Search results: jb

Sort order

Counting matching models…

P
Printablessescobar

JBL Flip 3 Speaker Feet

Quick and easy feet for JBL Flip 3 If you have one of these speakers, you're probably familiar with their annoying, cylindrical nature. These feet are my solution to their cylindricality. ( Is that a word? ) The feet clip onto the speaker…

Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant

Downloads
231
Likes
30
Rating
5
P

jbl go 3 holder

a holder to hang your jbl go 3 box in the shower. If you like it I would appreciate it if you give it a like. when you have printed it make sure you put a photo in "make". do you have any questions or comments? then put them in the…

Print approx. €3.44–€4.21 excl. taxPreliminary estimate for one variant

Downloads
105
Likes
33
Rating
0
P
Printablesfluetke

Gridfinity 2k Epoxy/JB-Weld storage

Stores 2k epoxy syringe + spatula for mixing + mixing area in front. Size is 5x1x4.

Print approx. €5.21–€6.37 excl. taxPreliminary estimate for one variant

Downloads
57
Likes
5
Rating
0
P
PrintablesNo Limt

Protection cap JBL Xtreme 2 Schutzkappe

A protective cap that slides over the speaker and holds securely. Printed in PLA Eine Schutzkappe, die über den Lautsprecher gleitet und sicher hält. Gedruckt in PLA My other prints:…

Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
3
Rating
0
P
PrintablesNicias

JBL Xtreme 2 Stand – Elegant & Compact 3D Printable Speaker Holder

English JBL Xtreme 2 Stand – Elegant & Compact 3D Printable Speaker Holder Looking for the perfect way to showcase your JBL Xtreme 2 speaker at home? This stylish, 3D printable stand is custom-designed for the JBL Xtreme 2 and offers a…

Print approx. €9.70–€11.85 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
2
Rating
0
P
PrintablesCień04

Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
1
Rating
0

JBOD Enclosure 3D – Multi-HDD Case for NAS Expansion

🧰 JBOD Enclosure 3D – Multi-HDD Case for NAS Expansion This is a JBOD enclosure (Just a Bunch Of Disks), designed for DIY NAS projects like Proxmox , TrueNAS , Unraid , or even Raspberry Pi setups using SATA HBA or port multipliers.…

Print approx. €5.23–€6.39 excl. taxPreliminary estimate for one variant

Likes
9
Rating
0
P
PrintablesMarekst

JBL Holder

This is a 3D-printed stand designed for cylindrical JBL speakers like the Flip or Charge series. It provides improved stability, clean, modern look. The open-frame design minimizes material use while keeping the speaker securely in place.…

Downloads
1,212
Likes
355
Rating
5
P
PrintablesCaracolmaker

Repuesto Cascos JBL TUNE510BT

Hoy os dejo una reparación de unos cascos bluetooth JBL TUNE 510BT de mi hija. Para arreglarlos hay que desoldar algunos cables como comento en el video.

Downloads
1,100
Likes
78
Rating
5
P
PrintablesSpheroidon

Stone Mask (JJBA)

Model of the Stone Mask from Jojo's Bizarre Adventure

Downloads
925
Likes
119
Rating
5
P
PrintablesTituszTutisz

JBL Wave Buds - Lid

Simple lid for JBL Wave Buds Easy to remove, you can shake off the lid when it's upside down.

Downloads
789
Likes
36
Rating
4.67
P
PrintablesDGA

JBL Tune 500 BT headphones case

Simple transport case for JBL Tune 500BT headphones. For hinge pin I used a piece of filament. Material: PLA Nosupport Layer high: 0,3 or lower

Downloads
671
Likes
97
Rating
4.86
P
Printablesseb.B

JBL Charge 5 Clip Case

This case protects the speaker and also allows you to attach a strap with the two holes at each end. You can use the shoulder strap from the Xtreme model with the case for easier portability. Parts you will need: 8x M3 Bolts 8x M3 Button…

Downloads
657
Likes
102
Rating
5
P
Printablesil_Papero

JBL logo

JBL logo for 3d print

Downloads
625
Likes
20
Rating
0
P
PrintablesSteveW91

Lid for JBL Wave 100 TWS

A simple lid to keep dust out of the case of JBL Wave 100 TWS.

Downloads
567
Likes
38
Rating
5
P
PrintablesJoshCraft3D

JB Minimalist Wallet

This is my first minimalist lever wallet I designed. I wanted a wallet that would be small enough for my front pocket, but still have some storage area for cash or other cards. Other Required Materials That I Used: Screws -…

Downloads
509
Likes
182
Rating
5
P
Printableskeita99
Downloads
507
Likes
45
Rating
0
P
PrintablesMade By Dennis

45 disk JBOD (sheet metal + 3d printed)

This is a DIY enclosure designed to be used as a 45 disk JBOD to add to a NAS. It is rack mountable and is built from 3d printed and sheet metal parts. For general information on part sourcing and how to assemble things, refer to this…

Downloads
474
Likes
83
Rating
0
P
PrintablesHeikit

JBL Partybox 320 Microphone Holder - JBL Partybox 320 Mikrofon Halterung

I recommend printing it in PETG The first version closes relatively flat at the top (e.g. if the party box is to be pushed under a table), the second version “mic higher” places the microphones higher. It would be nice if you post your…

Downloads
465
Likes
31
Rating
5
P
PrintablesUnrea1

JBL Charge 5 - 3D Scan

🌀 Step into the realm of raw creativity with this enigmatic 3D scan - a rustic rendition of the JBL Charge 5 birthed from the mysterious Einstar 3D Scanner! Unapologetically unpolished, its rugged charm beckons you to embark on a…

Downloads
456
Likes
33
Rating
0

JBL Charge 3 battery cover (upgrade)

UPGRADE JBL Charge 3 battery cover with support for rubber part. Gasket for this cover is here: https://www.printables.com/cs/model/453487-gasket-for-jbl-charge-3-battery-cover-not-for-orig

Downloads
443
Likes
7
Rating
5
P
Printablesmigsun

screwless HDD/SSD enclosure / Mini JBOD

screwless enclosure for one or two HDD/SSD single and double version available

Downloads
439
Likes
49
Rating
5
P
PrintablesJhonas

Two Trees Bluer JB Direct Drive Mod

Hello, this is a project that i am working since my bowden coupler failed, i remembered why i hate bowden setups, actually i hate the couplers. So, i designed a direct drive mount that is compatible with my cooling solution to upgrade my…

Downloads
421
Likes
33
Rating
5
P
PrintablesLomax1983

SKADIS JBL GO 3 holder

Skadis JBL GO3 holder. Supports are required for the mounting section that attaches to the Skadis board.

Downloads
406
Likes
23
Rating
0
P
PrintablesPPostma

JBL Charge 5 Skadis Mount Hook

Skadis mount for a JBL Charge 5. Does have a 90mm space for the speaker. May fit other speakers. Hooks have a tight fit.

Downloads
396
Likes
71
Rating
4.71
P
PrintablesMazzPrint

JBL Flip Stand

A simple and easy to print JBL Flip speaker stand.

Downloads
393
Likes
42
Rating
5
P
PrintablesCade Wierck

JBL Charge 4 Wall Mount

JBL Charge 4 Wall Mount. Mount your speaker in your room, Garage, and also office.

Downloads
392
Likes
44
Rating
4.5
P
PrintablesSamuel Panák

JBL Tune 670NC Headphones Case

Edited case from DGA to fit JBL Tune 670NC headphones. Case is resized to fit 670NC model and added logo on top. In case is removable cable case from desordenado , cable case is resized and hook is removed. I added padding to prevent from…

Downloads
392
Likes
28
Rating
5
P
PrintablesNicanor Salcedo

Logo JBL

Archivo STL para imprimir

Downloads
385
Likes
20
Rating
5
P
PrintablesKatona Edvard

JBL Charge 5 case

Printed parts : charge 5 case band x4; charge 5 case handle x1; charge 5 case side x2. Screws: m3 x10 ;m4 x6. Nuts : m3 x10.

Downloads
384
Likes
51
Rating
4.3
P
PrintablesD Tibor

Bumper case frame for JBL GO 2 to use with carabineer to clip on a hiking backpack bag

The title says it all! I have made a hanging frame for my old JBL GO2. Ideal for hiking trips and mountain bike rides. I have printed with ABS that shrinks quite a lot. The model is 0.2-0.3 mm larger than the speaker itself. Even like…

Downloads
381
Likes
82
Rating
5
P
PrintablesLeon_H

JBL Charge 5 / Charge 4 / Charge 3 Mount

A simple under desk mount for the JBL Charge 3. It is intentionally designed in one piece so that the distance and angle of the two brackets is correct right away. You will need supports if you want to print everything in one piece (you…

Downloads
364
Likes
37
Rating
0
P
PrintablesBroden

Jimny JB74 Rear Window Antifog Cable Cover

Should be printed in ABS or ASA as otherwise PLA or PETG will warp in heat. Fits on with some double sided tape

Downloads
358
Likes
22
Rating
0
P
PrintablesNeybao

JBL wave buds 2 travel case

Printing Material: PETG for a more reliable snap latch and its better for outdoor use. Seam: exclude the seam away from the front, looks better. Assembly Its uses a filament hinge that can be pressed in and use Flush wire cutters to cut…

Downloads
341
Likes
12
Rating
4.5

GJB Test Cube

I made this test cube and additional prints for my nozzle testing video:

Downloads
333
Likes
40
Rating
5
P
PrintablesJhonas

JB Notebook Stand

Just a notebook stand i designed. Made to work with my 15.6" notebook,but should work with others. BOM: 4x silicone feet 4x M3 Screws 4x M3 nuts Print instructions Category: Computer Summary Just a notebook stand i designed. Made to work…

Downloads
327
Likes
47
Rating
5
P
PrintablesCamRodandChief

JBL Flip 4 Shower Holder

Thanks @Adastorm, very cool idea with the JBL Flip 3 shower holder. I modified it for the JBL Flip 4 and added a cross beam. The print is broken up into 3 parts for easy printing and to eliminate the need for supports. I used DAP Rapid…

Downloads
322
Likes
56
Rating
5
P
PrintablesAndy D

Suzuki Jimny (2019+ / JB74 3-door) Dash Mount for Quad Lock

Please read the following warning before downloading: This print could pose a hazard in an accident. It introduces a hard-plastic object into an area where you or your passengers may come into contact during adverse events. My Jimny has…

Downloads
309
Likes
33
Rating
0
P
PrintablesChyzioslaff

Stand JBL Clip 4

New type of stand for very popular JBL Clip 4 BT Speaker. Printer: Mk3S+ Material : Noctuo PetG Orange Layer: 0,25 Time: 2h 35min Support: No

Downloads
307
Likes
21
Rating
5
P
PrintablesZeeKay

Mixing Nozzle for JB Weld Clearweld 14ml

This is a remix of the mixing nozzle by @drho1337 to be compatible with the 14ml J-B Weld Clearweld Epoxy part number 50114. The ‘EZ Mixer' that comes with it is not available to purchase extras for. Optimized for fast printing with a…

Downloads
288
Likes
39
Rating
5
P
PrintablesJan Štech

JBL Cover

You can print the cover with a color change during printing to get a nice look. The cover is designed for my JBL Flip Essential but should fit all JBL Flip speakers. The cover simply snaps into place.

Downloads
275
Likes
44
Rating
5
P
PrintablesTom-South

JBL Flip 6 Bike Mount

This is a JBL Flip 6 speaker mount for you bike.

Downloads
264
Likes
29
Rating
0
P
PrintablespHiLViO

JBL Flib Glass Shower Rack

V2 is more efficient for water evacuation.

Downloads
263
Likes
128
Rating
5
P
Printablesittenomis

JBL Headphone Stand

This headphone stand is heavily inspired by JGR's Headphone stand model, but doesn't use its files as a base for this model. Its been recreated from the ground up. (IMHO) It improves on the original model on a few key features, that I…

Downloads
260
Likes
16
Rating
4
P
PrintablesTh3s3ous

JBL clip 4 stand

Model uploaded from Thingiverse. I think is great sollution so I am sharing it here.

Downloads
254
Likes
24
Rating
5
P
PrintablesDGA

JBL Tune 500BT headphone travel case

This is remix of my previous case. I changed locking from snap lock to latch lock. M3x30 screw and nut is fot the lid and latch mechanism. M3x25 is for lid hinge. Lid hinge should be tapped M3 thread before assembly. ( It is not…

Downloads
252
Likes
47
Rating
5
P
PrintablesTheLivingBubba

JBL CLIP 4 Stand / hook

The JBL Clip 4 is nice, but the hook can suck sometimes and the speaker doesn't sit flat. This little stand helps let the speaker stand in a few positions and it can fit/store over the JBL hook.

Downloads
251
Likes
21
Rating
4.5
P
PrintablesLeokaldzik

Bicycle holder for the JBL GO 2 speaker | JBL speaker mount

!!! To avoid scratching the frame, it is best to line the center with something soft (old handlebar tape, bicycle inner tube). !!! Maximum pipe width 40mm, height depends on the screws used (you can print) Sample link:…

Downloads
251
Likes
93
Rating
4
P
Printablesharish2094

JBL FLIP SERIES SPEAKER HOLDER

Holder to protect the speaker from dust and rolling down. Improved aesthetics without effecting the functionality.

Downloads
250
Likes
52
Rating
5
P
PrintablesF3L1X

JBL PartyBox 310 feet

Small rubber feet for the JBL PartyBox310 Can be printed in TPU to be similar to the original ones. I have printed them in PLA, also works fine.

Downloads
248
Likes
17
Rating
4.5
P
PrintablesAdam

JBL Charge 5 case

Standard case without feet for JBL Charge 5 and with side protection and reinforcements. Screws needed for assembly: 6xM4 8xM3 with nuts (use glue to hold nuts in right place) Print options: Print with PLA or PetG with layer height 0.2mm…

Downloads
247
Likes
41
Rating
3

JBL Wave Buds 2 Travel Case Remix

I liked the original model by Neybao, but the power port on my buds case was quite a bit lower (almost 5 mm!) than the port on the original model. So, I had to widen that a little to make room for what I gues is a factory change in the…

Downloads
246
Likes
9
Rating
5
P
PrintablesHidde3D

JBL Flip 5 Wall Mount with Hooks

A wall mount with hooks

Downloads
241
Likes
57
Rating
5
P
PrintablesKajasX

JBL Wireless microphone holder with 3/8 thread

I was looking for a holder for JBL wireless microphones. These mics are thick, so I had to draw my own mount. The print consists of two parts and they are connected by an M6 screw. I printed the holder from TPU and the other part, in…

Downloads
240
Likes
7
Rating
0
P
Printablesmelvinfec

JBL FLIP 3 HOLDER

A nice holder for your bluetoothspeaker

Downloads
238
Likes
31
Rating
0
P
Printablesthe constructor

JBL Bar 1000 rear speaker wall mount

Rear speaker wall mount for the JBL BAR 1000. Should also fit for similar JBL BAR models. You need for one wall mount assy: 3x M5x16 screw (cylinder head screw, pan head screw,…) 3x M5 washer 3x Insert nut (ruthex) I printed the wall…

Downloads
237
Likes
16
Rating
5
P
PrintablesChnauel

JBL GO 2 Holder

I made this holder for my shower. It hold the JBL GO 2 Speaker (Waterproof). The mountening was made with double faced tape. I hope someone can use it or inspire it for further ideas. Print instructions No Support I used PETG.

Downloads
236
Likes
43
Rating
5
P
Printables3Dimensions

Rugged JBL Flip case

Rugged box with holder for JBL Flip. I have an JBL Flip Essential 2 Bluetooth Speaker. For save transportation i needed an strong case so i merged the rugged box form Whity and the JBL Flip Holder from melvinfec. The case should also work…

Downloads
236
Likes
71
Rating
4.67
P
PrintablesMAM3D

JBL Charger 3 wall mount

This model allows you to mount the JBL Charger 3 directly to the wall. It was designed so that the buttons can be operated from the front and the flap on the back is freely accessible. Only the holes on the bottom must be printed by means…

Downloads
235
Likes
32
Rating
5
P
PrintablesSimon Jolmers

JBL partybox 310 microphone holder.

A click-on microphone holder for JBL wireless microphones to be easily carried together with your JBL Partybox 310. No support nor brim needed when printed on a side. made with tinkercad.

Downloads
232
Likes
16
Rating
5
P
PrintablesKeen

Jbl Tune Beam case mount

This is JBL Tune Beam EarPods mount bracket, just print it in PLA Now you don't have to look out everywhere in your area

Downloads
225
Likes
27
Rating
5
P

JBL GO Mount

Created a mount for my JBL GO to hang on the wall next to my Ipad. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: High Infill: 20% Notes: K Camel PLA 213°C Category: Audio

Downloads
221
Likes
47
Rating
5
P
PrintablesHanilla

Gritfinity box for JBC Soldering Tip C245 and C210

This 3x1x2 Gridfinity-compatible box is designed to hold up to four JBC C245 or six JBC C210 soldering tips. Each tip rests in a slot with a bit of lengthwise wiggle room—enough to allow for easy insertion and removal without forcing a…

Downloads
217
Likes
24
Rating
5
P
Printableschelas

JBL CHARGE 4 STAND

Its a stand for your JBL CHARGE 4, don't need any support to print. Stand for JBL Charge 4. I printed with an Creality K1 MAX with a 0.4 mm nozzle and texture plate. Material: Black Matte PLA with a layer height of 0,20 mm. Printing time:…

Downloads
216
Likes
45
Rating
5
P
PrintablesWilfred

JBL Charge stand

My daughter wanted a Stand for her JBL Charge4. I found this one on thingiverse but is was for a smaller one. I scaled it up a bit to fit hers. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…

Downloads
211
Likes
35
Rating
0

HSW JBL CHARGE 5 SUPPORT

HSW for JBL CHARGE 5

Downloads
211
Likes
44
Rating
0
P
PrintablesKrayzzee

Wall mount JBL xtreme 2

I tried to make the mount as hidden as possible. I have also included an .stl file to help determine the spacing of the holes. The helper only takes around 2g of filament.

Downloads
208
Likes
20
Rating
4.5
P
Printablesluczjanoo

JBC Soldering Iron Tips and Tweezers Storage Box for 11+8 pcs.

This is my second project of JBC Soldering Iron Tips Storage Box for 11 tips and 8 tweezers. You can easy attach it to your JBC Soldering Station by M4 screw at the left side. If you want to attach it to right side - just print in mirror.

Downloads
200
Likes
22
Rating
5
P
PrintablesKilianBLRD

Skadis JBL Flip Stand

I made a stand for my JBL Flip 4 for my skadis pegboard

Downloads
200
Likes
27
Rating
5

JBL Speaker Box

Those JBL speakers are great for those boxes. They are not “flat”, as in Studio Monitors flat. There's a picture that shows the EQ from my AKG headphones (the left image) to the boxes (the right image). I captured using a Sure Pro mic, so…

Downloads
196
Likes
28
Rating
0
P
PrintablesDStehlik

JBL FLIPer 1.0

Magnetic or Fix Holder for bluetooth speaker: JBL FLIP 5 accessories: neodymium magnets: 15 x 3 mm - 6 Pcs OR 2 Pcs Screw Pattern https://spartanmounts.com/products/jbl-flip-4-speaker-mount

Downloads
194
Likes
31
Rating
5
P
PrintablesJirka

HSW JBL Flip 3 holder

JBL Flip 3 holder. So you can hang the music to your honeycomb wall. You shall use at least 2 of them. I don't own any other JBL devices to try compatibility with others. Inner diameter of hang is 65mm. Enjoy

Downloads
192
Likes
42
Rating
5
P
Printablesyetanmaykere

JBL Tune 7XX ear cup fork

This part is designed to replace the RIGHT ear cup fork mount on JBL Tune 7XX series headphones - made for and tested on JBL Tune 770NC but it will fit several other models with similar cup forks. It can be used for the left side as well…

Downloads
188
Likes
13
Rating
4
P
PrintablesmitasBR

JBL Xtreme shelf support

I developed a simple support to leave my JBL Xtreme suspended on my 15mm shelf, it was useful to reduce the space on the table and leaves the box in a good area to listen to music while I work. Also added the f3d file so you can edit in…

Downloads
187
Likes
97
Rating
0
P
PrintablesCNC Kitchen

Case for C245 / T245 Heat-Set Inserts Soldering Iron Tips (e.g. JBC)

3D Printable case for the CNC Kitchen C245 Heat Set Insert Soldering Iron Tips compatible with, for example, JBC Tools stands (ADS, CTS) and soldering stations such as the YIHUA 982, Quicko T245, KSGER T245 or Sequre T245. Fits the Insert…

Downloads
187
Likes
32
Rating
4.8
P
PrintablespHiLViO

JBL Charge 4 Glass Shower Rack

Mostly resumed in Model name :)

Downloads
187
Likes
48
Rating
5
P
PrintablesT3CHKOMMIE

Smart Fortwo 453 Front Door Speaker Bracket - JBL GT0-629

I didn't want to use the crappy ABS mount for the original speakers. New speakers were a bit big for the original so I made these. I wanted to preserve the original harness connector to make install easy. Looks and sounds great. Should…

Downloads
186
Likes
9
Rating
0
P
PrintablesArie Kanarie

JBL Flip 3 mount/holder

This is an holder for the JBL Flip 3. This holder makes it less prone to rolling so it won't fall off your table anymore. There are recessed holes that can accomodate both countersunk screws and also round ones. I have one mounted on my…

Downloads
184
Likes
21
Rating
5
P
PrintablesAfroPsycho

JBL Go 2 Case

This is a case for JBL Go 2 Whit this case you are able to carry it around just like JBL Clip 3 There is also a extra part which acts like swivel so when you attach something like carabiner it can turn 360 freely If you love my work,…

Downloads
183
Likes
26
Rating
5
P
PrintablesCEJ Ing

JBL Flip mount

JBL Flip mount Mounted with 4 screws. The two strips needs to be printed with TPU. Base, left and right side are glued together.

Downloads
181
Likes
24
Rating
5
P
PrintablesJeremy3llis

Speaker Bike mount for JBL Clip 3

This is a remix of the bike mount designed by r/canadaornot. his design was good, but was hard to print cleanly without support. It fits the JBL clip 3 to your handlebars for safe listening while riding your bike. You will need to buy a…

Downloads
180
Likes
29
Rating
0
P
Printables2wenty2wo

Multiboard - JBL Charge 5 Multiconnect Mount

This is to mount a JBL Charge 5 (and possibly other JBLs) to your Multiboard wall. You need to print 2x Brackets & 4x Multiconnect Big Thread Connectors. It uses the Multiconnect system and requires the Big Thread Connector found here:…

Downloads
179
Likes
36
Rating
5
P
PrintablesTheProjectWheel

JBOD v2 - Hard Drive Enclosure for 16 Drives (JBOD/HBA)

Please comment, rate, and post a make! I ran out of physical space to add more hard drives to my home server. Given that I already had a few parts laying around, I didn't want to spend several hundred dollars on a prebuilt enclosure. So,…

Downloads
176
Likes
58
Rating
5
P
PrintablesJeffey Lawler

JBL Flip 6 Bike Mount

I designed this to fit most bike frames and logo as well as controls are all accessible from the outside. The controls and logo line up with the windows. It is a pretty snug fit but just in case there is a lid for the case. I out two…

Downloads
173
Likes
18
Rating
3
P
Printablesthrutheframe

JBL GO3 bracket with multiple mounting options

I bought a JBL GO3 Bluetooth speaker for my worktable to play music from my laptop while working. Did not want it to be sitting on the tabletop with all my tools, so I designed a bracket that I can use the 3M command tapes and mount to…

Downloads
173
Likes
25
Rating
4.5
P
Printablesmobbarley

Suzuki Jimny Rear Speaker Adapter JB74 Suit Pioneer 6.5" TS-G1620F-2

A remix of GWA's well designed bracket to better fit the Pioneer TS-G1620F-2 6.5" speakers. This bracket is used to fit speakers in the rear of a 3-door JB74 Suzuki Jimny. Includes simple TPU gasket model.

Downloads
172
Likes
20
Rating
0
P
Printablesyetanmaykere

JBL Tune 7XX swivel joint

This part is designed to replace the RIGHT swivel joint on JBL Tune 7XX series headphones - made for and tested on JBLTune 770NC but it will fit several other models with similar cup forks. It can be used for the left side as well by…

Downloads
167
Likes
11
Rating
0
P
Printablesdgk675

Lumenier QAV-S JB Edition Walksnail Antenna Mount

Converting my QAV-S JB to Walksnail Avatar, I wasn't able to find a dual antenna mount, so I decided to quickly put one together. I printed the part with 100% infill and 100% part cooling to, so the steep overhang prints properly. Make…

Downloads
167
Likes
11
Rating
0
P
PrintablesSelqcir

Support JBL Flip6

Support JBL Flip 6

Downloads
166
Likes
18
Rating
0
P
PrintablesNewha

JBL GO 3 bracket/holder

JBL GO 3 bracket/holder made for electric scooter mounting

Downloads
165
Likes
31
Rating
5
P
PrintablesJakub Straka

Speaker protector for JBL Charge 5 Case

Ochranná mřížka jako doplněk, pro ochranu reproduktoru

Downloads
163
Likes
27
Rating
5
P
Printablesil_Papero

JBL flip 6 usb-c protector (waterproof)

I washed my JBL Flip 6 once, it didn't charge for a whole day because the water had entered the USB-C port, I created this simple cap (to be printed in TPU) in such a way as to make it totally waterproof

Downloads
161
Likes
23
Rating
0
P
Printablesluczjanoo

JBC Soldering Iron Tips and Tweezers Storage Box for 11+8 pcs. v1.1

This is my updated (JBC Logo and some filets) project of JBC Soldering Iron Tips Storage Box for 11 tips and 8 tweezers. You can easy attach it to your JBC Soldering Station by M4 screw at the left side. If you want to attach it to right…

Downloads
161
Likes
44
Rating
5
P
PrintablesOschwald

JBL Go 4 Box/Holder

Einfacher Halter für die JBL Go 4 Box. Kann mithilfe der 4 Bohrungen an etwas angeschraubt werden.

Downloads
155
Likes
12
Rating
5
P
PrintablesAg_st

JBL Flip 6 monitor vesa mount holder

For this model to work you need to have your monitor mounted on a vesa mount arm. Print settings: Bed adhesion: skirt Supports: No Walls: 6 Infill: 20% (Preferably grid) PLA/PETG *.blend file included for edits to the arm length *Two of…

Downloads
152
Likes
20
Rating
0
P
PrintablesTheProjectWheel

Hard Drive Enclosure for 16 Drives (JBOD/HBA)

Please comment, rate, and post a make! I ran out of physical space to add more hard drives to my home server. Given that I already had a few parts laying around, I didn't want to spend several hundred dollars on a prebuilt enclosure. So,…

Downloads
151
Likes
35
Rating
0
P
PrintablesMilhause

Holder for Earbuds JBL Tune Flex Ghost

You can stick the holder with double-sided adhesive tape

Downloads
150
Likes
14
Rating
5
P
PrintablesSilson07
Downloads
150
Likes
14
Rating
0
P
PrintablesKodiak Cowboy

JBL Flip5 Speaker Wall Mount

Wall mount for JBL Flip5 Speaker. Very simple and can be printed without supports.

Downloads
147
Likes
37
Rating
0