Search results: hotbed

Sort order

62 models

P
Printableskjs

Hotbed cable chain Anycubic Mega S

As I feared that the hotbed cable may break over time due to constant sharp bending I searched for a solution and ended up here: https://www.thingiverse.com/thing:4318284. I really liked the chain design but not that I would have to…

Downloads
478
Likes
83
Rating
4.75
P
Printablessockergris

Ender 3 V3 KE hotbed mount plate

Welcome to a printer friendly version of this CNC machined model , which in itself is a remix of NeedItMakeIt's linear rail upgrade project . The one you see in the pictures above is the 12H version, printed out of PA-CF, 0.4 nozzle,…

Downloads
465
Likes
136
Rating
5
P
PrintablesRoLL

Anet A8 Hotbed Spring Bushing

These buhing are designed to fit to spring base shape, in such way that when tightening there is no deformation Print Settings Notes: Layer Thickness 0.1mm Speed 5mm/s Category: 3D Printer Parts

Downloads
226
Likes
17
Rating
5

Elegoo hotbed scraper

Elegoo Hotbed Scraper This ergonomic, branded tool is designed specifically for Elegoo 3D printer users to ensure safe and efficient removal of prints from the build plate. The handle features the official ELEGOO logo and a slim profile…

Downloads
138
Likes
14
Rating
5
P
PrintablesSIGMA LAB

PRINTBED SCREAPER 1.0 (HOTBED SCREAPER)

Printable screaper for printbed

Downloads
120
Likes
6
Rating
4
P
PrintablesSolomoriah

Hotbed Strain Relief for Ender 5 Plus

This is a remix/redesign of BGDog's Ender 5 Plus hot bed strain relief as posted over on Thingiverse. It doesn't seem to be here, so I have not marked it as a remix, but it is. You can find the original design here:…

Downloads
115
Likes
14
Rating
5
P
Printablesnetwalk

Griffe für 3D-Drucker Einstellfolien mit Ständer / Leveling Hotbed Druckbett

Kleine Einklemm-Griffe mit passendem Ständer für Stahlblech Folien 5x10 cm (z.B. von Princore.de) für das Leveln des Druckbettes. Die angebotenen Griffe zum Einkleben wollte ich nicht. Im Halter und im Clip habe ich jeweils ein Stück…

Downloads
112
Likes
7
Rating
5
P
PrintablesPiotr Kubicki

Hotbed cable frame clip for Sovol 06 Plus

A simple clip to prevent the hotbed cable rubbing against frame. It was designed for Sovol sv06 Plus but should fit other similar printers too. The clip holds the cable very well but there is a small slot for a zip tie if you want extra…

Downloads
100
Likes
10
Rating
0
P
PrintablesMegatron40

Anycubic i3 Mega S hotbed cable clip

print on the side with supports in the U cable channel, see slicer picture. 8-1-2022 Started sagging after a while, updated the bottom with a slight angle and added a ramp on the channel to keep cable up.

Downloads
94
Likes
12
Rating
0
P
PrintablesUros Milost

Ender3 S1 pro HotBed handle

The handle provides two positioning holes for fixation of a accelerometer adxl345 in addition offers easier positioning of the PEI plate. the handle is high enougth to position the PEI plate at the front with the handel. the model should…

Downloads
70
Likes
13
Rating
0
P
PrintablesPancer

Nebula camera hotbed easymount for Ender-3 V3 SE KE

Nebula camera holder for Ender-3 V3 SE KE printers. Does not interfere with print head in any position on my Ender-3 V3 KE, I believe it will be the same on SE but give me a sign if someone tested this on SE. I made it with PLA. PETG…

Downloads
65
Likes
10
Rating
0
P
PrintablesKdyrja

Anycubic i3 mega magnetic hotbed (MK52 prusa)

belt holder for anycubic i3 mega with prusa mk52 12v hotbed (prusa mk2.5/s) If you have a 24V power supply use a 24V heatbed of Prusa mk3/s You need: 1x mk52 hotbed with magnets 2x M3 nut 3x M4 nut 6x springs (8x20mm) 6x M3x30 countersunk…

Downloads
58
Likes
16
Rating
0
P
PrintablesT Fricke

Sovol SV08 Hotbed Mount

This is yet another hotbed mount for the Sovol SV08. It is a remix of the original design. This was inspired by several other options to fix the taco beds already out there. This mount is designed to work with silicone spacers; you will…

Downloads
53
Likes
18
Rating
0
P
PrintablesAdam Oellermann

Strain Relief for Alfawise U20 One Hotbed Cable

Sometimes I feel like I'm the only person in the world with an Alfawise U20 One. Superficially similar to the Alfawise U20, it really is quite different - different board, different wiring harness, different hotbed, different y-carriage…

Downloads
47
Likes
2
Rating
5
P
PrintablesLuigisvc

Filament Hotbed Dryer

Designed this adapters to allow use of you hotbed as a filament dryer. I used a 5V 4010 fan in order to extract humid air during the process, used an old USB cable to adapt the fan directly to USB port. The base is to supply a clearance…

Downloads
45
Likes
11
Rating
0
P
Printablesdralois

Elegoo Neptune 3 hotbed wireguard for silicone mounts

Replacement for the standard part, as it isn't wide enough in the middle to allow exchanging the plastic mounts for silicone ones. I had to cut the old part off and acetone weld the replacement part to make it work, but your milage may…

Downloads
43
Likes
8
Rating
0
P
PrintablesAnymars

Anycubic Kabelhalter Hotbed

Dieser Halter wird hinten einfach auf die Platte des Anycubic I3 Mega / Mega S unter dem Hotbed aufgesteckt und schont das Kabel sowohl bei der Befestigung, wie auch bei den Bewegungen während des Betriebs.

Downloads
42
Likes
8
Rating
5
P
Printablesiaco

Sapphire pro hotbed cable holder

Original from Simon Larsson . Print Settings: Rafts: No Supports: No Resolution: 0.2 Infill: 40% Filament brand: Any Filament color: Any Filament material: PLA/PLA+

Downloads
41
Likes
4
Rating
0
P
Printablesice_3D_printed

Hotbed Tpu Spring

i lost one so i Just needed one so i made one i Thinkercad it is for tpu you can also make it in othe metral

Downloads
40
Likes
3
Rating
0
P
Printables3D_Devil

Reborn 2 Hotbed build plate stop Update

Update 3/11/2024 Modified rear to be thinner for clearance if you like me have spools inside Updated build plate stops - Just mirror for other side. I used 2 M3 with washers and m3 nuts. Fits on existing holes on bed plate - Use ASA or…

Downloads
39
Likes
6
Rating
5
P
PrintablesTyler

MKS HOTBED-MOS+ V1.0 Enclosure

I needed a box to house the MKS Mosfet that went with the MKS Gen v 1.4 and didn't find any that I liked so I made a new one. The lid should pop on and off with locking tabs. There are 2 options for each part. The Lid Passive ventilation…

Downloads
38
Likes
1
Rating
0
P
PrintablesJulian

Anet A8 hotbed support plate

hotbed support plate for Anet A8

Downloads
38
Likes
0
Rating
0
P
PrintablesPiotr Kubicki

Hotbed chain attachment for Ender 3 V2 Neo

I couldn't find any attachment that would fit the Ender 3 V2 Neo printer, so I made this one. You can attach it to the PSU, so your cable is no longer rubbing over other parts. As PSU can get quite hot, it is recommended to print it with…

Downloads
34
Likes
5
Rating
0
P
PrintablesMarcos Aurelio

K1 Max hotbed front cover, trim cover

Avaliable in Cults: https://cults3d.com/:3463836

Downloads
32
Likes
4
Rating
5
P
PrintablesCarlos Alberto

HONEYCOMB FOR CLEANING THE HOTBED.

Feel free to adjust the Z size if you don't want to use as much filament. I have used it with 0.4mm. This 3D design, created by me, is a honeycomb structure specifically designed for cleaning hotbeds. The purpose of this design is to…

Downloads
29
Likes
1
Rating
0
P
PrintablesMr Ziemia
Downloads
28
Likes
4
Rating
0
P
PrintablesJiri Krampota

Elegoo Neptune 3 pro držák kabelu hotbed cable holder

Protože se mi zdálo, že se kabel při tisku nadměrně zatěžuje a nechtěl jsem ať se ulomí , nakreslil jsem tento držák kabelu. Přilepeno sekundovým lepidlem. Výplň 40% Vrstva 0,2 mm Podpora ANO Since it seemed to me that the cable was under…

Downloads
27
Likes
3
Rating
0
P
PrintablesAshteroid

i3 Mega HotBed Cable Holder

This is a simple Hotbed cable for the i3 Mega, the print is small and simple and easy to attach How to Attach Record the height of your bed in the 2 screws on the right side since you'll be loosening the screws Unscrew the 2 right side…

Downloads
26
Likes
2
Rating
0
P
PrintablesBlueSkyMum

AC chassis bracket remix for kjs hotbed cable chain

I needed the cable chain to stop the hotbed cable rubbing, but the chassis bracket was too big to allow the large bed levelling knobs to pass. I remixed just the chassis bracket so that I can still use the big wheels, which was a must,…

Downloads
25
Likes
3
Rating
5
P
PrintablesMr Ziemia

ADXL345 mount for Artillery Hornet (bed/hotbed)

ADXL345 mount for Artillery Hornet (bed/hotbed)

Downloads
24
Likes
5
Rating
0
P
Printablesnetwalk

Anycubic Mega Pro Hotbed Griff

Ein kleiner Hotbed Griff, der in Verbindung mit dem Y-Spanner ( https://www.thingiverse.com/thing:5239491 ) ausreichend Abstand zum Carriage ( https://www.thingiverse.com/thing:5239507 ) besitzt. Durch die weitestgehend geschlossene Form…

Downloads
24
Likes
8
Rating
0
P
PrintablesItzAsila

(8mm Spring) Anycubic i3 Mega 3.8mm and 4mm Hotbed Cable Holder

Having trouble with another platform so I'm moving over to this platform… These models are my repost.

Downloads
23
Likes
2
Rating
0
P
Printablesclickbangdead

Hotbed carriage for linear rod upgrade for Voxelab Aquila Y-Axis

This is a hotbed carriage for linear rod upgrade for the Voxelab Aquila printers Y-Axis. This is designed to be used with the Y-axis rod mounts from https://www.printables.com/model/446502-ender-3-v2-x-and-y-linear-rodshaft-upgrade. This…

Downloads
22
Likes
3
Rating
0
P
Printablesrosnet

Crazy3DPrint CZ-300 Cover for Hotbed End Bracket

This printer makes good prints, and just begs to be upgraded in the spirit of the original Rep-Rap Clamps might require clean up and some tuning, but when the cover clip on it stays on.

Downloads
22
Likes
1
Rating
0
P
PrintablesJ Estrada

Voron Legacy Z Bearing Retainers for 209mm Square Hole Hotbed

Many older MK1, MK2, MK3, and some MK4/5 heatbeds were specified with 209x209 hole spacing. These bearing retainers have been redesigned to fit those heatbeds. Since most folks will be tearing down their older i3/bed slingers to have fun…

Downloads
21
Likes
7
Rating
0
P
Printableskjs

Anycubic i3 Mega S forced hotbed cooling

The biggest advantage of the Ultrabase, prints stick extremely well to the bed, is also its biggest disadvantage. Usually one can only remove them once the bed has cooled down to 30°C. This can take quite some time as there isn't any…

Downloads
20
Likes
7
Rating
0
P
Printablesbassamanator

Anycubic Mega/S Hotbed Corner Cable Holder

This remix has an 8.5 mm hole to accommodate an 8 mm OD spring. Print with supports. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 200 Infill: 100 Filament: Eryone PETG Category: 3D…

Downloads
20
Likes
3
Rating
0
P
PrintablesMr_Dan

Anet8 / AM8 -Y-axis cable chain hotbed mount adjustable

I have remixed the part from Am8 cable chain hotbed mount v 1.1 by hoya7792 , thanks. I remixed to enable support for the power connector to the bed. ORIGINAL POST DATE 29-MAR-2019 Print Settings Printer Brand: Anet Printer: A8 Rafts: No…

Downloads
19
Likes
3
Rating
0
P
Printablesgolem

PET Kofola 2,25l Pařeniště (Hotbed)

Pro pěstování sazenic rajčat jsem vyrobil pařeniště z PET lahve od Kofoly 2,25l. Tato lahev je vhodná protože má rovné stěny. Nejprve se z lahve sejme etiketa, což jde kupodivu poměrně snadno. Potom se fixem označí a ostrým nožem odřízne…

Downloads
18
Likes
1
Rating
0
P
PrintablesLukeOne

L3D - Bigtreetech SKR 1.4 (Turbo) + MKS Hotbed Mos+ v1.1 Casing with Magentic Lid

A case for a SKR v1.4 (Turbo) Board and a MKS Hotbed Mos+ v1.1 Mosfet. Needs 1x 4010/4015/4020 Fan, 4x 6x1 Magnets, 8x M3x6 Screws + 8x DIN 934 M3 Nuts and 4 Screws (+Nuts) (Max. M4) for the Fan. Supports are optional if you master your…

Downloads
18
Likes
0
Rating
0
P
PrintablesJ Estrada

Voron Legacy Z Bearing Retainers for 170mm Square Hole Hotbed (Ender 3)

Many Ender 3 heatbeds were specified with 170x170mm hole spacing. These bearing retainers have been redesigned to fit those heatbeds. Since most folks will be tearing down their older i3/bed slingers to have fun and build the legacy,…

Downloads
17
Likes
3
Rating
0
P
PrintablesAlexander

Anycubic i3 Mega Hotbed Cable Cover

After I've printed these excellent levelling knobs ( https://www.thingiverse.com/thing:3145976 ), I needed a way to move the hotbed cable away. As I wanted to have a better solution then use zip ties, I've decided to play a bit with…

Downloads
17
Likes
0
Rating
0
P
PrintablesJesse

MKS Hotbed Mosfet Mounting Plate

This is a plate for the heated bed Mosfet MKS V1.0. It's to prevent accident electrical connections on the bottom of the PCB. It gets mounted with M3 screws and nuts. Nylon spacers (11mm) were put between the screws and nuts. The 3D model…

Downloads
16
Likes
0
Rating
0
P
Printablesprintyourfix

Anycubic Chiron hotbed wheels wheel

If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…

Downloads
15
Likes
1
Rating
0
P
PrintablesPandaFly

Hotbed Led Support Anet A8

I used some heat shrink tubing to fix my led strip because I can't trust the double sided tape of my ultra cheap strip and because the surface may not be smooth enough. But if you print the piece lie down on the led surface, it may be…

Downloads
15
Likes
0
Rating
0
P
PrintablesDmA81

Hotbed thumbscrews for Anycubic Prusa I3

Designed in Tinkercad to avoid bruising my fingers while leveling the print bed :). It's a tight fit for 11mm metal screws, but they work great. Print Settings Printer: Anycubic Prusa I3 Rafts: No Supports: No Resolution: 0.15 Infill: 30%…

Downloads
15
Likes
3
Rating
0
P
PrintablesErroXCoder

Cable Holder for the Hotbed of the Ortur Obsidian

Its for The Ortur Obsidian Cable Holder for the Hotbed origenal stl Data what in the sd card includetet. Es ist für Ortur Obsidian das Kabel Halterung für das Beheizbare bed was in der SD Carte dabei war. (Original STL) Print Settings…

Downloads
14
Likes
0
Rating
0
P
PrintablesStarwhooper

improved linear chain to Hotbed on Anet A8

The original doesn't fit best on my Anet A8. So I remix my own one. hotbed end: • cut the end to be able to move the bed to a lower position without colision with the bear steam • remove upper spacer • reduce elements change pieces: •…

Downloads
14
Likes
1
Rating
0
P
Printablestheidd

DA-VINCI-BIGGER-HOTBED-CARRIDGE

FOR DA VINCI MOD 5-2 https://www.thingiverse.com/thing:3646471 Category: 3D Printing

Downloads
14
Likes
0
Rating
0
P
Printablesrosnet

Crazy3DPrint CZ-300 Hotbed Sticker Alignment Tool

Print this item to align the 16x15 cm hot bed sticker in the center, then add pieces around it to fill the whole bed. No annoying seams thru the center where most smaller objects will be printed.

Downloads
13
Likes
1
Rating
0
P
PrintablesRed Haniwa

Parametric hotbed spring guide

A very simple spring guide, keeping your bed spring from jumping around and also add tension to your spring (could be a good or bad thing depend on your Z-Stop setup). You can use customizer or edit the OpenSCAD file directly to change…

Downloads
11
Likes
2
Rating
0
P
PrintablesFBA

Fixing Block for Hotbed Holder Sovol SV05 or similar

My fixing block for hotbed just broke and I modeled this one. It fitted just right like the original. 4 walls, 20% infill (Cubic or as desired). With this settings the fixing block get 14g, the original model is also 14g. I printed in…

Downloads
10
Likes
1
Rating
0
P
PrintablesEugene Ta.

HYPERFORMA Floatwheel ADV-ADVPro Car Rack cut for 256x256 hotbed

I'm printing it with zero bottom layers and 15% gyroid infill for first 1-2mm to make less slippery surface, placing modifier with 100% infill above to make it stronger.

Downloads
9
Likes
2
Rating
0
P
Printablesort

Hotbed for Microcube

Add an heated bed to your microcube, to improve bed tickness for PLA, and allow it to print PETG, and more (maybe ABS if your heater patch is powerfull enough to reach 110°C). * Beware: An heating bed require a lot a power. You MUST…

Downloads
9
Likes
1
Rating
0
P
Printableskulfürst

Anycubic i3 Mega XT-1 Hotbed Cable Holder

A modified version of the Hotbed Cable Holder to fit the XT-1 carrier plate by 3D Rapid . Category: 3D Printer Accessories

Downloads
8
Likes
0
Rating
0
P
Printablesbeerman

Tevo Branded HotBed MosFET Case

A remix of Blanik's mosfet case with the Tevo branding. http://www.thingiverse.com/thing:2258495 Update: I've added a lid with a 60mm x 10mm fan but haven't tested as I intend to use without a fan. The other design is minimalistic and…

Downloads
8
Likes
1
Rating
0
P
PrintablesJ.D. user

Qidi QPro hotbed upgrade kit accessories

Here is a couple models for Q1Pro hotbed upgrade kit made by Funcssor. The first is mount designed to replace factory noisy PSU to Meanwell LRS-150 PSU and SSR. LSR-150 is obviously silent because of passive cooling. SSR used to control…

Downloads
4
Likes
3
Rating
0
P
Printablesrp86

Kobra S1 Funssor Bed + Frame Hotbed Clip (Parametric)

I printed in ASA, 25% infill, 4 walls. Check the heat tolerance of your filament before using this model with a print requiring higher bed temps. .f3d included for easy dimension adjustment.

Downloads
4
Likes
0
Rating
0
P
Printablesdarthrax

Hotbed Filament Dryer

A small tower with 4010/4020 fan to dry a filament spool on your 3d printer bed. When printing the tower, create a cylinder modifier 100x100x1 mm centered on the part. Give it 0 top and bottom layers with a grid infill (~40% to 45% should…

Downloads
3
Likes
1
Rating
0
P
Printablespapinist

Anet A8 hotbed thermal insulation

When printing ABS you need to use high bed temperature, but it needs very long time to reach 90-100 °C. One simple mod is to insulate termically the bottom part, to avoid heat to disperse. Time to heat will not be cutted in half but will…

Downloads
3
Likes
0
Rating
0
P
Printables

Anycubic i3 Mega Hotbed Cable Cover

After I've printed these excellent levelling knobs ( https://www.thingiverse.com/thing:3145976 ), I needed a way to move the hotbed cable away. As I wanted to have a better solution then use zip ties, I've decided to play a bit with…