61 models
Decorative Gothic Dragon Door Knocker ** THIS IS NOT FUNCTIONAL ** no moving door knocking mechanism. it just looks like it.
Print approx. €7.44–€9.09 excl. taxPreliminary estimate for one variant
Decorative Gothic Skull with horns Door Knocker
Print approx. €4.80–€5.86 excl. taxPreliminary estimate for one variant
This design is now available on Cults3D or through my Patreon exclusives. The Hear No Knocker is still available as a free download to make sure you’ll love the set before getting both. Though the files have been pulled down, the post…
A very nice and intimidating looking doorknocker. Took me 33 hours and about 400 grams of filament to print but was absolutely worth it. Painted it and added some rust powder. Print instructions Print at 0.2 mm layer height and make sure…
This design is a tribute to my beloved Labyrinth. Knockers are available with or without mount holes. Print the Knocker and KnockerSwing separately then flex to assemble. Supports are required for the KockerSwing and are pretty helpful…
The Dragon Door Knocker was a bit poly heavy, so I ran it through meshlab to reduce the poly count a bit for further manipulation. Category: Models
Decorative Gothic Gargoyle Door Knocker
Working door knocker Print instructions Either print whole or split. I used tree supports on ABS with great success. Shout out to artist Kevin Kelley (Poog) who made it https://www.facebook.com/KevvyKupcake/
I took Shira's gorgeous model from Thingiverse and fixed the files in Meshmaker. The grey and turquoise one was printed from these files. The large nose horn on the blue dragon was sculpted with epoxy putty, and is not part of any stl…
Scary skull door knocker Halloween decoration. Print in full. If your printer is calibrated correctly, the wheel should move right away. Have fun!
Because nothing says welcome home like a gargoyle guarding your door with eternal vigilance. Perfect for adding a gothic touch to your entryway. The ring prints enclosed in the mouth and rotates freely with a little tension break. Prints…
The ring gets press fitted on the knurled part of the rotating knocker. You may need to scale it up or down a few % to get the fitment right.
This 3D scan was edited with MeshMixer to make it 3D printable. It was scaled, oriented, had some holes filled and had a small bit of modeling done. I used VisCAM to add a hole in the back that can be used to hang the model on a screw or…
A semi automatic door knocker. Turn the knob and let the woodpecker hammer on the door. Print instructions Required additional parts: 2 M3x10mm screws with countersunk head 5 M3x8-12mm screws, head shape irrelevant a rubber band Assembly…
Keyd goofys nose and printed it seprate so you dont have to use as much material. you can find his ears on Shzzilla 's page. also printed it at 98% or somthing close to that with the nose cut fits on a mk3s+
a small bushing for door knocker on my 1995 GMC van, although it should work for many similar age chevy/gmc vehicles. it is a bit difficult to get on, but once it is it works very well. helps with rattling/ poorly closing doors printed…
Be aware. Keep this out of reach of your children. But if you want to tease your friendly family… Make a gift.😉 You can also enjoy the click-clack yourself and find out that you can create your own rhythm by controlling speed and through…
Knockers! door knocker of a crab on a anchor. This requires supports and is not an easy print. it needs to be done in PETG or better as it supposed to sit outside. orginally uploaded by oliverlaric on thingiverse and knockerized by me.
There are two versions included: One with the eyes attached to the head One with the eyes separate from the head, so you can easily add LEDs or a small sound mechanism https://youtu.be/xiMK-e_Cqm8 Más información: http: // Diwo.…
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
Lion Bust Door-Knocker 3 Piece Design Drawer Pulls By: David Orlo Design Details: I originally designed this for a couple of drawers to use as fun drawer knobs, with the idea that I could pay a little extra to have them printed in metal…
The door knocker serves as a Christmas decoration for the front door and also works as a knocker and can be used to knock. A peephole on the door can go through the opening on the largest part. When folding, it is necessary to use glue,…
Use double sided tape. I recommend to print it with +20% infill, otherwise it will sound hollow and cheap Print in 3 parts and just slot it together, usable just as is, but glue is recommended.
So this is my halloween door knocker. Whey you raise the handle red leds lights on, better effect if light is low. It uses 2 red diodes connected in parallel , 2x 47R resistors, 1x13 mm micro switch and 2x1,5V AA battery power suply. it…
The knocker moves and works, as long as the head can be secured to the door properly. I used one screw and piece of velcro. The knock is not very loud and is really plasticky / hollow sounding. I tried to remedy that by hot gluing a…
Easy to print. comes in two pieces. Print in PETG filament. 20 percent infill. does not need any supports or brim.
Recommended print settings: Material: PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled I printed this model from Thingiverse, and am re-uploading to Printables. No changes made to the…
This ornate lion head door knocker model features a bold sculpted lion face framed within a circular decorative plate. Flowing mane details, pronounced facial features, and a large ring knocker create a strong architectural statement…
Knock, knock. Who’s there? Gregor! Gregor the Gargoyle lost his head, but don’t worry, it’s going to good use! This is a scaled-up door knocker remix of the Gregor the Gargoyle statue from our “Fabled Creatures” collection. What better…
Peg should be a tight enough fit to not require glue. Printed at .15 Layer height with organic supports. Fist is same as original design.
A legally binding sign to dissuade missionaries and salesmen. print size: 200 x 200 (I will add a pics as soon as possible.)
This will ensure that you will not accidentally knock your gain while recording! this remix uses 4 M3-30 bolts to act as a barrier. In Cura, you need to use support on the bottom of the print but I opted to clear the supports from the…
This is a print in place, ratcheting handle that makes turning the grounds knocker on a Timemore 078 a little easier. Simply slide the printed part onto the original ground knocker. The friction fit is all that's needed.
A simple and heavy door knocker. Probably looks better the bigger it is.
Printable 3D model. Metapod door knocker. Pokémon inspiration. STL File.
Lion head door knocker. Low poly style. File format: STL Lion 1 - Main head Lion 2 - Ring Lion 3 - Rod 2 pieces Lion 4 - Knocker Rod insert in ring and mounth, after thath glue second part of rod. Print settings: Layer Height: 0.2 mm…
I'm adding this remix again correcting the knocker that was turning sideways, now I've added rings to prevent rotation
This knocker is a rhino head with the lion knockers' knocker.
Doorbells and doors can be a vector for transmission as many people, such as people who deliver mail, touch them. I made a foot-activated door-knocker so mail-people can knock on your door without touching the doorbell or door. It's made…
Device to insert into extra coffee mug to knock out spent grounds from reusable Keurig pod. Update: I created some legs that can snap on, to keep the knocker from falling into the cup
Varia Grinder Knocker with Dosing Cup Cover for New Varia Dosing Cup This attachment can be used on the Varia Grinder outlet to remove excess coffee grounds. It is currently sized to fit the new Varia dosing cup. I will also make one for…
Door Knocker Santa Hat I designed this based on a suggestion from my brother-in-law. My family loves the personality it adds to our front door. :) It took under 20 minutes on my printer with 15% infill, and 0.32 layer height. I didn't…
Hello Tribe, With the fact that Halloween seems limited here lets share are mix with you. Inspired by the movie Pumpkin Head. We hope you enjoy Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on…
Hey there Tribe, We may have just the gun but here is a Halloween design just for you and all free, its a sweet remix of the gituar pick holder skull which is legit because you could paper cards or other things to be picked up or what…
The knocker fits for the standard Ø58 Sage/ Breville portafilter. It is to be mounted to the portafilter via bayonet closure. It should be printed of FLEX/ TPU to ensure the damping function when knocking off the puck. For printing the…
Simple coffee knocker with a removable tray and knocker piece, as well as places to attach anti-slip pads. I printed those in TPU (Simple 10mm x 10mm x 5mm pieces). The tray slides out so you can empty it, with the knocker also removable…
A unique 3D printable creation — this Gargoyle Door Knocker Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
A unique 3D printable creation — this Gargoyle Door Knocker Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
A unique 3D printable creation — this Gargoyle Door Knocker Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
This is a print in place, ratcheting handle that makes turning the grounds knocker on a Timemore 078 a little easier. Simply slide the printed part onto the original ground knocker. The friction fit is all that's needed.
This ornate lion head door knocker model features a bold sculpted lion face framed within a circular decorative plate. Flowing mane details, pronounced facial features, and a large ring knocker create a strong architectural statement…
Requires organic supports, takes about 2-3 mins with some cutters to remove the support and break apart and loosen up the chains ready for use. I used auto- tree support option.
Gargoyle Door Knocker. Decorative : non-functioning knocker.
