Search results: instax

Sort order

370 models

P
PrintablesChrisfu

Instax Mini magnetic fridge frames

===Update=== Stand added ===Update=== Instax Mini Magnetic Fridge Frames, with an overall thickness of only 3mm. I recomend the textured sheet for a shiny surface finish. The frames can be equipped with magnets (6mm x 3mm x 1.5mm) to…

Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
215
Likes
92
Rating
5
P
PrintablesSonny13

Card holder mountain Berg instax picture

Print both parts an insert the clip into the base. Depending on the thickness of your card you can use the prefered slot in the base. Display your favourite card or picture. To fit the clamp in the slot it might be easier if the corners…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
17
Rating
0
P
PrintablesEgg Plane Man

Standard for lace or (Instax) photo's

my wife made this lace and asked if I wanted to design a stand. After it was finished I also saw possibilities to use it as a photo stand for photos of, among others, Fuji film instax photos I included the FreeCad File so you can adjust…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
6
Rating
0

The Simplest Instax Polaroid stand

Print upright (like the .STL) Add a brim! Enjoy printing :)

Downloads
5,510
Likes
2,079
Rating
5
P
PrintablesDylanRyanDesign

Stand for Instax Polaroid Fujifilm Photos

Simple and Minimalistic Polaroid photo stand Designed this to accommodate some of the dozens of polaroid photos we have laying around the house, prints quickly and looks good in numerous colours. The stand holds the photos at an angle…

Downloads
2,244
Likes
492
Rating
4.96
P
Printablesnoahrr

Instax mini picture holder

small picture holder for instax mini photos can be mounted to the wall with a small nail or put on a desk or shelf with the stand. I have also included a mount that holds standard 4x6 pictures the stand also works with 4x6 pictures in…

Downloads
988
Likes
960
Rating
5
P
Printableserktheoger

Instax Mini Evo Lens Cap

The cover fits within the standard instax cover, the cover does close completely on the magnet. Printed using voron2.4 Magenta esun ABS, 0.4mm nozzle, print with brim (recommend 3mm), print face down

Downloads
957
Likes
74
Rating
5
P
PrintablesRohweron

Instax Photo Frame

I made this small Instax photo frame with which you can easily swap photos and which hides the borders of the picture. Printed with: 0.16mm Layer 2 Wall loops 35% Cubic infill (infill can be reduced but i decided to go with a higher…

Downloads
850
Likes
201
Rating
5
P
PrintablesDimmu_Ogir

Flap frame (flipbook) clock for instax-polaroid photo

A very cool photo frame clock for Polaroid/Instax photos. Can hold 30 photos Using Arduino you can automatically rotate and change photos Assembly instructions: Inside Components "3 L mount" & "3 R mount" there is a channel to lay the…

Downloads
847
Likes
930
Rating
3.83
P
PrintablesGruensil

Polaroid frame (Instax)

Simple print in place frame for polaroid photos (tested with instax fujifilm). Just slide the photo into the frame and you are good to go! It has a very stable stand (that annoyed me about other models). No supports or brim needed For…

Downloads
829
Likes
104
Rating
4.5
P
PrintablesMakerDAD

Fujifilm Instax Mini Triple Photo Frame

This is a modified version of the "Instax Photo Frame" by o0aaron0o, you can display 3 photos instead of one. Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor

Downloads
795
Likes
155
Rating
5
P
PrintablesShared Objects

Instax Photo Frame

Display your Instax prints on the wall or tabletop in either portrait or landscape mode. Swapping prints is easy with the dovetail style slider and nested cavity. Print instructions Category: Decor Summary Display your Instax prints on…

Downloads
785
Likes
214
Rating
4.71
P
PrintablesRT3D

Fujifilm Instax Mini Photo Frame Stand

I created a stand version from my Christmas tree hanging photo frame found here. Reference: https://www.prusaprinters.org/prints/93150-instax-mini-photo-frame-tree-ornament Add the photo and place wherever you like. Update: 06/06/2022…

Downloads
780
Likes
111
Rating
4.88
P
PrintablesRADdesign

Instax Mini Rotary Photo Album

Rotary Photo Album The Rotary Photo Album is designed to store Instax Mini Photos. Turning the device simultaneously lowers pictures while raising new ones. Prints I printed this on my Bambu P1S. I tested that the top and bottom could be…

Downloads
745
Likes
281
Rating
5
P
PrintablesJayFiDev

Instax Mini Picture Frame - vertical & horizontal

Update - still finetuning the model, but current stl is okay to use! Update - 03.12.2017 - Update Model with smaller tolerances! Small project to generate a picture frame for my new Instax Mini Camera. Designed to be used horizontal and…

Downloads
702
Likes
106
Rating
4.89
P
PrintablesMakerDAD

Fujifilm Instax Square Photo Frame

I couldn't find any frames for the Instax Square Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor

Downloads
643
Likes
114
Rating
5
P
PrintablesSPRKPLG

Mamiya Press or Polaroid 600SE to Instax Wide 300 Adapter Kit

Update 3/31/23: Added version for Polaroid 600SE lenses. ---------- Update 1/18/2022: Made some improvements to the lens locking method for a much more secure shooting experience. The screw is now no longer a set screw, just a lock screw…

Downloads
621
Likes
39
Rating
5
P
PrintablesVictor

Instax Square Photo Box

Keep your photos organized and protected. Has 5 separate compartments so the photos will stay upright. Will fit 5 x 17 photos. Print with flat sides on the print bed. Printed at 0.2mm layer height.

Downloads
586
Likes
101
Rating
5
P
Printables_FirstLayer

Instax Wide Photo Frame

I really like the sleek design of the Instax photo frame by Shared Objects . The orignal design only fits the Instax Mini, but Instax film is available in 3 formats, Instax Mini, Square and Wide. I remixed it to also fit the Instax Wide.…

Downloads
535
Likes
96
Rating
4.17
P
PrintablesLyraNgalia

Instax Mini 12 Flash Cover

A quick and dirty flash cover/diffuser for the Instax Mini 12, which sit more flush against the camera body than the Instax 11. This cover sits flush against the flash, and does not ‘snap’ on securely. I prefer using a removeable adhesive…

Downloads
502
Likes
12
Rating
0
P

Case for Instax Mini

4/XXX Instax Mini Case I'm doing a challenge where I'll upload 1 model a day until I reach 10k Prusameters or more so I can own a PrusaMini or PrusaMK4 This is a case for Fuji Instax Mini Photos. It features a snap-fit cover and can hold…

Downloads
481
Likes
112
Rating
4.83
P
Printablesd00kie

Instax mini Holder

Simple and quick to make Instax mini holder. My plan was to make something minimal and stable. Gcode provided for Ender 3 V3 SE; Material: eSUN PLA + Nozzle: 0.4 Temperature: 210/60 Layer height: 0.10 Print time: 12min

Downloads
479
Likes
76
Rating
5
P
PrintablesKyne

Skadis Photo Clip (Instax, Polaroid, Instant Photo)

A tiny clip for your Ikea Skadis to hang up your beloved photos. I used it for photos created with the Fujitsu Instax Mini. I'm sure you can use it for any instant/polaroid camera. Make sure to print it sideways with support.

Downloads
466
Likes
89
Rating
5
P
PrintablesKaJashey

Instax mini EVO 52mm filter adapter

An adapter to use 52mm filters with an Fuji Instax mini EVO. It just pushes onto the lens barrel. A previous design was too tight and could pull off the lens barrel when removing the print. CAUTION: to remove use your thumbnail to push…

Downloads
441
Likes
50
Rating
0
P
Printablespathetap

Instax Mini (11) Door Clip

This is a removable replacement clip for the Instax (11) Mini Polaroid door. The original clip is pretty prone to breaking as it is made of a thin flexure. This one is heavily inspired by the original design, which I emulated based on…

Downloads
431
Likes
14
Rating
0
P
Printablesnerologic

Instax Wide Scanning Frames- Get Even Borders and Prevent Newton Rings

I shoot a lot of Instax, especially now that I adapted a LomoGraflok back to my Graflex SLR, and I like to scan the film for sharing or before giving away the unique physical copies after shooting portraits. I designed this frame to save…

Downloads
407
Likes
74
Rating
5
P
PrintablesBobby

Instax Photo Frame

I wanted to have a picture of my family on my desk at work, so I created this simple Instax photo frame. Prints at 0.2mm, no supports, Prusament Galaxy Black PLA. UPDATE: [03.03.2024] V2 Design available with bigger clearance and extended…

Downloads
395
Likes
88
Rating
5
P
PrintablesMakerDAD

Fujifilm Instax Wide Photo Frame

Fujifilm Instax Wide Photo Frame I couldn't find any frames for the Instax Wide Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only.

Downloads
385
Likes
47
Rating
5
P
PrintablesCarWalkerMail

INSTAX MINI Photo Stand Frame

Specially crafted model designed for Instax Mini photos or prints around 53x86 in size. Perfectly suited for 3D printing, this piece offers a stylish and unique way to display your memories. Download now and bring a personalised touch to…

Downloads
357
Likes
43
Rating
5
P
PrintablesSPRKPLG

Big Wide Camera (Big Shot style Instax Wide)

Detailed instructions: https://sprkplg.com/big-wide-diy/ Decided to put that all on a blog as some of it may change, and I will refer to it often on other sites. Original instructions are attached here in PDF form, but they are outdated.

Downloads
329
Likes
44
Rating
0
P
PrintablesRT3D

Instax Mini Photo Frame Tree Ornament

I created a little hanging photo frame for the Instax minis. Add the photo and hang it on the tree or wherever you like. Print Settings: Printer: PRUSA MK3S Resolution: 0.2mm Layer Height (0.4mm Nozzle) Filament: PLA Supports: Optional…

Downloads
328
Likes
83
Rating
5
P
Printables_FirstLayer

Instax Square Photo Frame

I really like the sleek design of the Instax photo frame by Shared Objects . The orignal design only fits the Instax Mini, but Instax film is available in 3 formats, Instax Mini, Square and Wide. I remixed it to also fit the Instax…

Downloads
325
Likes
60
Rating
5
P
PrintablesBenjamin Story

Instax Mini-Fotorahmen mit Disneys Mickey-Mouse-Ohren

Darauf bitte bitte keine kleben draufmachen/weil wenn du das foto aufmacht klappt das nicht deswegen besser ohne kleben ok Dankeschön euch alle !!

Downloads
318
Likes
84
Rating
5
P
PrintablesFab5

Polaroid Frame and Box for Instax mini

This is a smaller version of the polaroid display box. I printed this at 0.2mm with 20% infill and 3 walls. No support or adheasion needed. There is a little wider option for storing more polaroid pictures.

Downloads
317
Likes
55
Rating
5
P
PrintablesVasichkin

Frameless card holder, Instax, Polaroid photo stand

It's another minimal frameless stand to place your Instax, Polaroid pictured. It will work for photos and cards too. It has curved profile, so big pictures will stay straight. Print takes from 15 min and requires from 4g of plastic 4…

Downloads
314
Likes
55
Rating
5
P
PrintablesAndre Stadler

Instax Mini Photo box

Print with flat sides on the print bed. Printed at 0.2mm layer height. Keep your photos organized. Uploaded also a version without the text as requested. Big model is twice the size of the first one.

Downloads
291
Likes
69
Rating
5
P
Printablesdiyit

Instax Mini Magnet Frame

Print model with PLA, PETG, ABS using 0.2 layer height, 15% infill. I use 0.6mm nozzle but 0.4 will also work. Prints without support. You will need 2 small magnets per frame: 5 mm in diameter and 2 mm thickness. You can get them cheap…

Downloads
286
Likes
71
Rating
4.67
P
PrintablesANTALIFE

Modular instax mini Frame

Had too many pictures from the recent travels, so decided to make a modular frame to hold them up. If printed in PLA would recommend using super glue to fix all pieces together, otherwise if in ABS then acetone would work To fit instax…

Downloads
277
Likes
87
Rating
4.5
P
Printablesitsleon

Fujifilm Instax mini Film / pic box V2

A Box for films and instantpics for Fujifilm Mini V2: tighter pressfit

Downloads
268
Likes
99
Rating
5

Instax mini 12 flash cover

Instax mini 12 flash cover Category: 3D Printing

Downloads
261
Likes
8
Rating
5
P
PrintablesYeet

Lubistax - TLR instax

Non destructive modification for Lubitel 166B camera to turn it into instant camera. Uses Instax square cartridges. Check notes for each file. Except a few files, all should be printed without supports. Use at least 3 walls and 20%…

Downloads
260
Likes
44
Rating
0
P
PrintablesHeidi Makes

Instax Camera Frame Display

This model was designed to be a table display for Instax Frames. It can be used together with my Instax Frame and Keychain model or with standalone Instax frames. Printing Advice This model requires a little bit of support on the camera…

Downloads
259
Likes
50
Rating
5
P
PrintablesB2000

Simple Instax Mini Stand

This is a minimalistic and easy to print stand for pictures that are taken on Instax Mini instant-film. The cutout on the front is deep enough to make room for the text on film that features the contact-sheet-look. Update: A longer…

Downloads
254
Likes
45
Rating
4.8

Polaroid/Instax photo holder HEARTH

Hello guys, I was tired of my Polaroid photos being on desk laying so I decided to make this holder which is modular and I will add more modules besides heart. This print only takes a few seconds and will be a great addition to your desk…

Downloads
253
Likes
46
Rating
5
P
PrintablescRckls

Instax mini modular wall frame

I wanted a frame for Instax mini photos that: held a lot of photos minimal amount of frame covering the photos easy to get photos in and out, but held them securely could be hung on the wall These are modules of 6, which is the maximum…

Downloads
235
Likes
78
Rating
5
P
PrintablesBigfoot Lukas

Instax Polaroid frame

Print 0.1mm. Supports for the photo exchange hole.

Downloads
220
Likes
43
Rating
5
P
PrintablesFunFam3D

Gnome Instax Mini Picture Frame

Gnome themed picture frame for Instax Mini pictures. Support probably needed for inside of frame. 3mf and STL files available. *Update to Version 3 with 75% smaller file size *

Downloads
215
Likes
70
Rating
5
P
PrintablesBryn Parish

Instax Mini Photo Album!

This small Instax Mini photo album is perfect for storing your photos safely and conveniently from each vacation! Create little booklets for all of your favourite memories, one for each trip! Choose between either the hard cover (solid…

Downloads
214
Likes
118
Rating
0
P
PrintablesBosman_27

Photo frame - instax mini

Zdjęcia INSTAX mogą nabrać nowego przeznaczenia.

Downloads
205
Likes
27
Rating
0
P
PrintablesJohnM

Instax mini & Polaroid go photo film holders / stand / frame

Simple little holder for instant pictures

Downloads
205
Likes
26
Rating
5
P
PrintablesEMarrs

Instax Mini Magnetic Frame

Magnetic frame for fuji instax Mini photos. No supports are needed. Print with backside flat against the bed. To insert a photo, bend it slightly so it catches the notches, then push it flat. See post it note in photo for reference. To…

Downloads
203
Likes
47
Rating
5
P
PrintablesOdbix

Minecraft nether portal instax photo frame

This model is designed to fit an instax square photo. The portal is split into 2 parts so it can be printed without supports, but this means you have to use glue to attach the top bar with the portal body. Sadly, I don't have an Instax…

Downloads
202
Likes
106
Rating
0
P
PrintablesTurbopstros

Valentines Heart Picture Frame | Instax Photo Stand

A minimalist double heart picture frame designed for instant and classic photos. This model works great with Instax photos, Polaroid photos , and standard printed photos that fit the slot. The upload includes two different heart designs…

Downloads
199
Likes
47
Rating
5
P
PrintablesSPRKPLG

Lomograflok Instax Square Mod

Go with your trusted material and settings for small flimsy parts. I used Prusa CF PC blend, and Priline CF PC. PETG should work fine. Haven't tested with actual photos yet but spring tension seems good, and test frames eject from both…

Downloads
199
Likes
42
Rating
0
P
PrintablesJakJak

Rugged box for instax square

I wanted a travel box for storing instax square photos. Close the lid and throw them in my bag without worry. I removed the second latch and hinge as it seems superfluous for a box this small. Also is easier to open. And saves on screws…

Downloads
199
Likes
39
Rating
0
P
Printablesmloska

Universal Instax Mini Modular Frame

These models allow you to create your own unique desk or wall frame for Instax mini photos. Their modular design makes it easy to expand with each new picture you capture It will work with both for horizontal or vertical pictures.…

Downloads
196
Likes
56
Rating
4.67
P
PrintablesMyGeekyMuse

Magnetic Photo Frame (Polaroid/Instax style)

Size: 72 mm x 86 mm x 3 mm Recommended picture size: 66 x 66 mm (Picture window size: 62mm x62 mm) Holes size: ø 10.2mm x 1 mm - Use strong magntes ø 10 mm (1-2 mm thick) Used print settings 0.20mm, PLA (White) Infill: 15%

Downloads
194
Likes
62
Rating
0
P
Printableskscarlett

Instax Wide Photo Box

Like Victor's original, it has 5 separate compartments so the photos will stay upright. Will fit approximately 5 x 17 photos. It should realistically print at any layer height - it's just a box with no overhangs or intricate details.

Downloads
193
Likes
33
Rating
5
P
PrintablesAmoda

Modular Frames for Small Photos (Instax)

Description: I designed this modular frame system because I wanted an easy to change and design format for my instax photos. For me this design needed to: Have a bit of wall presence. I wanted to make the frames thick enough to sit…

Downloads
192
Likes
83
Rating
0
P
Printablesjavier crespo

Marco fotos instax mini

Marcos de fotos para las láminas de la instax mini.

Downloads
189
Likes
21
Rating
0
P
PrintablesJakJak

Compact parametric box (for instax square)

Parametric box for protecting instax photos. 28mm width fits 20 shots, 42mm fits 30 shots, and so on. Less rugged than what it is remixed from, but more compact. I've kept previous design iterations, but I recommend using the latest V3…

Downloads
187
Likes
30
Rating
0
P
Printablesla goose

GUESS WHO: Instax mini edition!

Ok here is the deal, I have taken, the classic game GUESS WHO and produced a version that you can play at parties, Step 1: take a picture of your friends. Step 2: assemble the game board. Step 3: try and guess who the “best” friend…

Downloads
185
Likes
57
Rating
5
P
PrintablesPat

INSTAX mini PHOTO FRAME

I saw this kind of frame design for instax mini photos somewhere. Again, I spend some time in Fusion 360 and WALA… I printed with PETG-CF and turns out quite nice. Nothing special for printing really. You just need to remember to use…

Downloads
181
Likes
82
Rating
5
P
PrintablesSasPes

INSTAX frame for 5 pictures

INSTAX frame for 5 pictures ... 2 horizontal & 3 vertical .. or vice versa ... Remixed from: Modular INSTAX Frame https://www.thingiverse.com/thing:3817814 Designed by: ANTALIFE https://www.thingiverse.com/ANTALIFE Print Settings Printer…

Downloads
176
Likes
25
Rating
0
P
PrintablesSir Cheese

Instax Mini Box Insert for Pokemon Mini Tin

A simple storage solution for your Instax Mini photos for those that have Pokemon Mini Tins laying around. And if you have been printing New Pokemon Snap photos using the Fujifilm Instax Mini Link, this is the perfect themed box to hold…

Downloads
174
Likes
30
Rating
5
P
Printablesmarekschmitt

Instax Mini Film stand

This stand is designed for Instax Mini Films with a width of 54mm. The polaroids fit perfectly into the slot. The model should be printed on the side for the best results.

Downloads
168
Likes
36
Rating
5
P
PrintablesB2000

Simple Instax Square Stand

This a wider version of the Simple Instax Mini Stand so it can be used with the larger Instax Square instant-film. The print in the picture is printed with a Creality Ender 3 printer with PLA Filament and sliced with Cura default settings…

Downloads
167
Likes
30
Rating
5
P
PrintablesOcelotzlasu

Vase mode photo stand - Instax & Polaroid

Simple instant camera photo stand, meant to be printed in vase mode (doesn't have to be). Change the scale on Z axis to adjust the width: Instax: Mini - 53mm Square - 71mm Wide - 108mm Polaroid: i-Type/600/SX-70 - 88mm Go - 54mm If you…

Downloads
166
Likes
48
Rating
5
P
PrintablesStevanastardust

Easy Print Instax Mini Photo Frame

I designed this frame to be a super easy print on any printer. Many of the Instax mini frames on Thingiverse have a bar up on top like a conventional photo frame but this always made them challenging to print correctly. I decided to…

Downloads
164
Likes
26
Rating
0

Instax Mini Scanmask

Scan your Fuji Instax Mini photographs easily and aligned on a flatbedscanner, 6 at a time with this scan mask. Top part is clamped to the baseplate with 32pcs of 3x1mm Neodymium magnets. Also available for APS film and Polaroid: APS:…

Downloads
161
Likes
36
Rating
0
P
Printablescwollman

Instax Mini Picture Frame

This ordinary print was nice and handy so I entered it into this contest and it was my first enter ever . Printed with the bottom side down. You are going to have to orientate the print in the slicer.

Downloads
160
Likes
42
Rating
5
P
PrintablesVec4

Fujifilm Instax Mini/SQ/Wide Film Carry Case

Prints in place without supports. Fits around 25 films.

Downloads
159
Likes
24
Rating
5
P
PrintablesCalarok

Fujifilm Instax Mini - Wall photo picture frame

Hi! I didn't find some nice easy to print simple picture frame for Fujifilm instax mini so i draw 5 models. Really easy to print. You can print the 5 frame on a MK3S in one print with no skirt. Their hole in the back to hang them on some…

Downloads
158
Likes
50
Rating
0
P
PrintablesSGV

Instax Mini Photo Magnetic Frame (no supports, no glue, gridfinity size magnets) STL STEP

Magnetic frame for your instaxmini photos. Uses 6x2mm magnets. Press in photos to lock them in place. 6x2 is also the same size magnets that gridfinity uses for its grid plates so you may have some laying around already. Magnets can be…

Downloads
158
Likes
25
Rating
5
P
PrintablesHeidi Makes

Instax Frame and Keychain

Instax photos are really cute and make for a nice little present when you meet with friends and family that you dont see in a long time. I designed these little frames to turn an Instax into a little present I can give to my loved ones,…

Downloads
157
Likes
29
Rating
0
P
PrintablesBuck Walker

Instax Mini Film Storage Box & Display Frame for Photos

Here is a simple little storage box with a display frame on the front.

Downloads
147
Likes
39
Rating
5
P
Printablespachek
Downloads
140
Likes
50
Rating
5
P
PrintablesPsykaze

Instax Mini Storage Box

Keep your cherished Instax Mini photos safe and organised with this stylish 3D printable storage box. Designed specifically to fit Instax Mini photos, this box ensures that your memories are well-protected and easily accessible. Key…

Downloads
140
Likes
16
Rating
5
P
PrintablesKaJashey

Instax Mini Evo Filter adapter 49mm

Allows you to use 49mm lens filter on an instax mini EVO camera. You can use colored filters, or a UV filter, or close-up filters, or a lens hood, or a step up ring. I print with organic supports to hold up the inner edge. Easier to pull…

Downloads
139
Likes
30
Rating
0

Fuji Instax Flash Diffuser for SQ1 Instax Mini

I design and made this for out door instax shots. For close up shots where the flash just over power the shot. Can be use for flash block or diffusing. You will need double side tape or velcro to secure to the camera. for diffuser i use…

Downloads
138
Likes
19
Rating
2
P
PrintablesOcelotzlasu

Thin Instax Photo Frames - all sizes

Thin frames for Instax photos. There are versions for Instax Mini, Square and Wide Use a bit of heat to bend the leg backwards to make the frame stand upwards The photos slide right in from the top Check out the simple photo stand or the…

Downloads
137
Likes
28
Rating
5
P
Printablesjkap

Instax Adapter for Vintage Kodak Instant Cameras

Re-upload from https://www.thingiverse.com/thing:6678393 Designed by Photochemicals. Please refer to the thingiverse link for instructions!

Downloads
137
Likes
23
Rating
0
P
PrintablesDavidB75

RB67 Mask for instax square back

This aid makes it clear where the boundaries are when shooting Instax Square on RB67. Printed in Polycarbonate for strength and durability. Layer height: first layer 0.2mm, succeeding layers 0.05mm Temp: 225 (Polymaker PC-MAX) Bed: 100…

Downloads
136
Likes
18
Rating
0
P
PrintablesNiecov

Magnetic Instax Mini Case

A simple and easy to print slide in case for your instax mini pictures. I really like to use them as fridge magnets. This way the magnets will never damage your pictures. It has a built in support but as a separate object if you would…

Downloads
135
Likes
42
Rating
5
P
PrintablesMarkTheMaker

Printable Photo Album For Polaroid 600, Fuji Instax Square, Fuji Instax Wide, Fuji Instax Mini

Introducing the Universal Instant Photo Album, designed for a wide range of instant film types including Polaroid 600, Fuji Instax Square, Fuji Instax Wide, and Fuji Instax Mini. This album offers a practical and straightforward way to…

Downloads
135
Likes
39
Rating
0
P
Printablespolicecaprice

Instax square adapter for Kodak instant cameras

Nozzle: 0.4, layers: 0.2 . This is a prototype, I will not develop it further, because 3 adapters work perfectly for me. You also need springs, sheet metal, sheet metal scissors, a file, sandpaper, a screwdriver and small screws and…

Downloads
128
Likes
29
Rating
0
P
PrintablesVec4

Instax Mini Film Carry Case V2

Instructions The body is easy to print, so print it with your usual speed settings and 2-3 walls. The lid will need to be printed slower (at least for the hinges) to allow for adequate cooling at each hinge, so print that at around 50mm/s…

Downloads
127
Likes
26
Rating
5
P
Printablesalexcocan

Fujifilm Instax mini 11 shutter button cap

I got a fujifilm instax mini 11 as a christmas gift. The buttons included with the camera did not stick on the double sided tape they came with, so I fired up Fusion360 and after 30min of modeling and 10min of printing I got this. Because…

Downloads
125
Likes
7
Rating
0
P
PrintablesLeo

InstaX Polaroid Frame (For 86mm x 54mm film)

This is a polaroid stand designed for InstaX 86mm x 54mm film. It stands up and displays pictures nicely that you can put on your desk or anywhere else. The polaroid goes in through a slit in the top of the frame. Prints fine without…

Downloads
125
Likes
16
Rating
5
P
PrintablesFunFam3D

Instax Mini Picture Frame

Standing frame to hold Instax mini photograph with cute hearts and stars.

Downloads
123
Likes
27
Rating
0

Instax mini We love u picture frame

This is a small picture frame that fits the Fuji Instax Mini perfectly. I hope you enjoy it. I would love to hear feedback and, better yet, see your prints. I am currently working on a two-color version as well. Printed with .4 nozzle…

Downloads
121
Likes
26
Rating
0
P
PrintablesBearded Printer

Instant Camera Picture Frames - Instax Mini, Square, and Wide

Update Feb 24, 2024: Updated frames so picture would be more centered vertically. Update Feb 23, 2024: Updated frames to increase clearance for better fitment of photos. No supports! The mini, square, and wide frames were designed for the…

Downloads
121
Likes
47
Rating
0
P
PrintablesCelta

Wedding Instax Photo Frame

This elegant wedding-themed Instax photo frame is the perfect way to display cherished memories from the big day. It features a beautiful floral pattern design and a dedicated space to add the wedding date, making it a unique and…

Downloads
118
Likes
33
Rating
0
P
PrintablesMagnetoduck

Lomograflok Instax Back Modified Focusing Screen Spacer for Speed Graphic

This is a modified version of the standard 19.5 mm ground glass spacer that comes with the Lomograflok Instax Wide Film Back. This should allow you to achieve sharp focus at wide apertures with a Speed Graphic that has a Fresnel focusing…

Downloads
115
Likes
20
Rating
5
P
PrintablestheXorios

Instax Fujifilm frame for Ikea SKÅDIS

Small simple frame that is compatible with Ikea Skadis system. Photo dimensions: 86*54 mm. Available in both directions.

Downloads
115
Likes
32
Rating
0
P

Whiteboard Memories (Instax) and Pen Holder (Parametric)

Whiteboard Memories and Pen Holder Introducing the Whiteboard Memories and Pen Holder, designed to keep your workspace organized and personalized! Featuring a unique front slot, this pen holder allows you to easily showcase your favorite…

Downloads
112
Likes
40
Rating
0
P
Printablesacornelissen

Instax wide ground glass cartridge

This is a simple printed instax wide cartridge designed around a Pentax 67 focusing screen from a broken viewfinder I had lying around. I use it to help with finding infinity and rangefinder calibration for my 110 conversions. I've…

Downloads
110
Likes
18
Rating
5
P
PrintablesSamthing_else

Instax Wide 300 Battery Cover

This is a very rough design for the battery cover on the Instax Wide 300. I lost the cover a while ago and finally got around to crudely designing one. My experience with CAD software is extremely limited, but this does the job. You won't…

Downloads
109
Likes
5
Rating
0
P
PrintablesRandomFilament

Instax Mini Polaroid Scan Adapter

I made this to be able to scan my Instax Mini pictures in a convenient and quick way while avoiding Newton Rings. It aligns all pictures perfectly on the horizontal and vertical axis to easily be cropped. You will lose 1mm of the white…

Downloads
108
Likes
14
Rating
0
P
PrintablesJe4nh4

Instax Magnetic Frame

Designed to fit 6x2 neodyme magnets. Printed in two parts : insert thé magnes in the base, place your picture on it and secure the whole by cliping the frame on top. Voilà ! ~5g and ~30min printing Depending on the surface you put it, and…

Downloads
108
Likes
36
Rating
5