Tokyo Marui 5.1 Hi-Capa Magazine Base
Tokyo Marui 5.1 Hi-Capa Magazine Base
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant
- Downloads
- 387
- Likes
- 16
- Rating
- 5
Counting matching models…
Tokyo Marui 5.1 Hi-Capa Magazine Base
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant
Picatinny rail for placement of red dot sight on Tokyo Marui Hi-Capa airsoft pistol. best result when printed horizontally with supports and picatinny rail facing up. Less supports needed when picatinny rail is facing down but finish is…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
This airsoft gun can be assembled with a dedicated optical sight, but I have a generic one and wanted to put it on, so I made this one. The higher position of the optical sight may cause it to deviate from the adjustment range. Once this…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
!!!DO NOT USE THIS MODEL IN A REAL STEEL FIREARM. THE PART MAY NOT WITHSTAND THE RECOIL FORCE AND COULD DAMAGE THE WEAPON OR CAUSE INJURY!!! The model is designed exclusively for gas-powered airsoft replicas. This model serves primarily…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
Sanrio Cookie Cutter Set - Hello Kitty - My Melody - Kuromi - Badtz-Maru The cookie cutter is around 75mm Its a 2 piece item, one for cutting the cookie dough and one for modeling . Print with 100% infill
AUTOMATION SYSTEM With this kit you can automate some* Ironman helmets ( it may depend on the helmet design) I'm open to improvements so please help me with your feedback and leave your comment and post a photo of your make :) These…
The source marked this model as adult content.
Akamaru the best dog. Original link : Thingiverse : https://www.thingiverse.com/thing:3896224
u need to buy a 30x8x0.5mm spring kupple of bolts and nuts in m4 and m5 and superglue and a 8mm aluminium rod
Badtz-Maru (バッドばつ丸, Baddo Batsu Maru) One of Hello Kitty Friends Multicolour parts model Category: Sculptures
UPDATE - Also fits Well Pro AK12 . Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some…
I Designed this part to assist with holding my cup of noodles like I would with a jug or a mug
Couldn't find any holsters online that I liked, so I designed this one. It locks the replica in place by a little indent, holding it securely in place. Printed in PETG, as it needs a little flex for the indent to work best, I'd assume. I…
In addition to the adapter you need x2 M3 short brass inserts to be installed underneath so that you can use the original screws of the TM Micro Red Pro Sight to secure the red dot to the adapter (needless to say you need to remove the…
Designed to be printed in 2 colors, Black and White, paint feet and beak then. Infill: 10%
Update (11/25/18): Added threads for the outer barrel to screw into. Replacement front sight for Galaxy/Tokyo Marui/CYMA MP5k Will NOT fit standard MP5 Plan on making a removable sight indicator for this part if it happens to get shot…
Badtz-Maru (バッドばつ丸, Baddo Batsu Maru) You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports, hollowed and drainage holes Category: Sculptures
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro vás velmi šikovnou plničku na zasobniky Glock 17/18/19 od firmy WE, Marui,Umarex... Jine znacky jsem nezkousel, ale treba se pouzit da. Plnička je ze dvou kusu.…
Meet Count Meowcula, a little bat cat with big eyes, tiny fangs, and plenty of charm! With pointed ears, bat wings, little paws, and a long segmented tail, this spooky companion is ready to claim a spot on your desk or shelf. The pictured…
Printed at 0.16mm with silk gold Amazon Basics PLA. My first sword from reference to print! Inside of blade can fit a 5-6mm dowel for support. Create your own custom hole when slicing. Multi-color used on the blade for the first bottom…
If your Marushin M1 Garand collector airsoft gun has snapped its hammer in half, then this replacement can get you up and running again. The hammer in the trigger assembly strikes against the gas valve knockers to start the blowback…
this funnel is made for the Tokyo Marui M4 styled BB speed loader. but my guess is that is works on the clones of this model by there brands as well. it’s nothing fancy but is helps a lot with widening the feed mouth of the speed loader…
Inspired by earrings worn by anime character Orochimaru from Naruto Shippuden. These can print in one print, with supports. My plate setup is included, although I think there are better orientations. I printed 0.10 mm layer height.…
Note: Part is still being tweaked/optimized, but it's fully functional! Check back for updates. Obsolete models are deleted and replaced with the latest version. Post feedback so we can improve and keep these collector replicas running!…
Update : 14mm make thread smaller (-0.1mm) not smooth as stock recommand use strong filament like pla+ 11mm version = 11x0.75mm thread cw 14mm version = 14x1mm thread ccw
Edit 8/1/22: New reworked design with fewer parts. New channel internally, which feeds BBs more reliably. New lips which help prevent double feeding. New follower design for more reliable clip ejection and easier loading. Decorative back…
The internal dimensions of the mag box are 63.3 x 23.2 mm. Real steel AR15 magazines will not fit inside, just airsoft GBBR M4/AR15 mags. Printed this on Prusa Mini with PLA. Edit. Version 1 added with little improvements.
As in the title, replacement parts to be 3d printed for FE Tokyo Marui M4 MWS HPA GBBR conversions, gen1. For details see video: https://youtu.be/4tIAl2I3ync
*Also fits Golden Eagle and Marushin M1887, only 6mm BB version . Unlock the potential of your S&T M1887 by using 3D printed shells that shoot more BBs and cycle better than the OEM shells. The shells are available in different sizes, 1…
Tokyo Marui Dual Stainless Holster with Tactical SF XC1 Flashlight To fix the lock, it needed a piece of a paper clip 37mm. And you can make a hook on the clip to a better fix. Suggested config print: layer height: 0.2 wall loops: 6…
Silencer adapter for marui LCP2. Thread M11x1. I printed it from ASA.
Hello, Here is a replacement part, I printed it in PETG but ABS/ASA wold works fine too.
The Spin Sword (Shinkenmaru) for the Dummy 13 Model. From Power Rangers Samurai & Samurai Sentai Shinkenger. Prints in two parts. Scaled to a standard D13 Model (100%). No supports needed. Brim on Guard/Blade. 0.16mm. All my other Dummy…
This is a momento mori, combing a bust of Marcus Aurelius, Emperor of Rome and noted stoic philosopher, with a human skull. (See credits.) You will need supports for this build! Be judicious, though. If you let it go automatic prusaslicer…
Don't know why, but this was one of the most requested adapters?! Print it for yourself or for friends. Use it, love it and leave a like. I used a “Pro Shop Speedloader” to design all of my Speedloader Adapters, it will work with…
I made a hollow Tama bobbin for my wife so that we would wight it by filling it, in this case with sand, it is about ~23 grams, with steel bbs is hits about ~52 grams. I designed after the traditional wooden Tama bobbins used on a…
Second try on making 3D Pokémon. I hope to see your printing of this model if you liked it. If there's any problem with this model you can share with me.
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro vás velmi šikovné pouzdro, sumku na 2 kusy zasobniku Glock 17/18/19 WE, Marui, a dalsí. Pouzdro je ze dvou castí a tak je potreba prisroubovat vrutem cca m3x10mm…
This Speedloader Adapter was made possible through the help of Björn from "Pfitzner Waffen", who was an absolute Lad and provided the magazine. Be a trooper and give him some love! His Store → https://www.pfitzner-waffen.de/ ---Don't you…
Pistol holster for airsoft tokyo marui lcp2. Fits with a 23mm silencer. Maybe it also fits the original ruger lcp2, but haven't tried it. you will need: - nail 1.5x25mm - spring from a pen - M6 screw and nut for fixing the clip The clip…
Scaled to a standard D13 Model (100%). Prints in 2 Parts, no supports required. Glue is optional. Check out my first full size prop: Tachikaze ! All Dummy 13 BLEACH models can be found here . All my Dummy 13 models can be found here .
Customize your Skadis Pegboard With Badtz-Maru!
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro vás sumku na opasek na zasobniky Glock 17/18/19 od firmy WE, Marui,Umarex... Jine znacky jsem nezkousel, ale treba se pouzit da. Vytištěno bez podpěr!!! Pokud vás…
Printed on a MK3S: Height: 0,10 Infill: 25% - Gyroid Perimeters: 5 Material: PLA Printed with supports (auto generated in Prusa Slicer). Place the notch flat on the bed. You need to reuse the existing flat bar that is screwed on the…
Meet Stitched Monster Cat, a little creature with plenty of cattitude! With a stitched forehead, side bolts, tiny paw pads, and a long articulated tail, this grumpy kitty brings a playful touch of spooky charm to your Halloween display,…
Simple Mlok Rail Piece for the TM MP7 to replace the Picatinny rails. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Supports: Doesn't Matter Resolution: 0.2 Infill: 35 Filament: Any PETG works best Any Category: Other
Remix of https://cults3d.com/en/3d-model/gadget/cym-t0ky0-m-rui-m14-ver-7-gearbox-tappet-plate The printed version is still not quite strong enough to last in a gearbox for an extended period of time.
Redesigned the Marui classics' diff and idler gears with larger gear module and tooth strengthening side supports (with gear pitch diameters). Depending on the motor torque, might be ok in PLA, use Nylon if higher strength is needed.…
I printed it at 350% scale, and the overall lines came out well. I also cut it into pieces so that someone can paint it more easily. It took 8:41 minutes and 191g of filament.
A lid for Instant Noodle soups. Has Maruchan logo on top. Please don't sue me. Print upside down with no supports. Lower layer height is better. Category: Kitchen & Dining
I modeled the Marui Big Bear tire as close of it I could make it... When looking to print it I scratched my head : no way to print it without supports, and supports in TPU are quite are not going to help the tire is big, so no way it…
This is the Jumaru (Juohmaru) figure from Plawress Sanshiro manga for all of us 80s kids who where lucky enough to watch the series. Printing I have separated parts into different color plates for easy printing. The Hands and Face Plate…
A user on Thingiverse reached out and asked for this model so I added it to my list and put it together. This mini is based on Orochimaru from Naruto. Kinda has some grim Keanu vibes but overall I think it turned out OK. If you would like…
Beside my work to reproduce some tires for the Big Bear, I had an urgent need for tires for an experience on a track with some refined gearbox. A tire easy to find is the Lunchbox tire, but the orignal Big Bear tires are larger, so you…
Pure scan - in process
Printable help for drilling screw hole for NPAS valve for DIY Tokyo Marui MWS GBBRs allowing muzzle energy setting. See details in video:
recambio cañon interno mp7 de tokio maruy
Open Source Articulated Figure – Juohmaru (Plawres Sanshiro) A fully articulated, 3D printable figure inspired by Juohmaru — released for the community to improve. AI has been used to generate some parts which were later refined with…
A modell of Kobayashi Maru from Star Trek 2009.
Maruthi K10 cap for water storage tank for wiper. This is the replacement part for Maruthi K10 car wiper water storage tank. The original one eaten by the RATS. The cap was not available in the market. Hence decided to design our own and…
Steering wheel for Marui Super Wheelie/CJ-7/Land Cruiser Category: R/C Vehicles
Replacement parts for Frog Engineering Hi capa Tokyo Marui system conversion,all brands. Details can be found here:
Easy to print support bushings that are meant to be inserted on either end of the lower gas tube of the Marushin M1 Garand airsoft gun. Some scaling may be necessary to perfectly and snugly fit your M1 Garand.
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
The hole for the socket is 38.5 mm in diameter and 55 mm deep. Remember to print the lampshade in vasemode. https://www.instagram.com/p/DJAGy33tkYG/
Unlock the potential of your Maruzen M1100 by using 3D printed shells out of TPU. The strong layed adhesion of TPU will prevent the shell rim being ripped off when cycling, while at the same time reducing wear of your "almost museum piece…
So there's a drum mag for Tokyo Marui MWS GBBR. I'm not sure the exact name for it, so for reference: https://www.redwolfairsoft.com/gk-tactical-400rds-drum-magazine-for-tokyo-marui-mws-m4-gbbr-black.html…
*Will not work with the M1100! (It will rip the shells apart) Unlock the potential of your Maruzen M870 by using 3D printed shells, while at the same time reducing wear of your "almost museum piece of an airsoft". In testing I found it to…
***My Marui Samurais have either no wheels or wheels in bad conditions. I had to do something.*** * Please note that this was a massive work to get here, and do not forget to feedback or tip me for the work :-), Thanks! * * My criterias…
Main differential gear for Marui CJ7 Golden Eagle / Toyota Landcruiser Super Wheelie. 60 tooth. Print in ABS/Nylon for best strength. Print Settings Printer Brand: LulzBot Printer: Mini Rafts: Doesn't Matter Supports: Yes Resolution: 0,14…
Reverseengineered from scan. Prototype from 2 pcs joined via M2x20.
Idler gear for Marui CJ7 Golden Eagle / Toyota Landcruiser 28t/11t Category: R/C Vehicles
Pull back the lid Add the hot water Pull lid back over And then the lid curls up and your noodles don't finish cooking! Print out this topper (at 100% or 105% depending on tolerances) and add to the top of your cup. Would recommend…
3D printable model of Orochimaru, designed with meticulous attention to detail to reflect the complex and menacing nature of the legendary Sannin from the "Naruto" series. This model captures Orochimaru's serpentine gaze, long, flowing…
WARNING : work in progress!! I've already printed the test fit pieces in two very different materials, on two very different printers, and both fit well. However, that's not enough to be sure the completed object is functional at all. I…
The Marui Ninja 1/10 rc car has one characteristic it shares with the Marui Samurai : front and rear rims are not with the same diameter, making it difficult to find harmonized tires configurations working with both front and rear. I…
A hop-up rubber for Tokyo Marui M92. Print in TPU with brim and 0.1mm layer height. Requires some trimming after print.
Tokyo Marui Scar-L butt plate v1.0
IT'S A DETAILED AND SINGLE PIECE BODY WITH AXLE ATTATCHED. MODIFICATION ON WHEELS REQUIRED. FOR ANY QUERRIES OR ORDERS YOU CAN CONTACT ME ON WHATSAPP - 9961443300
This happens way too often. Backpack buckle cracked after just a few months in use. It happened to my previous backpack , happened to my messenger bag , then I lost my scuba fins buckle and now it's my new backpacks turn I guess. But this…
Canine/dog cage/crate Maru #1 for Kia Niro 2017 Takes 2/3 of the passenger (LHD) side of the trunk leaving 1/3 of the trunk for goods. Does not have bars on the back side to enable emergency exit in case the trunk does not open. Also has…
This is a hello kitty badtz Maru controller stand, an incredible stand for you to put in your gamer setup and leave as decoration. I've separated it into parts for easy printing X:104mm Y:83.3mm Z:110mm
"Quick Detach" Supressor for TM MWS stock Muzzle device Tokyo Marui 4 prong stock muzzle is a little bit different from a SF4P. The body I printed with a Brim and Tree support for collar design. PLA and smth around 20% Gyroid Infill The…
🐰💀 Fleximaru Halloween Bunny, Cute, Creepy & Full of Character! Meet Fleximaru Halloween Bunny, a spooky little companion with long bunny ears, a skull inspired face, X shaped eyes, and tiny skeleton details. A segmented tail decorated…
I got one of my Samurai without a wing. I decided to model it to print it in Nylon PA12 using SLS process, expecting it to be more robust than a lexan wing Category: R/C Vehicles
Printed with ABS and sanded the top surface with 220 grit before applying the bleach. I used ABS because I have a spool I never get to use, but any material should be fine! Related links: Original post about bleach printing with…
Thinking of cute gifts for the one you like or close partner? This little key chain featuring Chi-bi Maruko and Shin Chan could be a good option. Cute style, double sided, 4 colors to prints, easy to carry wherever you go!
*Only fits Marushin M1887, 8mm BB version . *Seals confirmed to work with 98 & 95a TPU Unlock the potential of your S&T M1887 by using 3D printed shells that shoot more BBs and cycle better than the OEM shells. The shells are available in…
This will allow you to have some guide for your mock piston so that it will seat properly at the end of the cycle. This is great in the case you dont want to run a gas tube but still want to ensure your model cycles correctly. This will…
My Shogun don't have its battery door, and I have a Ninja. I modeled the Ninja door, and from there modeled the Shogun doors. Both can be used on both cars. It is also working for the T-Bird Coors using the same chassis Category: R/C…
easy installation: push out original front sight slide on 3D print secure in place with printed 'Key' optional: secure in place with PCfan-screw (+/- M5 x 10mm (see picture)) for additional strength. add (gun)grease to thread when…
Remixed the motor holder to fit the SkyRC Leopard brushless motor, may also work with other brushless motors that have the phase wires coming out from the side. Supports needed, rotate the model in slicer to appropriate printing…
Work in progress, print a bit smaller if hard to fit depending on your printer. Testing stronger material then PLA, because tooth are bending. Original model tooth distance was wrong, made teeth brake when changing fire mode.
Here is the Part No.42 for the Tokyo Marui KSG12 airsoft shotgun, tested and working on my KSG.
A stand (box) for the Alice, Marusya, or Sber Box smart speaker. Serves as an additional accessory for the smart speaker. Can be used as a box or simply as a stand. The material is your choice. I used PLA/PETG. Supporting elements are…
CASES With these designs you can transport and install your MARU V2 automation boards. These boards are available on my website: https://carlos3dprint.com/product/maru-v2/ MARU V2 DESCRIPTION Plug and Play solution for helmet automation!…
I did not have the bumper with my Shogun, but the Ninja had it. Modeled it. Also appliable for the T-Bird Coors Untested at this stage Category: R/C Vehicles
My original seal started leaking so I designed and printed this in TPU and so far it works!