106 models
This clip will help you keep in place custom covers you put over your inflatable pool. Using the clip will prevent the cover to be lifted up when there is some wind. I based the design of the clip on the design of the holder for the Intex…
Replacement Hydro Force Paddle Board Fin for inflatable paddle board.
This filter cleaner cleans the filters of inflatable hot tubs inside and out! Fits standard garden hose click-on systems (compatible with Gardena and similar brands). Dimensions: Diameter 4 cm Needs a 1/2" O-ring Print settings: Walls…
inflatable benchy it has all the features of the original (except for the text underneath) warning: don't try to inflate it, it won't work :) you can modify it as you like, but just respect the license. I printed mine (on the photo) in…
My kids lost the outer ring on their dinosaur Halloween costume during trick or treating. It happened due to the fabric stretching from around the fan and letting go. I found this print and then modified it to be a larger hold area to…
These fun and functional pool floaty coasters are for your enjoyment! Print with minimal infill and variable layer height for low weight and high resolution top/bottom surfaces. The base can be printed with typical settings like:…
Model of inflatable Heavy-Duty Boat
This is a bike pump to inflatable unicorn adapter. Might work on other inflatable objects to. The pump I have fits car tire valves as well. Category: 3D Printing
The C clamp is suitable for pools with an inflatable wall thickness of 20 cm If your bath is wider, print the C-clamp-half 4 times. It contains 3 screw holes to attach to the tray and a maximum wall thickness of 30 cm can be achieved.…
This is a remix of the Inflatable SUP/Kayak Halkey-Roberts Valve inflation adapter posted by lieutenantglorp here: https://www.thingiverse.com/thing:2354966 . It was too small for my hose which is why I remixed it. It should fit most…
Model of inflatable Heavy-Duty Boat powered by a rubberband.
When I am travelling with motorcycle I have no room for extra things. I was always upset from blowing this inflatable bed. Often after some beers.... I was dizzy :). Now I can take this and enjoy blowing ;) Extra material 1 x DC motor,…
This model is compatible with the lego system.
This model is compatible with the lego system.
I designed a replacement fin for a friend's paddle board. The root of the fin is thicker than the original so it should be stronger. We tested it over the weekend and it performs well. 0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01
Ready for comments) I am ready to study with you)
Mini Fan Blower Inflatable replacement ring.
The original model is great, i just simplified it a bit to make it more robust for my little daughter as a toy. I printed the boat on my Sovol SV06 Plus with the following settings: Material: PETG from Sunlu in Sakura Pink Nozzle-Temp:…
Air compressor adapter for inflatables balloon
This design took heavy inspiration from another model. Here is the link for it: https://www.printables.com/model/259454-
A model of an inflatable pool, for miniature or diorama scenes. I printed it in TPU95.
Secures an Inflatable/Blowup/Holiday Yard Decorations to the ground. Width: .5 inches Height: 4 inches Depth: 1.18 inches
Nice inflatable boat for playing in the bathtub or pool
Well, better than my previous rudder ( http://www.thingiverse.com/thing:806945 ). Rotating the worm gear both adjusts the rudder angle and also tilts the rudder fore and aft. For normal steering angles (+/-20 degrees) the tilting does not…
top part and tooth would be 100% infill in all situations, handle I printed in 25%. I recommend to print it from PETG, ABS and etc.
This is a quick and urgent design of a can holder for the Intex inflatable boats, which have an fishing rod holder. The “unique holder” was created for the Intex Seahwak 3 and tested on the a river and works great for can with a maximal…
Simple adapter to attach to air compressors to assist with the inflation of air mattresses. One end fits a standard clip-on tyre inflator outlet, and the other in conical to jam inside the large inlets on an air mattress. The friction fit…
Adapter so I can use my air compressor to fill our paddle boards. Compatible with a Leafield C7 Valve. Top accepts a Schrader Valve with 1/4" Male NPT such as:…
Feel free to ask questions, I have plenty of more Lego files on my profile. Please leave a like! :)
Description I have a ton of holiday inflatables that I setup outside of the house for various holidays. Inflatables need maintenance, and one common task I have is replacing the burned-out low-quality LED lights inside an inflatable, with…
I bought an inflatable floating dock from Happybuy that came with a hand pump for inflating it. I designed an adaptor for my Intex QUICKfill 160 pump to make quick work of the inflating process. link to floating dock incase anyone else…
Seat nut for my inflatable boat. Open and closed version to chose from. Print instructions 30% infill 0,20 mm PETG in my case.
Are you looking for the wackiest, most inflatable, tubular place to deposit your coins? Look no further. This coin bank has it all…a smiley face, silly streamer hairs, and a coin slot in the top! Full to the brim with coins?? Don't worry,…
I made this from PLA and it holds well. PETG or PC is probably going to be more durable.
Tired of buying an inflating head each time to replace the one lost somewhere or fallen overboard ... At least one ring must be printed in Flex material if possible.. Feel free to combine other rings in order to have a correct fit with…
I rearranged the model by Deses_182788 to be used with the einhell cordless blower. I added a hook to prevent it from getting lost. I printed it using PET-G. I hope it will be useful. Bonus: f3d file added.
This custom-designed adapter allows you to connect an Intex inflatable pool hose to a 0.5-inch irrigation tube. The part features a precise fit on one end for the standard Intex pool hose, with the opposite end tailored to securely…
When setting up the inflatable pool for our daughter, we ran into the issue that not every part was safe to inflate with a compressor. Unfortunately, I only had a bicycle air pump available, so… … I designed and printed an adapter! :-)…
Made a bowl out of the inflatable pool on Tinkercad
The standard valve for many air tents/inflatable kayaks and pack rafts etc is the “Boston” valve. One hole for inflation and deflation, but two different caps; with the small cap removed the inflatable can be blown up, as it includes a…
inflatable platform for minifig
Adapters to ease the filling of Intex inflatable pool with 1/2" compressor fittings as the Intex pool valves are very finicky. As a bonus I have included versions that fit the ProBuilder Compressed Air Gun for better control ( Probuilder…
Direct replacement caps for AirUps inflatable bunkers. Not a perfect replica of their threading, but tested during a whole day game they hold air just fine. Printed at .3mm height with no issue, but lower heights should work just fine.…
The Problem The Avenli Vermont inflatable hot tub ships with a filter cartridge (marked "Type 2") that doesn't quite fit standard sizing, it has a smaller bore and different ring placement. Replacements are harder to source, more…
Remix of @DSt's "Filter cleaner for inflatable hot tubs" that use Type VI filters. Created a different interface to adapt to generic quick connects such as ( https://www.tractorsupply.com/tsc/product/brass-quick-connect-set-4040476 ).…
This is a plug to hold the 20mm air valve of the floor of an Intex Explorer 2 kayak open while you fold it up for packing. I found that while I was packing the kayak away after use the valve would close and air would remain trapped in the…
just simple paddle drip rings that could be print with minimal supports. Orient models small hole up, and turn on automatic organic supports, it made 45 degrees angle so supports would be only in center to hold small ring on the top,…
This nozzle combines bostwickenator's Makita Blower nozzle base with my parametric 9mm nozzle that fits larger floaties like Intex etc. The standard nozzle that comes with Makita is 7mm and mostly works with small inflatable toys. My…
Do you have an inflatable hot tub and wished you had a dry armrest to set things like phones and drinks on? Look no further. This shelf sits right over the edge and is easy to remove when putting the top back on. It has drain holes that…
This is a simple replacement plug for the Bouncy Pals brand inflatable ride-on toy. I got one second-hand that was missing the plug. Luckily my daughter already had another one so I was able to model a replacement based on the OEM part.…
I didn't want to buy a new pump just for this mattress, so made this adaptor to use a pump I already had. Made for the Outdoor Revolution Skyfall Midi 150mm Self Inflating Camping Mat ORSM2013 It took a couple of revisions to get it to…
This is the part that adapts the air pump to the valve on the boat while compressing the pin to allow for air to flow in/out. Print this at 100% infill as it will need to be a solid part. I printed in ABS and has held up well, you could…
Buddy wanted to add some airflow to his dinosaur costume. Designed this to be installed onto the costume for air flow. Fit in place, punch screw holes and use M3 screws to hold in place, then cut out the center fabric for the vent
In China at Ali I bought 3 waterproof led lights. (see images) For this I made a holder that is clamped on the water filter outlet of the inflatable Mspa hot tub. On the side of the water outlet are recesses where the holder clamps.…
Small attachement for your vacuum to suck all the air out of your inflatables. Inner diameter: 34.6mm
I made lot of models with 3D printer during last 4 years. Some of them were exposed on my stall at Maker Faire Prague 2021. Now I would like to offer some of them for other 3D printing guys. There is one small and cheap piece. It is…
I've lost my original oarlocks for the FISHMAN II 400 PVC boat and decided to have a go at modelling something that looks similar to the original ones but can be sturdy enough when 3D printed. Some of you might have broken or lost them at…
I have holiday lawn inflatables that don't run 24/7. When they deflate, they cover their own fan and remain flaccid amongst their peers when there's pressure to perform. This little tool holds the fan upright and keeps the fabric away…
The plastic base for our inflatable Grinch with Max cracked in several pieces and no longer held air, nor properly acted as a stable base. I removed each piece, hot-glued them together and took measurements. This has to be printed on an…
Filter reduction for inflatable hot tub
Recently picked up a Sea to Summit inflatable pillow, however the filler valve is smaller than my Big Agnes inflation bag so an adapter is needed. Printed in PETG
Print with standard supports for the threads. You may want to print at a fine layer height to maintain detail on the detents on the threads. I printed at .12mm layer height and they look great and hold well. This is a remix of a model…
I purchased several Intex explorer 200 inflatable boats to use as pool cover pillows and had several left over paddles. I designed and printed this connector piece so that I could utilize the left over paddles as a full kayak paddle. The…
A schrader adapter for inflatable mattress
I printed it in TPU and it worked great.
Received CO2 cartridge w/indicator tab already broken. This is a remix from nw111 on Thingaverse. Altered for durability
100mm×52mm×9mm Solid almost indestructible part. Print with 15-20% infill. 0.2 or0.3 layer height. M8 holes fits the imperial size shown on kayak mount plate ¼-20 x 7/8 stainless steel bolts recommended. Reworked the part with more…
This is a 3D-printed universal air pump nozzle adapter designed for inflating air mattresses and other inflatable items. The adapter fits securely into standard pump hoses and is shaped to be compatible with most air mattress valve types…
I have a little 18month old who like to grab things off my desk, I designed this fan cover so if she grabbed it, then she wouldn't stick her finger inside the spinning fan blades. Mini Wacky Waving Inflatable Tube Guy: (ad#)…
Inflatable mattress valve key for air mattress
The fins consist of 3 main parts: two jaws and the blade. The blade is fixed between the jaws using M4 screws, and the whole unit slides into the SUP finbox. The jaws - left and right one - should be printed using an environment resistant…
Print as oriented, at a 45 degree angle, and turn on organic/tree supports . The layer lines must be oriented this way to give strength to the spring part. Use at least an 8mm brim , or it will fall over during printing. Design link:…
Lost the original fan grille/lock ring and needed a replacement for an inflatable riding axolotl costume. This is a quick print that only takes around 15 minutes for a single ring and uses under 5 grams of filament. It fits on a Red Wind…
17mm adaptator to be fit on a bike pump (7,5mm). Printed in PETG because of thin walls and constraints.
Inflatable Fan Adapter I recently had an inflatable fan/blower go out on our Halloween pumpkin patch decoration . The new fan was not quite a 1:1 replacement . I created a quick mounting plate which included a simple grated intake…
I modeled this air pump adapter for my inflatable tubes. Works well to inflate or deflate.
Just a simple adapter that allows you to inflate and deflate inflatable things like pools, toys, rafts and tubes. This includes 4 models, 1 hose adapter and 3 fittings for small, medium and large valves. Simply push the fitting into the…
This is a stand for an inflatable globe with a diameter of 85cm like it can be found here: https://www.amazon.de/Caly-76116-Aufblasbarer-Globus-XXL-Badespielzeug/dp/B01G978YFK/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&sr=8-3…
Cover grille for 6" inline duct fans. Protects the intake from sucking in debris. Often used to attach a fabric tube for a cold air inflatable. Screws to the inline duct fan with self tapping sheet metal screws. Provides an easy mount…
I printed the main body in PETG for better layer adhesion, and the base valve gasket in TPU 95A. The valve gasket didn't survive the inflation process, but if you screw the top lid on fast enough, most of the air stays in the kayak. I…
Large hole sized to tap a 10mm x 1.5 thread. Small hole on top for string tether. Sphere is about 1" in diameter.
I needed to fix two hoses from a pool pump to my inflatable pool (that was not designed to work with a pump, thus, does not have connection ports at the wall). This simple holder can be clipped onto the inflatable ring on top of the pool…
I made a 2D-style wacky waving inflatable tube guy. He’s got two legs (rare*) and two faces (important*) It's the best one ever* I’ve tested it down to 6 cm tall (about 2.5 inches) and it still works great 2 versions, A key chain and a…
I needed a nozzle for an air mattress pump, so I designed one. Should fit most standard air mattress pumps, inflatable pumps, etc. Also should fit the tips they all use.
A small Print to Help make pumping up a inflatable Windsurfer, if yours didn't come with a pump this will be most useful! Please let me know if this doesn't fit your exact one and if I have time/or am available I will model another…
Fun small model for decoration, that can be after printing warmed in hot water and inflated to a nice, full shape.
This is an attachment made for the airpump for my inflatable spa.. The idea is to use the airpump to dry out the interior of the inflatable.. The attachment fit into the air-hole on the spa and you can direct the flow of air so that it…
I just added a 8mm ID, 4mm thick, 2.5mm tall eyelet to Donutcat's Fancy AirUps Inflatables Cap so it can be tied down with paracord or whatever rope ya want step and stl included for your convenience Thanks donutcat!
Had a need to infale a large towable from my air compressor.
The object clamps onto the main body of the pump, holds the hose on two sides, and can use an M4 screw and captive nut to secure itself. My inflatable kayak (Seaeagle Razorlite) came with an inflation pump, a Bravo SUP4. I wanted an item…
These are adapter plates that can be used to convert a Gemmy plastic base with folding legs for fan models YEF-125 & YEF-200 to work with the smaller fan models SJD-B2-N, TH-BL3-N, YEF-60, YEF-80. If your base plate is 4 5/8” length…
This is a cover cap, placeholder for automatic triggering system of the Decathlon (not anymore) Automatic Inflatable Life Jacket. Just unscrew from the bottom of UML unit the trigger system and place this cap to prevent unintended…
Explosive toy is a lovely toy for children, which is very weak from the inside and breaks easily. This part is for Series 7. If anyone wants other models, message me.
This cup holder was modeled in SolidWorks (SLDPRT file included). Printed in PETG on a Bambu Lab P1S with a 0.2 mm layer height. PLA should work too, but PETG is recommended due to better mechanical strength — the walls are quite thin.…
The inflatable pool that I have, has a drainage hole at the bottom. However, due to the water pressing down on the bottom layer around the hole, it barely drains. This inflatable pool drain is designed to fit under and inside the hole to…
I have several yard inflatables where the LED has gotten dim over the years. I found a youtube tutorial for replacing the original LEDs with 3 LED modules. I designed 2 versions of these clips/mounts to hold the 3 LED modules in place.…
Was getting some trash in blowup paint booth so designed a air filter to fit on the 2 paint booth blowup pumps. Zip tie mount. Reduces airflow by about 5-10% but still Plenty of air. Designed around a standard 6 inch engine filter…
