7,62x39 Kalashnikov ammo box
I got a request for a Kalashnikov ammo box. The spacing is 50pcs/11,80x57,215mm between the insert top and bottom. You gonna need 8pcs/M3x20mm for the Latch and Hinge. Hope you like it.
- Downloads
- 1,062
- Likes
- 110
- Rating
- 5
138 models
I got a request for a Kalashnikov ammo box. The spacing is 50pcs/11,80x57,215mm between the insert top and bottom. You gonna need 8pcs/M3x20mm for the Latch and Hinge. Hope you like it.
Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…
I designed this simple insert to change one of the shelfs of an Ikea Kalax shelf into a 10" rack. I printed it in ASA with 4 walls and 50% infill. You'll need M5 heated inserts and some M5 screws to mount the rails to the inserts. Every…
Explore this realistic 3D model of Dr. APJ Abdul Kalam, one of the most influential scientists and visionaries of the 21st century. Dr. Kalam, the former President of India, was a renowned aerospace scientist, widely recognized as the…
This is a pimped version of Kahla/Mancala with nice skulls for cups and brains for tokens. It can be printed on a small bed. Each skull is connected to its neighbor using clips. I also glued the back of the skulls to the opposite side to…
Introduction I like to keep everything in my gun safe tidy and make use of the otherwise unused wall space. Since the safe is lined with fabric, I designed a series of magnetic holders for magazines, firearms and accessories. Strong…
Model namiotu składanego dla samochodów rajdowych w skali 1/10. Namiot pomieści 2 samochody rajdowe w skali 1/10. Opis jak to zmontować znajduję się w pliku pdf “instrukcja”
I designed the IKEA KALAX drawer to be able to use the full depth of the KALAX shelf with DVDs or video games to save filament. To make the model fit on an MK3s or MK4, I subdivided it accordingly. The wreaths on the supports serve to…
This is the traditional African board game Kahala, Kalah or Mancala. Instructions can be found on Wikipedia: English: https://en.wikipedia.org/wiki/Kalah German: https://de.wikipedia.org/wiki/Kalaha It includes a case that can be used to…
UPDATES: [June 3rd, 2026] Part D - Upper Passenger Deck - has been updated with thicker walls and window mullions, along with additional interior detail. I have gotten some feedback regarding this piece and it being difficult to print due…
An ideal wall holder for the LiitoKala Lii-500 charger that will allow you to free up space on your desk. Simply print out the holder and place your charger(s) on the wall. The holder has 4 holes with a diameter of 3 mm in order to use…
“Old Thaidakar has always wanted my secrets.” -Kalak, from Rhythm of War by Brandon Sanderson This model is based upon the artwork of Magali Villenueve and others. Your Dummy-13 is feeling a bit paranoid and indecisive? Give them this…
Construction : Case include 5 different parts. All this parts 100% printable without any supports. Material: lock_liitokal_s2_x2, petlya_liitokal_s2_x2, top_liitokal_s2, bottom_liitokal_s2 were printed by PETG from ABG. liitokal_rubber -…
I designed this simple holder to attach my LiitoKala Li-600 battery charger to the stud of my Ikea Ivar shelf.
Wall bracket for battery charger LiitoKala Engineer Lii-500 Print instructions Printed without support
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
Simple flower pot with helix decor. Since the flowerpot is not waterproof, I designed a flowerpot to fit the IKEA KALAS cup (https://www.ikea.com/cz/cs/p/kalas-kelimek-ruzne-barvy-00461379/). Printed with PLA without any supports, two…
Halter für so gut wie jede gängige 1kg Filament Rolle, 2 Halter nebeneinander passen perfekt auf eine Ikea Kallax regal. Druckzeit mit einem Ender3-S1 ca. 2-3 h.
Vehículo de ciencia ficción. Vehículo Terrestre Blindado - EKALA 1. Incluye 2 versiones, con el compartimento de carga abierto o cerrado. Tamaño: 16x31x14mm *Incluye versión con soportes para impresoras SLA. Para cualquier problema no…
The original model has a connector for a peg-board, but I needed one which I can fix with a screw or a piece of mounting tape. When printing, you may have to cut a bit from below and add a brim to increase the connection to the print bed.
Since I couldn't find any drawers for the quad separator, I made them myself. The size is designed for the MK3S and is also printed on them. Since I'm hiding a few electronic components behind them, they are not quite as deep and are also…
Introducing our exquisite 2D wall art celebrating the multifaceted legacy of Legendary Dr. APJ Abdul Kalam – renowned scientist and former President of India. This 3D printable CAD model beautifully captures Kalam's distinguished profile,…
LiitoKala Lii-S8 Skadis mount
Print with 1 filament change. Photo: Prusament PETG orange under a blacklight.
Multiboard holder for LiitoKala Lii-PD4 Battery Charger using 2 Push fit Connectors. There is a Reinforced version with a stronger Bottom Bracket. I have NOT testes this one yet.
TinyMtn Free Pack 5 - Hawaii This is a package with 3D model files for four notable landscapes in the state of Hawaii, USA. Mauna Kea, 13,796 ft / 4205 m Mauna Loa, 13,679 ft / 4169 m Haleakala, 10,023 ft / 3055 m Napali Coast Each…
LiitoKala Lii-PD4 Skadis mount
Holder for mounting LiitoKala Engineer Lii-500 on IKEA Skadis peg board.
IKEA Modul __________________________ Filament: PLA Support: NO __________________________ Simpel for all 3D-Printer IKEA Guide: https://www.libble.de/ikea-002.781.68-kallax/p/740551/?page=0002
This 3D-printed bookmark is inspired by Kaladin Stormblessed , the beloved character from Brandon Sanderson's The Stormlight Archive series. It’s a perfect accessory for any Sanderson fan who wants to keep a bit of Roshar with them while…
Angled Storage for Nintendo Switch and Charger, intended to help fit the device in a drawer.
Have you lost one of your peg knobs of your KALA Ukulele? Here you go...
holder for the Lii-500s charger, which is designed to be attached to the wall
A replacement saddle for a Kala Waterman ukulele. This ukulele apparently has a very high action. This saddle is around half the thickness of the original, and drops the strings by around 3.5mm. Print it so that the saddle is printed…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This servo creature token is…
Wallmount for LiitoKala Lii-500 charger, compatible with HSW
Würfel für das Spiel Kakalaloop (1 bis 4 Augen) Dice for the game Kakalaloop no support !!
Simple flower pot with helix decor. Since the flowerpot is not waterproof, I designed a flowerpot to fit the IKEA KALAS bowl (https://www.ikea.com/cz/cs/p/kalas-miska-ruzne-barvy-20461378/).
I used the leftmost item from this store https://www.aliexpress.com/item/1005008053423575.html I used 9 mm battery strips for the connector.
No Supports TPU Fits Ikea Kalas Bowls for Kids
réhausse pour deuxième ligne livre de poche dans KALAX
There are three models for this. Print the left side and right side and it will fit into the kalax shelves. Each row holds about 4 Boss size pedals. I also included a stand alone stand that would hold two.
These are parts I created for modifying a Kalamazoo 4-4-0 engine. The smoke box extension was made to use Ozark Miniatures nut bolt castings and marker lights. The rear pilot has a hole for mounting a charging plug as I run all battery…
It is a handle, you can put on the Original metal handle of the IKEA Kalax shelf. It works well with PLA Es ist ein Griff, welchen sie auf den Metall Griff des IKEA Kalax regal stecken können. Funktioniert gut mit PLA
Here is my Ikea skala holder for my crenova multimeter. This will probably not work for most multimeters since the mounting works through this round whatever on the back of the multimeter but it worked perfectly for me.
coil for tin and rosin cívka na cín a kalafůnu
This is a battery adapter that will allow you to insert D cell batteries into a LiitoKala Engineer Lii-500. I included the Fusion 360 file, so you can customize it to fit other applications, but odds are it will fit most 4+ 18650 based…
cílem hry je získat co nejvíce valečku do „banky” Na začatku hry se hrači dohodnou kdo bude začínat. Začínajíci hrač si vezme na své straně z libovolného důlku veškery obsah válečku a postupně je rozděluje do ostatních důlku po směru…
Das hier ist ein Labelhalter für den Vierbödigen einsatz für das Ikea Kalax. https://www.ikea.com/de/de/p/kallax-einsatz-mit-4-boeden-weiss-40423719/ Man kann ein Papierstreifen welcher 50x15mm groß ist. (Passt vermutlich auch in den…
I've been really enjoying playing Pathfinder recently. My players are going to come up against a Kalavakus demon in a future session, so I decided to go ahead and model one up for printing! Given the horns, digitigrade feet, and tail,…
A simple flower pot with a spherical decor. Since the flowerpot is not waterproof, I designed a flowerpot to fit the IKEA KALAS cup (https://www.ikea.com/cz/cs/p/kalas-kelimek-ruzne-barvy-00461379/). Printed with PLA without any supports,…
další… klíčenka tentokrát SKALA tištěno PET-G stříbrná/ černá a jen stříbrná na foto vel. 80mm a tisk 0,12mm , 3 vrstvy/ 15% infil model v STL malinko větší, možno upravit ve sliceru.
An upgraded 3D board and tokens for Tash-Kalar with storage insert for the base game plus all expansions. The board represents the high form mode only, with the insert retaining space to store the original game board and score tracks for…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
My wife broke her hand Lol! This is a repair piece for Ikea's wooden hand model "handskalad" This was made to repair the thumb joint where it connects to the palm but the other finger joints look similar so it may work for them as well. I…
After several spills by my 2-year old, I knew I had to do something. My idea was to attach a larger base to the cup which will stay attached for until the cup needs to be washed. It came out so good that we ended up making several of…
"Get ready to burn some sky!" Bring the ultimate interdimensional party to your 3D printer with this complete set of the Neutrinos. This collection features all three of the peace-loving, hot-rodding rebels from Dimension X as they…
Print: Without supports when printed at shown printing orientation 0.25mm layer height or smaller PLA Use: Slide onto IKEA Kalax from the side. Hang (anything) on
TPU Lid for the Ikea Kalas Kids Cups, no supports.
cooling for charger LiitoKala Lii-M4 https://youtube.com/shorts/f0DtGn6g7zw fan 5в 4010 https://ali.ski/CIVgF9 USB-C https://ali.ski/Q4Yon
When the cup is placed in the cupholder, it “wedges” itself in, such that a sideways force (bump) would have to tip over the large base. An upwards force (lift) releases the cup so it can be used normally. It's an easy print, no supports…
Keep your workspace tidy and your batteries fully charged! This custom 3D-printed holder is designed for the LiitoKala Lii-600 battery charger and a 6-slot 18650 battery organizer , perfectly compatible with the IKEA Skadis wall panel…
A table stand for LiitoKala Lii-M4 for placing on a table to save space and easily view information.
LiFePO4 LiitoKala 3.2V 20Ah - MODELLiFePO4 LiitoKala 3.2V 20Ah - MODEL
Heres minimalistic Skadis holder for my battety charger LiitoKala Lii-PD4. Print it on the side
I printed it with PETG and it holds up great.
This is a parametric leg. Especially to put a 147 x 70 vertically.
A simple lid with holes for the famous IKEA Kalas cup. PS: I was inspired by https://www.thingiverse.com/thing:4917929 - a Green Onion Disk for Kalas Bowl by Elisabeth Oppel
This stand combines with a Handskalad from Ikea to provide a unique solution for storage and display.
Ikea Kalas Bowl remake Printed from Overture PLA, make sure to print slow and hot for best Layer adhesion
Used 4PCS LiitoKala 3.2V 20Ah/25Ah Lifepo4 Battery4PCS LiitoKala 3.2V 20Ah/25Ah Lifepo4 Battery LiitoKala 4S 12V 100A BMS LiFePo4 Battery Protection PlateLiitoKala 4S 12V 100A BMS LiFePo4 Battery Protection Plate
Bottom uses directional snaps, top uses normal. The top one has 2 version - normal doesn't have any play and “loose” has more play.
Eine 180° (bzw.210°) Skala zum aufstecken auf das ft mini servo ( https://www.thingiverse.com/thing:2807112 ) Damit kann man das Servo (hoffentlich) prima einmessen, wenn man einen Zeiger an der Welle befestigt. Oberteil ins Unterteil…
A quick remix of effendi 's model to allow mounting on a rack shelf with 25mm spacing. Nothing fancy, just works. Made to work with 6mm server rack bolts with 12mm head.
Use support. Use T-Nut Mount
Please Leave a Like :-) Just a Replacement for the Kalax and Expedit IKEA Inlets. Silver Filament looks great like original. Pink looks very cute for the Kids Furniture. Dont miss to set Ironing Konzentrik in cura for the Finish Look.…
A locking holder for an 18650 battery designed for the Liitokala Lii-100C charger. It does not allow the battery to jump out of the charger, protects against distortions, and holds itself securely to the case. The default height of the…
Replacement nut (plastic part at the bottom). Tolerance is not perfect but it seems to work correctly anyway. Printed at 100% infill and 0.1mm layers.
The original is fantastic for holding my dualsense 5 and dualshock 4 but it was giving me trouble with the first PS controller (with and without analogs). I added a simple cut so the wire can stay straight. Holds the og dualshock very…
kalabra ' s crown worked out so well! With some minor tweaks the crown was perfect for my son's idea! First, I resized the crown to what we needed. Second, I hollowed out the inside of the crown so it could be used on the head of a…
These files supplement the excellent design by 1Peter567 (available here ). You'll need to purchase the originals from him. A resized set of board supports that both fit on an Ender 3 print bed and also take up the entire length of the…
Just a quick wall mount you might also want to use. It does not need supports. Print in PETG I made one in PLA, and it is holding up, but the retention clips will fail at some point. I designed it with a better opening for the USB ports,…
For my new Bambu Lab P1P printer I came up with a placement on a kalax shelf. During installation I was forced to move the printer 7cm forward due to the waste slide when cleaning the nozzle. I modeled a simple holder that is screwed into…
kalasa insence holder #photoframe #photo
If you, like me, own these now old-school plastic bowls from IKEA, you probably let them drift deeper and higher into kitchen cabinets. As a kid, I remember using them every day, the colorful plates for toast, bowls for cereal. Now, they…
I've been using the Ikea KALAS plates as cat food plates for about a decade, and they work fantastic. Wanting to organize them a bit, I printed up this wall mount holder. Assembly is pretty straightforwards, but I've included a drawing…
Here is the "KALA VASE"! I created this design starting with a block of paper and a pencil. In order to give a texture, I used the "FUZZY" technology available in many slicers.. Easy to install.The vase has been designed to fit inside a…
Small simple mount for hand scalad without support. First attached to the position where you want it and then the handscalade is inserted and can still be rotated before it is attached with two screws. It is best to pre-drill the holes…
Nine Diwali cookie cutters for nankhatai, shortbread, sugar cookies or rolled fondant: a rangoli, a kandil lantern, a lotus, a kalash, a rocket cracker, a mango leaf, a peacock feather, an anar flower pot and a star lantern. Each cutter…
IKEA Kalas is a little leight mug (not only for toddlers) which has the ideal size for rooting plants. I took https://www.thingiverse.com/thing:3036580 and adjusted for my purposes it so that it can be clipped onto a tube of 1.6cm…
Print 6 times the "Plant-Pots-17-Helice.stl" file in vase mode
I don't have an iMax B6 on hand, so I decided to use Liitokala's charging, which has a test function. I modeled an adapt
There are many different Kalahas here. But I wanted one that was easy to bring on my vacation. I printet the balls in 12 mm. Cut a few mm off the bottom to make it adhere better to the print bed. The large bowl uses the same STL file. I…
J'ai récupéré un fichier STL grâce à l'aide Terrain2STL (Excellent soft) dans Prusa slicer (très excellent lui aussi) Simplifié le maillage → moyen Choisi une échelle avec une distorsion x2 pour Z Imprimé en PETG avec épaisseur 0.1 sur…
I designed this to help keep coolant from splashing onto the floor while using the saw. It sits right on the length setting bar and catches the coolant from the right side nozzle. Edit 12/20/23: Made a V2. This version eschews the…
Easy print to turn IKEA KALAS plastic glass into small planter/ starter self watering pot. Spring has sprung, and it's time to prepare your plants for the garden. I designed this self-watering pot using glass cups from IKEA and was amazed…
can be used for model tanks and more perfect for being painted and terrained, intended for use with detail kits, when printing use pla on a very low infill if dont change the scale or it wont fit in the shelf, splitting the model into…
The holder is designed to be installed on openGrid using openConnect latches.