P
PrintablesJen1k
RIS lišta KeyMod/MLOK
Umožňuje připojení široké škály doplňkového příslušenství.
- Downloads
- 564
- Likes
- 48
- Rating
- 5
Search results: keymod
46 models
P
PrintablesKenny "XDr4g0nX" Verhoeven
Keymod Rails Segments
These are keymod attachment rails for use with keymod RIS/RAS rails. I have made several sizes to try and make as much usefull sizes as I could think of that are still compatible with the original keymod sizing. There are 3, 5, 7, 9, 13…
- Downloads
- 444
- Likes
- 42
- Rating
- 0
P
PrintablesCuntan Marius
KeyMod Angle GripFor Airsoft
Remix of KeyMod Angle GripFor Airsoft fixed the keymod required holes increase the length to be usable on keymod rail fixed the design for a better print and look removed the angled base for better stability Category: Toy & Game Accessories
- Downloads
- 375
- Likes
- 67
- Rating
- 0
P
PrintablesKenny "XDr4g0nX" Verhoeven
M4 Airsoft RAS Keymod Rail
After playing a couple of games with my M4 AEG I found that the plastic handguards were just not sturdy enough for me and looked a bit too stock. I then sat down and took my M4 apart and studied the Delta ring and gas tube connection,…
- Downloads
- 367
- Likes
- 44
- Rating
- 1
P
PrintablesQwermMakes
NotaSlate (Keymod Handstop)
A small keymod handstop that happens to have the same size and shape as a Slate Stop. Includes 3 versions and STEP files including STEP files for the template if you want to make a MLOK version. Print mount side down Settings used:…
- Downloads
- 338
- Likes
- 27
- Rating
- 5
P
PrintablesQwermMakes
NotaKAG (Keymod Handstop)
A keymod handstop that happens to have the same size and shape as a Bravo Company KAG. Includes STEP files aswell as a STEP file for the template if you want to make a MLOK version. Print mount side down Settings used: Material: PLA+…
- Downloads
- 305
- Likes
- 30
- Rating
- 5
P
PrintablesOnlyShellsRemain
KeyMod Angled Foregrip AFG
Remix of Toxic Sandbox Keymod angled foregrip. https://www.thingiverse.com/thing:2889845 I have also uploaded an M-Lok AFG. You can find the M-Lok AFG here - https://www.printables.com/model/304426-m-lok-afg-angled-foregrip Added lugs to…
- Downloads
- 299
- Likes
- 46
- Rating
- 5
P
PrintablesKoddra
Airsoft keymod rail 75mm
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when attached…
- Downloads
- 293
- Likes
- 45
- Rating
- 0
P
PrintablesKoddra
Airsoft keymod rail 35mm
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when attached…
- Downloads
- 260
- Likes
- 72
- Rating
- 5
P
PrintablesJustin Spanier
Keymod front grip for AR-15
Front hand grip for AR-15 with Keymod mounting system. You'll need Keymod screws to attach it. Here's a video where I attach this print to my rifle. If you don't want to hear me babble on about other stuff, start at 8:52.…
- Downloads
- 231
- Likes
- 32
- Rating
- 0
P
PrintablesKoddra
Airsoft keymod attachment part
DISCLAIMER: Since this is still just plastic don't expect for it to be able to hold some heavy attachments, it is meant for just some light and small things that won't be under heavy force. I myself have tested this part for a grip and it…
- Downloads
- 211
- Likes
- 25
- Rating
- 4
P
PrintablesFW_3D
MLOK/Keymod - Rail Cover
The covers are designed for the long handguard (16.75") for both Keymod and MLOK and sit tightly in the rails. A rubber hammer is recommended for assembly. For the design I took measurements and used the official technical drawing of the…
- Downloads
- 169
- Likes
- 21
- Rating
- 0
P
PrintablesKoddra
Airsoft keymod rail 135 mm
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when printed…
- Downloads
- 168
- Likes
- 32
- Rating
- 0
P
PrintablesJadozub
Parametrized KeyMod Picatinny Rail
This is a parametrized KeyMod Picatinny rail designed to be printed diagonally for best strength, that I've designed for mounting my bipod to a handguard. It uses chinesium KeyMod screw set bought on AliExpress. Following dimensions are…
- Downloads
- 161
- Likes
- 13
- Rating
- 0
P
PrintablesJustin Spanier
AR 15 keymod hand guard
Custom handguards for AR 15 with keymod mounting system. Will need supports. You'll need keymod screws to attach it. https://youtu.be/64Xc5Ai6wJ8 UPDATE Added a bottom handguard with a hand stop on it. https://youtu.be/Zsz355lkg-g…
- Downloads
- 139
- Likes
- 54
- Rating
- 4
P
PrintablesQwermMakes
Keymod Cable Guide
Keymod Cable Guide by Qwerm A set of small keymod cable guides. Designed for use with 3.5mm cables. Print Orientation: Print with face side down. Recommended Print Settings: Layer Height: 0.2mm Wall Line Count: 4 Infill Density: 30%+…
- Downloads
- 129
- Likes
- 26
- Rating
- 0
P
PrintablesFüri
Lamp holder for M-lok / Keymod
This is a flashlight holder for airsoft AEGs with M-lok or Keymod. The flashlight has a diameter of 25mm. Additional components needed: 2x M4x20 cylinder head screw 2x M4 nuts 1x Set of M-lok / Keymod screw and nut
- Downloads
- 119
- Likes
- 19
- Rating
- 0
P
PrintablesKoddra
Airsoft keymod rail 115 mm
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when printed…
- Downloads
- 116
- Likes
- 26
- Rating
- 0
P
PrintablesPlanetler
Airsoft KeyMod Foregrip
Just a simple KeyMod foregrip. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25 % Filament: DasFilament PETG Black Category: Sport & Outdoors
- Downloads
- 110
- Likes
- 44
- Rating
- 5
P
PrintablesJustin Spanier
Keymod Flashlight Mount
This is a keymod flashlight mount for use with the tactical 588 lumen flashlight sold at Harbor Freight. I had to use supports everywhere, but it turned out pretty good. I had the minimum overhang angle set pretty high so that I didn't…
- Downloads
- 90
- Likes
- 22
- Rating
- 0
P
PrintablesKavitate
Keymod Hand Stop
Hand stop for a keymod style rail. Will also need the nut and bolt to mount it.
- Downloads
- 85
- Likes
- 13
- Rating
- 0
P
PrintablesKenny "XDr4g0nX" Verhoeven
Keymod Flashlight Pressure Switch Mount
Needing a mount on my keymod rails to mount my flashlight pressure switch for use during a airsoft night game. It mounts to the rails using normal keymod nuts, I have designed some that you can print with a M3 nut. Adding some velcro…
- Downloads
- 75
- Likes
- 21
- Rating
- 3
P
PrintablesCamikatze
AUG Keymod Underbarrel Railsystem_V3 (new from scratch)
AUG KeyMod Underbarrel Railsystem inspired from Corvus Defensio Railsystem for the Steyr AUG (STG77). Build from scratch with DesignSpark Mechanical 5.0 Only the KeyModNut is a Remix. Source:…
- Downloads
- 65
- Likes
- 10
- Rating
- 0
P
PrintablesConcealed45
Keymod Mini AFG
Small AFG for Keymod rail, Odinworks inspired. Small but comfortable for a good hand angle if using a thumb over bore grip. I could only get it on with just the rear pin in place with the keymod screws i had which seemed short. It is…
- Downloads
- 55
- Likes
- 9
- Rating
- 0
P
PrintablesSn0wix_
Keymod Picatinny rails
This Picatinny rail is designed for compatibility with KeyMod systems and adds a sleek and functional touch to your setup. Print Notes: For a clean finish on the side of the rail, be sure to enable supports during printing. After…
- Downloads
- 51
- Likes
- 5
- Rating
- 0
P
PrintablesTanner Farley
KeyMod Bipod Mount
Prints in two pieces for ease and strength. Requires (2) KeyMod rail hardware commonly found on Amazon/eBay.
- Downloads
- 50
- Likes
- 9
- Rating
- 0
P
PrintablesNEXFORGE
AAP01 Tactical KEYMOD Handguard
⚠ Note: This model is for airsoft use only. It is not intended for real firearms. Upgrade your Action Army AAP01 with this precision-engineered tactical handguard. Designed for durability and customization, this lightweight rail system…
- Downloads
- 48
- Likes
- 6
- Rating
- 0
P
Printablesbrass_ring
KeyMod
FreeCAD parametric KeyMod Rail. Category: Sport & Outdoors
- Downloads
- 46
- Likes
- 3
- Rating
- 0
P
PrintablesBrambora
KeyMod handguard cover
Fore-end cover using the KeyMod interface for attachment to the weapon system. The upper surface features parametric honeycomb perforation , which serves as an anti-slip element (grip). In accordance with requirements, the end of the part…
- Downloads
- 40
- Likes
- 6
- Rating
- 0
P
Printableso-murphy
![[REPLICA] GrovTec GTSW230 6 Inch 15 Slot Keymod Picatinny Rail](https://media.printables.com/media/prints/eae493a0-47f2-4bf5-bc17-28a455c0a74b/images/10239750_391bc8e2-1bbb-499a-8c3b-e210203abea5_45f9e104-28c1-4521-81cc-70f34d7ab2a7/screenshot1.png)
[REPLICA] GrovTec GTSW230 6 Inch 15 Slot Keymod Picatinny Rail
# GrovTec GTSW230 6 Inch 15 Slot Keymod Black Anodized [Product link](https://www.ozgunmart.com.au/grovtec-ar-foreend-picatinny-rail-adapter-6-15-slo~120813) ## Printing Guidelines: The printing orientation is as provided in the file. The…
- Downloads
- 35
- Likes
- 2
- Rating
- 0
P
PrintablesJoseph DAndrea
JKL Precision Labradar trigger Keymod mount
If you have a labradar, you need the JKL PPrecision trigger. This will allow you to mount that trigger to a keymod rail
- Downloads
- 35
- Likes
- 2
- Rating
- 5
P
Printablesexpert shooter
Feyachi Tac Light Pressure Switch Keymod Mount
The original model used M-Lok mounting but I changed it so you can mount it to Keymod systems.
- Downloads
- 26
- Likes
- 3
- Rating
- 0
P
PrintablesMilo Printables
Keymod Rail 3 Slots
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 3 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
PrintablesMilo Printables
Keymod Rail 5 Slots
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 5 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
PrintablesKuku
SG Go KeyMod clip
I wanted to clip my SG Go timer on my rifle so I designed clip to be mounted on handguard. For assembly you need threaded insert M2x3x3 and M2 screw long enough to fit your accessory rail (I used M2x12 HEX screw) I recommend to modify…
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
PrintablesMilo Printables
Keymod Rail 4 Slots
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 4 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesMilo Printables
Keymod Rail 6 Slots
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 6 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesMilo Printables
Keymod Rail 13 Slots.
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 13 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesMilo Printables
Keymod Rail 11 Slots.
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 11 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesNerfed_Breadsandwich
Keymod inline Scout lightbar
This is a remix that combines keymod a mounting solution with an inline Surefire Scout mount. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Category: Sport & Outdoors
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesMilo Printables
Keymod Rail 9 Slots.
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 9 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesMilo Printables
Keymod Rail 10 Slots.
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 10 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesMilo Printables
Keymod Rail 7 Slots.
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 7 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesMilo Printables
Keymod Rail 8 Slots.
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 8 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesMilo Printables
Keymod Rail 12 Slots.
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 12 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
- Downloads
- 8
- Likes
- 2
- Rating
- 0