMr.melted

tiny whoop 30mm toroidal props 2-6

this is a toroidal prop for tiny whoops like the eachine e010 that use a 30mm prop and 0.5mm motor shaft after testing the hole is to small to be properly printed will update the size soon

Downloads
374
Likes
40
Rating
5
P
PrintablesInax 27

Basketball hoop

This is a 20 cm miniature basketball hoop created to look and feel like a real hoop, but in a compact version. However, since the net hooks are very thin, they are not included directly in the printable model, as they may not print…

Downloads
373
Likes
17
Rating
0

Baseball Hoop Earrings

This design was requested by co-workers of my wife. I had seen some made of wood but haven't seen any for 3d Printing. This is a 2 color design the base is red and the top is white for my design. Any questions? Feel free to message me.

Downloads
368
Likes
103
Rating
5
P
PrintablesKonkombre

The Backpack Toothbrush ! - toothbrush case with hoop

I designed a toothbrush case for travelling that you can print with a hook or not depending if you want to attach it to your bag for exemple, comes handy if you are stuck at the airport. List of cool features : You can screw it Comes with…

Downloads
368
Likes
77
Rating
5
P
PrintablesDaDesasta

PVC Pipe connector (20mm) for tinywhoop gates

I needed a quick and simple way to connect lengths of PVC pipe together without buying expensive connectors. In my case DIN EN 61386-21 with an outer diameter of 20mm Printtips The files print without support and should be correctly…

Downloads
365
Likes
59
Rating
5
P
Printables8x8

Cinewhoop FPV Drone frame

Content : These are the STL files of the differents parts of the frame. Be careful, all the parts are not made of the same material (see Print Settings). There are 3 version of the bottom frame : 20x20 M2 = use for ESC / FC with M2 screw…

Downloads
365
Likes
79
Rating
0
P

Lumenier qav-pro micro whoop DJI O3 Air Unit

I designed this part to fit my DJI O3 Air Unit. As you can see on the pictures the big ass box fits right behind the cam. I used double sided sandwich tape in-between to stick it to the upper frame part and secured it with a zip tie. I…

Downloads
362
Likes
22
Rating
5
P
PrintablesJorg1d

HDZero Whoop Lite Canopy

Printet in 98A TPU, tested OK with both 0.15 an 0.20 layer height. Without the bottom plate it comes out lighter than the one delivered with Moblite 7 HD :)

Downloads
361
Likes
51
Rating
4.67
P
PrintablesSteve DeGroof

Parametric Embroidery Hoop

OpenSCAD code to generate embroidery hoops at any diameter. I've included 3", 5" and 7" STLs. Best if printed in PETG. You'll need an M4x35 hex socket head cap screw and 2 M4 nuts to assemble. One nut goes in the knob; one in the hoop to…

Downloads
359
Likes
101
Rating
0
P
PrintablesKelly Maguire

Decorative embroidery hoops for finishing work

I created these because I was frustrated by the lack of options for framing finished cross stitch projects. A springy insert provides tension from the inside. They are not really suited for working on a project due to the bracing in the…

Downloads
354
Likes
159
Rating
5

Hoop Hook

Hoop mounts for wall or ceiling

Downloads
346
Likes
30
Rating
5
P
PrintablesAndrás Bognár

Unbreakable Propeller Guard for CineWhoops (The Engineer's Approach)

Say hello to never buying another propeller guard for your cinewhoop :) Update 19.05.2024.: See the upgraded, better version here: https://www.printables.com/model/884159-unbreakable-propeller-guard-for-cinewhoops-upgrade A little back…

Downloads
345
Likes
36
Rating
0
P
Printablessanderpuh

Tiny Whoop fleet storage solution 65mm 75mm

Store up to 4 standard size 65mm whoops (or 5, it's possible to slide one more into the center). Includes an additional compartment with optional insert to separate batteries into two groups. This compartment can also be used to store…

Downloads
344
Likes
50
Rating
5
P
PrintablesCarlos

Ultra light hdzero eco and pinch camera whoop canopy

Designed for the hdzero eco camera it will also work with the analog pinch cam. Weighing in at 0.68g this is one of the lightest whoop canopies you can use that actually protects the camera, (your weight can vary on the type of tpu, your…

Downloads
342
Likes
10
Rating
0
P
PrintablesFrodo

Print in place tiny whoop drone frame

Note : I made this frame as a prove of concept and to see if it was possible, not because it will work well. You can build a flying drone with it but if you want to build and actual fly a tiny whoop, joust get a real, injection molded…

Downloads
340
Likes
37
Rating
4
P
PrintablesSTRIKING FPV

V1 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop

IGNORE this version, we're onto V3 already! These have since been superseded by my second generation design , but for posterity I'm uploading it here so we can see how terrible they are compared to the newer ones. Also, here's the first…

Downloads
328
Likes
39
Rating
0
P
PrintablesCraftyFPV

Whoop canopy - Improved Fastback

Enhanced Fastback Canopy for TinyWhoops: This version offers additional mount points and is optimized for weight reduction compared to its predecessor. I advise using the 4.1 variant; the ELRS tray in the 4.0 model isn't effective and…

Downloads
323
Likes
28
Rating
5
P
PrintablesT_______

Little Tikes Basketball Hoop Height Hinge

0.2mm resolution works fine. Print flat on back of part

Downloads
321
Likes
19
Rating
4.67
P
PrintablesChris Thijssen

Tiny Whoop

Fully printable tiny whoop racing drone. Smallest possible frame wheelbase is 65 mm but with 40mm props. Bumper size is 92mm. Hardware: -Zeus 5 FR (spi rx REDPINE) (has Blackbox) -Zeus 5 Wifi version with no Rx (for my crosfire version)…

Downloads
320
Likes
63
Rating
5
P
Printablesknoopx

65mm Pusher Tiny Whoop Frame

Mobula6 / Meteor65 compatible frame. Print in PLA, PETG might work but found mine to flex too much. Print slow, will make it stronger. After printing break the supports under the ducts and FC mounts. You might need to re-drill holes on…

Downloads
317
Likes
26
Rating
0
P
PrintablesDohara

Baseball Earrings Hoop and stud

Baseball Earrings Hoop and stud Raised (Filament swap) and Flat (AMS) I Prefer the raised even though I have an AMS. I have uploaded the bambu studio 3mf files as well as the stl. I printed in a .2 nozzle on an A1 mini Check out my other…

Downloads
317
Likes
66
Rating
0
P
PrintablesDash0408

Basketball Hoop For Door

Over-the-Door Mini Basketball Hoop (Chain Net Edition) Bring the court to your room or office with this fully 3D-printable basketball hoop! Designed with a sleek, interlocking "chain" net. It’s the perfect desk accessory for quick breaks…

Downloads
307
Likes
25
Rating
0
P
PrintablesJarda

Garden Plant Support – Plant Support Hoops

Garden Plant Support – Plant Support Hoops Print instructions Plant support hoop with full round shaped hoops. Size: 140x146x4,2mm for .amf .gcode (140%) Size: 80x128x3mm for .stl ( 100%)

Downloads
305
Likes
82
Rating
5
P
PrintablesButcher

4" drone whoop frame

My 4 inch drone whoop frame. Suitable for normal 5" drone parts with 30.5x30.5 stack.

Downloads
301
Likes
36
Rating
0
P
PrintablesGrant Larchar

Basketball hoop egg separator

this is a mini basketball hoop that has a hoop to strain out the egg that you can 3d print. it clips to a bowl.

Downloads
297
Likes
34
Rating
0
P
PrintablesBauschlumpf

Cap hoop for Janome / elna RE20b or type b (like HH10b)

This addition enables the embroidery of baseball caps with the Janome Memory Craft 300E, 350E, 400E, 500E, 550E, 9500, 9700, 10000, 10001, 11000, 11000SE in combination with the RE20b or type b frame. In the version before V2, the…

Downloads
293
Likes
33
Rating
0
P
PrintablesFr1tesForev3r

Basket Ball Mini Hoop

A little basket ball hoop to improve your skills at home ! Simple to print, just requires supports if you print it with the hoop facing upwards (I recommend printing that way). Ball not included. STRONG VERSION COMING SOON

Downloads
292
Likes
13
Rating
0
P
Printablespovsky

Basketball Hoop Net Clip

Basketball net clip for 3/8" rims with flat head standoffs (shown in pictures). Will click into place, orient net slot away from the center of the hoop.

Downloads
287
Likes
26
Rating
5
P
PrintablesNoahLikeTheArk

Tiny Whoop Camera Mounts - Caddx Ant, Foxeer Pico, FX965TW Pitch

Camera mounts for: Tiny Whoop FX965TW Pitch (11mm x 11mm) Foxeer Pico (12mm x 12mm) Caddx Ant (14mm x 14mm) FPVCycle 199C (12mm x 14mm) I've printed the 30 degree mounts without supports. The top bridge is the hardest, it may need to be…

Downloads
279
Likes
25
Rating
0
P
PrintablesBurnsipoo

Mini Hula Hoop

Made a mini Hula Hoop for my kids to play with

Downloads
277
Likes
12
Rating
5
P
PrintablesCarlos

Whoop canopy for hdzero and walksnail

I like the whoop canopy made by happymodel and also saw that rotor riot develop a tpu version for their vision whoop, but I don't like how heavy it is. So I created my own version which weighs less and protects hdzero v3 cams better. Some…

Downloads
277
Likes
26
Rating
5
P
PrintablesAndrás Bognár

Unbreakable Propeller Guard for CineWhoops – Upgraded version

After a year of use of my original design I refined it to make the outer ring more flexible but the inner part more rigid and durable. I also shaved off 3 grams! Let me know your experience with these parts in the makes & comments…

Downloads
272
Likes
30
Rating
0
P
PrintablesRygar1432

Brushless WHOOP 65mm 24g or 64mm 21g!

Tired of the same old whoop frames breaking? Whatever your poison 1s or 2s, this should fit the bill. Yet Another rendition of my past designs. An actual whoop 64mm size with 31mm props and the latest brushless motors along with all the…

Downloads
264
Likes
36
Rating
0
P
PrintablesRunningTurtle08

Mini desktop basketball hoop

A simple but fun basketball hoop for your desk

Downloads
256
Likes
15
Rating
0

Basher - Tiny Whoop Frame

This is the Basher. It is an easy to print tiny whoop frame for the larger 716 coreless motors. The battery is held with rubber bands. Optimized for 0.6mm nozzles. No supports needed. There are 2 versions to choose from: whoop: weight is…

Downloads
253
Likes
21
Rating
0
P
PrintablesWilliam McCann

Tiny Whoop Canopy

This is my remix/take on the Canopy used by Mr Shutterbug in his Emuflight DAS video. He stated that he used a model that was remixed by marblekit from a design by DaveC. I found that the camera angle was way too high for my liking and so…

Downloads
252
Likes
19
Rating
0
P
PrintablesJimReplicates

Quidditch Pong Hoops (Unofficial)

(Also Quidditch Beirut, for the traditionalists ;) ) This is a simple "Quidditch" hoop set for the increasingly popular Quiddich Pong game. Its basically American Beer Pong with hoops added to the game board for more complex gameplay. I…

Downloads
252
Likes
26
Rating
4.75
P
Printablesslavik kopanov

Simple Hair Hoop

I designed this Simple Hair Hoop in SOLIDWORKS for the Printables Hair Accessories contest (21/07/2023). It's an easy print in STEP & STL & 3DM files, already orientated correctly. Supports: Although this model was designed specifically…

Downloads
251
Likes
40
Rating
1
P
PrintablesSixFootFive

Hoop Game Kit Card

A simple little design that allows you to catapult the ball into the hoop. The catapult base needs some improvement, but if you hold it down with a finger, it works fairly well. The net is also a bit of a work in progress, as it may need…

Downloads
250
Likes
99
Rating
0
P
PrintablesGromfrogRyan

Medium Hoop Chain Mail

Our medieval chain mail that we posted here a few days ago is printable but is very fine and the printer will require alot of calibration. But now we have finally made a bigger hooped version that should be easier to print on printers…

Downloads
248
Likes
30
Rating
0
P
PrintablesLayerShare

75mm Tiny Whoop Drone & accessory case

Made for Mobula7, likely suitable for most 75mm Tiny Whoop drones. YMMW

Downloads
245
Likes
33
Rating
4.75
P
PrintablesDohara

Basketball earrings Raised stud and hoops

Basketball earrings Raised stud and hoops. Layer color change. I have uploaded the bambu studio 3mf files as well as the stl. I printed in a .2 nozzle on an A1 mini I use bambu studio, add the 2 stls and click yes to load as one object.…

Downloads
241
Likes
39
Rating
0
P
PrintablesspectrexFPV

Tiny Whoop Hard Cases [Complete Set]

Hard Case for Tiny Whoops Features: Protection - hard case (PLA/PETG) for 65mm tiny whoops Ergonomics - rounded edges with no corners, no more cuts during winter seasons Ease of use - the lid featured pull tab flanges for easier access…

Downloads
240
Likes
16
Rating
5
P
PrintablesTonky

BetaFPV Meteor 75 Pro Whoop Travel Box | Magentic Lid

This is my attempt to make a traveling box / case for the BetaFPV Meteor75 Pro. Lid_V2 comes with round handles to make opening easier. Printing instructions still apply. Works with V1 box Box_V2 updated to have keying for V2 lid.…

Downloads
238
Likes
34
Rating
0
P
PrintablesXeromool

65mm Tiny Whoop Nano Frame

I created these Whoop frames specifically for the Tiny Whoop Nano FC. UPDATE: Made quite a few changes and am pleased to say I am happy with the final result. I designed the 65mm frame as I felt the 55mm was getting too much washout for…

Downloads
236
Likes
22
Rating
5
P
PrintablesJamesTK_

Car Headrest Basketball Hoop

Designed this so my 2-year-old could shoot hoops while in his rear-facing car seat. Mounts through the headrest posts of our 2019 Toyota RAV4. I assume this is likely compatible with other Toyota vehicles, as well as a good deal of other…

Downloads
233
Likes
29
Rating
5
P
PrintablesMattfranc96

Mighty Hoop 5.5 frame

A hoop for the Mighty Hoop 5.5. Due to the low surface area, I would recommend printing in PLA with an inner brim.

Downloads
230
Likes
14
Rating
0
P
PrintablesAbstractiaDsgn

Modern Nordic Hoop Vase

simple nordic hoop vase. Likely needs internal supports but its a nice look

Downloads
230
Likes
40
Rating
0
P
PrintablesNinova66

Leveling Stand for a 75mm Whoop Frame

Here's a stand I made to help me calibrate my accelerometer on my 75mm frame whoop frames. Tested on the following -King Kong (LDARC) Tiny 7 -Crazy Pony Frame -Boldclash B06 -Mobula7 HD -Trashcan

Downloads
225
Likes
18
Rating
5
P
PrintablesVincent George

Basketball hoop (with balls)

A small hoop that includes 3 small basketballs.

Downloads
223
Likes
5
Rating
0
P
PrintablesvagueDirector

20x20mm to 25.4x25.4mm adaptor for whoop flight controller stack mounting

Simple adaptor for mounting a whoop stack to a 20x20 mount, can be reversed to do the opposite. I will be using it to mount a happymodel diamond dvr vtx to a 20x20 mount. Holes should be tight enough for the screws to bite, so nuts…

Downloads
222
Likes
10
Rating
0