Search results: led

Sort order

21,216 models

P
PrintablesSneaks

Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options

Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…

Downloads
22,705
Likes
5,392
Rating
4.92
P
Printablesmatveymoo

Huge (Curled up) Friendly Articulated Slug

This is a curled up version of the fabulous Friendly Articulated Slug designed by Isaiah Steckling ( Printables , Thingiverse ). It is intended to print large and really huge slugs. For normal size slugs you can use the original model.…

Downloads
11,591
Likes
1,957
Rating
4.87
P
PrintablesAllpa

Mini-LED-Christmas-Tree (Vase Mode) // Mini-LED-Weihnachtsbaum (Vasen-Modus)

It's time for the first Christmas decorations of the year. With this mini Christmas tree for the shelf, windowsill or desk, the first Christmas spirit will come. The tree with its base plate fits exactly over an LED tea light, so that it…

Downloads
10,429
Likes
2,397
Rating
4.94
P
PrintablesLuKowalski

LED-Strip soldering tool for 8, 10, 12 and 14 mm wide LED strips

Sometimes it's necessary to solder wires directly to LED stripes instead of using connector plugs. I'm using this tools especially to make connections if I use the LED stripes in wet or damp environments to prevent the contacts from…

Downloads
10,184
Likes
7,376
Rating
4.9
P
PrintablesMiguel M.

LED Strip Clip

LED strip clip. Simple and works very well. Screws on one side only, so very compact. fits 10mm strips. Do not attempt to print on its side, screw will split the layers and crack the print….. I printed 24 of these all at once with no…

Downloads
9,177
Likes
4,228
Rating
4.84
P
PrintablesIn3DSpace

LED Light Bar Prusa i3 MK2/MK3

Light bar for the Prusa i3 MK2/S and MK3/S/+ available in single light, dual light, and MMU2 compatible dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires…

Downloads
8,694
Likes
2,694
Rating
4.95
P
PrintablesCAD-Guy

Stackable & labeled beer crate for batteries

Stackable and now also with labels: beer crate for batterie and accumulator storage. The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries These crates are to 100% compatible to my original files. The Bottom is universal,…

Downloads
7,484
Likes
1,473
Rating
4.9
P
PrintablesMiroslav Faist

Empire State Building (SKYSCRAPER) - detailed model

Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.

Downloads
5,811
Likes
342
Rating
4.89
P
PrintablesKirby Downey

Detailed AT-AT from Star Wars Scale 1:75

This is latest model I have created. This detailed AT-AT from Star Wars has 15 points of articulation and show cases the interior of the machine. It consists of almost 70 parts and can be assembled without glue. The head and body had a M5…

Downloads
5,748
Likes
2,397
Rating
4.88
P
PrintablesAlexMu

Intex Bestway nozzle angled design for a clean pool

with this nozzle you get circular flow in the pool instead of just straight in. It helps to keep the pool clean.

Downloads
5,533
Likes
618
Rating
4.91

Funny Cartoon Christmas Candle ( no 1 of 4) ( Now also With LED Support)

This is the first of four Cartoon-Style Christmas Candles, that you can use for your christmas decorations! NEW: I have added new Variants, including A Smaller Version, and Support vor Electric Tealight Candles. Here are the Models which…

Downloads
5,494
Likes
1,382
Rating
4.94
P
PrintablesNight Raid
18+

The source marked this model as adult content.

Downloads
4,937
Likes
1,085
Rating
4.88
P
PrintablesSalut

Makita 18V Akkuhalterung angewinkelt / Makita 18V battery holder angled

Hier haben wir eine Wandhalterung für 18V Makita Akkus in der angewinkelten Version. Durch die angewinkelte Halterung lassen sich die Akkus angenehmer einlegen und entnehmen als bei den normalen geraden Versionen. Es sind Versionen für…

Downloads
4,896
Likes
444
Rating
4.97
P
PrintablesTinkrMakr

Knurled Container Modular Threaded Stackable

Knurled Modular Threaded Stackable Container. 100mm outside diameter. 20mm, 40mm, & 60mm side wall height containers (with bottom) and expanders (without bottom). Top and bottom can be used to make a 40mm tall container. 3mm walls. Print…

Downloads
4,791
Likes
887
Rating
4.94
P
PrintablesNat

Hexes for LEGO mini figures (re-modeled)

After printing hundreds of originals, I decided to re-model it myself to make some small tweaks and changes. The original OpenSCAD code resulted in slightly misaligned tolerances, needing the tolerance to need to be set higher than…

Downloads
4,735
Likes
1,723
Rating
4.9
P
PrintablesMetikumi

Beautiful Gold Coin, Detailed but Easy to Print

I designed this coin for games and as decoration for gifts. The coin has large details to be printed with most filaments. Also, they are placed so the coin can be easily printed without support. Use single coins as a gift wrap decoration,…

Downloads
3,772
Likes
424
Rating
4.84
P
PrintablesIn3DSpace

LED Light Bar Prusa MK4

Light bar for the Prusa MK4 available in single and dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…

Downloads
3,472
Likes
1,319
Rating
4.89

Funny Cartoon Christmas Candle ( no 3 of 4) ( Now also With LED Support)

This is the third of four Cartoon-Style Christmas Candles, that you can use for your christmas decorations! I Hope you like "Grumpy, the Candle" :-) NEW: I have added new Variants, including A Smaller Version, and Support vor Electric…

Downloads
3,200
Likes
546
Rating
4.97

Funny Cartoon Christmas Candle ( no 2 of 4) ( Now also With LED Support)

This is the second of four Cartoon-Style Christmas Candles, that you can use for your christmas decorations! NEW: I have added new Variants, including A Smaller Version, and Support vor Electric Tealight Candles. Here are the Models which…

Downloads
3,162
Likes
603
Rating
5
P
Printablesyahbluez

Moon Lamp LED Tealight

TL;DR A little fast printable moon lamp cover to put over a cheap LED-Tea-Light. Mentioned on YouTube: Many thanks to Chris for presenting the model in his nice channel. More stuff for IKEA moon fans:…

Downloads
3,094
Likes
518
Rating
4.79
P
PrintablesPeter Farell

Nativity Swaddled Baby Jesus and Manger Set

Swaddled Baby Jesus and Manger Set Like the manger. The Baby Jesus is so so.

Downloads
3,058
Likes
447
Rating
4.38

Funny Cartoon Christmas Candle ( no 4 of 4) ( Now also With LED Support)

Finally, here is the fourth Cartoon-Style Christmas Candles, that you can use for your christmas decorations! Now the Set is complete :-) NEW: I have added new Variants, including A Smaller Version, and Support vor Electric Tealight…

Downloads
2,768
Likes
501
Rating
5
P
PrintablesUpstateDesigns

Simple Beveled Ring

I would love to see everybody's remixes. The inside diameter is: 20mm The outside diameter is: 25mm I've uploaded the FreeCad file so its easier for you to edit the ring size. Print settings: I wouldn't recommend Prusa slicer for this…

Downloads
2,754
Likes
372
Rating
4.93
P
PrintablesIn3DSpace

Single LED Light Bar Prusa i3 MK2/MK3

Single light bar for the Prusa i3 MK2/S and MK3/S/+. Mounts attach to the hexagonal holes in the z-axis tops. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of…

Downloads
2,672
Likes
531
Rating
4.95
P

Pawn Chess detailed

This is a model of a detailed chess Pawn. I have also models for the Chess Pieces.

Downloads
2,426
Likes
67
Rating
5
P
Printablesmkoistinen

"8-Bit" Minecraft Diamond Ore Lamp - Siri Enabled!

I've seen other Minecraft diamond ore lamps in various places by they all seem to lack the definitive pixelation that Minecraft embraces. By leveraging techniques used from 3D printed lithographs and some of the features of the latest…

Downloads
2,151
Likes
956
Rating
4.82
P
PrintablesHP Robots Otto

Otto DIY Smart OLED robot

Make you robot more visual and animated with this great OLED display you can add it in front of Otto as a mouth to display variables, numbers, messages, sensor values, icons. It could also be adapter as a replacement for your robot eyes.…

Downloads
2,118
Likes
55
Rating
5
P
PrintablesIn3DSpace

LED Light Bar Prusa MINI

Light bar for the Prusa MINI. Mounts are designed to fit 11x24mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look. Mount also includes an opening to insert a…

Downloads
2,046
Likes
927
Rating
4.93
P
PrintablesRetron Print

Tomislaw Apoloniusz Curus Bachleda Farrell

This is Minifigure of "Tomislaw Apoloniusz Curus Bachleda Farrell". A famous Kurvinox character from legendary "Kapitan Bomba" show made by Bartosz Walaszek. You have two ways of printing it: You can print it as parts and glue them…

Downloads
2,025
Likes
110
Rating
5
P
PrintablesAWSW

WordClock 16x16 LED matrix

BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…

Downloads
1,918
Likes
777
Rating
4.94
P

King Chess Piece detailed

This is a model of a detailed chess King. I have also models for the other Chess Pieces and Pawns

Downloads
1,873
Likes
49
Rating
5
P
Printableswoelpi

PC4 drybox feeder with knurled screw-on cap (M10&M6)

I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…

Downloads
1,829
Likes
353
Rating
4.91
P
PrintablesIn3DSpace

MMU2 LED Light Bar Prusa i3 MK2/MK3

Light bar for the Prusa i3 MK2/S and MK3/S/+ compatible with the MMU2/S. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…

Downloads
1,734
Likes
351
Rating
4.92
P
PrintablesAngus B. Clark

(3MF) Poseable Articulated Robot Hand (sorted/scaled)

Decided to add the 3MF for the popular robot hand model by Make-a-print to make printing easier in different colours. Files have been separated according to the original design colours. Two folders of files are available, one for the full…

Downloads
1,705
Likes
543
Rating
4.8
P
PrintablesBig Dutch

Prusa MK4 LED Status Bar Extension

My printers sit on an ikea Kallax shelf which causes the LCD panel to hang over. Since the new MK4 has an awesome LED Status Bar, I did not want to lose out on the feature. Model printed without supports and misses LED and any chips on…

Downloads
1,696
Likes
531
Rating
4.95
P

Queen Chess Piece detailed

This is a model of a detailed chess Queen. I have also models for the other Chess Pieces and Pawns

Downloads
1,625
Likes
54
Rating
5
P
PrintablesEmkatech (Mike)

Knurled Screw Heads for Hex Bolts (M3–M12)

This set includes knurled screw heads designed to fit hex bolts according to ISO 4017 . The bolt length can be freely chosen, giving you maximum flexibility for your projects. The design also accommodates matching washers according to ISO…

Downloads
1,597
Likes
624
Rating
5
P
PrintablesObecovský

Christmas trees -led candle

Very easy to print. Insert the printed trees into the holes. No glue needed. Merry Christmas 🙂 Layer Height: 0.2 Infill: 10% - 20% Supports: No Filament: White PLA or PETG https://makerworld.com/en/models/662696

Downloads
1,595
Likes
440
Rating
4.56
P
PrintablesPrint Eastward

LED Light Pad Power Button Cover

Don't you just hate it when you keep accidentally switching off your light pad? Fear no more, this power button cover will spare your frustrations! This can be printed in place, face down on the bed. Recommended layer height 0.2mm. Pro…

Downloads
1,530
Likes
86
Rating
4.64
P
PrintablesDilem

Detailed octopus with suction cups, articulated, print in place

Instaid of the millionth itteration (or reupload) of McGybeer's (awesome) cute mini octopus I started from scratch and came up with my own articulated print in place octopus. This one has suction cups and a more detailed skin/shape. I…

Downloads
1,482
Likes
169
Rating
4.67
P

Rook Chess Piece detailed

This is a model of a detailed chess Rook. I have also models for the other Chess Pieces and Pawns

Downloads
1,407
Likes
37
Rating
4.89

DESTINY GENERALIST GHOST SHELL FULLY DETAILED 1:1 SCALE

This model it's FREE and part of the upcoming releases as part of a fan made project to create every Ghost from the game as collectibles, please support this project, all this is for purchase filament to keep testing the upcoming updates,…

Downloads
1,378
Likes
350
Rating
4.33
P
PrintablesChris D

Gridfinity - Metric Screw Labeled Bins (M2.5, M3, M4, M5...plus you can mod for others)

Gridfinity - Metric Screw Labeled Bins (M2.5, M3, M4, M5...plus you can mod for others) Bins used for storing small metric screws (M2.5,M3,M4 and M5). If you need other sizes you can simply use prusa slicer to change embossed text based…

Downloads
1,313
Likes
105
Rating
5
P
PrintablesART TOO

ANGLED LEGO Bricks

NEW RELEASE !!! All angles included 15° 30° 45° 60° 75 90° Step files are added in case of tollerance issues Leave a comment if you want/need adjustments

Downloads
1,246
Likes
492
Rating
5
P
PrintablesAdafruit

Zelda: Breath of the Wild – Guardian Sword with NeoPixel LEDs

Read the full guide on: https://learn.adafruit.com/breath-of-the-wild-guardian-sword-led-3d-printed/ This is the Guardian Sword from Zelda, Breath of the Wild. It’s fully 3D Printed and has a ton of NeoPixel LEDs. This thing is super…

Downloads
1,200
Likes
925
Rating
5
P
PrintablesMigueppc

Swimbait Fishing Lure: Detailed Minnow Design, Customizable Assembly

Swimbait Fishing Lure mimicking the appearance of a minnow (lambari). This lure boasts an exceptional level of detail, featuring intricately modeled scales, lifelike fins, and a stunningly accurate gill area. What sets this lure apart is…

Downloads
1,197
Likes
125
Rating
0
P
PrintablesAMPDesignworks

Black Diamond Storm 400 LED Headlamp Latch Replacement (now includes lever too)

My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…

Downloads
1,193
Likes
28
Rating
4.5
P
PrintablesPrusa Research

White LED Strip Add-on Printable Parts

All printable parts for your White LED Strip Add-on. You will also need Basic Board + PSU Add-on, which is shipped automatically with White LED Strip All of the add-ons and community models can be found here . Print instructions You have…

Downloads
1,148
Likes
149
Rating
4.89
P
PrintablesdePrintinator

Gridfinity : Parametric Bottle with Knurled/Fluted Cap

I've created a parametric bottle with a knurled or fluted cap that scales up as large as desired for the Gridfinity system. I've included STLs for some basic sizes, and my Fusion360 Archive file so you can generate your own. I like the…

Downloads
1,107
Likes
262
Rating
4.94
P
Printablesateldsign

Blum Clip Top Concealed Hinges drilling template

These are very simple drilling template for Blum ClipTop concealed hinges. Mark the position, align the notch, drill/mark I have uploaded the two TB distances I generally use (4.5 and 6.0mm) - see drilling diagram

Downloads
1,079
Likes
107
Rating
4.83
P
PrintablesBurgessG

UPDATE: Angled Laptop Stand / Exended Support

UPDATE: As with my original stand, I had issues printing this when the two pieces were not placed on the bed in the exactly the same orientation. (The honeycomb infill would ‘move around’ to get a best fit). In that case my support rods…

Downloads
1,064
Likes
109
Rating
5
P
PrintablesAWSW

WordClock 16x8 LED matrix (2023-V2)

BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…

Downloads
1,055
Likes
286
Rating
4.82
P
PrintablesBP3D

Toilet Flush Lever Repair Kit (Straight & Angled) (American Standard) (No Supports)

All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…

Downloads
1,013
Likes
126
Rating
4.73
P
PrintablesERiK004

Head Creeper Minecraft LED Light / Hlava Creeper Minecraft LED světlo

used these USB LEDs you can buy them here použito tyto USB LED zde je koupíte

Downloads
1,008
Likes
354
Rating
5
P
PrintablesDIY Machines

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone.

3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…

Downloads
1,007
Likes
214
Rating
5
P
PrintablesPrusament

PLA Recycled Self-watering Pot

This is our self-watering pot for you - in typical Prusa-style and printed from PLA Recycled . The flower pot is ideal to grow seeds and herbs beneficial to your health, or you can use it as a small pot for your home flowers. You will…

Downloads
994
Likes
488
Rating
4.91
P
PrintablesJadozub
18+

The source marked this model as adult content.

Downloads
990
Likes
495
Rating
5
P
PrintablesIn3DSpace

Bear Upgrade LED Light Bar Prusa i3 MK2/MK3

NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…

Downloads
985
Likes
197
Rating
4.85
P
PrintablesMKREJ

A working elevator model controlled by the Arduino system

Students will design a functional elevator model controlled by the Arduino system that will transport material (cylinder) to the given floors in the warehouse.

Downloads
951
Likes
152
Rating
5
P
PrintablesCobalt3D

Detailed F-15 Eagle Magnet

Magnet based on the F-15 Eagle. Detailed model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets

Downloads
945
Likes
109
Rating
5
P
PrintablesNils Kal

Prusa i3 LED Lightbar with Filament Guide MK2 / MK3 / MK3S - Single Piece

Here is my design of a Lightbar for the Prusa MK2* & MK3(s). Features: LED's directly powered by the printer Wiring running inside the mount Integrated filament guides for both spool sides On/Off switch Directly wired to the Einsy board…

Downloads
943
Likes
226
Rating
4.75
P
PrintablesCobalt3D

Detailed F-16 Viper Magnet

Magnet based on the F-16 Viper. Detailed model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets.

Downloads
943
Likes
100
Rating
5
P
PrintablesMichaelQ

Knurled Knob for Metric Hexagon Nuts - Parametric

There are already some knurled knobs for hexagon nuts, but no design is parametric and offers you sizes from M2 to M56! The model uses the dimensions according to DIN 934 (see the attached data sheet). A tolerance of 0.5 mm is set for the…

Downloads
919
Likes
261
Rating
5
P

Knight Chess Piece detailed

This is a model of a detailed chess Knight. I have also models for the other Chess Pieces and Pawns

Downloads
906
Likes
39
Rating
4.83
P

Bishop Chess Piece detailed

This is a model of a detailed chess Bishop. I have also models for the other Chess Pieces and Pawns

Downloads
891
Likes
35
Rating
5
P
PrintablesAWSW

WordClock 16x8 LED matrix (2023-V3)

BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…

Downloads
876
Likes
214
Rating
4.96
P
PrintablesRaphael Schaaf

Robust Nerf Sledgefire Shell

Shells for the Nerf Sledgefire blaster that can take a beating. Regular triple shell for Elite darts, single Mega dart shell, shell for a 16mm PVC tube for single Elite darts and a blank shell for anyone that wants to create their own…

Downloads
874
Likes
83
Rating
3.4
P
PrintablesPrusament

PETG Recycled Universal Can Press

A practical model for pressing all sizes of cans. Useful if you want to throw away the cans and save some space in the bin. In many countries, there are collection bins for aluminum waste. Beware, in some countries, it is not advisable to…

Downloads
822
Likes
245
Rating
4.95
P
PrintablesBoBaCool

Knurled thumb knobs for Hex nuts or bolts - M4,6,8 - Boutons moletés pour boulons ou écrous Hex

Knurled thumb knobs for ISO M4, M6 and M8 Hex nuts or bolts. Diam = 18mm, Thickness = 10mm. Printed with PLA, 0.4 nozzle, 0.2 layers and 40% infill. Also included : 3MF containing my preferred custom G-Code and all settings. Updated :…

Downloads
822
Likes
187
Rating
5
P
PrintablesSilor_

Winter themed Lanterns for IKEA LED candles //Ladovská zima - lithophane na led svíčku + PF 2022//

Christmas and Holiday themed tealight lantern lithophane ball. Lantern fits LED tea candle IKEA GODAFTON 4 versions: simple image with NO TEXT: "svicka_panorama.stl" simple image WITH PF2022 TEXT: "svicka_panorama_PF_opr.stl" detailed…

Downloads
814
Likes
218
Rating
5
P
PrintablesRobynthegeek

Crystal tea light LED candle cover

A beautiful cluster of crystals with space to hold an LED tea light or flameless candle underneath. Turn it on and watch it glow! Prints beautifully with organic supports only on the bottom area where the tealight is held. Or delete the…

Downloads
769
Likes
286
Rating
5
P
PrintablesKingTut

House Detailed House

Recently we have been making renovations to our house, and I am only 14 so I didn't have much say, but it seemed like we were paying architects tonnes of money for basic designs so I decided to try design our house down to the smallest…

Downloads
755
Likes
69
Rating
5
P
PrintablesSandy Wrestler

Articulated Lizzard Curled Smiling with Lines on Back

I just loved this model. Remix of Lizzard to add smile and some texture on back. Sliced files added for PLA with 1, 2 or 3 Lizzards. Very cute original design by McGuyBeer and remix of Curled Articulated Lizzard by Stetofire.

Downloads
716
Likes
57
Rating
1
P
PrintablesSlou_Ing

Dartboard LED ring - slim

All the lighting rings available for dartboards, whether for purchase or as 3D prints, are large and, in my opinion, oversized. Hence, my slim and elegant design of an LED ring for a dartboard (Winmau, Blade 6). Concept: The ring is…

Downloads
696
Likes
41
Rating
0
P
PrintablesPolyForge

Owl – Detailed 3D Figurine

This owl sculpture captures the mystery and wisdom of one of nature’s most iconic nocturnal birds. Perfect for home decor, fantasy dioramas, or as an educational figure for bird lovers. Printing : Suitable for FDM and resin printers…

Downloads
687
Likes
78
Rating
3
P
Printablesfoorschtbar

Prusa MK4/XL Better LED Status Bar

My MK4 is on a sideboard and stands over the edge. As a result, you can not see the great new LED status bar of the MK4. This model solves the problem my MK4 and also fits in any Prusa XL/MK3.5/MK3.9. It is a small light pipe and fits…

Downloads
684
Likes
204
Rating
4.97
P
Printables3D KIMBA

LED Light Remote Holder: Organize Your Lighting Controls with Ease

LED Light Remote Holder: Organize Your Lighting Controls with Ease Product Description: The LED light remote holder is the perfect accessory to keep your LED light remotes organized and easily accessible. Designed to fit the remotes for…

Downloads
661
Likes
76
Rating
5
P
PrintablesNoWayCall

Prop Crown - The Cruel Prince (detailed) - Holly Black

The crown coming from the book The Cruel Prince by Holly Black . === 140mm inner diameter / 45mm height / ~50g depending on infill and material (In my case I printed it in black PLA and painted it gold afterward: See in comments/makes)…

Downloads
631
Likes
64
Rating
5
P
PrintablesgFINN

LED Mini Spotlight - Rotating

This is a simple, yet very useful design for a all-in-one spotlight. After scouring the internet for simple LED spotlight designs we could use to show off Lego models with simple and easy accessible materials, I came up with nothing. I…

Downloads
630
Likes
127
Rating
5
P
Printablessmdollins

2025 Coin Cell Battery LED Light

I needed a reusable way to attach a coin-cell battery to a single 3v LED as well as something I could hand to just about anyone without any explanation and they could figure things out just by looking at it. Just enough of the battery…

Downloads
616
Likes
76
Rating
5
P
Printablestsukworks

'17-'23 KTM Headlight Frame for Diode Dynamics LED SSC2

Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…

Downloads
592
Likes
84
Rating
5
P
Printablesjagr200

Prusa Mini LED Light Bar

This is an LED Light Bar for the Prusa Mini. This light bar is powered by a 12v power supply. It mounts to the top of the Z axis using (2) 5Mx20 button head screws. The stock screws are 5Mx15. The power switch is located above the Z axis…

Downloads
571
Likes
177
Rating
4.88
P
PrintablesLine Arc Line

New Angled Coupler for PTFE Tubing [PC4-M10]

I redesigned my 40° coupler from the ground up! The Fusion360 design is now more parametric, so if you want to mess with the angle, get the source here! https://a360.co/2BwCLdH It's also shorter, and has a smaller footprint in general. It…

Downloads
570
Likes
148
Rating
5
P
PrintablesMar Ber

Better Toothpaste Squeezer with angled slot | Tubenausdrücker mit gewinkeltem Schlitz

english There are so many tube squeezers out there, but I have never seen the slot angled on any of them. I find that the angled slot allows the tube to be pushed out directly with the printed part. Inspired by the most diverse squeezers…

Downloads
556
Likes
54
Rating
4.7
P
PrintablesMiguel M.

Dual LED Strip Clip

This is a remix of my own LED Strip Clip https://www.printables.com/model/68805-led-strip-clip This one allows you to mount two strips side by side with a single clip/screw. Great for the undeside of a lack table. Printing Print a few of…

Downloads
552
Likes
236
Rating
4.86
P
PrintablesTrashBoat

Prusa i3 MK3 Led Strip bracket (5050)

This is a 200mm long bracket to hold a 10mm wide 5050 led strip on the frame of the Original Prusa i3 MK3/S. Remixed from https://www.thingiverse.com/thing:3034514 by nrp Print instructions I printed it at 0.3mm with supports and brim to…

Downloads
534
Likes
43
Rating
3.75
P
PrintablesDadudos

Angled stand for SMALL drawing tablet One by Wacom

This tablet stand was designed to improve the ergonomics of the Wacom One. (for me it works) Has a place to put the stylus. 3mf file included. Only things different than stock .3mm profile is 1 less top layer and 10% infill with a three…

Downloads
526
Likes
78
Rating
5
P
PrintablesBri's Prints

VALORANT Viper Snakebite with LED

Features Highest quality mesh you'll find; no unbaked-normal-maps nonsense. Details are embossed to match the game accurately, and better than even the best paid model from elsewhere ;-) Battery cartridge holds 2x AAA batteries and your…

Downloads
522
Likes
96
Rating
5
P
PrintablesDvG3DAtelier

Wind Powered Lighthouse with Savonius Turbine – Rotating LED Tea Light Effect

Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…

Downloads
471
Likes
170
Rating
5
P
PrintablesXCVOWL

Vileda Sockenhalter/Socksholder

Passt für Stangen mit 12mm

Downloads
466
Likes
48
Rating
3.83
P

3D-Printed Electronic Snowflakes using WS2811 LED Strip

Instructions are in the PDF document and in the YouTube video Printing the branches The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the…

Downloads
462
Likes
109
Rating
5
P
PrintablesJarda

Hydrophonics Moduled Tower

Hydroponics Moduled Tower (inspired by Hydroponics Tower from https://www.thingiverse.com/thing:2403922 and partially https://www.printables.com/cs/model/63055-upgraded-modular-hydroponics-tower-more-compact-st ) is designed to be…

Downloads
460
Likes
64
Rating
0
P
PrintablesJakub Starý

Korunka z ledového království

Tisk korunky inspirované ledovým královstvím. Provedl jsem úpravu a umožnil vložení imitace krystalu, realizování broušeným plexisklem a následné doplnění o modrou leddiodu s slotem na baterii.

Downloads
454
Likes
93
Rating
5
P
PrintablesKikeMaker

Letrero BAR - Led Neon - Bar sign

Letrero BAR iluminado con cintas Led Neon de 12V colocadas sobre acrílico transparente de 31.69 cms x 63,50 cms. La impresión de las líneas que bordean el letrero se realizan en una sola tanda. Las letras B y AR se imprimen por separado.…

Downloads
422
Likes
107
Rating
4.5
P
PrintablesSkunkFunction

Knurled DynaVap Container for Most DynaVap Sizes

I recently picked myself up an OmniVap XL and have been loving it, but I wasn't able to find any containers that I really liked for it. Inspired by some other knurled containers I saw on Thingiverse, I decided to try to design my own. I…

Downloads
411
Likes
59
Rating
5
P
PrintablesRB3D

Shadez-Colorful LED light filters

Shadez are slide on filters that change the color of your lightbulb. Simply print Shadez in your favorite color of filament and insert it onto a standard A19 lightbulb. Shadez turns your light source to the color of your filament! Note:…

Downloads
399
Likes
243
Rating
4.75
P
PrintablesLatrodectus

LED Crystal Cluster Lamp

Use a translucent filament for the crystal and a minimal amount of walls and infill so the light will travel through the print. Use whatever you want for the base. You can probably fit 8(4 above of 4) 5mm LED's in it, but I used 6(2 above…

Downloads
391
Likes
86
Rating
5
P
PrintablesHedo3D

spotlights lampshade V2, GU10 or 12 V, led diffusor, glow in the dark, easyprint

You probably know all of these cheap lights that contain GU10 lamps. Most of these lights are kept very simple and can easily be converted to economical LED light sources. Compared to halogen spotlights, LED lamps not only have the…

Downloads
390
Likes
82
Rating
5
P
PrintablesA.F_3D Print

Nike Swoosh LED Lamp – Desk or Wall Mount

✅ Nike Swoosh LED Lamp – Wall or Desk – Cable Hidden Version A clean, modern LED lamp in the shape of the iconic Nike Swoosh . Simple to print and easy to assemble. Ideal as a desk accent or wall decoration using a bit of double-sided…

Downloads
384
Likes
103
Rating
4.5
P
Printableskrypto elia

Sony A7 Camera with Lens Detailed 3D Model

Discover the intricacies of the Sony A7 with my meticulously detailed 3D model, perfect for enthusiasts, designers, and educators. This high-fidelity model includes every detail of the camera body and lens, capturing the essence of the…

Downloads
369
Likes
15
Rating
0