Search results: law

Sort order

1,808 models

P
PrintablesPrintical

Flexi Sloth - Hook Claws for Hanging!

>> UPDATED VERSION OF THE SLOTH AVAILABLE HERE << The Flexi sloth with hooked claws - hang it from a plant or a string! Or just let it sloth around, your choice. It's adorable both ways. The claws can be snapped into place. The face has…

Downloads
19,797
Likes
6,561
Rating
4.93
P
Printablesmaxwxyz

Screw Claw for Screwdriver and Bits

Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…

Downloads
4,365
Likes
1,816
Rating
4.86
P
PrintablesRetron Print

Tomislaw Apoloniusz Curus Bachleda Farrell

This is Minifigure of "Tomislaw Apoloniusz Curus Bachleda Farrell". A famous Kurvinox character from legendary "Kapitan Bomba" show made by Bartosz Walaszek. You have two ways of printing it: You can print it as parts and glue them…

Downloads
2,025
Likes
110
Rating
5
P
Printablesh0rsty

Bike Beer Clip for 330 ml Cans can claw

This model is used to hold a 330 ml can on bicycle bottle cages.

Downloads
1,514
Likes
127
Rating
4.92
P

Lawnmower Blade Balancer

3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…

Downloads
1,224
Likes
96
Rating
4.5
P
Printablesdjkirkendall

Snailien (snail-alien xenomorph mashup) lawn ornament

This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…

Downloads
1,105
Likes
162
Rating
5
P
PrintablesSushy

Wolverine claws for kids

My 6 year old wanted these for qite some time and there was not any nice model so i made him (pretty) safe pair that should not break easily. Should be printed with supports under claws, placed on the flat part. No post processing needed.…

Downloads
767
Likes
47
Rating
5
P
Printablestechfreek

Ego Lawn Mower Bag Holder

I wanted a way to hang up the bag for my ego mower when I wasn't using it. I didn't find anything online/would work with the pegboard I had, so I came up with this. The top is angled out because I don't have much space above where I…

Downloads
513
Likes
93
Rating
4.8
P
PrintablesRobert Lacina

VITULUS robotic lawn mower

VITULUS is mostly printed mobile robot based on ROS. Visit https://lacina.dev or https://discord.gg/YqeNV5hEVN for more. You can see assembly of currently published parts in zipped .step file. Parts Wheel…

Downloads
458
Likes
152
Rating
5
P
PrintablesMrHegger

Claw Clip Thermoformed and MMU Painted

Introduction Do you have a woman in your life? Does she have hair? Or maybe you are your self are a person with hair. Then do we have the thing for you! Here we have an outstandingly modelled claw clip that holds hair all day long! And…

Downloads
436
Likes
133
Rating
5

Filawhackers: mini 3D printable Boomwhackers

How to print: Quick summary: Material: PLA (I recommend not using silk filament) Print using vase mode or spiralize 0.5mm line width 0.3mm layer height 0 bottom layers 0s minimum layer time Print all parts seperately Choose the right…

Downloads
396
Likes
106
Rating
0
P
PrintablesKen Levasseur

DeWalt Lawn Mower Key

My DeWalt lawn mower has a safety key. I've attached it to the mower with some string but wanted to print a backup in case the original key gets lost. To avoid having supports in the small grooves in the key (which are necessary), print…

Downloads
312
Likes
16
Rating
5
P
PrintablesPeter Farell

Elk Skull Claw Beast

Elk Skull Claw Beast

Downloads
217
Likes
108
Rating
0
P
PrintablesHampusbjork

QYSEA FIFISH V6 Claw for Robotic Arm

More or less 1:1 model of claws for Fifish robotic arm. .OBJ file is here as well so we can modify them to get even more useful tools to use. After printing I recommend drilling the 4mm holes with a 4mm drill just to keep it a tight fit.…

Downloads
215
Likes
35
Rating
5
P
PrintablesZachryWD

Mother NLAW

Mother NLAW is one of the ordained liberators to the Ukrainian people. As with Saint Javelin, her mission is to free Ukrainian lands of armor brought by the invaders. The included .gcode was used to achieve the print result as shown.…

Downloads
208
Likes
42
Rating
0
P
PrintablesPeter Farell

Motherless by George Lawson

Fixed and sculpted some details that got washed out during clean up. "Motherless by George Lawson" (https://skfb.ly/oJ7PE) by Vision Fountain is licensed under CC Attribution-NonCommercial-ShareAlike…

Downloads
160
Likes
30
Rating
0
P
PrintablesPeter Farell

Nix : Star Wars Outlaws

Nix : Star Wars Outlaws Created with Tripo (Free version) Photo to 3d Model. Texture application used upsclaed and refined Pic with Illara Upscaler (hugging face).. BLender - Cleand up mesh in edit mode (merge by distance, fill holes =…

Downloads
143
Likes
27
Rating
5
P
PrintablesDinther

High-res claw Phone Holder

After a lot of sculpting in blender I ended up with this result. A claw that presents your precious mobile phone. Or other items of course. Some fingers are cut underneath to help form a stable platform. It's a long print at 0.15 layer…

Downloads
131
Likes
42
Rating
0
P
PrintablesWolvie

Velociraptor Claws Scratcher

I created my Velociraptor Claws Scratcher for everyone, who like Dinosaurs and need stylish Scratcher :-) I tried to design my new model like funny and useful tool, to can scratch on too far places, like back. I took a one original model…

Downloads
109
Likes
39
Rating
0
P
PrintablesGymRBK

Ring:Bit Car claw / chňapák pro Ring:Bit Car

CZ (EN version follows): Na školním RoboKroužku si naše děti hrají s Elecfreaks Ring:Bit Car . Pro naše hrátky by se občas hodil “chňapák”. Chtělo to něco s minimem součástek, snadno tisknutelné, co by děti dokázaly bez potíží sestavit.…

Downloads
108
Likes
10
Rating
5

Duplo Backhoe Claw

This a claw for a Duplo Backhoe used in models such as 3272, 3295, and 3295. It is not an exact reproduction, as I am missing the claw in question; thus this model. However it fits well and can scoop a 2 by 2 block. It can be printed in…

Downloads
107
Likes
37
Rating
0
P
PrintablesMorpheus61

Lawnnail for magnet barrier (Worx)

Just a quick redraw inspired by the design of the Worx magnet barrier for Landroid Automowers Printed in PETG, laying on the side with bed supports for more strength in direction of force (holding down the magnet band) 20% Infill, 0.3mm…

Downloads
96
Likes
13
Rating
5
P
PrintablesCrossman

Lawn Dart Fins / Lawn Javelin Fins

USE AT YOUR OWN RISK These are fins that are designed to fit a 4' fiberglass garden stake so you can recreate a large version of lawn darts or lawn javelins for a backyard game. The fins in the picture were printed on a Creality Ender 3…

Downloads
79
Likes
4
Rating
0
P
PrintablesBen

VIFLY/other strobe mount for DJI/other drones (under 1g for 250g drone laws)

A simple slide to lock in connector for mounting VIFLY strobes to any drone including DJI <250g models. Use double sided tape to connect the light top to a flat section on the strobe (battery side etc) and the light bottom to a flat…

Downloads
77
Likes
10
Rating
5
P
PrintablesSTL_Creations

Lawn Mower Deck Wheel

Replacement wheel for lawn mower deck Outside Diameter = 98.8mm Inside Hole Diameter = 12.2mm Wheel Width (ground contact width) = 50mm 282 Grams Designed to fit " Craftsman ZTS 7500 " 50-inch Deck

Downloads
74
Likes
6
Rating
0
P
PrintablesLuc Dunn

Ninja Hand Claw Scratcher

Pets or annoying loved ones need scratching so often it makes your hands tired? Do it the Ninja way, and put a set of claws on your hands instead. Saves those tired forearm muscles! Have a little Ninja-in-training who keeps tearing up…

Downloads
49
Likes
14
Rating
5
P
PrintablesKarpo

LEGO (LEGO compatible) Granade Launcher M72 LAW #0011

LEGO compatible Granade Launcher Based on M72 LAW designed to fit in a minifigure hand. I printed it in Zortax Z-ABS 2 because PLA is tend to stringing, but I reccomend to scale up it by 1% or 2% because ABS has a tendency to warp. I…

Downloads
48
Likes
6
Rating
0
P
PrintablesJCote

Cartoni Spreader Claw (Endpiece) Replacement

Replacement part (P50 SPREADER CLAW (P750)) for a Cartoni Smart Lock mid-level tripod spreader (S731/SL). Intended for when one of the “claw” bits on the original breaks, and you only need the main part replaced. ADDITIONAL PARTS NEEDED :…

Downloads
28
Likes
2
Rating
0
P
PrintablesJoe

Gridfinity Refined Pry Tool Holder, 12" Stanley Wonderbar and ESTWING Pro Claw Nail Puller - 9"

This set is (2x9 - 2x4 + 2x5) will hold (1x) 12" Stanley Wonderbar and (1x) ESTWING Pro Claw Nail Puller - 9" Each half holds 1 tool, so a person could mix and match with other tools. made from my flat bins here . The geometry for the…

Downloads
22
Likes
6
Rating
5
P
PrintablesJosef Drapák

Koncovka lanka pro motorovou sekačku / Cord end for lawn mower

Výplň 100%, na výšku, podpěry všude. Materiál PETG. Pasuje na trubku průměru 22,2 mm, upevňovací otvor průměr 6 mm.

Downloads
17
Likes
4
Rating
5
P
PrintablesL7899

Husqvarna 532121232 spindle cap for ride-on lawnmower

Spindle cap for multiple makes of lawnmowers. Since this part is still available commercially, I own nothing and claim nothing and forbid commercial use. Use this as a temporary solution. Printed in PETG.

Downloads
14
Likes
2
Rating
0
P
Printablesh2odragon

Lawn Chair Air sign

100x160mm sign, reading “Lawn Chair Air: travel cheap” with art of a person being lofted by balloons tied to a chair. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in…

Downloads
7
Likes
1
Rating
0
P
PrintablesREMLURELMI

Lawnmower Wheel Bushing

I made this as a 3D printing optimized bushing to replace a failed bearing on a Kobalt 80V mower (walk-behind). Features: Press-on, press-in fit for axle and wheel. Grease holes (hexagonally shaped to avoid the need for supports)…

Downloads
1
Likes
0
Rating
0
P
PrintablesCisco3D

Claw 2 Print in Place Toy

How long can you go... New Toy with options 3, 4, 5, 8 or 10 arms long. Print in Place so You Print & Play. Use a 3, 4 or 5 arm for a working toy. The 8 and 10 arms has too much friction wh printing with PLA TIP: Needs a tiny bit of…

Downloads
24,575
Likes
3,770
Rating
4.66
P
PrintablesTinkerMAN

Plastic Lawn Chair

I couldn't find a decent model of a Lawn chair on Printables. Thought I'd share on here! I used my Bambu Lab P1P with .2mm nozzle and .1mm layer lines. I cranked this baby to 100% infill because the model is so thin anyways. I also used…

Downloads
11,814
Likes
2,411
Rating
4.63
P
Printablessoozafone

Grabby the Claw - a quick calibration test for 3D printed action figures!

Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…

Downloads
11,095
Likes
2,415
Rating
4.94
P
PrintablesRedfully

Fidget Mini Claw Machine

Meet the Mini Claw Machine , a tiny 3D printed claw toy designed to be built in just two pieces: the main structure with the claws and internal spring, plus the rod that connects everything and makes it work. Once assembled, simply push…

Downloads
6,347
Likes
1,194
Rating
4.87
P
Printablesnerdyviews

Wolverine Claws

I know other models exist, but nearly all of them have a lip on the top which goes over the knuckle. I'm more fond of the design where the claw just comes out between the knuckles, so I made this. Just plug the blades into the grip and…

Downloads
4,799
Likes
913
Rating
5
P
PrintablesArea 55 Labs

Wolverine Claws for Cosplay

Wolverine claws for cosplay or display. Only one claw file. Placement on hand determined by how far forward the claw is on the handle. Recommend testing fitting each claw one at a time starting with the middle claw. July 2024: Added more…

Downloads
4,319
Likes
334
Rating
4.6
P
PrintablesDiogo Lemonhead

Dummy 13 Wolverine Claws

And now Dummy 13 is also a Weapon X.

Downloads
4,267
Likes
786
Rating
3.2
P
PrintablesCap'n Corny

Dummy 13 Power Claw w/ "Knuckle Dusters"

What started out as a new version of the Blaster Arms ended up becoming a Power Claw, crazy how lack of focus and random prototyping works, aye? The claw takes a bit of extra force to get onto the arm immediately after printing; it…

Downloads
4,138
Likes
1,003
Rating
4.85
P
PrintablesSpace Buck

Claw Ring Remix

At the provided scale, the inner diameter of the claw is 10mm. Scale it up to fit your use case. To make a thumb claw, I also scaled the model down in the Z direction so it would be stumpier. Normally I would provide a source file so you…

Downloads
3,894
Likes
995
Rating
5
P
PrintablesPrinted Bits

White lawn chair

Classic lawn chair 1/12 scale as always. There are two ways of printing this model First to print the whole thing in one piece using supports Beware removing supports might be difficult, legs could break Second way is to print it in two…

Downloads
3,675
Likes
754
Rating
4.93
P
PrintablesFH

Mechanical Crane Claw

Print Instructions Print the parts as listed down below. All STL files are in their respective print orientation! I used the default 0.20 mm QUALITY preset on an Original Prusa MINI+. Bucket Segment Activate 'brim' and consider decreasing…

Downloads
2,995
Likes
1,357
Rating
4.83
P
PrintablesSpike Mix

Wolverine Claws with grip

The model is to be printed in 4 parts: 3 claws and the grip, and then assembled and glued. Consider the horizontal expansion setting in your printer to make the parts fit. Dimensions are 21 cm long and 6,5 cm wide. To legally sell PRINTED…

Downloads
2,638
Likes
737
Rating
4.33
P
PrintablesEdgar.A

Modular hair claw clip V3

Here is a modular hair claw clip with 3 different claw. The system is very simply. Improvement: With V3, you don't need support on the clamp, and you still need it on the clip.(in prusaslicer you should set the overhang threshold to 35…

Downloads
2,583
Likes
579
Rating
2.77
P
PrintablesIrahzu Penumbra

Finger Claw - New Update 1-8-24

Little finger claws for funsies! Use with caution as it can be sharp. Not intended for children under 12. May cause injury. ---------------------------------------------------- V2 IS NOW INCLUDED AND FREE!!!!!…

Downloads
2,528
Likes
506
Rating
4.6
P
PrintablesMarkus

Hogwarts House Crests Gryffindor Slytherin Hufflepuff Ravenclaw

This is a Version of cncmodels4you 's hogwarts house crests found on Thingiverse https://www.thingiverse.com/thing:4541930/files I painted them in Prusaslicer with a lot of detail.

Downloads
2,397
Likes
335
Rating
5
P
PrintablesCisco3D

Claw Toy

For the little ones... Hehehe, it's really for me! An Open Source Project - Fusion360 File Available! Print instructions Just Print Snap and Play Use the extra arm g-code file to make it longer

Downloads
2,361
Likes
441
Rating
4.65
P
PrintablesAFO3D

Hair Claw Clip (Print-In-Place) - Version 4

If you want to print something for your wife, mother, sister, someone with long hair that maybe needs it, or yourself. Well here you have it, a nice print in place hair claw clip, no need for springs, bolts or other materials, just print…

Downloads
2,233
Likes
285
Rating
4
P
PrintablesBudwin

Red Hood Outlaw Inspired Mask

Red Hood Outlaw Inspired Mask Enjoy Category: 3D Printing

Downloads
2,208
Likes
281
Rating
5
P
PrintablesBilliam

Alan Grant's Raptor Claw (with alignment pins)

Scaled the original part up a bunch to save a step, and added 3 holes to use for alignment. Print two copies, one mirrored. Remixed From: Alan Grant's Raptor Claw by SagaWorkshop Print instructions Cut three small pieces of filament,…

Downloads
2,085
Likes
281
Rating
4.75
P
PrintablesTioh

Fursuit finger claw

I made this claw model for a cat fursuit. The holes are meant to be used for sewing the claw to the glove. Adjust the size for each finger before 3d-printing. Print with a flexible material like TPU.

Downloads
1,798
Likes
251
Rating
5
P
PrintablesMZ4250

Oh Lawd He Comin Red Dragon

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
1,784
Likes
534
Rating
4.5
P
PrintablesProtopasta

Raptor Claw

We really dug into the Jurassic Park theme this 3D Printopia, formerly known as ERRF. CM Designs created an iconic prop, the raptor claw. The filament colors were included with the latest Protopasta Filament Subscription. Subscribe to…

Downloads
1,780
Likes
251
Rating
4.82
P
PrintablesYaUMamyInzhener

Skyrim Dragon Claw [improved printability]

I flattened the base of the claw for better adhesion, and re-oriented it to remove the need for supports. PS The symbols on the Gold claw are not correct. They are actually for the Emerald Claw. - thanks to TacoScientist for pointing that…

Downloads
1,721
Likes
363
Rating
4.94
P
PrintablesMatěj V.

Simple Wolverine's claws (Wolverine)

Sorry for the wrong files last time. Now it should fit a 235 x 235 mm build plate. I would recommend gluing the center rod in place to keep everything from spinning. It's made for cosplay only.

Downloads
1,546
Likes
131
Rating
5
P

Extending claws

Here's the V7 of my wearable set of claws, that extend/retract with your fingers movement. The ZIP file contains a wide range of sizes and a few variants, allowing for a good fit (hopefully) for most users.

Downloads
1,474
Likes
680
Rating
4.75
P
PrintablesJMoto84

MONSTER ENERGY Claw Keychain/Key Tag

2-colour Monster claw keychain.

Downloads
1,457
Likes
158
Rating
5

Lawn Dart Fin

Replicated lawn dart fin for people who are trying to relive their childhood. Print instructions I did use 50% infill; Concentric Concentric Top/Bottom infill Size:102% Could Print with PETG or PLA PLA setting: 215 Hotend; 60 Bed temps;…

Downloads
1,404
Likes
41
Rating
5
P
PrintablesChristianR

Claw grabber

You need 6x “Link”, 6x “Shovel” and 2x “Spyder”. All parts screw together with M3 bolts and lock nuts. Don't tighten them to hard, the joints have to move freely. Attach a string to each Spyder parts. Thread the string from the lower…

Downloads
1,344
Likes
183
Rating
4.5
P
PrintablesPrintedByMark

Clawstrider from Horizon Forbidden West

Introducing the the Clawstrider from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece for stability. All credit for character design goes to…

Downloads
1,343
Likes
196
Rating
0

Alan Grant's Raptor Claw (Whole)

I remixed the scaled remix to print this model whole, vertically. It turned out beautiful, so I wanted to share it. No assembly necessary! Due to the remix having pin holes, this model still had those internally but it doesn't affect…

Downloads
1,321
Likes
265
Rating
5
P
Printablesakmiller01

Simple Claude Code Mascot - Clawd

A simple render of the Claude Code mascot, Clawd. If you print clawd.stl, you can change the color of the eyes with a simple filament change; otherwise clawd_singlecolor.stl has the eyes embossed.

Downloads
1,276
Likes
56
Rating
5
P
PrintablesTomas

Claw (scissor)

Fun tool for short hands :)

Downloads
1,251
Likes
135
Rating
4
P
PrintablesDaemonfly

Jart / Lawn Dart fins

Coworker needed replacement fins for his lawn darts. The ones I could find weren't ideal for his specific model so I created these. I believe his was one of the "Jart" brand models. Printed this in 95A TPU and it worked great (with fin…

Downloads
1,246
Likes
42
Rating
0
P
Printablesguillermytho

Claws Bookmark

Update 18/11/2022 Thank you all for sharing, printing and enjoying this humble print. As I found that many removed the logo, I took it off and uploaded a bookmark. I also added a longest version, for those that need something over 10 cm…

Downloads
1,189
Likes
155
Rating
4.71
P
PrintablesTorsten B

Rapsodo Callaway RPT golf ball stencil

I used the Golf Ball Marker Template from Thingiverse (https://www.thingiverse.com/thing:3830902/files) an added the RPT pattern from the Original Callaway to it. For best fitting i had to scale to 101% maybe for your Printer you have to…

Downloads
1,134
Likes
79
Rating
5
P
Printablespix3l8e

Ohm's Law Circle Cheat Sheet - Electronics

Handy Cheat Sheet for calculating Volts, Amperes, Watts and Ohms using just two variables. Fusion360 design added for you to improve upon. Please share your feedback and comments :-)

Downloads
1,114
Likes
468
Rating
4.92
P
PrintablesCam Wallace

Dummy 13 Claws

This is a model I designed to let people have a chance to make claws for a dummy 13

Downloads
1,101
Likes
253
Rating
5
P
PrintablesAFO3D

Hair Claw Clip Redesigned

PRINT-IN-PLACE HAR CLAW CLIP This is the perfect gift for your mum this Mother's Day, it's not a remix, it's a complete redesign from my previous hair clip. It works better and the smaller version prints great. FOR THE LARGE MODEL YOU…

Downloads
1,073
Likes
131
Rating
1
P
PrintablesJoel

Rasengitter für Mähroboter / lawn grid for robot lawn mower

We bought a robot lawn mower back then, but after about a year of use, it started digging deep holes in the lawn. Due to our winding garden, there were many places where the robot had to turn on the spot. Due to the deep holes, he always…

Downloads
1,029
Likes
108
Rating
4.86
P
PrintablesGoatGamez

Larry & Lawrie - Brawl Stars

Larry sells tickets to Starr Park visitors under the watchful eye of his twin, Lawrie. Larry loves rules, they make life easier! Lawrie doesn't love rules so much as enforcing them. They make a good team.

Downloads
1,011
Likes
31
Rating
0
P
PrintablesMojo Doodles

Lawn mower gas tank cap

inside diameter 48mm

Downloads
973
Likes
73
Rating
4.88
P
PrintablesDsK_Printing

Finger Claw

Just a random finger claw. Designed for: Inner diameter: 18mm finger lenght max.: 75mm Printed with 30% infill and brim. No support needed.

Downloads
969
Likes
265
Rating
5
P
PrintablesRedCowl

Dart Zone Outlaw Replacement Cylinder

To build this - you will need one of each of these parts that are included (Choose one of the cylinders that is included) - along with a Bic Pencil spring (the ones that are hexagonal and look like this:) , and a toy screw or 4-40 x 3/8in…

Downloads
960
Likes
143
Rating
4.95

Black Ram Hand - MVII (Large Claw)

This Black Ram Hand was designed to be BIG. It is entirely 3D printable including the bolts and nuts. Use it to grab and pick up huge items without skin/hand contact. 50% larger than the size of the Mark V, its can be attached to your…

Downloads
951
Likes
361
Rating
5
P
PrintablesTreyvn

Lawnmower pull start handle

a print friendly replacement to your pull start lawnmower. My dog chewed mine up so i had to replace it. I havent printed yet cause i havent printed in ABS or PETG yet. if you print let me know how it works and if anything should be…

Downloads
944
Likes
56
Rating
5
P
PrintablesCarlos 3D

Collapsible Wolverine Claws

I have designed this version inspired by swords and other retractable models. I have noticed that depending on the filament the performance may vary. For example with PLA+ from Sunlu I have better results than with CosPLA from Polymaker.…

Downloads
943
Likes
349
Rating
5
P
Printableslutorm

Garage for Mammotion Luba lawmowing robot

Update : Version 1, printed in PETG, broke when it sagged and the Luba backed into it. Version 2 is easier to print since most pieces lie flat, but the number of parts went up to 8. It's also slightly larger than v1 so cover the Luba a…

Downloads
929
Likes
59
Rating
0
P
PrintablesPrintedByMark

Fireclaw from Horizon Zero Dawn

Introducing the Fireclaw from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 100mm base. Use with the Fireclaw expansion during gameplay for the 4-legged stance. It is intended to be printed in…

Downloads
912
Likes
131
Rating
0

Replica Grizzly Bear Claw

Has a flat side to print standing up as pictured. Scale to desired size. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Downloads
875
Likes
161
Rating
5
P
Printablesmt_benno

Deathclaw from Fallout 4 (loading screen pose)

I've included a low poly version that was ripped straight from the game files and a subdivided version.

Downloads
871
Likes
124
Rating
5
P
Printablesvivamus3d

BRILL/ALKO Lawn Mower Gear Pinion (Sperritzel)

My good old lawn mower (push-mower BRILL RazorCut Premium 38) didn't work any more properly, because one of the gear pinions (Sperrritzel) was a bit worn and the wheel didn't drive the spindel reliable any more - it stopped every now and…

Downloads
855
Likes
10
Rating
0
P
PrintablesNocebo

Vector Concept Robot ARM CLAW (standard servo)

You need only a good 3D printer and 8x 3mm screws.

Downloads
849
Likes
113
Rating
0
P
PrintablesComrade_Zach

Clawfoot bathtub (soap holder)

This model is a lightly remixed version of the model I found from Natalia Mona Tj over on GrabCad. (https://grabcad.com/library/clawfoot-bathtub-claw-foot-bath-tub) I scaled it down and beefed up the legs for strength, trimmed some…

Downloads
793
Likes
125
Rating
5
P
PrintablesMian0109

Gardening gloves with claws

Recently I bought my mum gloves with claws for the care of flowers in the garden but the available size was too big. So i decide to use 3D printing, to solve this problem and now the claws allow for comfortable work. After dealing with…

Downloads
789
Likes
208
Rating
5
P
PrintablesKokoBandit

Lawn Mower Blade Balancer

This is a remix to address some issues I had with the original design. Printing info: PLA 0.4mm nozzle 0.20mm layer height 15% infill [UPDATE 6/22/2026] Per request, here are the diameters for the steps on the original model as posted.…

Downloads
787
Likes
67
Rating
4.92
P
PrintablesChristoph

Replacement Wheel for Gardena R40Li robotic lawnmower

The original rubber came loose so we needed a replacement. It fits on the original tyre and can be screwed in place with the existing mounting holes. Printing: We used three walls and 20% infill with a layerheight of 0.3mm. For testing…

Downloads
780
Likes
61
Rating
5
P
Printablescjs_3dp

Allosaurus fragilis Claw

From the Smithsonian 3D Digitization library, I have converted the mesh to STL in Blender. Print with supports with the base of the claw near the build plate, point of the claw straight up. 1:1 Allosaurus fragilis Marsh, 1877: Claw…

Downloads
767
Likes
265
Rating
5
P
PrintablesTarik EL hamdi

Infernal Claw Mug – Devil's Grasp

Infernal Claw Mug – A demonic 3D printable coffee mug straight from the depths of Hell! This striking mug features a massive demonic claw aggressively gripping a clean cylindrical cup. The devil's hand emerges with sharp, twisted talons,…

Downloads
744
Likes
173
Rating
5
P
PrintablesCap'n Corny

Carbon/Dummy 13 - Power Claw REMASTERED!

Finally, I can fix the biggest problem with the original claw! Some people said they had issues printing the original claw fully upright since the joint might snap off due to the print lines. Not anymore! I went back and refined the…

Downloads
743
Likes
210
Rating
5
P
PrintablesTomTom

CNC Clamp / Clamping Claws M6

Clamping Claw in two sizes with M6 thread for a CNC my recommendation: -> petg -> 250/70 degrees celsius

Downloads
736
Likes
116
Rating
5
P
PrintablesGhostcat3-D

Wolverine claws for Dummy 13

A awsome pair of claws for Dummy 13.

Downloads
732
Likes
150
Rating
5
P
PrintablesMint

9g Servo Claw

Why? I wanted to make a claw using this model and I learned it was made originally for a laser cutter. I have spent many hours perfecting this for a 3D printing. What is needed? You can either print the Claw.stl or print the following: 4…

Downloads
722
Likes
48
Rating
4.67
P
PrintablesTheVigil

Snack Claw

A tool for eating while multitasking. Eat chips, fries, or anything else without getting any on your hands. Perfect for snacking while gaming without worrying about Dorito dust on your controller or keyboard.

Downloads
720
Likes
41
Rating
5
P
PrintablesLucas Kranz

Harry potter Ravenclaw crest bookmark

Print it flat on the print bed whitout supports

Downloads
718
Likes
91
Rating
4.75
P
PrintablesM D

Lawnmower Drive Handle Spare (MacAllister MLMP1600)

The original injection molded handle for the MacAllistar MLMP1600 Lawnmower is far too flimsy and is prone to splitting near its pivot point. (See image of blue handle) It was impossible to find a spare online so I decided to model it…

Downloads
706
Likes
21
Rating
5
P
PrintablesPrintedByMark

Frostclaw from Horizon Zero Dawn

Introducing the Frostclaw from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. Use with the Frozen Wilds expansion during gameplay for a cosmetic 2 legged stance. It is intended to be…

Downloads
689
Likes
116
Rating
0
P
PrintablesBrayden Adler

Robotic Claw for Servo motor

I'm using my design for FTC 2022 and it works great, + it's light.

Downloads
688
Likes
25
Rating
5