83 models
I previously used a large spoon to aid drying out my Camelbak bladder, but it wasn't that good of a solution. This design isn't anything fancy, but it does a great job of holding the walls of the badder apart to dry it out. I printed it…
Print approx. €5.24–€6.40 excl. taxPreliminary estimate for one variant
This is a collection of magnetic attachments for a hydration pack tube, to easily secure it on your backpack. I have a Osprey hydration reservoir that comes with a hose magnet kit , however, the part you put on the backpack is designed to…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Printer settings: 0.4mm nozzle 0.3mm layer height 15% gyroid infill PLA+
Print approx. €4.74–€5.79 excl. taxPreliminary estimate for one variant
A holder for the tube of a Hydration Pack (Such as a Camelbak) with tube diameters of ~10mm (0.39 in). Made originally to hold securely to multiple layers of fabric such as two t-shirts.
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
A small discrete clip to tuck your hydration tube into. Printed with PETG, 0.15 layer height.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
I needed a simple way to hang my water bladders out to dry. So far this fits two different CamelBak and one Osprey. Printed in Hatchbox Yellow PLA at .2mm and 50% infill
Introducing The Bladder Buddy, the innovative 3D printed solution for drying your Camelbak or other hydration bladders quickly and hygienically. This unique hanger features an internal expanding mechanism that securely holds the bladder…
A simple MOLLE attachment to clip an hydration bladder tube onto your backpack shoulder strap. Parametric design included so you can tweak it to your requirements if needed. The default supported tube diameter is ~10mm.
This model is used to hold various flavors of Liquid IV packets. It holds up to 6 different flavors and each section holds about 8 packets of Liquid IV. I printed this in PLA with no supports or brims and had no issues with printing this…
Handy little magnetic clip to keep your hydration hose close at hand at all times! I've provided files for a couple different strap widths here, but the design is parametric, the OnShape project is included below. I used a 10mmx3mm…
Meine Dosen sind sonst immer aufeinander gestapelt gewesen, und dabei oft umgefallen. Das original Modell bietet nur die Möglichkeit mehrere Dosen nebeneinander zu lagern, was in meiner Küche aber wegen dem begrenzen Platz eher schlecht…
This is a magnetic clip designed for 10mm silicon hydration pack tubes. It can be clipped on a nylon belt, and it will fit most of the backpacks and hip bags. I've used 2 13mm x 2.75mm neodymium magnetic discs (I already had them, so I…
A simple collapsible rack to help hydration bladders dry. The legs nest on the stand for storage. 10/5/25 Update: I added files for a completely unnecessary USB 5v 50mm blower I bought on amazon. This reduces dry time to about 30min…
I needed a second base for my older Source hydration magnet clip, so I could easily switch between backpacks. Apparently sometime in the last 10 years these were redesigned and the new ones have a circular “mating” action in addition to…
Tired of the Hassle? Simplify Your Hydration Bladder with 3D-Printed Parts Are you frustrated with the inconvenience of using your hydration bladder? Discover these innovative 3D-printed parts designed to enhance your experience and make…
PLEASE NOTE: This is an old design - check out the new version here ! Hydration bladders for hiking and biking are a very handy thing; the trouble is just getting them to dry after use, ideally fast. For that, I created this dryer that…
Man kann mit dem Trockner auch Flaschen mit großen Öffnungen trocknen.
Cut down version of the original to fit a container in our pantry. Included is a version with 'windows' for better visibility.
This model is parametric and features variables for hose diameter, clip thickness, and webbing dimensions. The STL is set up for a 15mm wide clip to connect 16mm webbing and 10mm hose (standard size for a Platypus hydration pack).
I like to go on short hikes and have my LTT water bottle with me, attached to my backpack. Whenever I needed to drink, I had to take my backpack off to reach the bottle, which is needlessly difficult with a heavy backpack. This is why I…
I had a standard 3 gallon water dispenser jug and electric water dispenser and picked up this Dometic GO water jug from REI earlier this year. The spigot cap failed (apparently they all do) and I still had the electric pump leftover from…
This mout allows to elevate a Dometic Go Hydration Faucet so its easier to use in the Scout Olympic truck camper kitchen.
Replacement clasp and base designed for Osprey hydration packs. Pieces can be printed together as a set or individually to replace a missing piece. These parts might work with other hydration pack systems I just don't have any to compare…
This is a pretty specific design for my needs, but this allows a Clean Hydration ceramic lined insulated mug to fit nicely in a Tesla Model 3 cup holder, with a cup holder insert in it. The included FreeCAD file would be VERY easy to…
Remixed this to make it a little wider. The hydration water tube I have is insulated, so it's a little wider.
Summary This clip / holder / closure for hydration bladders is simple, sturdy, and fully watertight. It’s a nice project that shows how well printed parts can match the function of commercial closures. Ideal for upgrade or replacement of…
I used this fan: https://www.amazon.com/gp/product/B07RP14KML/
My old Camelbak MULE doesnt have a clip for the hose and it always left dangling and left me fishing for it while riding. With the magnetic clip its always where i left it and its easy to hook it back without much hassle. Great model from…
This is for ease of access & stowage of a water bladder hose. This clip is designed to attach to webbing of either 11 mm width or 25 mm (1 inch). In my case, I fit it to the webbing present on my Osprey backpack's shoulder straps, which…
Keep Your Pet Hydrated in Style with These 3D Printed Water Bottle Holders! These innovative clips, designed for 3D printing, provide a secure and convenient way to hang your pet's water bottle in their cage. Say goodbye to messy spills…
Bee Hydration Station 🐝 Bee Waterer with a honeycomb pattern, designed to screw onto an 82 mm threaded jar. The honeycomb pattern gives the model a bee themed look while providing a practical drinking surface for bees. Simply fill a…
This is a modular design to support drying and storage of the Decathlon hydration bladders. Both the 1L and 2L. The top frame can mount either bottom frames to suit the 1L or 2L. The hook is common between both. I printed in Esun PLA+ on…
This connector screws on Katadyn BeFree water filter. Then, simply connect it in place of Source Storm or compatible mouthpiece of your hydration system, and you can filter lake or river water directly into your water bladder without even…
Needed a drying rack for running bladder, bottles, hose, and all the little parts. This is version two, down the road i'd like to make it so more parts come apart for storage while not in use, but for now, this works. Have tested a…
Rack created to hold 2 soft bladders for drying. Added a second file for addtional towers for drying of soft flasks. I epoxied these to the base of the original model.
Hydration tank drying clip wich incorporates attachment points for other parts, bite valve, valve, hose.All drying at one place. Print Settings Rafts: No Supports: No Resolution: 0,2mm Infill: 15% Notes: Printed out of ABS and is quite…
The best way to keep your filament dry without anything new! Open up those little desiccant packets and dump them into here to keep the surrounding area nice and dry.
Printed on an AnkerMate. Love staying hydrated and love these products! So I decided to design an organizer that allows me to keep the packets displayed for quick and easy access. Make sure to enforce proper support for the letters.…
I printed at .10 mm layer height.
I made own hydration reservoir dryer. It fits 2L, 3L reservoirs and many other reservoirs with 12cm+ opening. No more mold + cool look in your kitchen! :] Recommended print settings: flexible filaments like Nylon or ABS at least 2.5mm…
Replacement clip for Source Hydration Clip to use with original magnet from broken clip.
A holder for the tube of a hydration pack with tube diameter of ~6mm.
The Apidura Frame Pack Hydration Bladder currently comes with no attachment system. Existing clips by other brands are too small and provide no solution to attach to a bike. This clip is part of a custom mount system using a magnetic snap…
Add a 5v blower, a power source, and a few screws to this gadget, and you'll have a way to quickly dry out the bladder from a hydration pack (like a CamelBak) for storage. If you've ever left water in one, even a little bit, for more than…
I used this fan from Amazon: B07V2KVQB7 https://www.amazon.com/WINSINN-50x15mm-Turbine-Brushless-Extruder/dp/B07V2KVQB7
This is just a water bottle cap I found on Thingiverse.com (https://www.thingiverse.com/thing:4143548) that I added two holes to so I could fit a 5/16 (ID) vinyl tube.
A holder to keep your water bladder secure inside your backpack, in case that your backpack doesn't have one built in. Printed with tpu.
Printed with manual tree (slim) supports for the top of the magnet space only. Possibly printable with no supports but I haven't tried yet. If you need a different size magnet fitting let me know! I've ridden 40 miles with this so far and…
I needed a tall stand to hold my Camelbak bladder between uses. This simple print does not require supports or glue. Simply place all three objects on the build plate and print. I used 5% infill and 3 walls.
Create a better Hydration bladder holder for my bag pack. Screws are 2x M4 12mm with Nuts in Place on the other side. Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0,16 Infill: 30 Filament: Material 4…
This mount is the perfect way to hang your hydration bladder to dry. I was tired of hanging mine on open cupboard doors so I realized I could use my Skadis pegboards. The base plate uses my universal peg format and a modified peg with a…
Elevate your petite pals' drinking experience with the 'Petite Hydration Tower for Tiny Tails' – a 3D printable water dispenser ingeniously crafted for the delicate needs of small white mice. This hydration haven is not just a necessity…
I needed a stronger magnetic clip for my ‘Evoc Hip Pack Pro 3’ hydration hip pack and while I was designing this, I decided to make it a clip on baseplate. Now I can easily add one to any packpack strap with a width of 24mm. It slides…
Customized version of https://www.thingiverse.com/thing:2912390 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2912390 Instructions Using the following options: $fs = 0.1 thickness = 2 strap_width = 65…
Simple model to place a Source hydration system (also other brands based on it such as Deuter) on the side of an Ikea shelf. I was using standard hooks before but the bladder or tube fell off regularly. I have placed three of those on the…
Printing layer height: 0.2 mm supports: none material: PLA or PETG Assembly Print both parts. Use about 10 cm of 5 mm cord (or elastic cord). Put both printed parts on the cord. Lightly melt both ends of the cord with a flame and crimp…
This is a hydration tracker for the LTT Water Bottle in the form of a two bit binary counter, implemented as two bistable compliant switch mechanisms. This hydration tracker is meant to be glued in the small cup on top of the Spout Lid…
This is an improved version of my old drying rack design for hydration bladders (Trinkblase). This new version now has foldable arms that make inserting the drying rack into your hydration bladder and getting it back out much easier! With…
See details in Radek's original design. It's basically an air duct to direct air from a 120mm CPU fan into the hydration bladder to speed up drying. Can also work without the fan, to keep the bladder open and facilitate draining / drying.…
Easily disassembles and takes up very little space and weight. 75mm diameter, fits my hydration bag that is around 140mm across when flat. If you scale it, remember to scale all 3 parts the same otherwise the spindle won't fit.
Designed for 2X 12x3mm magnets. Magnets designed to be added after printing and to be held in place by mounting the clip on a strap and the hose side on a hose. Designed for an 11.5mm hose Will fit a strap up to 20mm wide I printed in ASA…
Remix - Electric Water Faucet/Pump Stand - Equivalent to Dometic GO Hydration Water Faucet. Found this on Printables and remixed for the cheaper faucets found on Amazon for $5-$10 dollars. Its a tight fit so scale down a bit if you would…
A tray with a spout used to dehydrate silica beads in a food dehydrator. Three trays can fit in the dehydrator at once. ASA or other high temperature filament must be used to avoid warping in the food dehydrator. Recommended settings: 3…
We like to keep our hydration pack bladders dry and open after every bike ride. Drain the bladder, hang it on the wall, and keep it clean for your very next adventure. Printing is easy. You need one of of each part . Everything can be…
A series of magnetic clips for hydration pack tubes in various sizes. Feel free to ask for other sizes if required, but hopefully the provided sizes should fit most backpacks and hydration packs. 2 6x3mm magnets will be required, one for…
I have a few of the Thermos 18 ounce hydration bottles and the one big gripe I have with it is that the silicone grip keeps sliding up. On the newer ones I think they tried to glue it in place. These models are for printing a retaining…
Stay stylish and hydrated with the Amber Hydration Bottle with Hexagon Coaster! This amber-toned bottle combines sleek design with practical functionality, providing a unique drinking experience. Paired with a geometric hexagonal coaster,…
Stay stylish and hydrated with the Amber Hydration Bottle with Hexagon Coaster! This geometric hexagonal coaster amber-toned bottle combines sleek design with practical functionality, providing a unique drinking experience. Paired with a…
I bought some cheaper style hydration packs, where the hook broke off after a few uses. With this I can mount them in my backpacks again, using M3 heat inserts and M3x8mm screws.
Remix of WhatsUp3d / @jpp123's original CamelBak Hydration Bladder Drying Rack. This is a refined remix created in Tinkercad. I narrowed the main structure to perfectly fit my Lunchbox Hydration Pack (Cloud Mesh) with a 2.0 L bladder that…
This drying rack was designed for a 2L Osprey hydration bladder. You'll notice there is a slot down the middle of the upper section of the rack. That is to accomodate the septum in the bladder that divides the inside to mitigate water…
Parametric hydration pack Bladder Hanger Change the size of the hook to accommodate your hanging needs. Make sure to add a few mm extra so the fitment isn't so tight (unless you prefer it that way then go right ahead) Default hook size is…
Magnetic hydration bladder hose clip for to 3/4" webbing . Uses magnets and a t-slot to securely retain the hose. Requires 7 mm x 2 mm disc magnet
Česká verze Hydration Tower je jednoduchý 3D tištěný pomocník, který promění hlídání pitného režimu ve hru. Po každé vypité sklenici vložte do věže kostku podle objemu: 125, 250 nebo 500 ml. Přehledná stupnice ukáže, kolik jste během dne…
A pegboard holder for running soft flasks. I couldn't find accessories online that fit my AR Shelving PRO metal pegboard and actually held my sports gear, so I designed my own set. Two prongs grab the flask under the cap collar, so it…
Ant nest with a 190 mm hydration base SUMMARY 18 single-entrance chambers, winding corridors, four Ø10 ports and a removable acrylic cover secured with M3 screws. DESCRIPTION A horizontal ant nest designed from scratch. It combines an…
Dies ist ein Haltersystem, um Boveda- Päckchen zu rehydrieren. Es wurde auf eine entsprechende Lock&Lock- Dose ausgelegt und besteht aus den Mittelteilen mit Boden und einer Endplatte. Das System ist steckbar und kann auf eine beliebige…
Stay stylish and hydrated with the Amber Hydration Bottle with Hexagon Coaster! This amber-toned bottle combines sleek design with practical functionality, providing a unique drinking experience. Paired with a geometric hexagonal coaster,…
We like to keep our hydration pack bladders dry and open after every bike ride. Drain the bladder, hang it on the wall, and keep it clean for your very next adventure. Printing is easy. You need one of of each part . Everything can be…
Parametric hydration pack Bladder Hanger Change the size of the hook to accommodate your hanging needs. Make sure to add a few mm extra so the fitment isn't so tight (unless you prefer it that way then go right ahead) Default hook size is…
A holder for the tube of a hydration pack with tube diameter of ~6mm.
Compact Ant Nest with Mesh Hydration Compact ant nest with mesh hydration. Cotton wool or a small sponge can be placed in the lower tray and moistened with water. The moisture is released into the nest through the mesh. A 70 × 50 × 2 mm…
