Search results: ips

Universal Bag Clips

Larger sizes: https://www.printables.com/model/1200632-universal-bag-clips-xl

Philips Fixables | OneBlade 1-3mm comb

Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips OneBlade? Print yours now. Trim and style your beard, just the way you like it. About Philips Fixables Fixables is a collection of 3D printable spare…

Universal Bag Clips - XL

! After printing, remove the small supports on the hinge ! please use my gcode files for printing :)

OTF Fidget Knife Blade with stronger clips

I had problems with the original Blade not locking correctly, so i made the locking parts of the blade stronger.

Cable Clamps Clips

Quick clamp replacement or saving money the choice is yours. if any clamps/clips Designs to be made let me know I'm all ears. Best to print in PETG for Strength an Flexibility Screw holes are 4mm (cable clips are 3mm) 2mm thick for no…

Cableclips - Bistable Compliant Mechanism

Changelog 2024-12-21 v1.1 fine tuned print settings; cc 0.17; ct 0.18 2022-12-02 v1.0 initial public release Neatly organising the world of cables has lost a lot of hassle with these reusable cableties: The bistable mechanism quickly…

M2 - M10 Phillips Screws in all sorts of lengths (incl. STEP)

A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…

Pinecil Case (stores 4 tips, USB cable & accessories)

A Multipart Pinecil Case remix that is a bit taller (+5.2mm) with a different set of cutouts and accessories allowing a full set of spare tips to be stored. The dimensions have been change to allow clearance for a 2nd tip mount which…

Philips Hue Bridge Bracket

This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…

Beretta M9/92FS Grips

Replacement grips for a Beretta M9/92FS Spacer is not required, but may be useful if grip bolts are longer than normal due to original handle thickness.

Coffee Bag Clips

Accent your coffee corner with these fancy coffee bag clips. These clips will help keep those coffee grounds fresh! Just squeeze the folded bag top until it is relatively thin and effortlessly slide the clip over the fold. See my other…

Toothbrush + Induction Charger Wall Mount (Oral-B & Philips Sonicare)

At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…

Electric Toothbrush Holder for a family (2x Philips Sonicare + 2x Oral B)

Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…

Philips OneBlade Socket Holder

A cluttered sink, a dangling charger, a trimmer awkwardly balanced on the edge… sound familiar? This is exactly the kind of daily hassle that inspired me to design this socket-mounted Philips OneBlade holder. Thanks to real-world use and…

Skadis - Knipex Pliers - Electronic Super Knips

Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.

Floral Paper Clips

Floral paper clips for fun office. Printing from PLA, without supports, layer height 0.2 mm. Adjust the height as you need.

Philips Hue Lightstrip corner

Philips Hue Lightstrips make good TV backlights, but I had trouble mounting them facing directly towards the wall and bending them downwards near the edge of the TV. This simple part helps to hold them in place and keep them flat, while…

clips visière pour casquette anti covid-19

Système de clips qui permet de fixer une visière sur une casquette standard. Pour la visière j'ai utilisé une feuille transparente percée avec une perforatrice de bureau standard (trous de 5 mm de diamètre). Le but est des pouvoir offrir…

LTT "Quick Bits" Case & Stand for Linus Tech Tips Screwdriver Bits

I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…

Cute Animal Face Clips (Paperclips, Bookmarks, etc)

A bunch of cute little animal pals to help hold your papers or perhaps mark a page in your favorite book. Great for using up those small bits of filament left on your roll. These are ready for print, no supports etc. If you're one of…

Double Pipe clip - Conduit Clips - Ø 16 / 20 / 25 / 32 / 40mm - Clips Fissatubo Aperto Doppio

Pipe clip Ø 16 / 20 / 25 / 32 / 40mm, Double - Clips Fissatubo Aperto Doppio For fast installation of RNC, flexible & rigid conduit Suitable for: x2 Ø 16mm x2 Ø 20mm x2 Ø 25mm x2 Ø 32mm x2 Ø 40mm Resize to adjust dimension All our designs…

Flip-Up Brim Clips: The Sunglasses Cap Hack

Instead of throwing away a favorite pair of sunglasses after an arm snaps off, this model gives them a completely new, hands-free lease on life. This design allows you to securely mount a pair of glasses directly to the brim of any…

Conduit Clips

2 sizes conduit holder clips for PVC Conduit d = 16mm. Mounted using screws d = 3 mm or d = 4 mm :)

SHIPS (Schiffe versenken)

BESCHREIBUNG in Deutsch und Englisch DESCRIPTION in German and English Schiffe versenken Spiele den Klassiker zuhause oder unterwegs. Mit der praktischen Aufbewahrungsbox kannst du es überall hin mitnehmen. Drucke das Spiel in den Farben…

Decorative Dogs Paper Clips / Bookmarks

Designed for dog lovers, these stylish clips feature outlines of various popular breeds, making them a unique and fun addition to your office supplies. Features: 🐾 Nine Dog Breeds – Includes Poodle, Akita Inu, Shiba Inu, Dachshund, Pug,…

DIN Breadboard Clips/Holder

Simple clips to mount a breadboard to a DIN rail. Made to fit with the foam backing still on the back of the breadboard. Also check out my other DIN mounts on my profile :-)

Philips Speedpro Max brush axle

Had success printing it in ABS, PETG was to weak and snapped.

Mini Cotton Pads and QTips holder

I printed it in a Creality Ender 3 V2 0.4 mm nozzle, 0.2 layer hight, 20% infill, 210C and 60C Also used a brim to get a better adhesion. And for the seam alignment I used the option “random”. Took me 6h to print at 60mm/s and turned out…

Cotton pad and tips holder Uno

The original model is very attracting design wise, but the wall thickness looks a little bold. This remix also provides a Fusion 360 file to parameterize the height of pads, sticks, wall and bottom thickness to be customizable for the…

Shorter Christmas light hangers ( clips ) for a house

I created this to attach to the side of my house (where there isn't guttering) to hang our Christmas lights up (Merry Christmas by the way!). This is an alternative of my taller hanger with 2 screw holes. The picture shows the various…

90° Clamp Wall Mount for Philips Hue Lightstrips and PSU

ENG Attention: Not a genuine Philips component! You want the light strip to shine on the ceiling? No problem with this wall bracket. Simply screw it to the wall and clamp the Hue Light Strip in place. With several clamps, arches can also…

Philips SpeedPro Max 32mm nozzle adapter

This is a remix, the original model was made for ~35mm nozzles and didn't fit my 32mm ones, so I decided to create my own version of it. The diameter of the tip is 31.4mm and it increases to 32.2mm , it friction fits very nicely any 32mm…

Wargame Ships - Frigate

Wargame Ships - Frigate Printer: Prusa Mk3s Material: PLA, PTEG, etc Layer Height: 0.15 mm Infill: 15% Supports: Yes, on tips of sails and bowsprit Brim: None 20-24 -gun Frigate Circa 1812 Not to any particular scale. About 40 mm form…

Snooker Chalk Magnetic Pocket Clip (or Pool/Billiards, also clips to belt)

This model is a magnetic chalk clip designed for Triangle chalk, but any chalk of the same dimension should work (as they are all roughly the same size). There is a magnet embedded in the chalk holder and the chalk clip so that the clip…

SUP Paddle Board Paddle Clips

Clip your paddle to your paddle board. Have fun on the water.

Reinforced Feed Lips for CMMG 22LR Magazine

Field Notes Clips

While there are already existing models for clips for Field Notes, I found them all a little bit too loose, and I wanted a simple clip for my pen as well. I recommend printing the models with a brim, since they are rather thin and could…

Chapstick or Lipstick holder

An organizer for chapstick, lipstick, or similar items. Pictures are in rose gold, of course!

Rotating Ellipses Toy (golden ratio)

Rotating Ellipse Toy as fidget. 75mm length. Length to wide in golden ratio. Model is with small gaps. you will need a good printer. elements might stick slightly together, you might have to deblock. Versions Rotating long axe Rotating…

Tanfoglio LIMITED CUSTOM Pistol Grips Panels. Ukraine Coat of Arms

Designed for 2 colour printing. I only had close colours in PLA (Gold Silk and Prusa Azure Blue) When my PETG arrives, I will reprint! The model is derived from my design for CNC machined grip panels, which are commercial.

Prusa Bear Mod Upgrade Mk3 / Mk3s LCD cable clips

Remix from Martin_au https://www.prusaprinters.org/prints/1683/files A cable clip for the LCD cables for the Bear Mod upgrade. The Bear Mod sturdy frame upgrade for Prusa MK3S is a 2040 aluminum extrusion, so different sized LCD cable…

NO MORE CABLE TIES: cable clips for wiring (e.g. Prusa enclosure) / Nie wieder Kabelbinder: Kabelschellen zum verkabeln

Hello friends from all over the world :) This is my first 3D-model on printables. A friend of mine has the original Prusa enclosure for his mk3s+. With the air filtration system and the LED strip, there are a few wires to guide along…

Baby Monitor / Babyphone Betthalterung Hauck Reisebett-Halterung für Philips Avent SCD845/26

Eine alternative Babyphone Betthalterung für das Babyphone Philips Avent SCD845/26. Sollte die V.1. einen zu steilen Winkel haben kann diese an der ggü. Seite des Babybettes installiert werden. See also my other bed mounts:…

Peugeot 208-II foot mat clips

The clips of the footmat of my Peugot 208-II (2020+) are to small to hold the fabric. So I designed my own clips that are bigger so the mat wouldn't slide under the gas pedal. It fits my Peugeot 208-II (2020 version). Not sure if it will…

Oil filler cap dipstick for Eberth gas engine 5.5HP

Replacement cap for the oil filler of the motor. Made for an Eberth 5.5HP motor but may fit on other types of motors. ¾ in ANSI thread Printed on a Creality Ender 3 S1 using black PLA 1.7mm filament. I recommend to print in vertical…

Benzin Diesel Clips für 20l Kanister

Die Clips habe ich für Standard Benzinkanister 20l aus Kunststoff gezeichnet mit einem Griffdurchmesser von 30mm Es gibt 1/25 1/30 1/50 Benzin Diesel Den Filamentwechsel habe ich bei 1mm gemacht Für die kleinen 5l Kanister einfach auf 83%…

PC REAR EXHAUST VENT FOR PHANTEKS ECLIPSE P400 CASE

Redirect the airflow from your PC's rear exhaust fans upwards and away from the wall. The purpose is to expel hot air in a direction that prevents it from circulating back into the case through the lower slots. Originally designed for the…

Philips Sonicare Electric Toothbrush Holder

Freestanding or can be attached to a surface with mounting tape. Version 1a This is a fraction larger to fit the older Sonicare models (I did have a Sonicare HX8911/04 that I bought in 2017 that slightly bigger). Our newer Sonicare 4300s…

Phillips DreamStation CPAP/BiPAP Door Spring

The internal plastic spring breaks on the Phillips DreamStation BiPAP which causes the door latch for the water chamber to not stay latched. A few screws allows access to the old spring that can be completely removed and replaced with…

Conduit/Pipe Clips

A collection of conduit/pipe clips for the following sizes of conduit/pipe. Nominal outer diameter: 20mm, 25mm, 32mm, 42mm and 55mm. Maybe used for both rigid or flexible conduit. The clips may also be clipped to each other, side-by side,…

Philips Hue Dimmer for Busch Jaeger

This is an adapter plate for the Philips Hue Dimmer v2. It fits on Busch Jaeger wall switches using only the clip of the switch. It is a remix of https://www.thingiverse.com/thing:2905340 by Hoelle and…

Beard Trimmer Philips MG7720 holder

V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Držák na holící strojek Philips MG7720 s možností připojení nabíječky. Vytištěno s tryskou 0.6,…

socket holder for phillips head no1 to no4, 1/4" drive ratchet

Socket holder gridfinity bin for phillips head no1 to no4, 1/4" drive ratchet. The socket holder uses a gridfinity 1x2 bin. It's made for phillips screw drive no1, no2, no3 and no4. Print it with 10% gyroid infill, no support. You can…

Philips Norelco Multigroom Series 3000 Trimmer Holder / Dock

Supports: No Infill: 10% Rafts: Doesnt matter

Philips Hue Dimmer Switch (V2) Mount

Idea I wanted a way to mount the remote to my desk (built out of 4040 aluminium extrusions). Additional Components 1 Magnet 6x3mm (but up to a length of 6mm should be fine) To Mount: 2 screws M5 button head (ISO 7380) Maybe some glue to…

Chihiros WRGB II DIY shade clips

I used these corrugated plastic sheets and cut them to size to use as light blockers for my Chihiros WRGBII https://www.michaels.com/product/plastic-corrugated-board-by-creatology-M10567770 The clips just slot into the light and hold the…

Clips pour plinthes / clips for baseboards

Clips pour plinthes / clips for baseboards Réalisé chez Hephaprint www.hephaprint.fr

Mounting bracket for Philips Hue LED light strip

Made this because the adhesive doesn't stick well to some surfaces such as the finish under my kitchen cabinets. Using screws, you can attach the light strip tightly. I recommend #4 flat head screws.

PHILIPS SpeedPro (FC6823) parts

Replacement parts for SpeedPro

Philips OneBlade Travel-box with stand

Philips OneBlade Travel-box with stand A small box with a lid where the accessories are stored. https://amzn.eu/d/ivvry3F

Holder for hair clips

I have a whole bunch of hair clips and wanted to make a more efficient way to store them. Originally designed to fit the standard claw clip you see a lot nowadays but since my printer is small, they don't fit. Currently making a part 2 to…

Soldering buddy for LED Strips and/or wires

Get ready to meet your new best friend for soldering LED strips and/or wires! I had to find a suitable sidekick for my upcoming soldering marathon, so I printed and tested two models that seemed promising. But alas, they were too…

Rail for storing spare filament clips

A simple print: it just sits on top of the printer frame and gives a handy place to store spare filament clips. I was finding they ended up in a pile under the printer and wanted somewhere to put them. I've placed it facing backwards (so…

Philips Multigroom 3000 minimal case

This minimal case protects the Philips Multigroom 3000 (MG3750/60) from accidental activation and covers the blade, clicking securely into place. It’s especially useful when travelling, keeping your trimmer safe without adding bulk. The…

Philips Hue E27 compatible diffuser/lampshade | Philips Hue E27 kompatibler Diffusor/Lampenschirm

This is a diffuser that can be used to evenly distribute the light from Philips Hue E27 LED bulbs. Other light sources may also fit inside. I originally made the diffuser for a triangular lampshade , but it also works as a stand-alone…

Samsung Fridge Glass Clips

Replica of a clip used in some Samsung fridges. OEM Part #: DA61-04809A A brim is suggested if running off multiples.

Glasslock Food Storage Lid Clips

The clips on Glasslock lids break off after a while, as all “ living hinge ” designs eventually will. Rather than throw away the lid, use these replacement clips. I have two clips here. One for square or rectangular containers, and one…

Solar Panel Wire Clips

This is a simple clip for tying your solar wire neatly together. I made these to route the wire down my RV roof where I am putting my solar panels.

Philips Sonicare Stand Remix

EN : Holder for Philips toothbrush with elimination of the stability problem of the brush head support. Material : PLA Layers : 0.1 - 0.2 (0.1 looks better) Supports : no See also:…

Wall mount for Philips Avent SCD923/26

The diameter of the retaining circle is 70.82mm. The fixing holes are 5mm. In the photos I fixed the support temporarily with Patafix / Blu-Tack Print in PLA, 0,15mm, with support

Quick Clean Pod Cartridge for Philips Shavers

Introduction This is a replacement cartridge for the Philips Cleaning Pod model AC52/01 . It is not a copy of the original cartridges, but is designed to be fully compatible with the original Cleaning Pod, and optimized for easy 3D…

Clips for Roland Piano Stand, Cable Holder

I made this for a Roland FP-E50 digital piano with the KSFE50 stand. Keeps cables and power brick hidden behind the crossbar of the stand. Can probably be used with other piano stands, crossbar is 15 mm thick. There is a also a holder for…

Philips Hue Festavia string lights Fence Clip

I made this model to secure our Philips Hue Festavia string lights to the top of our terrace fence. The top of the fence has the following dimensions: H: 4 cm (1.5748 in), W: 2.9 cm (1.14173 in). The fence also has a small 2mm indentation…

ChIPs - polycube construction set

ChIPs ( Ch oon way's I nterlocking P anel s ) With only four different types of panels you can build any kind of polycube you wish. Including tables. The panels connect to each other using bumps and indents on the contact faces on the…

nintendo switch procontroller grips

grips for the nintendoswitch procontroller, 3D scanned and smoothend

Intel X540 10GbE Network Card Chipset 50mm Fan Adapter Bracket

Many forum posts about issues, where the AD3212KB-K71 fans on actively cooled Intel X540 cards are loud and/or unreliable. For my X540 cards, I designed this adapter to swap out the loud little fans with quieter 50mm fans. The bracket is…

Philips beard trimmer 9000 Prestige BT9810/15 Stand

The Philips beardtrimmer BT9810/15 is a premium device but lacks one important feature - a stand! So when there is no thing I have to design and print it. With this design you get a stand for securely storing your BT9810/15. And you get a…

Philips Avent Babycam/Babyphone Holder

This a Babyphone Camera Holder for the Philips Avent (Modell SCD923/26). It can be used to store the babycamand a powerbank, which can be used to power the babycam. Dimensions: Theoretically it can fit any babycam with a stand of 70mm.…

Philips FM1000 Power Connector

This power connector has been designed to fit the FM1000 series of VHF transceivers. This was a request from the Aberdeen Amateur Radio Society (www.aars.org.uk). The power connectors for these radios are very rare and hard to find, and…

EGGER Fastening clips

You can easily attach the skirting boards to the wall.

Philips Hue Dimmer Switch Fix

The old Philips Hue dimmer switch has a design flaw causing it to break and the battery not sitting tight. This part replaces the broken thin piece of plastic that hold the battery cover tight. It's a very small part, don't use old…

Knight Paper Clips

Knight paper clips for fun office. Printing from PLA, without supports, layer height 0.2 mm. Adjust the height as you need.

Zip tie cable mount (glued i.e. power strips or double sided tape)

Simple zip tie cable mount to use with double sided tape or power strips to fixate cables.

Rackmount for a Philips Hue Bridge to mount it in a 2U 19" Modular Rack

Rackmount for a Philips Hue Bridge to mount it in a 2U 19" Modular Rack Printed without any Supports For The Rack you can Buy the Metal one here:…

FCK AFD NO AFD FCK NZS Einkaufswagenchips

Original Prusa Enclosure (OPE) - Cable Managemet Clips for Under the Enclosure

Fastening cables with ties inside the enclosure is impractical for maintenance. It also makes less sense to pull all cables through the enclosure if the cable is only connected to components outside. This clip allows you to place the…

Clips pour Connecteurs ARGB/RGB

J'ai conçu des clips de 30 mm de longueur spécialement pour accueillir les connecteurs ARGB/RGB, garantissant une fixation sécurisée et fiable lors de vos montages. Grâce à leur conception innovante, ces clips ne nécessitent aucun support…

NorLyx Gun safe (vapenskåp) Barrel Rest (pipstöd)

add something later here =)

Paddle Clips for 1 itiwit paddle

Paddle Clips for 1 itiwit paddle. The stl includes 2 clips. The 3mf file is for PETG and a .8mm nozzle.

North American XB-70 Valkyrie Aircraft Kit Card with Compliant Folding Wingtips

Print your own 1:516 scale model of the XB-70 Valkyrie, one of the most ambitious bombers ever built! Designed to fly at Mach 3 while soaring at 70,000 feet, the XB-70 featured a sleek delta-wing shape and innovative folding wingtips to…

Webcam Arm Screwless with Cable Clips

Webcam Arm for Logitech C920/C922 (should work with any cam with standard camera screw hole, hooks into the Prusa aluminium frame, no screws needed. Added camera clips and a short ¼" screw and washers, you only need a cam and 35g of PLA.…

Wall / Door hook / hanger (Power Strips normal size)

Printed in PETG 0,35 (fast), 4 perimeters anf 50% infill.

Philips Sonicare Teethbrush Stand

EN : With reference to my remix of the great model by Wollel I had the idea of reworking this remix for some time, as the plate could benefit from some additional stability in the long term. The competition brought this idea back to my…

Lipstick Keychain

I wanted to make my friend who loves makeup, a souvenir. I prefer it without the cap but I uploaded it too if you want. I recommend you to resize it for your personal preference.

Oil dipstick Triumph Speed Triple 515NV (2011-2016)

I don't like the screw-in version of my Triumph, so I made a stick-in one. And in white it's much better to see the oil on it. The length of the original depends a bit because of the o-ring, but I'm sure the printed one is well within…

Pen holder for wall mounting with power strips.

Pen holder for wall mounting with power strips. Extra space to detach. For 4 pens. We use it to label our annual calendar.Size for original power strips. For loosening from below with needle-nosed pliers, for example.

Obal na labelo / rtěnku - Cover for lipstick and labelo

Obal na labelo / rtěnku. Cover for lipstick or labelo.

Transmission dipstick lock for Mopar 904/727

Transmission dipstick on my Dodge Van keeps falling off so I tried designing lock tab to hold it in place. Fits on ¾" diameter dipstick tube Mopar 904/727 transmissions. 2 piece design - glue together. Consider printing in high temp…

Tom's 3DBenchy rudder stand V2 (12 ships)

Jolly #3DBenchy ⚓ is one of the most popular benchmarking models for 3D printing until these day. But if you have whole fleet, handy stand will be useful. This model is from 2016, but I hope you will like to have it here as it's as…

Furniture Foot Clips for Robot Vacuum Protection

Prevent your robot vacuum from driving over low furniture feet with these simple and effective clips. Designed to securely hold furniture feet in place, these clips provide a barrier that keeps your robot vacuum from getting stuck. Ensure…