Jugs sample pack
This is a 16 sample pack of screw-only jugs with their molds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors
- Downloads
- 769
- Likes
- 104
- Rating
- 5
29 models
This is a 16 sample pack of screw-only jugs with their molds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors
the handle must be printed 2-4% smaller to fit in prfectly or i just made them 100% both, trim iz down with knife and glue it together. my sugestion is to print them seperetly
This is a remix of a Tide and Gain jug/bottle detergent cup holder. Mine recently broke so I added some supports so it could be printed in PLA or any other filament than TPU. It didn't need supports. I printed it on my Elegoo Centuari…
I print one as is and one mirrored so the logos align for that nice see through effect. Fits 22mm hose, scale up to fit larger hose. Uses 3 cable ties, gives a nice 60 degree bend so you don't have to fight the hose so much when filling…
I decided to make a funnel compatible with Brita Maxtra, Aquaphor B25(B100-25 Maxfor) and other water filters. The funnel should fit 5-12L Water bottles from Bulgaria, with the adapter it should fit Big Water Jugs from the same region…
The intended jug is a tall 1 gallon container you would typically find in the US from big box stores like Walmart, Target, HEB, and etc. The threads may not perfectly fit every jug but it should still tighten. Print upside down with at…
Note: added PETg gcode. Meant to use PLA. Is what it is. The two gcode files are not single wall spiral. They are set up for 2 vertical walls. I wanted something a bit beefier. Four different versions for your 3D printing pleasure.…
Lid with a integrated netcup for use with Trader Joe's Apple Cider bottles (or other 40mm lid, twin threaded containers) Category: Outdoor & Garden
A vented threaded funnel for a European oil jug. Measure the threads on the jug, you should get either 45 mm (DIN 45 thread, also called KS 45) or 50 mm (DIN 50 thread, also called KS 50). The wall thickness of the funnel is typically 2.5…
My Scout troop has a bunch of old 3 gallon (12 liter) Reliance water jugs that have lost their caps over the years. Every 3d print replacement cap I have seen are for the modern, large spout jugs. This cap has been designed to fit the…
Just a quick and dirty print to hold some coffee machine jugs so they don't take up ALL the space in the fridge shelf. The left side holds a slightly larger jug to the right because that's what we have (90mm and 80mm jugs). It is not…
To complete these builds, you must have 2 caps from 4-Liter jugs of Dairyland brand milk. These storage/measurement tubes are designed for reusing the caps from 4-Liter jugs of Dairyland brand milk. The storage tubes are marked with…
To complete these builds, you must have 2 caps from 4-Liter jugs of Dairyland brand milk. These storage/measurement tubes are designed for reusing the caps from 4-Liter jugs of Dairyland brand milk. The storage tubes are marked with…
Bring organization and style to your home with this collection of customizable storage jugs! These versatile containers come in a range of sizes, perfect for storing everything from kitchen staples to craft supplies or toys. The clip-shut…
I have a few 5 gallon jugs for my water cooler, with no branding or meaningful labels on them, but they came with some screw-on caps. One of those caps is missing, and none of the 3D printable caps I could find were the right fit, so I…
To complete these builds, you must have 2 caps from 4-Liter jugs of Dairyland brand milk. These storage/measurement tubes are designed for reusing the caps from 4-Liter jugs of Dairyland brand milk. The storage tubes are marked with…
To complete these builds, you must have 2 caps from 4-Liter jugs of Dairyland brand milk. The storage tubes are marked with Imperial & Metric measurements. They also have a small marking inside, which indicates the half-full point.
TPU stopper for glass 3 gallon jugs. Seals well enough to invert a full jug without leaking but is still easy to remove. Printed at 0.2mm layer height with 4 walls, 5 bottom, 6 top and 10% gyroid infil with Amazon Basics 95a TPU. Link to…
To complete these builds, you must have 2 caps from 4-Liter jugs of Dairyland brand milk. The storage tubes are marked with Imperial & Metric measurements. They also have a small marking inside, which indicates the half-full point.
Jugs Lite-Flite Baseball & Softball Pitching Machine Cover replacement. For this pitching machine: https://jugssports.com/products/lite-flite-machine.html?srsltid=AfmBOorgNebSw38lsBRKwc4jdSc-XdDYA6TxcFuULqsSFSM-jFcYENg5 Printed from PETG,…
Variations of a small jug. Choose a model and scale it as you like. Need little or no support.
The three jugs allow the child to explore a range of experiences at bath time. All the jugs can just be pouring jugs if a hand or finger is blocking the outlet/s. The jugs with holes can have the effect stopped by placing a hand over the…
A replacement feed chute for the Jugs Sports Small-Ball Pitching Machine You can print in two pieces to fit within build volume (part is 290mm high). Supports needed for the top part. Print as vertical tube(s) at 0.2 layer height in PETG…
A compact WiFi scale that sits under a 5 L jug and tells Home Assistant how much liquid is left, in grams and in litres. I built five of them for the nutrient jugs (Micro / Grow / Bloom / pH Down / pH Up) of my hydroponic dosing station,…
WiFi scale that sits under a 5 L jug and shows the litres left on a 2.13" e-paper display, while sending mass and volume to Home Assistant. The display version of my nutrient-jug scale . Running under the nutrient jugs of my hydroponic…
Allows the Mighty Sink Electric Faucet to screw on to a 1 gallon Crystal Geyser water jug. Faucet Link: https://www.amazon.com/dp/B0F2Q477P9 I would screw it on the bottle first, then either make a mark or orient the faucet facing the way…
I used tinkercad to model some simple climbing holds. Unfortunately the banana jug is only 7 inches due to miss measurement on my end and so is the crimper with that banana jug. This project was made in the span of a few hours so…
This is a 16 sample pack of screw-only jugs with their molds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors
This is a remix of a Tide and Gain jug/bottle detergent cup holder. Mine recently broke so I added some supports so it could be printed in PLA or any other filament than TPU. It didn't need supports. I printed it on my Elegoo Centuari…