Search results: m12

Sort order

844 models

P
PrintablesEmkatech (Mike)

Knurled Nut M3–M12 with Hex Nut Insert

Features: Fits standard hex nuts from M3 to M12 Ergonomic knurled profile for a secure grip Simple assembly: press-fit or glue the nut Optimized for 3D printing (PLA, PETG, ABS recommended) Recommended Print Settings: Layer height: 0.2 mm…

Downloads
639
Likes
181
Rating
4.5
P
PrintablesAztec

Short & compact screw measuring tool M2-M12

Thought the versions that existed were lacking by either being too big to keep in a tool belt or didn't have common screw sizes over M5. Also made a version with common pneumatic couplings that are commonly used in my industry. Printed…

Downloads
634
Likes
63
Rating
4.88
P
Downloads
347
Likes
75
Rating
5
P
Printablessnoty

Milwaukee M12 Rover Flood Light Cover

This is a protective cover for the Milwaukee 2367-20 M12 ROVER Service and Repair Flood Light with USB Charging.

Downloads
243
Likes
33
Rating
5
P
PrintablesBuildComics

Milwaukee M12 FIWF12 0.5inch impact driver Holder

This is a horizontal (box) or vertical (wall) mount for the Milwaukee M12 FIWF12 0.5inch impact driver. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).

Downloads
227
Likes
34
Rating
0
P
PrintablesBuildComics

3M Adflo to Milwaukee M12 Battery Adapter

Can be used to run 3M adflo from Milwaukee M12 battery. To assemble you need to solder some wires and crimp some spade connectors. Use Large 6.3mm spade connectors for the Milwaukee battery side Use small 2.8mm male spade connectors for…

Downloads
217
Likes
15
Rating
0
P
PrintablesBrian Amato

Milwaukee M12 Installation Driver Shelf Mount

I have a unique space and I wanted something to “holster” my M12 installation driver on the underside of a shelf above my standing desk. Most options I could find were wall mounts. I printed it with minimal supports standing up. Due to…

Downloads
200
Likes
48
Rating
5
P
PrintablesFlondy

"Knurled" M12x1.5 (metric fine) threaded nut

I ordered some cable glands online and did not notice that they would not come with nuts to actually mount them in my distribution box. I therefore quickly made this model. I printed them in Prusament PLA with a layer height of 0.1 mm and…

Downloads
195
Likes
10
Rating
0
P
PrintablesRD

BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw

Bosch GCM12SD Shadow LED Light Upgrade – Custom 3D Printed Bracket + Full Install I designed and installed a custom shadow LED light system for the Bosch GCM12SD Glide Miter Saw, turning this already outstanding tool into a…

Downloads
65
Likes
15
Rating
0
P
PrintablesBuildComics

Milwaukee 2407-20 M12 3/8” Drill/Driver Holder

This is a horizontal (box) or vertical (wall) mount for a milwaukee drill driver type 2407-20. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).

Downloads
57
Likes
6
Rating
0
P
PrintablesVopac

Milwaukee M12 PAL Flood Light Cover v2

Updated version, it now has two small bumps in the that prevents the lid from sliding off inadvertently. Also removed some plastic on the side for a sleeker look. Printed in AddNorth X-PLA Power tool Red, 0.2 layers and 2 wall loops, no…

Downloads
48
Likes
11
Rating
5
P
PrintablesTimW

Black and Decker CMM1200/MM575 Mower Blade Insulator

Print with text up. use supports on build plate only.

Downloads
40
Likes
0
Rating
2
P
PrintablesOsfald

UNI-T LM80 LM100 LM120 LM150 laser distance meter tripod mounting holder

I recently bought a UNI-T model LM100 laser distance meter. Unfortunately, this meter is not equipped with a thread for fixing it to a tripod. So I designed a suitable holder with 1/4" UNC thread which allows you to mount this meter on…

Downloads
33
Likes
5
Rating
5
P
PrintablesSilent331

Metric nuts and bolts. M4, M5, M6, M8, M10, M12, M14, M16, M18, M20 ISO Standard

ISO Standard Metric nuts and bolts. The STL files are only for the nuts as they will be the same for all applications. Fusion 360 file is included to easily customize bolt lengths and threads. The thread length in the file is 5mm from the…

Downloads
11,870
Likes
910
Rating
5
P
PrintablesThomllama

Milwaukee M12 Battery holder New- Version 5!

Note!** June 13 2022 Version 5 Released. ** - Increased spacing and set back to accommodate the Larger 3 amp and up battery sizes - Added single and 2 unit shelves if you don't have 3 - added profile and snugged fit for better hold and…

Downloads
6,451
Likes
732
Rating
4.98
P
Printables460outdoorTig

Milwaukee M12 3 battery holder

Please drop a like if you want to see more of this kind of stuff:). I remixed this model with different tolerances to make sure the batteries stayed on the wall above my busy work bench and vibrations from the tools. 3 battery Holder for…

Downloads
5,477
Likes
565
Rating
4.9
P
PrintablesFilamentix

Hundreds of Metric Hex Screws Version 1: M2, M3, M4, M5, M6, M8, M10, M12, M14, M16, ... M48

An improved version of this model is available at: Hundreds of Metric Hex Screws Version 2 The screws are inspired by DIN 933 / ISO 4017 metric screws with hexagonal head and long threads. The standard screw design has been slightly…

Downloads
5,336
Likes
1,670
Rating
5
P
PrintablesDan H

Milwaukee M12 Tool Holder

Organize your M12 Milwaukee tools with these mounts. Extended version for radio, but could be used with other tools if you need them sticking further off the wall. Printed in PLA, I like to use 3 walls and 20% cubic infill but they are…

Downloads
5,206
Likes
447
Rating
5
P
PrintablesYangorang

Power Tool & Battery Wall Control / Pegboard Mounts for Milwaukee M12

Straight and angled tool holders + a quad battery holder for mounting Milwaukee M12 system power tools on Wall Control or standard pegboard. I've made both a heavy-duty version with a 3rd leg for extra stability and a standard version…

Downloads
4,363
Likes
597
Rating
5
P
PrintablesFilamentix

Complete Set of Metric Acorn Dome Cap Nuts M2, M2.5, M3, M4, M5, M6, M8, M10, M12, ..., M64

I added a tolerance of 0.2 mm to the thread diameter in order to compensate for printer tolerances. Print with small layer height, e.g. a maximum of 0.15 mm for a 0.4 mm nozzle. Please find screws for the nuts here:…

Downloads
3,424
Likes
1,134
Rating
5
P
PrintablesAlex Crow

Star grip hexagon screw M3 M4 M5 M6 M8 M10 M12

Star knob for hex screws DIN931 and DIN933 in M3, M4, M5, M6, M8, M10 and M12 The knobs have a perfectly fitting hexagon for the screws. This ensures a form-fitting power transmission when tightening and loosening. In addition, there is a…

Downloads
3,373
Likes
1,060
Rating
5
P
PrintablesRM820119

Milwaukee M18/M12 Battery Charger Holder/Mount (Version 3)

UPDATE 08.03.24: Added a new version (Milwaukee Charge Mount 3 v8). Did some edits on the holes and beefed up the side brackets. This virtually eliminates any wobble. Also, rebuilt the small mounting tabs… better fit. To be honest, I use…

Downloads
3,354
Likes
420
Rating
5
P
PrintablesRemiRafael

Handles for M7 to M12 bolts and screws

I previously published a collection of handles for nuts and screws i designed over time. (https://www.printables.com/model/359479-handles-for-m3-to-m6-bolts-and-screws) It was quite popular and i was asked a few times to make the models…

Downloads
3,052
Likes
1,372
Rating
4.88
P
PrintablesTD3D

Sterngriff, star knob M4, M5, M6, M8, M10, M12, M14

Sterngriffe: von M4 bis M14 Update 06.02.2025 M4 und M5 mit größerem Griff Flache versionen in allen größen M4-M14 Update 02.02.2025 M6 mit größerem Griff weitere größen: M10, M12, M14 Update 26.01.2025: Version 2 ( V2) abgerundete Ecken…

Downloads
2,882
Likes
619
Rating
5
P
PrintablesEistee

Gridfinity Bin Labels Hexagon socket head cap screws ISO 4762 former DIN 912 M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20

The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame The bolts are to scale as far as possible. When the screws get too long for the label, the bolt figure…

Downloads
2,833
Likes
847
Rating
4.94
P
PrintablesGfölliBär

Milwaukee M12 Battery holder

I designed some Battery holder for my Milwaukee M12 battery to organized them. Printing: Printer: Mk3s+ Material: PLA/ PETG Infill: 15% Layers high: 0.3mm Note: The bigger Battery's (4-5) are not fitting in the 2Ah battery holder.

Downloads
2,659
Likes
340
Rating
4.88
P
PrintablesUglylittlebush

Milwaukee M12 Battery cover replacement

My battery cover had fallen off due to abuse and machine coolant exposure, which degraded the original cover. This is a replacement cover for the Milwaukee M12 battery, this works for the small stubby type shown in the picture. It clips…

Downloads
2,598
Likes
309
Rating
4.75
P
PrintablesOverMaintained

Milwaukee Battery Wall Mounts (M12 & M18)

Mount your Milwaukee M12 or M18 Batteries cleanly to your wall! 2 of each file are available. “Non Locking” files will not retain the battery, better for shop or home storage where vibration and movement are not an issue, and easier to…

Downloads
2,372
Likes
296
Rating
4.78
P
PrintablesLoki-tactics

milwaukee m12 drill wall mount

M12 wall mount for drills. Keeps the drill close to the wall.

Downloads
2,266
Likes
317
Rating
5
P
PrintablesVC Design

M12 Bolt and Nut - 6 variations

M12 Metric style bolts in 6 variations: 8, 16, 20, 25, 30, 35 mm thread length. 1 style nut. Use 40% infill.

Downloads
1,782
Likes
372
Rating
5
P
PrintablesRH3D

Screw measuring tool - card size, pocket version. M2-M12 0-82 mm

I really liked the idea from Boogie for screw measuring/sorting helper but decided to design my own with some of his approach in mind. FEATURES size of a credit card so you can put it in your pocket or a wallet screw sizes M2 - M12 screw…

Downloads
1,717
Likes
280
Rating
5
P
PrintablesToolsToMars

Milwaukee M12 Battery holder

I had trouble finding one of these files that would fit so i made this one on fusion. 2 regular wood screws to attach to plywood or a cabinet. Its not too tight so easy to get the battery in and out. Its meant to be used on a flat…

Downloads
1,711
Likes
154
Rating
4.27
P
PrintablesHackinistrator

milwaukee M12 impact bit holder model 2553-20

part bolts into existing belt clip mount (uses m2.5 bolt) no recommended to print in pla , it will shatter or deform . best printed with cf filled nylon or PC . no supports needed

Downloads
1,692
Likes
376
Rating
5
P
PrintablesKyu_u

Milwaukee m12 tool holder

Milwaukee m12 tool holder

Downloads
1,634
Likes
129
Rating
5
P
PrintablesRB Tools

Milwaukee M12 Battery holder

This holder is designed with a lower angle, to fit in a tighter space. So the battery will be pulled out more so than up. The print in picture is printed with Bambu PLA on a Bambu printer.

Downloads
1,610
Likes
175
Rating
5
P
PrintablesEmkatech (Mike)

Knurled Screw Heads for Hex Bolts (M3–M12)

This set includes knurled screw heads designed to fit hex bolts according to ISO 4017 . The bolt length can be freely chosen, giving you maximum flexibility for your projects. The design also accommodates matching washers according to ISO…

Downloads
1,597
Likes
624
Rating
5
P
PrintablesZUMA351

Milwaukee M12 Extended Battery Holder

I modified the Milwaukee M12 Battery Holder to fit the M12 extended batteries

Downloads
1,578
Likes
207
Rating
4.9
P
PrintablesJer

Metric Fender Washer Set M3 M4 M5 M6 M8 M10 M12

Fender washers in all of the sizes typically sold in assortment packs. Parametric f3d included for custom sizes. Public domain license. UPDATE 2026-05-14: Re-rendered all STLs with correct inner diameter. Previous ID was set to exact…

Downloads
1,556
Likes
180
Rating
5

Milwaukee M12 Lock In Battery Holder - The Original

The file is FREE, Please press the LIKE button. This is a holder for the Milwaukee M12 battery. The battery will lock in using the tabs on the battery. Mount these under a shelf and clip in your batteries for later use. Enjoy! 11/4/2025…

Downloads
1,370
Likes
132
Rating
5
P
Printablesmaxelman

Milwaukee M12 Inflator Wall Hook

Polymaker Matte PLA Filament 1.75mm Army Red is a good color match for Milwaukee Updated 1/20/24 - removed a small hole artifact from the middle. Thanks to @MatthewSlay for the heads up. Also added a STEP file

Downloads
1,351
Likes
240
Rating
5
P
PrintablesKyle

M12 angled battery holder

Added options for dual, triple, and quad holders.

Downloads
1,329
Likes
119
Rating
5
P
PrintablesRobul

Multiboard Milwaukee M12 Battery Holder / Milwaukee M12 Akkuhalterung

Die Halterung für M12 Akkus von Milwaukee ist für die Nutzung mit dem Multiconnect System von @DavidD für Multiboard gedacht. Es gibt ein Modell für die kleinen und eines für die größeren Akkus. Beide Modelle sind so ausgelegt das sie…

Downloads
1,273
Likes
206
Rating
4.5
P
PrintablesZanfar

Milwaukee M12 Fuel Bit Holder

A 3-position, ¼″ hex bit holder for Milwaukee's M12 Fuel line of tools. Mounts using the stock clip mount--either in place of, or on the other side of, the stock clip. A right and left STL is provided to fit either side or the orientation…

Downloads
1,225
Likes
240
Rating
3.57
P
PrintablesMighty Big Car

Milwaukee Packout Compact Organizer Insert For M12 Stapler

It holds the stapler very snugly to keep it from rattling around. Even so, you might want to glue a thin layer of foam to the bottom of the stapler pocket. Configured for a stapler with the belt clip on the left side; if yours is on the…

Downloads
1,220
Likes
159
Rating
5

M12 Nut and Bolt Set

STL's show them upright, slice and print them flat (with threads parallel to the z-axis) The length of the bolt is 30mm (including the head, 20mm thread). Thread info; GB Metric Profile 12.0mm M12x1.75 6g Right-hand direction

Downloads
1,204
Likes
35
Rating
3.75
P
Printablesmriv

Milwaukee M12 Modular Tool Mounts

Updated on 8/28/2024. Added additional models, added spacers to adjust for tool size, and made some recommended changes to the rotated mounts. These tool mounts are designed for Milwaukee M12 tools. They allow mounting single or multiple…

Downloads
1,187
Likes
182
Rating
4.83

Milwaukee M12 batteryholder

Milwaukee M12 batteryholder - Mountes with two screws - Vertical or horizontal

Downloads
1,109
Likes
158
Rating
4.5
P
Printablessmlimbach

4 x Milwaukee M12 Battery Holder

My neighbor who works for a glass company asked if I could make a holder that he could mount 4 of his Milwaukee M12 batteries on his tool carrier in his truck. I printed in PLA and told him to let me know if it doesn't hold up in the heat…

Downloads
1,095
Likes
119
Rating
5
P
PrintablesScott Wright

Milwuakee M12 Charger - Batttery Packout Insert

This insert will hold 5 M12 Batteries (3 CP Type and 2 XP type) and the standard M12 Charger in a Milwaukee 48-22-8435 Packout. It is offered as a single model and as two pieces that can easily be printed on most printers. I print this in…

Downloads
1,093
Likes
202
Rating
4
P
Printablestiz.io

Milwaukee M12 Battery Cable Adapter

This plate works with the Milwaukee M12 universal battery adapter from doublec4 . It is designed to use two 5209 clips and two 1221 tabs . Depending how you mount your terminals, it may be possible to reverse polarity. Be sure the wire is…

Downloads
1,079
Likes
113
Rating
3.67
P
PrintablesKevin Scott

Bosch GCM12SD Axial Glide Miter Saw Zero Clearance Insert

I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.

Downloads
1,077
Likes
118
Rating
4
P
PrintablesZach Tish

Milwaukee Packout M12 Hacksaw Insert

This is my version of a 3D printed Milwaukee Packout insert that will hold the Milwaukee M12 Hacksaw. I used the Milwaukee Packout Compact Organizer insert designed by @ChadBaker_317227,…

Downloads
1,055
Likes
185
Rating
5
P
PrintablesAlluP

Nut Knob Heavy-Duty (M6–M12) – High Torque Nut Knobs

Insert your standard hex nut or screw, press-fit ⭐ Fits standard hex nuts from M6 to M12 -Designed with deep finger grooves and certain shape for maximum torque and grip -Optimized for hand tightening in tool-free applications Print…

Downloads
992
Likes
279
Rating
4.8
P
PrintablesAMTprojects

Screw measuring tool, Metric M1.6 to M12

What it is A compact tool to determine the size and length of screws & bolts. In contrast to other designs it offers a unique cylindrical design which packs additional features like measuring flathead screws and corresponding nut sizes on…

Downloads
969
Likes
571
Rating
4.86
P
PrintablesDaniel

Milwaukee M12 Gerätehalter

Milwaukee M12 Gerätehalter zum Schrauben

Downloads
962
Likes
138
Rating
0
P
PrintablesCode_Craft

Milwaukee M12/M18 Charger Wall Mount

Constructed using PETG filament for durability, this mount features a 0.2mm layer height, 4 walls, and 25% gyroid infill to ensure robustness and longevity. Easy to install, it’s an essential upgrade for any professional or DIY workspace,…

Downloads
959
Likes
136
Rating
5
P
PrintablesEistee

Gridfinity Bin Labels Flat-Head cap screw hex socket ISO 10642 former DIN 7991 M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20

The length on the label is to scale, otherwise it is cut in the middle. The shaft diameter and head are not to scale as this look awkward on the small labels. I sticked with the text style of the original labels by the user @Pred_457770 .

Downloads
915
Likes
237
Rating
5
P
Printablesksuszka

Milwaukee M12 Battery Case

This is a replacement case for Milwaukee M12 battery (3 cells type). It uses an original battery cap. The original battery case has very thin walls where two parts of the case are joined. Mine broke in a few places. Printing/assembly tips…

Downloads
907
Likes
166
Rating
0
P
PrintablesJuiceTech

Milwaukee M12 Drill Holder

Just a bigger hole. Photo has the original holder on the left and the modified one on the right. THIS MODEL FITS THE DRILL WHILE THE ORIGINAL FITS THE IMPACT DRIVER.

Downloads
889
Likes
122
Rating
4.67
P
Printablestato_713

Samsung Galaxy A02, A04e, A12, F12, M02, M04 & M12 case

Originally published here: Samsung Galaxy A02 & A12 & F12 & M02 & M12 case by tato_713 - Thingiverse This case was designed for the phone Samsun Galaxy A12, but by its size, shape and button places, its compatible with the A02, A04e, A12…

Downloads
886
Likes
24
Rating
5
P
PrintablesPhylius

Milwaukee m12 Battery Adapter no error

ORIGINAL DESIGN BY RADRED Design . Thank you very much for your work.

Downloads
856
Likes
58
Rating
5
P
PrintablesCode_Craft

Stabilized Milwaukee M12/M18 Charger Wall Mount

This is a v2 of my original Milwaukee M12/M18 Charger Wall Mount. This version offers stability for the charger to rest on to avoid wobbliness when charging your batteries. I've added side stabilizers following the overall shape of the…

Downloads
854
Likes
69
Rating
4.67
P
PrintablesTuna

Milwaukee - M12 Soldering Iron Wall Mount

This is a mount I came up with to hang my soldering iron on my cart.

Downloads
849
Likes
126
Rating
5
P
Printablesjasondilts

Milwaukee M12 Tool Holder

I needed a way to store my 3 batteies and my impact driver and ratchet. I wanted easy accessibility, and didn't really want them taking up room in my tool box drawers. I added a second model, this one doesn't have the logo as part of the…

Downloads
807
Likes
106
Rating
5
P
Printablesksuszka

Milwaukee M12 lantern/torch

This is a lantern-type flashlight for Milwaukee M12 battery. It is my first design made with Fusion 360, so the quality of it may be questionable, but if you want to use it, go ahead. BOM To assembly it, you will need: 3d printed base - a…

Downloads
807
Likes
230
Rating
5
P
PrintablesEistee

Gridfinity Bin Labels Threaded Insert M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20

The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame There is no pictogram for threaded inserts as far as I know of, so I came up with this design. Print it…

Downloads
787
Likes
153
Rating
4.75
P
PrintablesMr. Furious

Milwaukee M12 battery Foot

Here is an M12 battery foot to attach to your smaller m12 batteries. This will help them from tipping over when you set them down. to attach the battery simply use a few strips of electrical tape and push it the base. This will create a…

Downloads
779
Likes
182
Rating
4.75
P
Printablesfreakstuff_de

Knob for metric nut of DIN 934 - M3, M4, M5, M6, M8, M10, M12, M14, M16, M18 and M20

A thread is inserted into the handle during printing by inserting a DIN 934 nut. Depending on the size and the layer thickness set, a corresponding pause must be added in the slicer directly before the layer over the nut . In Bambu Studio…

Downloads
749
Likes
98
Rating
5
P
PrintablesWorldspawn00

Bit holder for Milwaukee M12 3453 Impact Driver

Remix of the original design for the newest generation tools, modified the screw hole size to for the 6-32 screw used on the new models. Also added optional retaining magnets 5mmx3mm behind the bit locations to keep the bits from working…

Downloads
740
Likes
112
Rating
4.8

Universal Adapter for Odin M12 Sidewinder

Fits into an Odin Innovations M12 Sidewinder and allows you to easily fill any mid-cap mag faster than any other speed loader. Print with supports from the flat cylinder surface, supports can be easily removed and won't cause problems if…

Downloads
711
Likes
34
Rating
4.75
P
PrintablesEistee

Gridfinity Bin Labels Hex Nut M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20

The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-l Print it at 0.2 mm layer height and make a filament change in layer 3.

Downloads
701
Likes
147
Rating
5
P
Printables3DPrintDemon

SOVOL SV08 M12 Inductive Probe Mount LJ12A3-4-Z/AX

…Please be sure to hit like & post a make, I'd love to see your prints! Add a highly accurate M12 LJ12A3-4-Z/AX inductive probe to your SV08! This probe is a NPN NC probe. This means it is normally closed & will provide a “low” signal…

Downloads
683
Likes
146
Rating
5
P
PrintablesDaniel Coonan

m12 battery vertical wall mount

fits m12 batteries. Wall mount with hidden screw hole. Works well with drywall anchors or directly in a stud. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .3 Infill: 20% Notes: I did 5 wall…

Downloads
681
Likes
63
Rating
5
P
Printablesnagromnewo

Milwawkee M12 Battery Holder

Remixed from the Milwaukee M12 battery holder and wall mount by Alioth to give it a stronger back plate. I only needed a holder for three batteries, so didn't remix the other sizes. I used two countersunk screw holes which should be…

Downloads
665
Likes
47
Rating
5
P
Printablesmikeeel

gear/shift knob M10x1,25 / M12x1,25

gear/shift knob M10x1,25 / M12x1,25 size 42mmx42mmx138mm printed in petg

Downloads
665
Likes
47
Rating
5
P
PrintablesMatteo

Samsung Galaxy A12/M12 case

Phone Case A case for Samsung Galaxy A12/M12. If you want to print it in TPU I recommend the V1 because you don't have to use supports to print it, the V2 is prettier but I wouldn't print it in flexible materials since the supports are…

Downloads
663
Likes
24
Rating
4.33
P
PrintablesEistee

Gridfinity Bin Labels Washers M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20

The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame Print it at 0.2 mm layer height and make a filament change in layer 3.

Downloads
661
Likes
134
Rating
5
P
PrintablesCPS_Systems

Milwaukee M12 Charger 12V Wallmounts Damage Free, Skadis, Screwless option

Some-thing to safely wall mount my spare Milwaukee M12 Charger using command strips in a more convenient location. And more options for mounting on various surfaces. Note: Using a minimum of 5 perimeters seems to get the best transition…

Downloads
654
Likes
96
Rating
5
P
Printablesvas__design

Milwaukee Compact Packout Organizer Insert for M12 Impact Driver & Charger, 2 Batteries & Bit Case

Insert to hold an Milwaukee M12 Impact Driver, 2 batteries (one in driver, 1 in insert), charger (with UK plug), Milwaukee hex bit case. There is additional storage underneath the charger and the impact driver which can be accessed by…

Downloads
645
Likes
148
Rating
0
P
Printablesungineering

Milwaukee M12 Fuel Drill bit holder

The bit holder slips on the drill, no screws or modifications to the drill required. It'll work with or without the belt clip.

Downloads
643
Likes
117
Rating
5
P
PrintablesMarkus

Parametric M12 Screw and Nut

This is the parametric version of the Hex Screw and Nut from “my” screw toys for kids (upload with more parts and the screw drivers will follow soon). Print Settings: Layer hight: 0.2mm (otherwise the threads might bind) Supports: No…

Downloads
641
Likes
37
Rating
5
P
PrintablesWarglock

Milwaukee M12 & M18 Combo Charger mount.

EDIT 1/31/2021: After having an interaction with the original designer, I opted to remove my modified hooks with built in pegs and went with SVideo's original design and stuck with his logic in having separate parts to facilitate proper…

Downloads
627
Likes
92
Rating
3.67
P
PrintablesonlyJ35T3R

Voron Stealthburner CW2 M12x1,5 Umbilical Cable Holder

Simple M12x1,5 Cable Holder for Umbilical with Can-Bus. BOM: 1x M3x20 SHCS 1x M3x8 SHCS 2x Heat-Set Insert M3x5x4

Downloads
615
Likes
57
Rating
0
P
Printablesjr3gibbs

M12 Milwaukee battery holders

M12 Milwaukee battery holders. A 4 battery holder and a 2 battery holder Screw holes spaced for pegboard

Downloads
614
Likes
54
Rating
5
P
Printablesfreakstuff_de

Slim knob for metric nut of DIN 934 - M3, M4, M5, M6, M8, M10, M12, M14, M16, M18 and M20

A thread is inserted into the handle during printing by inserting a DIN 934 nut. Depending on the size and the layer thickness set, a corresponding pause must be added in the slicer directly before the layer over the nut . In Bambu Studio…

Downloads
578
Likes
52
Rating
5

Milwaukee M12 Battery Holder

Useful battery holder for milwaukee m12 battery.

Downloads
575
Likes
67
Rating
5
P
PrintablesYangorang

Power Tool & Battery Slatwall Mounts for Milwaukee M12

A collection of mounts for mounting Milwaukee M12 tools onto Slatwall. They may look thin and flimsy but you'd be surprised how strong these are even in basic PLA if you print these with a lot of perimeters. I used a 0.2mm layer height…

Downloads
573
Likes
94
Rating
5
P
PrintablesWiseone

Hollow Bolt and Nut M12

This is an M12 screw and matching nut design with an extra feature, it has a cavity hole of 6.8mm. The thread is 1.75mm pitch. This can be used to pass 3D 1.75mm filament through it. The cavity hole is sized to accept a small garden…

Downloads
563
Likes
29
Rating
5
P
Printablesmptrs

Milwaukee M12 battery holder for Ikea Skadis

Another Milwaukee M12 tool related remix. As I did not want to drill this one into the wall, but I wanted to use it with my Skadis which is hanging inside my Ikea Ivar. So off to remixing this one with the T-Nuts system. Because I have 4…

Downloads
544
Likes
80
Rating
5
P
PrintablesJer

Metric Screw Spacer Mega Pack 1 - Sizes M1.6 - M12

Parametric f3d included for making custom sizes. These spacers are designed to match the width of the screw head. Public domain license. For larger sizes get the Metric Screw Spacer Mega Pack 2 - Sizes M14 - M64

Downloads
537
Likes
86
Rating
5
P
Printablesfirepower

M12 M16 M20 Nut

M12 M16 M20 Nut Print Settings Printer: E3D V6 Rafts: No Supports: Yes Resolution: 0.2 or less Infill: no Filament: generic any Notes: print in smallest resolution your printer can print for better threads Category: DIY

Downloads
516
Likes
8
Rating
0
P
PrintablesTeeMuumi

Shift knobs (M10 and M12 threads)

Here are two shift knob designs with most common thread pitches to choose from: M12 x 1,25 M12 x 1,5 M10 x 1,25 M10 x 1,5 Knob sizes: Knob1: lenght 80mm, diameter 40mm, thread depth 40mm Knob2: lenght 90mm, diameter 40mm, thread depth…

Downloads
510
Likes
30
Rating
5
P
Printableswarpman

M12 battery holder singular

This is just a remix of Milwaukee M12 Battery Holder by BPC, I just needed one not 3 in a row so I figured someone else might as well. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill:…

Downloads
504
Likes
40
Rating
5
P
PrintablesGriffin

Milwaukee M12 Rover

When you go to Home Depot, walk past the Milwaukee section, see the cool flashlights there, and then wish you could add them to your collection but can't justify the purchase? Well, now you can spend your time to money equivalent making…

Downloads
498
Likes
269
Rating
5
P
PrintablesJorg

M12x1.75 Bolts and Nuts

I finally learned how to make proper knurling. I plan to make multiple sizes just because I enjoy making them. This actually make great and silent fidgets. :) After a test print, I decided to take the knurling all the way to a point.…

Downloads
493
Likes
35
Rating
5
P
PrintablesCPS_Systems

Milwaukee M12 5-1 Place 16Wh/2.0Ah Battery Storage Mount Holder (SKADIS)

Remix for Milwaukee M12 12V 16Wh Battery Storage. A little bigger version and wall mounted, 5 (and 4, 3, 2, 1) Place Battery Storage. 5 Place overall build size is 266mm x 52mm! Edit: Added a 4 place (212mm x 52mm) remix. And 3, 2, 1…

Downloads
489
Likes
62
Rating
4.5
P
PrintablesMateusz Tokarz

Nut Cap Set M12 M14 M16 – Dome Covers

BOM: Printed with ROSA3D High Speed PLA Army Green This set contains three dome-style nut caps sized for M12, M14 and M16 hex nuts (24 mm, 22 mm and 19 mm AF). They provide a clean, rounded finish ideal for machinery, furniture, workshop…

Downloads
486
Likes
117
Rating
5
P
Printablesmptrs

Milwaukee M12 tool holder for Ikea Skadis

I found this great tool mount, but I needed it to hang from my Skadis. So I remixed the original with the T-Nuts mounting system and this is the result. For now all my tools hang ok from the standard duty angled forward. But in the future…

Downloads
484
Likes
60
Rating
5
P
PrintablesRADRED Design

Milwaukee m12 Battery Adapter

This is a battery adapter designed for a Milwaukee m12 battery. It was initially developed to use the m12 battery in a 12v ride-on truck. Though, it could be used in any other application needing a rechargeable 12v battery. I printed in…

Downloads
482
Likes
33
Rating
0
P
PrintablesFokieH

Schraubgriff / Screwhandle -- M3 - M12

Antrieb für 6-Kant Schraube oder Mutter um diese Werkzeuglos betätigen zu können. Hierzu einfach die Schraube bzw. die Mutter in den 6-Kant eindrücken und dann verwenden. Hier ist ein ganzer Satz verfügbar (M3, M4, M5, M6, M8, M10 und…

Downloads
470
Likes
113
Rating
5