Admiral Gial Akbar : Star Wars : Its a Trap
Admiral Gial Akbar : Star Wars : Its a Trap
- Downloads
- 222
- Likes
- 52
- Rating
- 5
Counting matching models…
Admiral Gial Akbar : Star Wars : Its a Trap
Attempt at Akbar and Jeff using displacement and normal maps.. I would call this a stage 1 in an attempt at flat 2d pencil drawn non shadded cartoons → a 3d thing. Its a failure but I just dig these guys… so until next time.
JERRARI3D.com The BlockBar Series is part of the GEN2 Decor series. The handles and knobs can mixed and matched with different faceplates to create a unique personalized storage solution that is completely 3D printable. Video…
Eine kleine Christbaumspitze (19 cm breit) in Sternform. Update 30.12.2022: Aufbewahrungsbox hinzugefügt. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 mm Filament: GIANTARM PLA Silk…
One version is installable and removable without sliding it out to the side, the other is slide-out only. Best printed in PETG. No support needed. --- Eine Version ist ein- und ausschwenkbar, ohne den Haken zur Seite herausschieben zu…
Ein steckbarer Kleiderbügel in 43cm Breite. Druckbar auch auf kleinen Druckern mit 200x200 mm Druckbett. Print Settings Printer Brand: Anycubic Printer: i3 Mega S/Pro Rafts: No Supports: No Resolution: 0.2 mm Infill: 25 Filament: extrudr…
Add a galactic twist to your holiday decor with this pack of Star Wars-themed Christmas ornaments. Featuring iconic characters like , Yoda, R2-D2 and C3PO, these 3D models are perfect for creating unique and personalized ornaments. Each…
I have always been meaning to make a bust chess set of the star wars Characters. Why not start with one of the most interesting iconic characters " Its a trap" Admiral Ackbar Or you can just print him as is, or as a mask, but you'd have…
Admiral Ackbar bust with a twist on his "It's a trap" line from Star Wars - Return of the Jedi. Rebel Alliance logo on the sides of the foot of the bust. This is a remix of the Ackbar bust by mattjustice (Thingiverse).
Moderner Miniatur-Schreibtisch im puristischen Look: geschlossene Schubladenfront, schmale Arbeitsplatte und seitliche Rahmengestelle. Das Modell wurde in realen 1 : 1-Abmessungen konstruiert, sodass du es per Slicer in jeden Maßstab…
I needed a spring cover to cover up open switch boxes and the ones in my local hardware store were not rigid enough for what I needed, so I designed my own with increased thickness and separately printable legs for increased rigidity. The…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Filament Halter für die Wand, einfache Montage, Schwenkbar 90°
Need a flawless 3d print of this? Visit https://muckychris.com/collections/buddhas introducing the Original Muckychris 3D Printed Pop-Culture Buddha Statue: A Fusion of Art, Technology, and Nostalgia. Celebrating more than 15 years of the…
Ein variabler Halter für den Haartrockner (Fön). Er besteht aus zwei Elementen. Der Ring, der zur Aufnahme des Fön dient, kann um 180 ° gedreht werden. So das der Fön, bei Bedarf, je nach Bauart ausgerichtet werden kann. Die Aufnahme hat…
Die Snackbar passt perfekt auf das Druckbett eines MK3/4 und auf Stanley-Becher mit dem Außenmaß von 10,2 cm. https://amzn.to/3Feq9Z6 Rand unwichtig, Stützen notwendig edit: V9 sitzt besser auf dem Cup!
Pluggable tea light collector. Can be pluged together in the desired size and layout. Ideal for not having to store loosely tealights anymore, they are ideal for quick preparation in the kitchen.
Star Wars - Characters - Admiral Ackbar
A new 3D figurine generated by AI, Admiral Ackbar Bust from Star Wars. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
foot for keyboard HP Category: Computer
Allgemeines Ich fand das Originalmodell sehr cool und habe es daraufhin ein wenig für mich angepasst. Druckeinstellungen Drucker: BambuLab P1s , X1C oder P1P Schichthöhe: 0,2mm Infill: 9-15% Bienenwabe Vertikale Perimeter: 3-4 Decke- &…
English: This 3D printable party sign features a changeable text area and ergonomic handle – perfect for events, photo booths, and table decoration. A full set of pre-designed signs is in development, along with a generator that lets you…
english: Shadow gap picture frame for canvas pictures. The size is only limited by the print bed. Smaller picture frames can be printed in one piece, which makes printing much easier and eliminates the need for assembly. New sizes can be…
Die Steckbare Rankhilfe kann einfach erweitert weden Druck: - PLA - Stützgeometrie auf dem Druckbett
Step into the ModuVerse ⚙ — epic 3D printable mech beasts born from metal and instinct. Unique collectible warriors with futuristic animal designs — download, print, and command your army of Core-forged legends! Get all premium models…
Monitor Wandhalterung schwenkbar (für 75x75 mm Aufnahme) 3-teilige Ausführung Ich werde damit einen 15,4Zoll USB Monitor (1kg) an der Wand befestigen. Druck: PLA Overture Light Grey 0,20 Layerhöhe 0,42 Layerbreite 3 Wände 4 Boden / 4…
Ablagen schwenkbar, vorne links, rechts, hinten links einsetzbar. Sauber abgerundet jeweils passend für die mitgelieferte Zange, sowie Würth / Knippex Zange. Aber Vorsicht ; Unten sind Lüfter, nicht zu voll packen. Rechts vorne lasse ich…
Da mir die originalen Klebehalter der Hue Playbars überhaupt nicht zusagen habe ich eine schlanke abnehmbare Lösung konstruiert. Mit den Tesa Powerstrips halten die wunderbar an allen glatten Flächen. Bei mir sind drei davon an einem 34"…
DE: Ein steckbarer Weihnachtsbaum zum Selbstdrucken – schnell aufgebaut, platzsparend und jedes Jahr wiederverwendbar. Die einzelnen Teile lassen sich einfach zusammenstecken, kein Kleben nötig. Perfekt als Deko auf dem Schreibtisch, im…
English: "Fire" button plate found on Stern Pinballs to be placed on the Lockbar. Resize it considering the size of your button, in the part indicated in the photo. Português: Placa do botão "Fire" encontrada nos Pinballs da Stern para…
-3mf file made in Bambu Studio of original model. -Multiple plates with the whole shelf, blank shelf, and left and right pieces made by adding negative objects to act as blockers. -I know this opens in Anycubic slicer however I have not…
I know some mods can boost this blaster to much higher FPS (by swapping to a longer barrel), but I am not a fan of lengthening this already long blaster; I would like to keep it as is. So I made this to boost performance a bit while not…
Nach dem HT50-Set hier die vier anderen gängigen Nennweiten: DN32, DN40, DN75 und DN100. In jeder Größe der gleiche Teilesatz, insgesamt 44 Dateien.…
friend thought it was funny so i made it for him and thought i'd share
Kleine Änderung am Kettenglied um es steckbar zu machen.
Ein Druckbares wappen von World of Warships
My own design for the broken foot of my HP KBAR211 keyboard. Found other designs but were not exactly fitting so I designed mine. Hope it could help someone.
Description This is an old cafetaria that once stood near the railway station in the Dutch city of Enschede. All parts are printed with 0.4mm nozzle and 0.20mm layers. I printed the parts in the following batches: Batch 1 - Floor and…
This is a simple stand able to hold 6 GeekBar disposable vapes, allowing you to have them standing up.
Use with an Arnoz MX Button (Adressable RGB LED Module), clear flipper button and PAL Nut. I also made a guide for the micro switch to prevent the blade from falling off the button tips. See my other models.
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Chibi Ackbar model reimagines Admiral Ackbar from…
Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…
Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…
Dieses Set umfasst 3D-druckbare HT50-Rohrverbinder (DN50, Außendurchmesser 50 mm) in drei Varianten: 90° Bogen, 87° Bogen und ein gerades Verbindungsstück – jeweils mit integrierter, ebenfalls druckbarer Dichtlippe. Die Maße orientieren…
Als Basis dient dieses Model: https://www.printables.com/model/1331221-rotating-wheel-base-for-gardena-r40li-and-similar Hierfür habe ich ein schwenkbares Hinterrad konstruiert. Man benötigt vier Kugellager 608 (8x22x7mm). Für die…
Used the SCAD files to custom fit your knife. Open the .scad files in OpenSCAD go to Window then click Customizer. Some filing will likely be required. A little glue will also be needed. There are two holes for four magnets each.
Ein stapelbarer Halter für diverse Kabel, wie z.B. USB-Kabel. Die Kabel können nicht herausrutschen.
INDIA, Mughal Empire. Jalal al-Din Muhammad Akbar. AH 963-1014 / AD 1556-1605. AV Mohur (20mm, 11.19 g, 6h). Duck type. Agra mint. Dated Khurdad Ilahi year 50 (22 May – 21 June AD 1605).
Das Eckregal ist innen in zwei Fächer geteilt. Es besteht aus der Eckablage selbst sowie dem Halter Der rechte Halter wird mit zwei Streifen Doppelklebeband an den Kacheln fixiert. Danach wird das Regal wie auf ein Scharnier einfach…
Ich habe habe hier eine druckbare Alternative Seitenwand zu den Acrylplatten des "The Schield Enclosure" für den P1P entworfen Gedruckt mit PETG und 0.2mm Layer Hier der Link zum Enclosure →…
Just what the name says - an Admiral Ackbar drink coaster. Print Instructions I printed in PETG with two colors via filament switching.
Ich habe habe hier eine druckbare Alternative Rückwand zu den Acrylplatten des "The Schield Enclosure" für den P1P entworfen Gedruckt mit PETG und 0.2mm Layer Hier der Link zum Enclosure →…
Dieser Adapter dient zur beweglichen Durchführung des PTFE-Schlauches (4mm) durch das Gehäuse der Trockenbox. Das Filament läßt sich dadurch leichter Abrollen. Der Spalt zwischen der Kugel und der Aufnahme beträgt 0,2 mm und läßt sich…
Eierbecher mit Ei, zusammen oder einzeln druckbar Wichtig für jede Kinderküche, Scalierung über PrusaSlicer Druck mit 0,2mm, Düse 0,4mm
Einfacher Sterngriff zum aufstecken für Schrauben M8 mit Sechskantkopf. Schrauben: Kopf-Durchmesser ca. 12,8 mm Kopf-Höhe: ca. 5.1 mm Sterngriffe: Modell 1 Durchmesser ca: 35mm Modelll2 Durchmesser ca. 30mm Gedruckt auf Bambulab P1S mit…
Snackbar für Ihre Couch. Perfekter begleiter für Ihre Snacks sowie allerlei Getränke, ob Gläser, Tassen oder auch flaschen, alles hat ihren Platz. Die Fernbedienungen können vorne gestellt oder quer gelegt werden. Snackbar für Ihre Couch.…
Beschreibung: Dieser minimalistische Möbelgriff wurde für Schubladen als Ersatz für einen defekten Griff erstellt. Er wurde speziell für den 3D-Druck entwickelt und lässt sich ohne Support sauber drucken. Features: Lochabstand: 127 mm…
Keyboard 'kickstand' base (idk how that is called) replacement
I reccomment layer height about 0,1-0,1,5 mm 100% infill ironing ON
Variables steckbares Wasserverteilersystem Für Schläuche mit einem Innendurchmesser von 7-8mm. Sie benötigen O-Ringe 7-10x1,5mm und 9-12x1,5mm. Der kleinere O-Ring muss in die 2mm Nut und dient nur der Einrastfunktion. Der größere O-Ring…
A universal mount (wall thickness for boards up to max. 25mm) to fix dowel rods with a thickness of max. 30mm over two boards. Even the screws are printable. Therefore the dowel rod can be fixed within the mount and is secured against…
Added a Geek Bar holder and made the zyn holder to hold my Wip caffeine pouches
An unserem Sofa ist ein Fuß zerbrochen. Ich habe das Modell passend skaliert (30 mm hoch / 55mm Durchmesser). Außerdem war der alte Fuß nicht geschraubt, sondern nur gesteckt. Daher habe ich einen Stift ergänzt (13mm Durchmesser). Das…
Wir haben uns dieses Jahr einen neuen Futterspender gekauft von Dobar die “Pickbar”. Diese gab es bei uns im Baumarkt im Angebot. (https://shop.dobar.de/produkt/innovative-3-kammer-futtersaeule-pickbar/) Da hier das Futter schon etwas…
Ist ein normales Steckdreieck zum lernen für Kinder
Angepasstes Design des Bahnsteigdaches um es leichter und schneller drucken zu können.
Das Regal im Ganzen, mein Drucker hat nur 220x220 somit muss ich es teilen
Um die Qualität der Nachsicht bzw. die Ausleuchtung für unser Babyphone (Momcozy BM03) zu verbessern habe ich bei Amazon um ca. 8€ dieses Infrarot Modul auf 940nm IR Basis gekauft. ->…
Just an extended trackbar to straighten out the third axle. I didn't like that the third axle was crooked so I designed a modified trackbar. Just a straight replacement.
Eine Temperatur Kontrollbox für die Platine XY T01-4 um eine kleine Schaltzentrale neben dem Drucker einzurichten. Die Box ist steckbar und kann mit weiteren, gleichen Boxen, erweitert werden. Eine einfache Kabelführung seitlich…
Schiene für das Spürhund-Training (Mantrailing, Nasenarbeit): Sie hält 3 Dosen mit 50 mm Durchmesser im Abstand von 100 mm. Mit dem gerundeten Schwalbenschwanz an den Enden lassen sich beliebig viele Schienen zu längeren Reihen…
Ein zweiteiliger Behälter mit aufklappbarem Deckel – vollständig druckbar, kein Hardware nötig. Features: Deckel auf integriertem Scharnier – kein Scharnier kaufen, einfach alles Drucken. Anschlag im Griff verhindert Überdrehnen des…
"The Eye" – A compact, interlocking laptop stand for on the go. My goal was to create a simple, minimalist laptop stand that is easy to clip together and slip into any backpack. I wanted a solution that is ultra-portable but offers full…
This is a press-to-fit model. Its purpose is to house a custom LED array. It's sturdy enough to last and has ventilation to let the heat from the LEDs out. You could use a Raspberry PI Pico, but I've got a LOT of ESP32s lying around :).…
Made this as a gag gift. Now I'm going to make them for every disposable vape line, as well as pouches and cigarettes. Printed 2 Walls, 10 Percent Infill, Arachne Wall. .20 First, .16 Second. Layer height is optional, need to play around…
Das rote Teil des Abschlepp LKWs ist neu konstruiert worden da es gebrochen ist. Es ist mein erster Versuch mit Ki erstellten Inhalt nachzuarbeiten und online zu stellen.
I present to you, the X-SHOT BreakBarrel AKIMBO PRIMING HOOKS These are meant to be used w/ GEMENEYE's Picatinny Stock Point to be able to mount my hooks.…
One version is installable and removable without sliding it out to the side, the other is slide-out only. Best printed in PETG. No support needed. --- Eine Version ist ein- und ausschwenkbar, ohne den Haken zur Seite herausschieben zu…
English: This 3D printable party sign features a changeable text area and ergonomic handle – perfect for events, photo booths, and table decoration. A full set of pre-designed signs is in development, along with a generator that lets you…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Chibi Ackbar model reimagines Admiral Ackbar from…
Keyboard 'kickstand' base (idk how that is called) replacement
Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…
Als Basis dient dieses Model: https://www.printables.com/model/1331221-rotating-wheel-base-for-gardena-r40li-and-similar Hierfür habe ich ein schwenkbares Hinterrad konstruiert. Man benötigt vier Kugellager 608 (8x22x7mm). Für die…
Ein zweiteiliger Behälter mit aufklappbarem Deckel – vollständig druckbar, kein Hardware nötig. Features: Deckel auf integriertem Scharnier – kein Scharnier kaufen, einfach alles Drucken. Anschlag im Griff verhindert Überdrehnen des…
Discover the latest “mini” version of the 3D-printable anemometer "Anemosens," designed for precise wind measurements and size requirements. The mini version of the Anemosens features optimized ball bearing sealing for even more reliable…
Miniatur-Küchenblock „Simple Kitchen“ – STL-Modell 1:1 konstruiert , frei skalierbar – passt in Puppenhäuser, Dioramen und Modellbau-Szenen. Einteiliges Küchenmöbel mit Herdplatte, Spüle und Unterschrank – druckfertig, geschlossenes Mesh.…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Chibi Ackbar model reimagines Admiral Ackbar from…
Star Wars - Characters - Admiral Ackbar 3D printable model.