The Simplest Instax Polaroid stand
Print upright (like the .STL) Add a brim! Enjoy printing :)
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
- Downloads
- 5,510
- Likes
- 2,079
- Rating
- 5
14,167 models
Print upright (like the .STL) Add a brim! Enjoy printing :)
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Sad fact: Benchy doesn't float , but I have 10 of them and my daughter wanted to play with one in a bath. So I quickly designed one very simple floating boat. It floats great and it can carry smaller toys too, including a Benchy :-) In…
Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
Dimensions of the hole that the coins are meant to be inserted through are 3,5 x 0,35 Cm. (Made for the USD, euro, pound, and Czech crowns). Print at 0,2 mm layer height. 15 % infill will work just fine. V2 With V1 it is possible to open…
Print approx. €2.75–€3.37 excl. taxPreliminary estimate for one variant
Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15% Printer Brand: Prusa Printer: MK4 Filament: Prusament PETG Signal White, Jet Black
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for PETGSource material: PET
Adapter for Bic pencil with old style of pen to write Recommendations: Print with layer height 0.10mm Activate raft to avoid Glue both pieces together with craft glue Gcode is for MK3 printer, generic PLA and layer 0.10mm, brim 3mm…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
3D-printed wall-mounted holder with a two-part design. The holder consists of a U-shaped base that is attached to the wall and a insertable component with two holes for screws or bolts. The insert pieces are made to slide into the base…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Motivation A while ago I published a pretty cool bottle opener gun which did win the Bottle Opener Contest. It Features accessory rails to mount lasers, flashlights or sights. However I was not able to find commercially available…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
The warm weather is slowly arriving, Mini Yetis have started retreating to the depths of the freezers and refrigerators, but even so, if we are lucky, we can meet free-roaming specimens. Material: Prusament - Vanilla White Layerheight :…
This is a simpel modern looking bracket for angled (15°) furniture legs. This model in particular fits 30mm round wood rods. Tho, keep in mind due to filament shrinkage while printing and manufacturing tolerance of your chosen leg…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Fairly simple Gunpla Tool Holder I made to keep on my desk behind my keyboard. Edges are rounded a bit to keep from chewing your fingers up when reaching for things. 2x Slots for Tamiya Panel Liners (40ml) or Small parts trays. 1x Large…
Print approx. €12.25–€14.97 excl. taxPreliminary estimate for one variant
I used the next settings : -15% filling -0.15mm quality layer height - support on tray only
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
I designed the 3mf file of the larger version in such a way that an LED tealight can fit in the bottom. Print Settings Material: Prusament - Pearl Mouse / Prusament - Royal Blue / Azure - Silk Sand Nozzle: 0.4mm Support: No, If you want…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Get your hex screw bits in order with this easy-to-print design. With options ranging from 5x2 (10 bits) to 10x10 (100 bits), you can choose the perfect size for your needs. Designed with rounded edges and corners for safety and a…
Print approx. €1.97–€2.40 excl. taxPreliminary estimate for PETGSource material: PET
Print the two parts and voilà! If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is getting old, and every bit of support helps.
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
It is a very simple to print but also useful stand for your phone or tablet. Phone compartments are 9mm wide. If your phone is thicker, you can enlarge it and print it accordingly.
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
Designed this simple cover for Meanwell LRS-75-12 model but should work for 24V model as well. Fast and easy print. Protects the terminals from the top, but shouldn't interfere with the wires themselves. You can print it at 0.3 (Draft)…
Print approx. €1.08–€1.33 excl. taxPreliminary estimate for one variant
ЧЕХОЛ ДЛЯ МОБИЛЬНОГО ТЕЛЕФОНА "HONOR X8B" Добавлен файл в формате 3mf. Для самостоятельных изменений для себя. При печати разрежьте на 2 части, как показано на картинке
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
Simple Apple HomePod Mini Wall Mount – No Supports, Speaker-Friendly A refreshingly simple HomePod Mini wall mount that does everything the others don't. After trying the existing options — all either too complex, needing supports,…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
the screw works fine, its a bit smaller so the worse 3D printers still have a chance to print it well. holds strong , didnt fall at all, looks clean , has a little stop to hold the headphones better so they dont fall off. I prepared the…
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant
Simple spool holder for Prusa Mini+ (and similar). They sent me a wound plastic that protruded beyond the coil and I could not use the standard coil stand. Those models of holders that I found seemed to me too complicated (and requiring…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
An old design of one of our first models - hadn't been posted yet, so we hope you like it! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print)…
Print approx. €1.65–€2.01 excl. taxPreliminary estimate for one variant
Turn the screw to tighten Great for thicker desks
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
A Christmas themed plant pot for a cozy Christmas time! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
This was built around Craftsman tools but should work fine for other analogous brands by adjusting the parametric file. Print Settings .6mm nozzle at .32mm layer height. 3 perimeters for both vertical, top, and bottom. (Go higher for more…
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for PETGSource material: PET
school project
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
Simple mobile phone holder to put on your keychain, recommended for gifts and for your own use. Printing with any size nozzle, I recommend using large nozzles for quick printing. Happy printing.…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Cool flexi cat, bigger for googly eyes instead of the printed ones. This is a remix from Zentangle99 at Thingiverse.
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
I have made some clips to lock the skid of rc helicopters for transport. 5mm, typical 450 size. 8mm, logo 600. 9mm, Align 700N.
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
This simple bookmark is designed in Fusion360. 2 versions available, one with text and another without. Bookmark is 1mm thick but it can be adapted to 0,6mm to fit better to the book. Therefore adjusting Z scale in slicer can help. I…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2.5 meters of filament, so it can be a great addition to your…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
simple quick'n'dirty and thin funnel against those crumbs. use vase mode. diameter of funnel end is 14,6mm. super simple design, no rocket science, uploaded this only for the lazy. it's not very sturdy, but can be reprinted easily.
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
A very simple RS-25 Rocket Engine I made like 2 years ago. I don't care if you use it, just credit.
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
MK2 A simple 'pull-out' compact poo bag holder that can be used whilst wearing gloves. For poobag reels upto 32mm diameter and 65mm long. MK2 changes. The bag holder has a coarse screw thread removeable end. The screw-thread end is…
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
This small container is designed to hold 7 pills for one week labeled with the weekdays in english or german language. You can see through the letters to see, what is used and what has to come. I printed it with: 2 bottomlayer 3 toplayers…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
By accident created a nice little crankshaft mechanism. With very little cleanup, mostly the brim, and a careful rotation of the parts, it works. It is one print, no support material or anything else.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Use the threaded holes and studs to measure thread sizes on screws and nuts. Has the following thread sizes available: English coarse thread sizes: 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13 English fine thread sizes: 14-28, 5/16-24,…
Print approx. €3.97–€4.85 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Simple Nested Cubes, a stunning geometric sculpture crafted in a "print in place" design. With dimensions of 75x75x75 mm, this model is…
Print approx. €4.61–€5.63 excl. taxPreliminary estimate for one variant
A simple paint tray for all your art needs. Can also hold game dice as well. Works great in PLA, PETG, and other exotic polymers. Print flat with no supports, recommend brims if you are using a Bambu printer, Included is the .blend file,…
Print approx. €8.70–€10.64 excl. taxPreliminary estimate for one variant
It's the STL Version of Model: 792989 It originaly was a 3mf and can't be sliced and printed on every printer. Now: Converted via Orca slicer to STL sliced for Anycubic Kobra 2 Plus in Highspeed with PLA ----- Es handelt sich schlichtweg…
Print approx. €15.05–€18.39 excl. taxPreliminary estimate for one variant
I needed a simple drainage pipe cover, but I couldn't find any at my local hardware store. So I swiftly designed one without any supports. The cover is for a drainage pipe with dimensions DN 65 - ⌀ 65 mm. I incorporated an inner circle to…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
This simply holds your controller and takes up very little space. It is very different from most stands. It will hold your controller via the type c connector. I have made a stronger version which I strongly recommend you use. I haven't…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
A basic quick to print stand for F0
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
No supports required!
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
one colour - Wait untill it cool down completely first.
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Filament clip works on 2 kg Colorfabb and 3DJake spools and probably more.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Who hasn't built something out of each other and the screws are scattered all over the desk? This model should help.
Print approx. €6.03–€7.37 excl. taxPreliminary estimate for one variant
simple mobile stand designed in fusion
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
This was a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. Then an epic battle was fought in the room it was in and the table became collateral damage. It measures 1 inch by 2 inches and is to scale for…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
This is a simple dice tower with 2 horizontal bounces and one vertical roll into a dice tray
Print approx. €9.37–€11.46 excl. taxPreliminary estimate for one variant
Keeps a need stack of to coasters repurposed harddrive platers. Instead of throwing your end-of-live disks to the public garbage. And perhaps spending time making sure your data is not thrown away with them. FYI It's pretty easy to open…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
Das ist ein einfacher Löffel. Wir benutzen ihn, um Vogelfutter in ein Vogelhäuschen zu geben. Im Gegensatz zu unserer alten Version ist der Stiel ca. 100 mm lang, die Stielbefestigung verstärkt und der Durchmesser etwas größer. Der Boden…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
I needed a few hooks for an additional rod in the wardrobe, this one is for 20mm / 25mm rods. Simply enlarge or reduce without any problems. The hooks are now of the size that they cannot be moved so easily, scaled to 102% in the Prusa…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Hiermit drucken Sie einen einfachen Brillenständer aus. Sinn und Zweck ergeben sich aus den Fotos. Ggf. muss der Abstand an Ihre Brille individuell angepasst werden. Falls sie also nicht auf den ersten Druck passt mit dem Slicer…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Hi. This is my own designed vase. I've printed with transparent “blue jeans” PET-G. There is 2 GCODE files. One for simple vase mode, second with doubled walls. Happy printing!
Print approx. €3.93–€4.80 excl. taxPreliminary estimate for PETGSource material: PET
ideally printed in white, so it fits nicely to the design and colors of the module itself
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
Very simple demonstration of the revolve function in Fusion 360, used to make a vase. The Fusion 360 .f3d file is included below. The large vase takes a full day to print. The 50% scaled one takes only 4 hours or so.
Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant
I needed a way to organize my spices on the inside of the cabinet doors. This was my solution. Fitted to the Simple Truth square spices. Held up by 3M tape. My Build Settings Material: PLA Layer Height: 0.2mm Infill: 15% Grid Supports:…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Make first the flower , and than the top , fix them with a green filament Now a new top If you like it led me know and I make more flowers
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Simple Podium made to fit 3 Hoptimist | Prints on Prusa Mini | 20% infil | Ironing for all top surfaces recommended
Print approx. €3.85–€4.70 excl. taxPreliminary estimate for one variant
You can stretch it in the slicer. The picture of the split ones are 100mm wide. I recomend using a consentric top infill patern, as i did with the split wrist rest. I printed at 5% infill to speed up the print.
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Simple screw or beads sorter
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for PETGSource material: PET
Just another simple vase, which is not so hard to do, because I am still beginner, but if you don't know how to do, well you can download it. If you were interested in commercially using my models you can check out my Patreon.…
Print approx. €4.63–€5.66 excl. taxPreliminary estimate for one variant
I had a few Coins lying around, that I wanted to display, so I made my own custom little displays. I add the versions with the Scout lilly and the € Symbol I used for mine, but I also add the 3D Files for the Coin stands without andything…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Transform your windows into a scene from a horror movie with these eerie reaching hands! Watch as trick-or-treaters do a double-take when they spot these haunting silhouettes pressed against your glass, creating the unsettling illusion of…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
This tool holder fits 20 tools that have a maximum outer diameter of 5 mm . I designed it for holding a file set (diameters of ca. 4.5 mm). Nothing fancy or ultralight, but it comes with additional supports on the 4 outer edges so it does…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
I have a FFXIV map printed on foam board. The original holder is bad, it sticks out too much and over time the bottom has started to warp. So I designed a holder for the four corners instead. Mine is 5mm thick I don't know what thickness…
Print approx. €0.63–€0.78 excl. taxPreliminary estimate for one variant
To learn how to read and write. Decorative letter J to classroom. Adjust the size as needed. Print with contrasting colors. These letters are designed as an aid for frottage creation. You can also use this letter as a matrix when printing…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Description A simple, easy to print picture frame for 15x10cm pictures. The frame hangs from a single nail/tack on the wall. Pictures can just slide into the slot on the top and then the frame is ready to hang. Print Settings I used the…
Print approx. €4.61–€5.64 excl. taxPreliminary estimate for PETGSource material: PET
Easy-to-print Baseus Simple Wireless Charger mount meant for epic Honeycomb storage wall . I designed this accessory for Baseus Simple Wireless Charger (Updated Version) (exact model: BSWC-P10C ), but it should work for any round wireless…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Printer Prusa MK3.5 0.4 nozzle_Prusa Slicer 0.2 mm structural Prusament PLA seam position:Random First Layer 230°C, other layers 220°C, bed 60°C Ring_v1: Fuzzy skin (experimental) outside walls, Fuzzy skin thickness:0.2mm Fuzzy skin point…
Učební pomůcky obecně - aslespoň ve fyzice - nejsou zrovna levné, ale ceny za model hydraulického lisu považuji za výsměch. Schválně se podívejte sem: https://www.pierron.fr/presse-hydraulique-simple-hydropress.html, nebo sem:…
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for PETGSource material: PET
This simple Spool Holder is designed for all Printers with 40x5mmFrame, like MK3-4 Just under 20g Filament but strong! Designed to fits directly on the frame and the enclosure space can be kept very small. You just need 4x 608 Bearings…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
Just two simple floats to measure the rainwater levels in a barrel. Tie some paracord through the centre and use a pully to the outside of the barrel. Put the smaller float on the outside of the barrel. Print out of PLA or PETG, 5%…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
C'est un support pour chargeur de batteries 18 volt de modèle DC18RC. Ce support ce fixe au mur grâce à 6 point de fixation pour vis de diamètre 4.5. Il est recommandé d'utiliser une attache de collier afin de le maintenir sur le support,…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for PETGSource material: PET
A simple replacement for a wheelbarrow handle print with 30%+ infill may need to resize for your specific wheelbarrow glue or wrap tap on the outside of the wheelbarrow handle stock to securely fasten the handle
Print approx. €4.13–€5.05 excl. taxPreliminary estimate for one variant
holder for 2 interdental brushes. Tape it on the door.
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
This is a case for a QuinLED-An-Deca LED controller. I had been looking for such a case for quite some time but couldn’t find one. So, I created my own using Tinkercad. The case has a very simple design and provides enough space for the…
Print approx. €6.50–€7.94 excl. taxPreliminary estimate for PETGSource material: PET
i didn't like the original butt pad “wings” so i adapted/designed my own.
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
dice tower: print, then put dice in top and it should roll down and fall into the “pit” at the bottom.
Print approx. €4.95–€6.05 excl. taxPreliminary estimate for one variant
This is one of the simple bit holders I've made for the Dremel bits I have, its a simple block with holes for the felt and sanding discs and holes for the tool mandrils. For now I have this simple one available but I do plan to integrate…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
Filter ring This is the mold for the caulk that makes the sunlight filter Filter ring pressing tool You can clamp this on top of the filter after adding the caulk to get an even top surface Control box 2 piece print. This holds the…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
Primary mount is designed for "industrial" iPhone look (model 12+), but tried to mount 11 Pro Max and works as well. Ofcourse you can extend it on X and make bigger mount space. Thanks Mig
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
Je to možná až příliš jednoduché, ale nechtělo se mi tisknout díly, které už mám- jako je ten kousek překližky-jde nahradit prkénkem nebo čímkoli vhodným… Držák se tiskne na boku, bez podpor. Další nastavení podle materiálu a požadované…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
This model is to be printed with supports on the outside if you have a low end printer. Nicer printers should be able to handle this model perfectly.
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
Uses two wood screws
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple display stand for Dummy 13 and other 13 Series figures. The stand consists of a base and two arm segments. You can then choose an adapter for your model from the included files. For best results, use ABS or PETG filament.…
If you don't have a 3D-printer you can buy a set of 3 pcs printed here → Buy it here! The cable organizer is designed to fit all standard USB type cables with a diameter of 3-5mm. 2 slots for 2mm cable. 2 slots for 3mm cable. 2 slots for…
This was printed on the Bambu P1P and printed in 23 minutes(17 minutes of actual printing) with white PLA basic. It used just under 10 grams of filament. Check out the Makerworld profile…
Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design. Version 2+ , added March 15, 2024 incorporates slightly smaller filament clasps and reverses the two…
This remix of the Mushroom-themed Print-in-Place Twisty Puzzle Box turns it into a simple twist lid container. https://youtu.be/sBsHtqxGVIw https://www.youtube.com/watch?v=3nYm0oPaSr4 Printing All parts print without supports Consider…
Simple Honeycomb Mobile Stand Consists of two parts that you can optionally print in different colors. The stand offers two settings – depending on how you insert the parts together, you can adjust the angle of the stand. Charge your…
This is a really simple Keycap - compatible with Cherry MX and many clones which share the same dimensions.
The source marked this model as adult content.