60 models
Thin version is thinner by 1mm. Gluing The snap fit is good enough to hold both part together. But if you slightly bend the tool, they separate. I used acetone for gluing for PLA or ABS prints. Insert lockpick into core part Apply acetone…
Purpose: It’s expensive enough, having to buy a specialized lockpick for each keyway. It’s especially expensive to have to buy separate 5- and 6-pin versions for each keyway. So just buy the 6-pin version, and use this spacer when picking…
A quick print for those of you needing to organise your lockpicking workbench! Print instructions Infill = 20% Layer Height = 0.3mm Material = PLA This pick organiser has 7 different spaces to place your picks, including: 1x large holder…
Box for lockpicking. A small box that fits everything you need for lockpicking. In the lower part there is space for three 6x2mm round magnets (pause during printing to insert the magnet).
I designed this to organize and store my lockpicks, tension bars, pinning tweezers, etc.. I've included a large bin in the back to hold a bump key hammer. My first version included pegs to hold keychains, but I wanted a little more…
Lockpick handle designed for the Dogleg lockpicks, this will also work on Southern Specialties and Multi pick lockpicks. It has a window included to show the logo and size on the pick. The window also works as a finger shelf. Here are the…
These are old designs I made decades ago... They were cut out of 301 High Yield steel... but you know, plastic is cheaper. The models are 0.5mm thick, so make your layers as small as you can, and maybe make em thicker in the slicer...…
The Breach Card is a folding flatpack lockpicking kit designed to print as a single piece and fold down to the size of a standard credit card. This Thing was designed for the Fiverr X Thingiverse Flat-Pack Fun challenge, and I wanted to…
I make this travel case. Only you need are magnets ( 6 mm x 2 mm). Printed with support on bed (due the hinge). I recommend print first middle part (hinge with one magnet hole) /just cut left and right side of case to spare time and…
Umme is german "street language" and means free of charge/ freebie
This is basically the same as original "thing", but for Southord picks with metal handle (for "Metal Handle Slimline Picks" by Southord). Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: No Resolution: 0.2…
Lockpick handles for picks with scales, such as Covert Instruments and TOOOL, and without, such as Sparrows. I like longer and thicker handles. These are a tight fit, so I heat the butt end of the pick with a heat gun and push them in. If…
Handle for the Sparrow lockpick's Kick Start set
My print settings: Printer brand: Creality Printer: Ender-3 v2 Rafts: No Supports: Yes Resolution: 0,16 Infill: 15
This lockpicking tray was designed to be similar to the one Lock Picking Lawyer uses. It is easily 3D printable, but also easily CNC machinable. If you are in the EU and want to support my work, you can also get the CNC machined version…
1:1 Modell of Lockpicks from the Roblox Game Doors.
Works in standard Shopping Carts for 1€ ; 0,5€ - you just need to put the key in the cart, then rotate by 45° angle to effortlessly move it out without jamming in the cart.
A parametric lockpick holder designed to hold home made lockpicks made from windshield wiper inserts. The shaft of the tool is hollow allowing for storage of lockpicks and tension wrenches.
Small pinning tray to keep everything organized.
Gridfinity 3x2 base. If you have the option use variable layers to print for a better result. It fits perfectly on top or underneath my tubular impressioning tool bin that can be found here:…
My take on handles for lockpicks. Mine are from Sparrow, not sure if the geometry is somehow standartized. Blender buffs can modify the .blend. It is sized for a tight fit on my Bambu P1S printed in Redline PETG-Filament. Use the…
I wanted to have a bit more of a reward for solving MakeAnything's (Devin Montes) puzzles other than to remove the key. I want to gift the puzzle and once solved use the key to unlock the real present. So I made this lock to do just that!…
Simple stand to hold cabinet locks for lockpicking practice. The "outside" hole diameter is 18.90mm. The distance between the notches is ~16.8mm.
These lock body holders are designed to securely hold a round deadbolt body or Sparrows training lock body to a desk edge to make lockpicking clockwise and counterclockwise more comfortable. Two lock holder models are included. The round…
I traced the picks on a comparator and made a slim card so that you can store your picks in your wallet. I ended up with a painters tape solution for holding the picks in situ. I had gone through many iterations with tensioning dimples to…
Handles to suit southord slimline picks
I have a mechanical lock pick gun from Brockhage, but it arrived in a cardboard box, with extra parts and no storage solution. So i made this generic case that should work with most versions of the mecanical lock pick gun you can find…
Dimple lockpick handles that fit the Southord PDX15 picks. Thanks to aubenc for the OpenSCAD Knurled Surface Library v2. Made the design very easy. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: No Resolution:…
I'm an amateur lockpicker with large hands. The edge of the fortress cylinders kept digging in my hand when practicing which made those types of locks not enjoyable to play with. Problem solved. The holder is 20mm thick, which makes it…
This is a simple lock pick stand which holds 12 lock picks using the size of the peterson plastic handles. It is staggered, so the rear picks are higher and easier to see. It also holds two hard tension wrenches (Prybar Lite), and some of…
A card with a four piece "lockpicking kit" with a place to add any text on the base of the card. The text should be 0.5mm tall to match the size of the card. Critical Notes: Weak plastics is not ideal for lock picking. The card does not…
*SPOILER ALERT* A non-working replica of the awesome lockpick device that Kleya used to infiltrate the coruscant hospital to save Luthen from the Empire. Im not gonna say this is screen accurate, but it's probably as close as 3D printing…
I wanted a simple and space-saving transport and storage option for my Multipick lock picks, so I came up with this solution. You can also store the picks neatly when working. Everything is secured with two elastic bands. The depth of the…
a small but useful tool holder for a large assortment of lockpicking tools
One version with holes for screws. But you will need a glue to assemble it anyway.
Use a 6mm OD tube with 0.4mm walls: https://a.co/d/g5sFcvF. I used a dremel to cut a slot in the end of the tube for the tip to fit into and superglued it into place. Might have to file/sand the inside of the tube after. Handle attaches…
This handle securely holds standard lockpicks and allows swapping in seconds using a thumb-operated quick-release switch. No tools, no disassembly, no stuck picks. Tested with Multipick picks ranging from 0.4 to 0.6 mm. EDIT: The handle…
Locks are super simple, but the bits are so tiny . You've probably thought to yourself: “What's goin' on in there?!” Well, this. Only smaller. Print out this visual aid for your next lockpicking clinic, & show everyone how it's done. If…
This is a hand grip for a eurocylinder. It is made for the Multipick training cylinders which are cutaway locks.
created this when i gutted my multipick i bought from lockpicktolls.com. make sure to add pause gcode in your slicer before the bridging starts and attach the pick itself to the slot. you may have to file the opening a little bit as some…
This is a simple thumb wheel that installs inside the Covert Companion Turning Tool Expansion to make rotating the tools out easier. I found the sharp points uncomfortable to use, so this makes for a more pleasant deployment experience.…
Need: Three M3 x8 Countersunk Screws Three M3 Nuts My pick had a slight bend to it but flattened out when squeezed between these handle scales. A small bridge will print on “JL_Nut.stl” to support the hole. You may need to poke through it…
Sparrow Lockpicks sells a “sphere” that holds a standard lock core. The idea is that the sphere gives the lock core some heft and makes it more ergonomic to hold it in your hand while picking the lock. Originally it is designed to sit on…
Lockpick Handles for: 0.025" picks without handles Picks with metal sandwiched handles Law Lock Tools Soutord Pocket Pen Picks Wiper Blades Models with holes in the handles are to help the flow of air so glue reaches deeper in the handles…
Two-part handle for cheap lockpicking tools from chinese markets. Even on 0.2 layer its tight for the tool, and on pin - may be needed to sand down the pin, so it can be easier to split. Two versions: short/long. One is 55mm, second 80mm.
This model is an adapter to enable lock holders from the "Universal Lock Holder" set to be used in a Southord Lockpicking Stand. Universal Lock Holder - https://www.thingiverse.com/thing:3115194 Creator - Trekmaster30 on Thingiverse The…
Prisoners and Lockpicks holder for the board game Clank! Catacombs
A simple handle for lockpicks from " le corbeau " 1mm thickness, modify at ur convenience in your slicer. To glue or combine with a shrink tube to reach the thickness you need.
The Southord lockpicking stand is great, but the lock sleeves don't last, and the locks don't fit very well without them. These fit the included locks, and print quickly.
added grip indentations to the lid, extruded the SVG of the tools into STL using tinkercad.
Gridfinity LockPick kit holder, 2x2 non stackable Thinkercad link: https://www.tinkercad.com/things/227vrDJdCau-lockpick-gridfinity-stand
I whipped this up to hold lockpicks with the Gridfinity system. Nothing flash or fancy, just a place to drop a few picks. I print them on a Prusa Mini with a 0.6 nozzle and .25 layers. The holes are 16mm x 6mm, so they'll hold most picks.…
A handle to enable the use of a Street Sweeper Bristle or Windshield Wiper Spring as a lockpick without undue discomfort. This helped me reduce some of the weight and bulk from my more heavily carried kit by allowing me to carry a single…
I wanted a simple and space-saving transport and storage option for my Multipick lock picks, so I came up with this solution. You can also store the picks neatly when working. Everything is secured with two elastic bands. The depth of the…
added grip indentations to the lid, extruded the SVG of the tools into STL using tinkercad.
Lockpick handles for picks with scales, such as Covert Instruments and TOOOL, and without, such as Sparrows. I like longer and thicker handles. These are a tight fit, so I heat the butt end of the pick with a heat gun and push them in. If…
