Search results: m4p

Sort order

Counting matching models…

P
PrintablesJosh

Manta M4P Ender 3 Pro Rear Case

This is intended for the Ender 3 Pro, but will probably work fine on other printers with minor tweaking. My goal was to keep most of the ports accessible. The internal USB one may be usable with a 90-degree USB cable. Ferrule connectors…

Downloads
513
Likes
50
Rating
5
P
Printablesboodaah3d

BIGTREETECH Manta m4p control board mount for 2020 extrusion

I'm converting an Ender 3 Pro to a Voron Switchwire and I bought the BIGTREETECH Manta M4P/M8P Control Board (https://biqu.equipment/products/manta-m4p-m8p). I needed a way to mount the board in the electronics area so I made this mount.…

Downloads
298
Likes
22
Rating
5
P
PrintablesMP3D

Manta M4P

Update: 12/05/2023- ADD step files As there was no case for the Manta M4P, I designed my own version. With this setup, the EXP connectors are inoperative, I can change the box if someone wants to use them, it's a matter of changing the…

Downloads
287
Likes
39
Rating
5
P
PrintablesRenato

Pedana Kugoo M4pro

Pedana per monopattino Kugoo M4pro con triplice funzione di poggia piede, maniglia per sollevare il monopattino e contenitore per l'allarme. Doppio punto di fissaggio; Alla pedana ed agli ammortizzatori. Da stampare in PETG - ABS - ASA…

Downloads
219
Likes
9
Rating
0
P
Printables3dKaos

BTT Manta M4P Din Bracket Mount - 35mm DIN

Remix of Cave-Tech Manta M4P mount to be used on a 35mm din rail using the Din Rail Bracket by Fabian. Using M3 bolts to secure the DIN bracket to the Manta M4P mount. Attribution to: Manta M4P Mount Bracket for the Voron Switchwire by…

Downloads
167
Likes
13
Rating
0
P
PrintablesCave-Tech

Manta M4P Mount Bracket for the Voron Switchwire

The bracket is designed for the Voron Switchwire so that you can mount a Manta M4P board in the Switchwire.

Downloads
159
Likes
17
Rating
5
P
Printablesmomsz

BIGTREETECH Manta M4P simplified board

The BIGTREETECH Manta M4P is a simplified version of the original model based on the source code available on GitHub. This motherboard includes the main components but does not feature many SMT components.

Downloads
156
Likes
7
Rating
0
P
PrintablesGuilouz

FLSUN Super Racer Manta M4P Mount

FLSUN Super Racer Manta M4P Mount

Downloads
120
Likes
24
Rating
0
P
PrintablesRolls17

Manta M4P Backpack

This case is designed to attach to 2020 extrusion through the back using 2 m5x10 and t-nuts. The lid is fastened with 4 m3x10 (or 8, 12, &16) screwed into the plastic. There are two lids to pick from, one that uses a single 80mm fan, or…

Downloads
117
Likes
11
Rating
0
P
PrintablesKieran E

Ender 3 V2 enclosure for Manta M4P

Overview: This enclosure fits a Manta M4P and 2 4010 fans to your Ender 3 V2. This model uses M3 heat-set inserts to help secure the motherboard and top pieces - you'll need to edit the STEP files if you want to bolt directly into the…

Downloads
106
Likes
23
Rating
5
P
Printablestim2002

biqu m4p manta ender 3 pro

This is a remix of the original case by teaching tech. Things I used Noctua 80mm fan 2x DCDC converters 10x M3x6 6x M3x8 1x M3x20 CSK socket cap screw 1x M3x20 socket cap screw 16x heat inserts M3 (3mm thick) print settings: layer height:…

Downloads
97
Likes
13
Rating
0
P

Rook MK1 M4P adapter

Fit your BTT Manta M4P on your Rook Maybe use a little supports Like my work? Support me on Ko-fi!

Downloads
63
Likes
13
Rating
0
P
PrintablesTeachingTech

Ender 5 BTT SKR M4P Manta mainboard adaptor

SKR Manta M4P mainboard I made a video guide to using this mainboard and Pi substitute: Please note that the M8P board is a similar concept, but has a different mounting pattern so is incompatible with this adaptor without modification.…

Downloads
59
Likes
14
Rating
0
P
PrintablesNadir @ CN3D

BTT Manta M4P for Sovol SV06 and SV06 Plus on Steroids

Electronics Enclosure for Sovol SV06/SV06 Plus Upgrade your Sovol SV06 or SV06 Plus with this custom electronics enclosure, designed for the BTT Manta M4P . This compact enclosure replaces the stock housing while using the original hinges…

Downloads
57
Likes
15
Rating
0
P
Printablesmomsz

BTT Manta M4P Ender 3 S1

This enclosure is for the Ender 3 S1 power supply and the BTT Manta M4P Motherboard. I printed this out of PLA with .2mm layer height and tree supports. You might be able to get away with no supports but I found there were some areas that…

Downloads
55
Likes
12
Rating
0
P
PrintablesLsHallo

Manta M4P - Sovol SV06 (Plus) Case + Mount

Modified version of the case to use a 92mm fan on top and use to the original mounting points on the SV06. Has a little shelf at the top to fix the extruder flat cable with a zip tie. Optionally can mount an SMA extension for an external…

Downloads
55
Likes
11
Rating
5
P
PrintablesKnyte Tech

Ender 5 Conversion (Manta M4P, Direct Drive, Rear Mounted Electronics)

THIS THING IS A WORK IN PROGRESS - PICTURES AND IMPROVED INSTRUCTIONS TO COME LATER. About: I bought an Ender 5 years ago and have never been satisfied with it's performance - the print quality was fine, but it was wobbly, slow, and I was…

Downloads
51
Likes
8
Rating
0
P
PrintablesEddieSha

Ender 3 - M4P Electronics Enclosure

Ender 3 enclosure for BTT Manta M4P for use with CB1 and SPI35 Screen. Main case spilt into two parts for 250x250 beds. Single case piece fits on a 300x300 bed but warping can be trouble some which is also why I decided to split the case.…

Downloads
48
Likes
17
Rating
0
P
PrintablesOBqt

BTT Manta M4P mount for Ender3 NG1.2

Bigtreetech Manta M4P mount on din rails for the Ender 3 NG 1.2 printer. Make use of the standard din rail mounts available in the Ender 3 NG project. It uses M3 screws, without brass insert, directly screwed into the plastic.

Downloads
42
Likes
9
Rating
0

Enderwire BigTreeTech M4P mount / Fysect U2C can mount / 8010 fan mount

This is a mount for the M4P in the Switchwire. It's REALLY tight. You need 90º USB adapters to use the USB ports on the M4P, but this blocks the Ethernet port. Installation: I also added a mount for an 8010 fan to cool the steppers, this…

Downloads
36
Likes
4
Rating
0
P
PrintablesBruce Tuller

Enderwire M4P mount

Mount made to put a BTT M4P into an Enderwire conversion.

Downloads
25
Likes
5
Rating
0
P
PrintablesLoLorenzoBC

Mount for BTT Manta M4P for Rook Mk1 3D printer

Wanting to mount a Big Tree Tech Manta M4P on the Rook MK1, I coudn't see any other models, so made one

Downloads
18
Likes
3
Rating
0
P
PrintablesOmphteliba

Ender 5 electronics Case - Manta M4P Lid

I wanted to print the lid for the Manta M4P on my Ender 3, but it is too big. So I chopped it up into two pieces.

Downloads
18
Likes
3
Rating
0
P
PrintablesSaphir

Desiccant canister M4P and Prusament

I primarily use filament from Prusament and Material4Print at home. The desiccant containers I’ve used so far usually didn’t fit well, making it impossible to store the spools in their original boxes. When I saw the model by kennyd1gital…

Downloads
15
Likes
0
Rating
0
P
Printables53Aries

Qidi Q2 Manta M4P Mount

Just a simple mount for the Manta M4P in the Qidi Q2.

Downloads
13
Likes
2
Rating
0
P
Printablescjairrels

M4P Case stand

A stand made for the M4P case, can work with vertical or horizontal positions.

Downloads
13
Likes
1
Rating
0
P
PrintablesKaffon

Renkforce RF2000 BTT Manta M4P adapter

This Project was merged with my "Renkforce RF2000 Voron Conversion WIP" so please go there for updates.

Downloads
12
Likes
1
Rating
0
P
PrintablesCova

BTT Manta M4P Mount for Rook MK1

A bracket to mount a BTT Manta M4P in a Rook. It fits into my modified/over-sized Rook frame with plenty of room to spare, but needs the printed standoffs to make a bit of extra room in a stock Rook.

Downloads
6
Likes
0
Rating
0
P
PrintablesDaDuckman

Qidi X-Plus3 BTT Manta M4P adapter bracket

My stock control board got zapped, had a Manta M4P lying around and did not want to pay $200 for a new board. I will upload printer config files and guide once I fully finish the conversion. Should be compatible with the X-Max3 and…

Downloads
5
Likes
1
Rating
0
P
PrintablesMacLemon

Rackmount GL.iNet Comet X (GL-RM4PE) and ZyXEL GS1920-8HP Brackets

Mount your network KVM next to a small switch within the same 1U. These parts allow you to mount these specific devices next to each other in 1U saving vertical space in your 19″ rack. GL.iNet Comet X (GL-RM4PE) Quad-Port Remote-KVM with…

Downloads
0
Likes
1
Rating
0
P
Printables

Qidi X-Plus3 BTT Manta M4P adapter bracket

My stock control board got zapped, had a Manta M4P lying around and did not want to pay $200 for a new board. I will upload printer config files and guide once I fully finish the conversion. Should be compatible with the X-Max3 and…