Search results: inox

Sort order

Counting matching models…

P
PrintablesRetron Print

Kurvinox

I want to share my latest weekend creation. An epic “Kurvinox” character from well-known Polish cartoon “Kapitan bomba”. Designed from the ground up in 3Ds Max as a multipart print for assembly. Printing tips: Print one part at a time (or…

Downloads
2,360
Likes
142
Rating
5
P
PrintablesLorenzo

Victorinox Swiss Army Knife 91 mm scales

Replacement scales for Victorinox Swiss Army knife 91 mm. In the files section there are a few different variants, in particular with and without the slot for the toothpick and tweezers and with and without the Victorinox cross logo; as…

Downloads
1,806
Likes
234
Rating
5
P
PrintablesUliLac

Victorinox Swiss Army Knife Pocket Clip

Here's my take on the pocket clip for Swiss Army Knives. The clip threads on to the corkscrew and holds the knife securely in your pocket. There's two versions: V1 is for regular SAK - here the clip rests on the side scale and allows a…

Downloads
1,608
Likes
173
Rating
4.92
P
PrintablesAlby312

Star Trek ship Nova Class USS Equinox

Original model from https://www.deviantart.com/metlesitsfleetyards. This is a scale model of Nova Class from Star Trek Voyager, the scale is 1:2000 (original length: 180m) The model imported in prusaslicer is broken but i'm able to slice…

Downloads
1,187
Likes
116
Rating
0
P
PrintablesHolzerMax

Victorinox Toothpick Replacement 50mm - actually good quality model

As I could not find any really good models of the standard Victorinox Toothpick, I designed my own in a few iterations. This is now the fourth version. It fits all my (by now relatively large selection of) Victorinox Swiss Army Knives…

Downloads
1,150
Likes
210
Rating
4.9
P
PrintablesPunkelopment

Victorinox 84mm scales

I had sale this models on Etsy for some time but now it's free!

Downloads
1,147
Likes
109
Rating
4.6
P
PrintablesAles

Victorinox Dual-Knife Sharpener angle holder

This model allows you to use Victorinox Dual-Knife Sharpener as you would your Spiderco Sharpmaker. It maintain angle for your sharpening rod at exact 30 or 40 degrees both at narrow and wide sharpener side. Micro variant is even smaller…

Downloads
1,033
Likes
51
Rating
4.8
P
Printablesdtxtr

Fake Kydex: Folded Universal Sheath for Victorinox Fruit Knife

Well, I needed a sheath for a paring knife in the kitchen box of my camper. Printing a knife sheath is mostly problematic since overhangs and layer orientation tend to make the part weak, ugly or simply impossible to print. Then I had the…

Downloads
914
Likes
183
Rating
4.78
P
Printableslacop

Victorinox small toothpick

Mine snapped in half after many years of use. Here is a simple replacement. Printed in PLA, with 0.05mm layer height. Lifted off the build plate without a brim so I recommend turning that on. PS: I only use this to clean out my phone usb…

Downloads
869
Likes
292
Rating
4.56
P
PrintablesBRotten

Minox camera film cassette

This is a cassette for the Minox (and others that use the same cassette) cameras. Print instructions It requires a 0.25 or smaller nozzle at .10mm DETAIL setting and thin wall detection.

Downloads
793
Likes
35
Rating
0
P
PrintablesSimon

Helinox Chair Feet

I have designed these for easy to click on and off, moreover it makes it easier to clean after use. All feet is stored separately and can easily fit into the Helinox chair zero storage bag together with the chair. It is also possible to…

Downloads
746
Likes
93
Rating
5
P
Printablesthinbegin

Pa-8x11 : A Minox/8x11 development reel (Paterson-fit)

I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…

Downloads
551
Likes
21
Rating
0
P
PrintablesPeter H

BALL FEET FOR HELINOX CHAIRS

The feet on my Helinox chairs had perished, and rather than replace them with standard skinny versions and adding a ball foot adapter, I made these replacements to enjoy the best of both worlds. The Helinox ball foot adapter accessory is…

Downloads
525
Likes
90
Rating
4.88
P
PrintablesPistonPin

TweezPickVic - keyring container for 45mm Victorinox tweezers + toothpick

The Victorinox SwissTool Spirit X is - imho - perfect. Except for the missing tweezers and toothpick - a fix. PS: FreeCAD source file included. Category: Containers

Downloads
489
Likes
95
Rating
5
P
PrintablesManiek

kurvinox

kurvinox czy kurwinox - jeden uj.. drukujcie jak chcecie (150% wygląda zajebiście)

Downloads
471
Likes
36
Rating
5
P
PrintablesPunkelopment

Victorinox microscrewdriver blank

Victorinox microscrewdriver blank

Downloads
460
Likes
74
Rating
5
P
PrintablesLowres

Victorinox Knife Scales 58mm Swiss Army

Victorinox Rambler Knife Scales 58mm Beta testing: Also added scales that can hold two toothpicks per scale, because of the angles the tools do not fit flush. Category: Tools

Downloads
452
Likes
63
Rating
5
P
Printablesvisualplastik

Victorinox 91mm ruler scale

NEW Added three slot version to support a mini 3d printed toothpick. Can use the original tooth pick slot for a fire steel. For best results you'll need a 0.2mm nozzle. Included a couple other versions of the opposite side in the 3mf.

Downloads
448
Likes
71
Rating
4.25
P
PrintablesKellye Pilon

Fish Scales for 91mm Victorinox Deluxe Tinker

Should press fit with moderate pressure, tougher fits can tap gently with a mallet. Printed on Flashforge Finder with PLA.

Downloads
446
Likes
96
Rating
4.8
P
Printablesvisualplastik

Victorinox 91mm Precision Bit Holder + Driver Scale

MAGNETS - Uses five 6x2 magnets (measured size is 5.94x1.6) inserted in the bottom. Place adjacent magnets in same direction. While not required to keep the bits in, it stops them moving around. The groove under the bits is ultimately…

Downloads
431
Likes
81
Rating
5
P
Printablesvisualplastik

Victorinox 91mm Whistle Scales

I tried several 3d printed whistles and this one was the loudest, and so I've integrated it into a scale - much like the discontinued victorinox whistle scale. Also included opposite side plus scales with and without victorinox logo, per…

Downloads
428
Likes
64
Rating
5

Victorinox Kitchen/Snack Knife Sheath, Blade Protection

I have a lot of Victorinox knives in my drawer and they come without blade protection, I have developed a knife sheath for these knives. Now it's safer for everyone in the household and you can simply reach into your drawer and get the…

Downloads
420
Likes
76
Rating
4.8
P
PrintablesGlenn37216

MINELAB EQUINOX STAND

Simple Metal Detector stand that fits the Minelab Equinox series. (600 or 800) There are two versions of the stand. One with logo, one blank. I have this stand mounted so that it rests against the bottom of the control box arm. (See…

Downloads
410
Likes
27
Rating
4
P
PrintablesLeDomme

Victorinox 58 mm Scales

Easy to print, ideal with outside facing your print bed. Tested in PLA and ABS with 0.2mm layer height. Scales are press fit, if needed use parallel pliers to press them on your knife. Version with and without the Victorinox Cross, which…

Downloads
352
Likes
33
Rating
5
P
PrintablesOliver Syp

Victorinox SAK 6mm hex bit driver

I made this hex bit driver 6mm (1/4 inch) so I could use my Victorinox SAK as a repair screwdriver. No supports required but you might need a brim. Versions There are two versions one for 91mm like the compact, huntsman and the other one…

Downloads
351
Likes
69
Rating
4.5
P
PrintablesVirtuallyJason

Gloomhaven Monster: Inox Archer

After I made my Inox Shaman model, I figured that it would be comparably easy to make an archer to match (since I could re-pose the male Inox Shaman body and then add the Archer accoutrements). It turned out to be a bit more involved than…

Downloads
341
Likes
29
Rating
5
P
PrintablesTimon

91mm Victorinox swiss army knife scale with toothpick/tweezers

Customizable scales for a Victorinox knife with space for toothpick/tweezers

Downloads
334
Likes
44
Rating
5
P
PrintablesTom Haynes

Victorinox SwissCard pocket knife case replacement

I broke my SwissCard pocket knife case about every 6 months. The small glued joints near the knife seemed to fail first. This is a FDM printable replacement. I have used it for 2 years now without any failures. After printing you can…

Downloads
305
Likes
44
Rating
4.5
P
PrintablesFujima

Victorinox pocket clip V1 more ergonomic

Thickened some parts, removed overhang on the side as much as possible to make it more ergonomic. You still need small touchup to remove sharp edges digging into your palm. I recommend using stiff filament for this. I printed with 0.6…

Downloads
304
Likes
35
Rating
4.8
P
PrintablesJáchym Tiskne

Victorinox tomato knife cover

Print it laying on the site, the printer will bridge “across the blade.” If the blade doesn't go in, check the bridging direction and if needet adjust the angle of bridging in the infil tab (PrusaSlicer). If it still doesn't go in, lower…

Downloads
300
Likes
36
Rating
5
P
Printablesvanis

Helinox Chair Zero feet

PETG or ABS/ASA for weather protection some strength profile with more walls (6) print upsidedown without support better to use brim

Downloads
297
Likes
36
Rating
5
P
PrintablesVirtuallyJason

Gloomhaven Monster: Inox Shaman

I've made an Inox Shaman for Gloomhaven ( http://www.cephalofair.com/wp-content/uploads/2015/09/Inox-Shaman.jpg )! I initially modeled it in a pretty neutral pose, like in the official artwork... but without all of the cool details of the…

Downloads
294
Likes
27
Rating
5
P
PrintablesJustABiomedEng

Emergency toothpick card - Victorinox inspired

This is a simple credit card sized toothpick collection for emergency use. It fits 11 single toothpick and they are easy removable from the frame. They can be used also in all that difficult situation where you need something thin to…

Downloads
293
Likes
55
Rating
5
P
PrintablesVger1981

Victorinox Classic 58mm scales

Use a 3,2mm drill bit with a flat tip to clean the holes for a better fit. Scales should snap-on without a glue.

Downloads
278
Likes
49
Rating
2
P
PrintablesAlaize0013

Victorinox deluxe tinker beltholder

Victorinox Deluxe Tinker Beltholder This is a beltholder for your Victorinox Deluxe Tinker. You just need to clip the Deluxe Tinker in the holder to fix it. Your EDC is reachable with this holder. Have fun !

Downloads
277
Likes
63
Rating
4.4
P
PrintablesRJ Tan

Victorinox 58mm Scales

Victorinox 58mm scales with slot for pen, tweezer, toothpick and 2 pins/needle. One more slot is available for toothpick based tool.

Downloads
277
Likes
26
Rating
0
P
PrintablesMFM15

Victorinox/swiss army knife multitool stand

Stand for 91mm swiss army knife multitool.

Downloads
275
Likes
40
Rating
4.8
P
Printablesthinbegin

Jo-8x11 : A Minox/8x11 development reel (Jobo-fit)

I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…

Downloads
256
Likes
17
Rating
0
P
Printablesvisualplastik

Victorinox 91mm Corkscrew Pocket Clip

Simply screw onto corkscrew to attach.

Downloads
252
Likes
29
Rating
3.5
P
PrintablesVirtuallyJason

Gloomhaven Monster: Inox Guard

This model is 99.999% RobagoN's amazing work ( https://www.thingiverse.com/thing:2905243 ). All that I did was to replace the horns that he sculpted with a set of the Inox horns that I sculpted, so that the horns on all 3 of my Inox…

Downloads
248
Likes
26
Rating
5
P
PrintablesPiotr Zazakowny

Victorinox toothpick replacement

Small things tend to disappear occasionally. Same happened to a toothpick in my folded knife. This is quite tight replacement piece I fitted into my knife.

Downloads
247
Likes
52
Rating
4.75
P
Printablesdv

Victorinox pocket knife sides

Print with your favorite color/filament and customize your victorinox pocket knife! Very simple to install, just remove the old ones and push the new ones in, just a simple pressure fit works well. Victorinox pocket knife dimensions:…

Downloads
244
Likes
53
Rating
5
P
PrintablesLilyu

Minox 35 GT coin cell battery adapter (LR44)

This very simple adapter allows you to use four common LR44 coin cell batteries to power your Minox 35GT, no more need for the long discontinued original battery!

Downloads
231
Likes
13
Rating
0
P
Printablesbobmagoo

Sheath for Victorinox 6" Fibrox Semi-flex Boning Knife

Designed to fit a Victorinox boning knife, model number 5.6603.15 with the Fibrox black handle. If you want the TinkerCad link, let me know. Prints with the flat side down, no supports. 0.2mm layer height works fine, but I ended up going…

Downloads
227
Likes
17
Rating
5
P
PrintablesLeopoldo

Sharpening guide for Victorinox diamond sharpener

Sharpening guide for the Victorinox diamond knife sharpener. It helps you keeping constant angle (20°) when sharpening your EDC.

Downloads
227
Likes
25
Rating
0
P
Printablesmr.rioes

Victorinox Swiss Card EDC Box

A small box for your EDC gear with a Swiss card as lid. Size is similat to an Altoids tin but a bit taller for more space. Printer: Ankermake M5 Layer: 0.2 Infill: 25% Supports: yes, organic Feel free to edit.

Downloads
206
Likes
36
Rating
5
P
PrintablesAHoopyFrood

Victorinox 8-in Chef's Knife Cover

A blade cover I initially made as part of a gift. I've removed the monogram from the stls but have included the 3mf file so you can put your own in.

Downloads
204
Likes
27
Rating
5
P
PrintablesKdan721

Helinox Chair Cup Holder

Fits: Chair One, Chair Two, Chair One XL, Sunset Chair, Beach Chair, Savanna Chair, Playa Chair, Chair One Mini, Chair Zero, Chair Zero L, and Chair Zero High-Back. Supports: Yes (everywhere) Infill: 30% The way this is uploaded, it will…

Downloads
203
Likes
30
Rating
3.5
P
PrintablesMalcolm

Cap Guard for Victorinox Swiss Card Scissors - Ultralight

A simple but effective protect cap for the Victorinox Swiss Card scissors. These Scissors are meant to go into a SwissCard but you can buy the scissors alone (as a ‘replacement’) and they make a really effective Ultralight Backpacking…

Downloads
195
Likes
53
Rating
5
P
PrintablesOliverP

6mm Bit Driver for Victorinox 91mm SAK

Introduction This is a 6mm (1/4 inch) hex-bit driver I made for my 91mm Victorinox SAK. It will only work with 91mm Victorinox knives, but I also made one for 111mm knives. I tried to make it as durable and universal as possible, and it…

Downloads
184
Likes
29
Rating
4.5
P
PrintablesSprintyPrinter

Victorinox Fibrox Fillet sheath / protector

Easy to print sheath for Victorinox Fillet knife

Downloads
182
Likes
12
Rating
0
P
PrintablesPipoJoE

Logo Victorinox

Logo pour inscription sur une plaque

Downloads
176
Likes
5
Rating
0

A victorinox corkscrew blank with a pin

If someone could manage to make this stronger, my pin keeps breaking.

Downloads
175
Likes
34
Rating
0
P
PrintablesDan

Knife handle scale for Victorinox 111mm models

they are thicker than the orginal scales but you can scale them down if you want.

Downloads
160
Likes
16
Rating
5
P
PrintablesSalam Tmera

Victorinox 4mm bit adapter

Works with rambler, jet-setter, mini-champ or any 58mm with Philips. Print on an angle for best results. Takes a 5mm magnet to securely hold the larger bits. Edit: new files will not exactly match pictures

Downloads
153
Likes
23
Rating
0
P
PrintablesHugoLab3D

Zelda Hinox with bottom for tag125

I added a bottom for tag125 if you want add amiibo

Downloads
150
Likes
21
Rating
0
P
PrintablesChris

Victorinox SwissCard replacement case Remix

@TomHaynes_30709 created a nearly perfect replacement case for the swisscard. My case had broken so i printed his and everything fit perfectly, but the knife, pen and toothpick were just falling out. So i looked at the old case and there…

Downloads
147
Likes
12
Rating
0
P
PrintablesVirtuallyJason

Gloomhaven Female Inox Brute

Since the community has nice models for just about every monster in the Gloomhaven bestiary, I decided that it would be fun to do a gender-swapped characters project! So, I decided to start with the Inox Brute, mainly because Inox are rad…

Downloads
146
Likes
27
Rating
5
P
Printablesmartin.demling

Victorinox Swisstool belt clip

This belt clip is inspired by this model , although I created the CAD model from scratch. Changes to the original: more space for the belt loop, add a closing mechanism that takes a piece of filament to stay secured. Use a lighter and…

Downloads
144
Likes
25
Rating
5
P
Printablesdaemon512

Victorinox Santoku Knife Sheath

Using the https://www.printables.com/model/53253-parametric-kitchen-knife-sheath-improved-remix parametric file, I made a sheath for my Victorinox Santoku. Printed with the thin, non-curved side down in Prusament PLA. Fits well and…

Downloads
135
Likes
11
Rating
0
P
PrintablesNuleiv

Thermo Base for Luminox (Lumilagro)

Custom base for replacement of a Luminox Thermo (Lumilagro). PLA Printed. Not support. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Generic PLA Notes: No notes…

Downloads
135
Likes
4
Rating
0
P
Printablesashpool

Helinox Chair Foot

I printed these in PETG with 4 walls. No support is needed.

Downloads
133
Likes
23
Rating
5
P

Inox Guard [Gloomhaven]

3d Version of inox guard from gloomhaven Please note that I made this model for myself, so it can be a bit trick to print

Downloads
132
Likes
14
Rating
0
P
PrintablesDesmodromic

Victorinox Fibrox Paring Knife Block - Knife Holder

This is a compact countertop knife block to keep your Victorinox Fibrox 3.25" paring knvies organized. These are fantastic little knives, they are easily sharpened, take a keen edge, dishwasher safe and are dirt cheap to replace if you…

Downloads
131
Likes
15
Rating
0
P
PrintablesC B

Victorinox knife sheath - table knife 220mm

I made the Modell longer for : Victorinox "Tomato and table knife" 220mm Print in stl file orientation ! Printer : Flsun V400 Walls 4; top 10 ; bottom 10 layer height : 0,1 line width : 0,4 infill 25% ; no support ; print time ~ 1,5 h…

Downloads
128
Likes
17
Rating
5
P
PrintablesRolf

Helinox Ball Feet over the rubber feet

I printed this model on Prusa MK3+. Filament: PETG Infill: 50% Layers: 4 Printed with hole down (to the heatbed). No support needed.

Downloads
127
Likes
15
Rating
5
P
PrintablesRayfor

Minox Film cassette and film specs

Minox Film cassette and film specs reverse enginnering from orignal minox film see pdf for film specs

Downloads
126
Likes
5
Rating
0
P
Printablessteelrat.edc

Disassembly Jig for Victorinox 84mm & 91mm Swiss Army Knives

A disassembly jig to easily drill out the rivets on a flat surface. The cutout is for the corkscrew/phillips-screwdriver. Can be used on both sides, but depending on your nozzle and settings you might have to change the diameters on the…

Downloads
125
Likes
15
Rating
5
P
Printablesleviking

Minox 35 lens to LTM

I bought quite a few broken beyond repair minox 35's and decded to take a couple apart to attach them to a leica body. You need the tiny screws from the minox that hold the lens on. No guarantees.

Downloads
124
Likes
7
Rating
5
P
PrintablesAdam2000

Kurwinox neon led

Model główny został podzielony na 4 części w celu wydrukowania modelu na prusie mini+. Model został stworzony do zastosowania pasków neon led flex o rozmiarach 6x11.

Downloads
120
Likes
8
Rating
0
P
PrintablesKiwiMaCzaro

Kurvinox

Polecam drukować części pojedynczo w tej samej skali i posklejać pozdrawiam

Downloads
119
Likes
10
Rating
4
P
PrintablesSpotmatic

Minox 35ML & GL 30mm filter adapter

Minox 35ML & GL 30mm filter adapter. This adapter replaces my old adapter: https://www.printables.com/model/173716-30-mm-filter_screw-to-push-on-adapter-for-minox-35 IMO, this one has a much better fit and also shows the distance scale.…

Downloads
118
Likes
10
Rating
5
P
PrintablesMrLee

Victorinox SwissCard Knife Blank

When traveling I often worry I'll leave my SwissCard in my backpack etc and end up in trouble in an Airport. I could just remove the knife (or be more careful! :P) but then it would leave the hole open for dirt and grime. I designed this…

Downloads
115
Likes
16
Rating
0
P
Printablesthinbegin

Minox / 8x11 development Reel - v1 (Nikor/Stainless-fit)

I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc, etc), I started getting approached by people wanting one of equal quality for the Minox 8x11…

Downloads
112
Likes
11
Rating
0
P
PrintablesThe_JesteOAO

Victorinox 84mm scales

EDIT: Check your knife before printing! Scale have holes for only three rivets. Fits Victorinox Recruit. Remixed from @ Punkelopment. I made these in Wood-filled PLA and fit is almost perfect. You might tweak it a little depending on…

Downloads
111
Likes
15
Rating
0
P
PrintablesSelig

Victorinox Midnite Manager USB upgrade

I have been carrying a Victorinox Midnite Manager with an USB stick for quite some while. Unfortunately, Victorinox does not provide any upgrades to those USB sticks. As I need to carry quite a few extra GBs of data with me, I wanted a…

Downloads
110
Likes
24
Rating
0
P
Printablesdm1x

Victorinox Tomato Knife Sheath

as other models didnt workout for me, i created one by myself. both parts need to be aligned and then welded together, e.g. with soldering iron. or use some glue.

Downloads
109
Likes
14
Rating
5
P
Printablesboennhoff

Victorinox Knife Cover (58mm)

I love my tiny swiss army knife from Victorinox. So after the covers broke, I had to make them myself. I recommend printing the LED cover with a transparent filament. They snap on without trouble, but don't get off again easily :-)

Downloads
103
Likes
14
Rating
5

Victorinox Toothpick for third Slot in Plus Scales

Remix of HolzMax Toothpick to fit in the third plus scale slot. Perfect to carry a toothpick and the Firefly Firerood in a plus scale victorinox. Printed with 0.1mm layer height. Instruction to open the third slot from Felix Immler:

Downloads
102
Likes
22
Rating
0
P
PrintablesMAKERTEAM®

OPEN BLADE stand for VICTORINOX knifes like Huntsman, Spartan etc.

Presenter / stand for the well known VICTORINOX, WENGER and other swiss (pocket) knifes. There a TWO versions available: With & without logo. This modell has been made for the larger Victorinox knifes with a length of >90mm . For the pics…

Downloads
102
Likes
14
Rating
0
P
Printableskyrios patatas

Victorinox tweezers, toothpick & needle holder

A simple, compact holder for Victorinox tweezers and toothpick, with a hole for attaching to a keyring or lanyard. Both tools fit into the same slot, with the tweezers acting like a spring to hold everything in place while also covering…

Downloads
100
Likes
15
Rating
0
P
PrintablesVirtuallyJason

Gloomhaven Inox Guard Monster

Hi everyone - this is just a quick remix of my female Inox Brute model to change her shield around and make it look more like the artwork for the Inox Guard monster. I hope you enjoy it! Category: Toy & Game Accessories

Downloads
100
Likes
20
Rating
0
P
Printablesrodsgear

Minox Color Minotar to Leica M conversion

This is a one piece adapter to adapt the Minox Color-Minotar 35mm f2.8 The cool thing with this conversion is that the native aperture and focus still be functional. There is no rangefinder coupling. Hood and the aperture ring are…

Downloads
93
Likes
11
Rating
0
P
PrintablesCrambambuli

Quick-Release Belt Clip for EDC (Victorinox+Olight)

Very robust and secure design. I made many iterations to optimize it.

Downloads
93
Likes
20
Rating
5
P
PrintablesSpotmatic

PiCaMi - Minox pinhole camera with shift option

Conversion of a Minox 35 body to a pinhole camera. Please, read the pdf for details. NOTE: The assembly pdf file is found among the stl-files or you may try this direct link . Tools and material needed PETG filament black Loctite Super…

Downloads
93
Likes
23
Rating
0
P
PrintablesObolski

Box for Victorinox Knife

Suitable for storage or as a gift box. I added a small loop that keeps the box closed. It can also be printed in PLA.

Downloads
93
Likes
14
Rating
0
P
PrintablesSalam Tmera

Victorinox corkscrew to 4mm bit driver

WARNING: this model can and probably will scratch up your scales Print out of PETG or a stronger material for best results. Infill 100% or print with 8-12 walls.WARNING: this model can and probably will scratch up your scales Print out of…

Downloads
92
Likes
11
Rating
5
P
Printablesvisualplastik

Victorinox Cybertool Bit Locker

After losing a bit I tried a standard 4mm one without a detent ball, only to see it immediately fall out. But the ones with the ball are fairly loose anyway so I didn't want to buy more. Made this stronger holder which doesn't block the…

Downloads
92
Likes
20
Rating
0
P
PrintablesMaWoKo_3D_Druck

Victorinox 58mm Mini

Cover für das Victorinox Mini, lasst bitte einen Like da oder folgt mir für mehr damit ihr nichts Neues Verpasst Danke MazZe_2880

Downloads
92
Likes
17
Rating
0
P
PrintablesQBrunner

Victorinox 91mm scale with pen, needle and toothpick cutout

This model should be printed with the outside of the scales on the printbed. This is the way it is already oriented. The model named “Scale” doesn't need any supports and can just be printed as is. The model named “ScaleWithCutout” needs…

Downloads
92
Likes
23
Rating
5
P
Printablesink

Printed Kydex for Victorinox Tomato & Table Knife

MAYBE using Supports for. What can I say? I saw this cool fake Kydex sheath for the Victorinox food knives from dtxtr [1] and really wanted the same thing for the tomato knife. Using a lighter to heat up the folding line. Take a look at…

Downloads
91
Likes
18
Rating
4.5
P
PrintablesBulgogi Prince

Flexi Hinox BOTW

**If you print it please post a make and let me know how I could improve the model My autistic son watched me play Legend of Zelda: Breath of the Wild and fell in love with Hinox. He asks me to print hinox out frequently. I decided to…

Downloads
90
Likes
10
Rating
5
P
PrintablesSpotmatic

Minox 35 Hot Shoe Cover

These hot shoe covers will protect your Minox of accidently being put in to flash mode. My GL easily get stucked once in a flash mode so this hot shoe cover does the job.

Downloads
86
Likes
9
Rating
0
P
PrintablesBupher

Helinox Chair Replacment Foot

Replacment foot for helinox camping chair Print Settings Printer: Flash Forge Creator Pro Rafts: No Supports: No Resolution: .1 mm Infill: 100% Post-Printing Take a 1/2 in drill bit, i used an endmill in a drill,down the middle to clean…

Downloads
83
Likes
5
Rating
0
P
PrintablesTomasBouda

Victorinox EDC Scissors

Help me create more FREE models! If you enjoy my creations, consider becoming a supporter of my Printables club or you can buy some of my products . Your support helps me cover the costs of materials, energy, and time, allowing me to keep…

Downloads
82
Likes
25
Rating
0
P
PrintablesBazzar701

Tiny Chevy Equinox EV - Mini Cars Series

Chevy Equinox EV, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…

Downloads
82
Likes
25
Rating
0
P
Printablesucito

Helinox end cap with rope clamp for rubber rope for 17,4mm poles (Chair One XL, Swivel Chair, Sunset Chair, Savanna Chair, Bench One)

If, like me, you are a little clumsy and, for whatever reason, pull too hard on the chair leg and end up breaking the plastic part, you will find a replacement part here to reassemble and use the chair. Fits the Helinox chairs with the…

Downloads
80
Likes
9
Rating
0
P
PrintablesGhostguy6

3 or 5 91mm Victorinox/Swiss Army Knife Holder

Victorinox/Swiss Army Knife Holder to hold 3 or 5 knives. I expanded on MFM15's design to allow each holder to hold 3 or 5 91mm swiss army knives depending on your preference. It also works with Alox scaled knives but is a bit loose at…

Downloads
79
Likes
7
Rating
0
P
PrintablesChuck B

Equinox 800 shaft plug

Equinox 800 shaft plug, enlarged the orig to fit the shaft.

Downloads
79
Likes
9
Rating
0