8,005 models
Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
Layer 0.30 mm, filling 25%, brown PLA painted with acrylic markers, supports on the printing pad
Print approx. €12.19–€14.90 excl. taxPreliminary estimate for one variant
The Sunflower Windmill - Self adjusting Sunflower wind turbine Link to the Official Ball Bearing Mod Information about model maintenance: Due to the considerable administrative effort involved in managing models across different…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Supports needed Scale it as you like :) Higher Poly by Noah1794:…
Print approx. €2.70–€3.31 excl. taxPreliminary estimate for one variant
A three piece sunflower cookie cutter. The three piece design allows you to achieve the desired impression depth in the middle part regardless of the thickness of the dough. Or you can cut out the center part completely and swap it…
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
A fun little flower at a cute size (under 5 cm in diameter) that can be used as a hair accessory by sliding a standard bobby pin into the provided slot. This is a quick and easy print (no supports required), and comes in at under 6 grams…
Print approx. €0.81–€1.00 excl. taxPreliminary estimate for one variant
I have been planning to make this model for a long time, the model complements my existing sunflower fabric coaster ( https://www.printables.com/model/285153-sunflower-fabric-coaster ). The holder should hold 4 to 6 coasters. For better…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
Print approx. €13.60–€16.62 excl. taxPreliminary estimate for PETGSource material: PET
This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Printed in PETG in various colors , some parts 0.3mm layer to reduce time ,hands 0.2mm layer, all parts without supports . The link between petals are printed using Tansparent Petg , needed to avoid petal movements The total width of the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Size: 100mm
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor.
Print approx. €5.21–€6.36 excl. taxPreliminary estimate for one variant
Can be printed with vase mode. I recomend use some coating when you print it with vase mode. (for example hair spray) PETG or PLA nozzle 0.4mm extrusion widht 0.8 or waterproof pot in vase mode
Print approx. €4.91–€6.00 excl. taxPreliminary estimate for one variant
I designed this for my EGO 615. It uses very little plastic but is still very strong. I only print it with PLA and only 20% infill. The nice perk is that it has an angled design to help with self-aligning, so you don't have to be precise…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for one variant
🎁Valentines Day Blooming Flower Gift Box 🎁 LINK MY REMIX→ https://www.printables.com/it/model/392721-valentines-day-blooming-flower-gift-box Nozzle 0.4mm Print 0.2mm quality → 0.15 Infill 15% Support ❌ Brim ❌ Here are all our plans, take…
Print approx. €6.81–€8.33 excl. taxPreliminary estimate for one variant
While thinking of new ideas we realized that we never made a Flower flowerpot! So... We made one! We hope you like it! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send…
Print approx. €2.78–€3.39 excl. taxPreliminary estimate for one variant
The GCODE file contains a model in vase mode with dimensions X 100mm, Y 100mm, Z 60mm. Thickness and flow of the outer wall 0.65mm 150%, bottom of the pot 1.08mm, initial layer 0.28mm.
Print approx. €1.65–€2.01 excl. taxPreliminary estimate for one variant
I created this remix because the original version was a bit larger than I needed, and I wanted to fit the cables in more snug. The original also broke when I went to attach the zip-ties, one bit snapped off. It was still usable, but I…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Setaria Vindis Flower Knight Girl. Im a bit skeptical about the printability of the hair. I applied selective offsets …but it looks like a potential rat's nest of support material in the end. If you give it a go. Do not reduce the size……
Print approx. €18.28–€22.34 excl. taxPreliminary estimate for one variant
Easy to make a cute Cat with flower keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor.
Print approx. €6.87–€8.40 excl. taxPreliminary estimate for one variant
Print in vase mode. The GCODE file contains a scale model with dimensions X 80, Y 80, Z 60. Outer wall width 0.65, outer wall flow 150%, base thickness 1.08mm, initial layer thickness 0.28mm, main layer height 0.2mm.
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
Easy to make a cute Sunflower keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Paint Pouring Flower with 10 spouts. The Flowers dimensions are approximately; 70x30 mm. This Flower features unique holding tabs on top to allow easy lifting from the canvas after its used for pouring paint! I recommend printing with a…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
Here's a model to help mount the Dewalt DCBL722 Leaf Blower, wrapping around the handle for a secure mount. I've also included Fusion 360 and Step source files if you want to customize (includes a model of the handle itself). Bill of…
Print approx. €2.61–€3.20 excl. taxPreliminary estimate for PETGSource material: PET
Print Settings Material: Spectrum - Rust Copper Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before wipe: 0 This is…
Print approx. €3.43–€4.19 excl. taxPreliminary estimate for one variant
This is an attachment for the Makita DUB184 18V Brushless Electric Blower . Note: It may fit other models that use the same blower funnel but I have not tested with others. I have included as many files as I could so it can be modified…
Print approx. €9.11–€11.13 excl. taxPreliminary estimate for one variant
Layer 0.20 mm, filling 25%, white PETG painted with acrylic markers, supports on the printing pad.
Print approx. €10.51–€12.84 excl. taxPreliminary estimate for PETGSource material: PET
This flowerpot was designed for growing of little herbs directly on your fridges. Dimensions 50x45x28 Used magnet dia.10 _5mm
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
How to change parameters? Model in the picture is printed in 0.32mm layer height. Seam position is aligned back . → because flowerpot is static object and no once will take it in hands and rotate it….sporadically. If you download f3d…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Just an easy remix of rubberduck, to make it fit some flowers, like cactus or tillandsia. It also has a excess water outlet in its butt. Some support to its beak is recommended…
Print approx. €7.80–€9.53 excl. taxPreliminary estimate for one variant
A festive and ornamental take on the classic skull, this piece is adorned with floral carvings that give it a lively and celebratory look. Inspired by traditional sugar skulls, it's perfect for adding both charm and symbolism to your…
Print approx. €5.69–€6.96 excl. taxPreliminary estimate for one variant
A wall mount for the Ryobi 40V leafblower that contains a clip/slot mount (as seen in the pictures). This can vary between leafblower models. This was remixed from the referenced model to make it sturdily wall mountable. This is a…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Coin with engraved flower symbol. Uses art from PublicDomainVectors.org .
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Für den Stiel habe ich Blumendraht verwendet. Die löcher dafür müssen in der Blüte und im Blatt etwas aufgebohrt werden. Das Blatt ist schwirig zu drucken, ich habe mehrere auf einmal gedruckt, da sollte es kein Problem sein.
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Prevents things (usually my pants or shirt) from getting sucked into the air intake. Snap-in fit, removable Suggested print settings: - 0.20mm QUALITY - Prusament PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% -…
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
05/23/2024: Plant Saucer has been added *************************************************** This model can be print without any support and all parts can be print into a PRUSA MK3S+. For the “Pot spacer”, you could print 2 at the same…
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for PETGSource material: PET
Introduction: The design was made to be aesthetically pleasing, offer improved part-cooling while also supporting a BL-Touch or CR-Touch ABL. It is a replacement for the stock cooler however will require an additional 4010 blower. NOTES:…
Print approx. €7.65–€9.35 excl. taxPreliminary estimate for one variant
Hanging flowerpot for small overhanging flowers with integrated base. Flowerpot is 60 mm in diameter. No supports are required. Waterproof when printed with generic PLA, 0.15 mm layer and 0.4 mm nozzle.
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
I made a set of the coasters for my mother in-law and designed an upswept holder to give it more of a flower look. Just a small enhancement to display the amazing print already designed by rorys3D. I set it to concentric and got a great…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant
D: wasserdichte Blumenvase für Rosen, Tulpen, etc. Höhe gesamt: 370 mm Lochtiefe: 170 mm Durchmesser außen: 108 mm Durchmesser innen: 93 mm !!!Keine Haltbarmacher zum Blumenwasser beimischen!!! E: waterproof flower vase for roses, tulips,…
Print approx. €55.88–€68.29 excl. taxPreliminary estimate for one variant
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 Seam Position: Aligned For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before…
Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant
Internal dimensions are: 80 mm bottom 100 mm top 75 mm depth
Print approx. €6.23–€7.61 excl. taxPreliminary estimate for one variant
Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for PETGSource material: PET
If you have a Google Home Mini, you need it ! The base is a fresh lawn, easy to maintain because it does not need to be watered. The bright green color gives a feeling of well-being and calm. Even the stem of the flower has a shape that…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
The only difference is lower pedestal.
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant
Flowerpot and tray inspired by the unique sunny houses in Szeged. (In Hungarian: "Napsugaras ház") Unfortunately, there are fewer and fewer of them, they will perish or disappear. From the rectangular opening depicting the eye of god, the…
Print approx. €4.86–€5.95 excl. taxPreliminary estimate for one variant
flower pot with leaves design dimensions: diameter 100mm height 100mm
Print approx. €10.75–€13.14 excl. taxPreliminary estimate for one variant
Wall art: Sunflower
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant
The pots (4,5*4cm) can be printed with PLA or PETG without support. If you print the pots with different colors and patterns you still know what was planted in each pot. The new paint function of the Prusa Slicer is very useful to colour…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
flower pot hexagon This Self-Watering flower pot hexagon consist of two parts. Flower pot bottom for water above for plants. The hexagons on the outside of the flower pot should appear endless. The advantage of the hexagonal flowerpot is…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Elevate your space with this intricate Flower of Life coaster! With a 100 mm diameter and 4 mm height, it’s perfect for protecting surfaces while…
Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant
This is a replacement for the lower leg joined for a X-500 style quad drone. This part will work for https://amzn.to/41AV1Jv (500-X4 Carbon Fiber Quadcopter Frame Kit). It will fit any X-500 drone that uses 16mm (OD) down tube for leg and…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for one variant
“I wanna be very best! Like no one flower pot ever was!” Yeah, I created a Diglett and Dugtrio Flower Pots for everyone, who love Pokémons! I took and remodeled one original model by CobraCrafts from Printables and made it into a simple…
Print approx. €9.78–€11.95 excl. taxPreliminary estimate for one variant
Toy. Sensory tray for kids. Choose the model you like best.
Print approx. €5.29–€6.46 excl. taxPreliminary estimate for one variant
Easy printing without any supports. If you want to print the entire lowerarm, you'll have to split it into two parts. PLEASE SEE MY OTHER PROJECTS! :) https://www.printables.com/pl/social/236468-nieuniknione/models & Collection: EROTICA…
Print approx. €7.76–€9.48 excl. taxPreliminary estimate for one variant
This is the second version of the Sunflower. A little bigger and with improved petal connection. 29.01. Update: I upload a new STL for "Girasole 2.0 - Centro" Delete and don't print the old STL. EU and UK* Version Sorry for the…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
I designed sunflower in Ukrainian colors to give it out to express support with Ukraine. The two pieces click together with moderate preassure. Just add a safety pin and secure it by moving the slide to locking position.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Für Metabo LB18 Laubbläser - Flachdüse gebogen. Die Düse wirkt auf den Fotos so klein: Auf dem letzten Foto sieht man aber, das die Düse einen Großteil der Druckfläche einnimmt… Perimeter:6 Top/Bottom:6 Kein Support Filament: Flashforge…
Print approx. €9.94–€12.15 excl. taxPreliminary estimate for PETGSource material: PET
Drawing inspiration from the grandeur of Roman vases, I've crafted this classic curved flower pot to bring timeless elegance to your garden or indoor space. Its wide and graceful silhouette is adorned with thick vertical rounded lines…
Print approx. €37.49–€45.82 excl. taxPreliminary estimate for PETGSource material: PET
I printed several sunflower fabric coasters and needed something to hold 'em in. Pattern subconsciously inspired by some storage crates I had lying around. I made the coasters glow in the dark for late night table protection!
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…
Print approx. €11.13–€13.61 excl. taxPreliminary estimate for PETGSource material: PET
It is identical to the awesome original except every piece can have its own color.
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for PETGSource material: PET
I had to adjust the hour and minute hand's holes to snuggly fit the clock mechanism that I bought on Amazon. Figured this will save someone the time it took me to tinker with this. Here is a link to the clock mechanism I bought (5/8):…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
After multiple iterations, we created this nice, waterproof and modern vase design. Our prototype in the pictures is PETG white, but other colors (with shine or metallic) will probably look great as well! The smaller versions are perfect…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
GF: “I need you to make me a Quilling tool - do you have any small wooden dowels?” Me: @#% is a Quilling Tool?" Well, it's for making paper flowers. So I designed and made this version. It pops on the top of a pencil. There's two…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
I love MOM keychain or necklace! To show your mom how much you love her on Mother's Day or any day!!! Made on my Prusa Mini with one color and on my Bambu X1C with two colors. Prusa Mini - purple and Bambu X1C -yellow with gray blue…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Add a new level of elegance to your space with the Flower of Life Coaster – Version 2 ! With a diameter of 100 mm and a height of 4 mm, this…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
INSTRUKCE: LÍMEC ANO - NE PLA TISKOVY PROFIL 0,2MM KVALITA INSTRUCTION: COLLAR YES OR NO PLA PRINTED PROFILES 0.2MM QUALITY
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for PETGSource material: PET
Back up or replace ignition keys for snowblowers by MTD, Ariens, Certified, Husqvarna, Powersmart, Toro and Yardworks and possible others in North America. This is a remix of the key by Foden. Unfortunately it does not work on my Toro and…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
These are Kristina's unique bird and flower-themed side panels for the modular lantern. I created various prints from her design: There are simple solid three-colour prints and variants where the leaves or the flowers create cut-outs.…
Print approx. €4.65–€5.69 excl. taxPreliminary estimate for PETGSource material: PET
This 3D model is a pumpkin-shaped flower vase, ideal for festive Halloween decoration or general decorative purposes. The design blends modern and festive styles, making it perfect for adding a unique touch to any space. No supports…
Print approx. €9.75–€11.91 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have Block, Brick, LEGO Flowerpot, Vase for you. It prints really well. You need to use supports! If you are interested in my work, the links are here:…
Print approx. €7.30–€8.92 excl. taxPreliminary estimate for one variant
Five-leaf piston flower cutter that is used to cut out marzipan flowers for decorating, for example, cakes. / Pětilisté pístové vykrajovátko květiny které slouží k vykrajování marcipánových květin na zdobení například dortů. When…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This modified follower allows for 10 rounds of 22LR to fit in the standard 8 round magazine of the Beretta Bobcat 20x. To install: Remove the pin from the existing follower. The pin has a pointed end. You must push the pin out from the…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
My throttle control lever handle broke off. After several years of just using the metal arm, I decided to draw up a replacement that could be 3d printed. If you need one of these, it is a quick and easy print. Might save you a few bucks…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Important to note: the flower pot has a small side hole for water evaporation. Print the model using the provided 3mf settings. 3 Parameters Layer height 0.2/0.3 You need to use infill only at the bottom circle, this is provided in the…
Print approx. €8.02–€9.80 excl. taxPreliminary estimate for one variant
WATER LILY FLOWER, KVĚT LEKNÍNU
Print approx. €11.53–€14.09 excl. taxPreliminary estimate for one variant
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Print approx. €3.78–€4.62 excl. taxPreliminary estimate for one variant
Get different forms by scaling the model. No supports required, print in Vase mode.
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
Flower pot with hex design height 90mm, diameter 100mm prints without supports
Print approx. €5.61–€6.86 excl. taxPreliminary estimate for one variant
A blower extension for Stihl SH86. Perfect for clearing gutters. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.4 mm Infill: 15% Filament: Amazon Basics PETG Black Notes: Printed with 0.8mm…
Print approx. €7.89–€9.65 excl. taxPreliminary estimate for PETGSource material: PET
Model prepared for multi-color MMU printing. Printing settings: Filament: Prusament PLA Brim: No Infill: 15% Nozzle: Prusa HF 0.4 mm Prusa Slicer: 0.2 mm Speed MMU settings: Extruder 1: Brown Extruder 2: Black Extruder 3: Green
Print approx. €38.27–€46.78 excl. taxPreliminary estimate for one variant
Hi :-) I needed something for growing herbs - but I always forgot to water the flower pot. So I make this flowerpot where you can choose how many parts you want :-) Use hot glue for attaching parts. Print instructions Rafts: Doesn't…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Recommended print settings: Material: PLA/PETG Layer Height: 0.10 Infill % : 50 Supports: None Print Orientation: Default as modeled
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
You print this little flower pot in vase mode and then press fit the inlay into the channels. (They snap in when I print on my Mk4). It allows you to make a dual color design with only a single extruder. Once I had all the filament press…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET
Ceramic Container With Flower Motif
Print approx. €14.28–€17.45 excl. taxPreliminary estimate for one variant
Tento držák truhlíku s květinami na plastové okno vydrží i velký vichr a vaše truhlíky z okna nespadnou - tisk PETG na MK4, 0.4 tryska, vrstva 0.2 Držák se montuje zasunutím do originální spáry pod okením rámem anení tak nutné žádné…
Print approx. €4.36–€5.32 excl. taxPreliminary estimate for PETGSource material: PET
This remix of the original lowers the Revo6 or V6 Hotend by about 2mm and adds the E3D logo to the outside of the model. I printed with a 0.25mm nozzle for the best quality. Any material should work, but I printed with PETG
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
I created an adapter that allows you to mount normal M8 threads on the Original Prusa spool holder ( https://www.printables.com/de/model/511105-m8-adapter-for-original-prusa-mk3-spoolholder ) . So I was able to attach the Universal…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Bring timeless design to your table with the Flower of Life Coaster – Open Edge ! Measuring 100 mm in diameter and 4 mm in height, this elegant coaster…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
Decent spiral flower pot with saucer incorporated into design, hidden and invsible so your flowers won't rot and pot remain decent and nic looking. Comes in three sizes, happy printing, happy remixing. Printed with: Filament: PET-G…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
These two flower pots were made for each other. You can print the pots themselves, or you can print the molds. If you print the molds, use a flexible material or a material you can make pliable enough to pull out the casted pot. I casted…
Print approx. €11.99–€14.66 excl. taxPreliminary estimate for PETGSource material: PET
Star Trek: Lower Decks , Season 4 Episode 2, "I Have No Bones Yet I Must Flee" The smaller size (50mm) is designed as a keychain, with a hole in the corner. The larger size (150mm) is designed as a plaque.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Takashi Murakami Flower Print Profile: PLA Print Time: 1 H 16 M Model Weight: 8.87 g Model Height: 55.96 mm Layer Height: 0.2 mm Wall Loops: 2 Infill: 10% Grid Support: Tree/Organic Brim: Yes
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Print a red leaf and a black top , put it together with a green filament And now a geen leaf, glue it Or put a pin on it for a lapel on jacket If you like it , give me a like.
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
Imprimé avec une buse de 0.4 / couche de 0.3 Prévue pour être suspendu avec une chaine faite avec le modèle “ Maillon pour Chaine ” Set pour suspendre le cache pot Printed with 0.4 nozzle / 0.3 layer Intended to be suspended with a chain…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
