Search results: micron

Sort order

286 models

P

Filter Paper Holder for 190 micron Paint Strainers (used in resin printing)

Lightweight, fast-printing strainer holder for when you can't get your hands on a wire model. I've sized it to fit a Monocure 3D 500mL resin bottle. Fusion 360 files: https://a360.co/3g0Qo3L

Downloads
88
Likes
11
Rating
0
P
PrintablesAnton Soliaryk

Dyson v6 attachment micronozzle (Dust Daddy)

This is a remake of As-seen-on-TV item, called Dust Daddy. In principle, it's just some straws and adapter. Straws should be purchased separately from the store. This version uses 9 of them, and they just friction-fit into the holes.

Downloads
26
Likes
2
Rating
0
P
PrintablesMadblam

Sakura Pigma Micron 7-Pen Holder

A minimalist pen holder for 7 Sakura Pigma Micron pens , designed for clean looks and efficient printing. Optimised for 0.6 mm nozzle with single-wall extrusion for a light yet rigid design. Works perfectly with a 0.4 mm nozzle if you add…

Downloads
17
Likes
1
Rating
5
P
PrintablesBenCh

ScientaOmicron VT AFM XA Preamp bracket

Designed this bracket to lift the STM preamplifier up on the ScientaOmicron VT-AFM XA. Both reducing strain on the cable and keeping it safe from being knocked around.

Downloads
4
Likes
0
Rating
0
P
PrintablesTeque5

2023 Shutter Shades Omicron

Quick print glasses for New Year's 2023! Remix Info Primary new thing here is the filament hinge inspired by a different shutter shade remix. The original openscad design was really good but the snap-fit arms were very fragile. I used…

Downloads
602
Likes
83
Rating
4.76
P
PrintablesMrGreaterThan

Micron Z Belt Clip

These little clips are meant to hold the Z belts of the Voron Micron printer in place. They have been remixed from a design by ChenTheDesignMaker over on the Voron users printer mods github.

Downloads
345
Likes
42
Rating
5
P
PrintablesTD1 3D

45 Degree 1515 LED Daylight on a stick V0 Micron+ Extrusions Clips Push fit

Perfect for any Profile running 1515 extrusions 45 Degree 1515 LED Daylight on a stick V0 Micron+ Clips Requires 2 standard Voron heat inserts and 2 6mm M3 screws per light.

Downloads
324
Likes
48
Rating
5
P
PrintablesMark Neysmith

Gridfinity Micron Art Pen holder

Wanted a way to find and store my Micron pens better. This is a nice stackable setup that holds them tight while still allowing easy assess. Fully stackable These are pretty customized to the Micron but happy to share the fusion file for…

Downloads
316
Likes
51
Rating
5
P
PrintablesTeque5

2022 Shutter Shades Omicron

Quick print glasses for New Year's 2022! Remix Info Primary new thing here is the filament hinge inspired by one of the shutter shade remixes. The original openscad design was really good but the snap-fit arms were very fragile. I used…

Downloads
285
Likes
24
Rating
5

Timing Belt Pulley GT2 60t 6mm sleeve for 20t pulley for Voron Micron

Non Printed parts needed: * 5 x M3x8mm flathead screw (https://de.aliexpress.com/item/4001338395909.html) * GT2 20 tooth pulley 6-7mm width with removed cap (https://de.aliexpress.com/item/4001338395909.html) (You can remove the caps…

Downloads
256
Likes
31
Rating
0
P
PrintablesHyperPrints

Micron Top Canopy

I liked the V2.4 top hat mod, and decided to make one for the Micron as well. This is designed for the 180 version, I will likely also add the 120 and 160 versions soon. These are designed to print flat and will fit on the Micron+ build…

Downloads
254
Likes
66
Rating
4.88
P
PrintablesRonny

Cricut Joy Pigma Micron adapter

use this print so you can use your Pigma Micron markers in the Cricut Joy Plotter. I used 100% infill, but less will do I guess

Downloads
249
Likes
37
Rating
0
P
PrintablesCosmonate

Micron Decontaminator Purge Bucket and Nozzle Scrubber

I did this mod specifically for the Micron/Micron+ printers, but it probably can fit any 1515 extrusion printer. Multiple bucket sizes are included. Print using standard Voron settings. M3x6mm screws for mounting. Follow the directions…

Downloads
223
Likes
36
Rating
5
P
PrintablesCool Bean

1515 (Micron) Aesthetic Corner Brace

Clips into place on 1515 extrusion. These won't really reinforce the frame but rather make it look nice. While popping into place, a few of mine cracked along the layer lines, but are still hold just fine. File should already be oriented…

Downloads
218
Likes
67
Rating
5
P
PrintablesKyle 🇬🇧

Micron+ Smol Hex Skirts (With optional Keystone Rear Skirt)

Whilst the Micron+ is an awesome little scaled down 2.4.. the skirt Hex's weren't scaled down enough and looked too big. HartKs slotted Skirts are awesome, but no bestagons??? So I've created these for the Micron+ (Micron 120 in…

Downloads
174
Likes
58
Rating
4.33
P
PrintablesTruWrecks

No Drop Nuts for Micron+ Formbot and LDO

I modified the original No Drop Nuts mod to make assembly of the Micron+ 180 a lot easier. The 10 mm retainer only has one guide that can be easily removed. The retainers hold the nuts in place even without the guides. Two of these can be…

Downloads
168
Likes
25
Rating
0
P
PrintablesBenditandsendit

Dragon Burner Beacon Probe Mount - Micron MGN9H Linear Bearing

TruWrecks has updated this model so that you no longer have to cut the belts while having better clamping power! You can find his model here: https://www.printables.com/model/941344-dragon-burner-beacon-probe-mount-v2 Thanks for helping…

Downloads
167
Likes
29
Rating
0
P
Printablescyberal

Blobifier for Micron (shorter base, rack and pinion tray and 1515 extrusion mount)

A mod for the Blobifier mod that replaces the tray and servo arm with a rack+pinion mechanism to allow for a shorter base. Note: I'd recommend adding some plastic-safe grease to the rack and pinion interface to reduce wear and tear in the…

Downloads
153
Likes
43
Rating
0
P
PrintablesEmpiricus

Hood cap for Leica Elmarit-M 28mm and Summicron-M 35mm Lens

Cap for Leica Elmarit-M 28mm and Summicron-M 35mm Lens Hood. The original hood cover sits very loose and is easily lost. The center part is pressed into the cover. Hold as shown and press slightly down to put the cover on. Pull off to…

Downloads
152
Likes
10
Rating
0
P
PrintablesFizzy

FT EMS Micron 180

FT EMS Micron Welcome to FizzysTech Electronics Management System designed for the Voron Micron build. This model works with the stock build as well as the G2Z mod. INSTALLATION INSTRUCTIONS EMS is designed to be extremely flexible as to…

Downloads
149
Likes
49
Rating
5
P
Printablesjyap

Voron 1515 Extrusion Serial Plate Generator - For Voron V0, Micron and Salad Fork

Voron 1515 Extrusion Serial Plate Generator Preconfigured for Voron V0, Micron and Salad Fork. Clips right into your 1515 extrusion. Parametric in OpenSCAD Clip modified from https://www.printables.com/model/130955-clip-for-1515-extrusion…

Downloads
144
Likes
39
Rating
5
P
PrintablesIbot_3D

Micron A1 Silicon Wiper

For Beacon or Carto it is highly recommended to use a silicon wiper. This is my version Use a A1 wiper pad and glue it to the printed part. Secure everything with 2x M3x8 and some t-nuts. At the moment there is no bucket for the blobs.…

Downloads
138
Likes
30
Rating
0
P
PrintablesDanielAlex

Star Wars Omicron-class Attack Shuttle

The Marauder was a modified Omicron-Class Attack Shuttle used by Clone Force 99 aka The Bad Batch. It appeared in the final season of The Clone Wars and most of The Bad Batch . (There were some changes between Clone Wars and Bad Batch .…

Downloads
137
Likes
36
Rating
0
P
PrintablesCosmonate

No Drop Nuts for Micron R1

No Drop Nuts custom fit for the Micron R1 gantry. They make it so the gantry doesn't fall apart when you move it.

Downloads
128
Likes
34
Rating
5
P
PrintablesAMSPawn06

"Micron" Nerf Pro Sender Body kit

these parts all print flat on the build plate, except for the sights which print standing up. everything screws together with standard dart zone or nerf screws, and can be glued together for extra strength (muzzle goes inside of barrel,…

Downloads
127
Likes
53
Rating
5
P
PrintablesHazel

Sakura Pigma Micron Pen Holder

A pen holder that uses the pens clips to stay in place, so you know what size you’re getting, kept the filament and size to a minimum, had enough of the flimsy packaging these fineliners came in. If you have solidworks you could change…

Downloads
123
Likes
33
Rating
3.5
P
PrintablesTache

Field Notes Memo Book and Micron Pen Clip

This is a simple clip for the Field Notes Memo Book combined with a Pigma MICRON Pens. The clip is made for the 48 page Field Notes Memo Book. The memo books and pens can be found at your local art supply store, or via Amazon: SAKURA…

Downloads
117
Likes
33
Rating
5
P
PrintablesLinus1997

43mm, 46mm and 49mm to 39mm step down/up filter lens ring for Alum Panomicron v2 Adapter

A handy ring that adapts 43mm, 46mm and 49mm threads down (or up) to 39mm, designed to fit the Alum Panomicron setup. It prints well with a 0.4mm nozzle at 0.12mm layer height, providing clean threads and a snug fit. Ideal for switching…

Downloads
116
Likes
5
Rating
0
P
PrintablesJelly

Micron 180 Bed spacing Jig 82.5 and 85 mm

In 82.5 and 85. Print two of each. They are exactly 82.5 and 85 in the cad, but your printer may not print to exact dimensions. Mine was a little off, but close enough for me. (.2 off on my particular printer) These print fast, and don't…

Downloads
116
Likes
18
Rating
5
P
Printablesregisgwada

Entonnoir avec filtre 0.125 micron pour resine Elegoo

impression en 0.2. Nécessite une reprise manuelle du passage de l'ergo de maintien du porte filtre pour s'adapter à l'épaisseur du filtre. Le tout est maintenu serré lorsque l'entonnoir est vissé sur la bouteille. Ajout d'un étalon pour…

Downloads
115
Likes
16
Rating
0

Doom cube micron by Doom cube discord

Doom Micron mods by Doom Discord community https://github.com/DarthPope0327/DooMicron Base build parts should be gotten from the printers for ants github. https://github.com/PrintersForAnts/Micron These parts are for modifications to turn…

Downloads
114
Likes
52
Rating
0
P
PrintablesAdam Storm

2020 Panel Clips - Micron Style

I love hartk's Micron clips on my v0. I wanted the same on the bigger brother Trident that lives right next to it to keep a consistent look across both printers. I took the Micron clips and mashed them up to the Annex clips. I liked the…

Downloads
112
Likes
38
Rating
5
P
PrintablesEmpiricus

Focus Tab for Leica Summicron-M 50mm

Focus tab for the Leica 50mm Summicron-M V5 and V3. Glued on with double sided foam tape that fits the recess in the part. Printed in CF-PETG for dimensional accuracy.

Downloads
107
Likes
8
Rating
5

RapidBurner X Carriage MGN9H for Micron and Pandoras Box with Cartographer mount

remixed RapidBurner X Carriage MGN9H for Micron and Pandoras Box to include a mount for Cartographer or Beacon probe

Downloads
98
Likes
12
Rating
5
P
Printablescyberal

Micron+ R1 bucket with nozzle parking and silicone brush

A mod of @KyleGB's great Micron+ Nozzle Scrubber & Purge bucket to better fit my Micron+ R1 build which includes other mods, like: Blobifier Boop Z-Umbilical The original bucket design was a bit small for my taste and i wanted the nozzle…

Downloads
97
Likes
14
Rating
5
P
Printablescyberal

Micron crap catcher and Blobifier bucket for Micron+ (R1)

You don't need to feel frustrated about having to hand-pick strands or bits of filament from the bottom deck of your Micron printer anymore! You can instead, use these buckets (originally designed by @3DeezNutz ) but now in combination…

Downloads
95
Likes
28
Rating
0
P
PrintablesKyle 🇬🇧

PFA Micron / Micron+ | MDC Magnetic Door Corners

# MDC - Magnet Door Corners Chonky door hinges & corners that are mounted with screws, and have a magnet in each corner. ## Disclaimer **The primary design of this modification requires you to drill your door panel. Drill guides have been…

Downloads
95
Likes
27
Rating
0
P
Printables3DeezNutz

µ Micron+ gantry support tool

Holds the gantry during the build or maintenance

Downloads
93
Likes
19
Rating
5
P
PrintablesIbot_3D

Micron Beacon/Carto X-Carriage

What you need: 4x M3x12 for mounting to MGN9H 2x M3x8 to connect both halfs 4x Heat Inserts 2x 2x10 self tapping screws for endstop Important! Do not overtighten the Beacon screws! or the layers will crack. Optional: You can print the 1mm…

Downloads
88
Likes
17
Rating
5
P
Printablescyberal

EBB36 Cover with Micron logo

A cover to keep the back of your EBB36 more contained, and help avoid cables catching on other things.

Downloads
87
Likes
11
Rating
5
P
PrintablesLordKillZone

Micron 3010 Bed Fans

Bed fans for Micron 3d printer. BOM: 4x M3x8mm screws 2x 3010 blower 2x Wago Version V.1.1 I had changed pins and fitment to better fit fan inside holder.

Downloads
87
Likes
19
Rating
5
P
PrintablesOdd Job 3D

Micron Plus Pcb Klicky Mount with X End Stop Location

Couldn't find what i needed so here we are…… running on a Dragon Burner Micron carriage.

Downloads
81
Likes
9
Rating
0
P
Printables3DeezNutz

µ Micron+ Crap Catcher

Micron+ Crap catcher. right side has built in supports. its made to fit the newer 5015 bed fan style on the R1 micron+ but it can work without it. you can read about what this does here…

Downloads
80
Likes
24
Rating
5
P
PrintablesMike4D

Handles for 1515 extrusion like Micron or Voron V0

These handles are designed for Misumi 1515 profiles and can move/slide on the profiles. Designed for Micron with panel clips to have extra space for fingers between the handle and the clip. You also need 4 heat-set insert and 4 M3x8mm…

Downloads
80
Likes
13
Rating
0
P
PrintablesJessi

FT EMS Micron+

The original model does not really have a tolerance. It still fits but the bases are bowing/bending. I removed 0.5mm to each side, which has the same dimensions as that of R1 deck panel. I also moved the clip that is blocking the cable…

Downloads
80
Likes
19
Rating
5
P
PrintablesBenditandsendit

Dragon Burner Klicky Probe Mount - Micron MGN9H Linear Bearing

TruWrecks has updated this model so that you no longer have to cut the belts while having better clamping power! You can find his model here: https://www.printables.com/model/941302-dragon-burner-mgn9h-klicky-v2 Thanks for helping improve…

Downloads
79
Likes
15
Rating
0
P
PrintablesAshers_Workshop

CNC CAM for Voron Micron+ Motor Mounts - Autodesk Fusion

My highschool has a Haas Mini Mill2 and I wanted metal motor mounts for my voron because the motors get quite hot and I didn't like the idea of having plastic motor mounts so I made this. Took me quite a while to CAM in Autodesk Fusion,…

Downloads
79
Likes
30
Rating
0
P
PrintablesTD1 3D

1515 Extrusion Corner Pop in clips for hiding LED + Chamber Holder Wiring Micron+

Print out of ABS or PLA, your choice 80% infil 4 walls 5 bottom 5 top.

Downloads
78
Likes
15
Rating
0
P
Printablescyberal

Micron+ Stealth Handles (top and bottom)

Designed to accommodate 1515 extrusions with 3mm panels with 3mm foam tape (as designed for the Micron+ R1. Print following Voron settings but recommended a higher infill percentage (say 70%+) and printing at 45º (as shown in the picture)…

Downloads
73
Likes
17
Rating
5
P
PrintablesQuidproQuo

1 Micron Filter Bag Pool Jet Adapter

Grew tired of wasting lots of water filtering to waste on my pool. This adapter fits onto a 1 micron filter bag (amazon). It screws right into the pool's return jet eyeball threads. I used 0.125" countersunk screws to screw it into the…

Downloads
73
Likes
12
Rating
0
P
Printablesstaticanime

1515 Serial Plates for Micron+

Just finished building a Micron+ and got my serials, and wanted to display them nicely on the printer. There's exactly 52.5mm between the Z covers and the Bed Extrusions, so figured that was the perfect place to mount. Remixed to make the…

Downloads
73
Likes
12
Rating
5
P
PrintablesYetiFab

No Drop Nuts for Micron R1 with Misumi 1515 Extrusion

I printed Cosmonate's NoDropNuts for Micron R1 for my Micron and found them to be too tall for my Misumi extrusion. I used SkyKing83's Misumi 1515 No Drop Nut model as a size reference because I'd previously printed them for my bed…

Downloads
72
Likes
18
Rating
0
P
Printableszer02pi

Micron Backpack

This is backpack to mount PSU for Voron Micron. In my setup, all electronic parts did not feet underneath of the Micron. So, I decided to mount PSU on the back of the Micron. This model is designed for 120^3 build volume Voron Micron…

Downloads
71
Likes
15
Rating
5
P
PrintablesJinRoh

micron+ 180 unchained

BOM: 2X Sourcing map Lock Nut PG7 Type: PG7 Single Hole Cable Range: 3mm to 6.5mm / 0.12" to 0.26" Thread Diameter Cable Sleeve of your choice UPDATE: unchained up V2.stl ( thicker Wall ) -------------- 22.05.26

Downloads
70
Likes
26
Rating
3.5

Micron r1 Daylight on a Matchstick mount remix

made a slight adjustment so the matchstick doesnt hit the z tensioners

Downloads
69
Likes
7
Rating
0
P
PrintablesEddieSha

Micron+ 1515 USB Cam Mount (OV5640)

1515 Extrusion Mount for OV5640 5MP USB Cam Designed around the Micron+ (180x180x180) and to be mounted on the top rear extrusion to view the whole bed.…

Downloads
69
Likes
11
Rating
5
P
Printablesmirabatek

Sakura Pigma Micron Pen Case (Vase Mode)

Sakura Pigma pens can be bought individually, with different tip sizes and colors to suit your needs. I needed a case to keep these pens organized, so I designed a simple and lightweight case available in three sizes: for 4, 6, and 8…

Downloads
68
Likes
9
Rating
5
P
PrintablesMarcusInCo

Voron Micron Quick Connect Fitting Bowden Tube Mount

I like having the little quick connect fitting to secure the PTFE tube to the back so it doesnt get pulled through. Just added some threads to the existing model.

Downloads
68
Likes
12
Rating
0
P
PrintablesGregory Jones

Salad Fork / Micron Top Spool Mount

I remixed the original model since I couldn't find a simple top mounted spool holder for my Salad Fork, so I uploaded this for 1515 extrusion based printers like the Micron, Salad Fork, V0, or any other printer of that type. Keep in mind…

Downloads
66
Likes
15
Rating
3
P
PrintablesZen3Dlab

Voron Micron Daylight pcb mount

Daylight pcb: https://shop.zen3d.eu/daylight-on-a-matchstick build log: forum.zen3d.hu/d/59-m095-micron-g2z

Downloads
65
Likes
15
Rating
0
P
Printablesastrobunny

Better jigs for Micron 180mm

Y tool had the wrong size for Micron 180mm but it was such a good tool compared to the other jigs because you just pushed it up against the extrusion to get the right length. I decided to duplicate it for the X and Z extrusion alignment,…

Downloads
64
Likes
18
Rating
5
P
PrintablesThor

F2000 Micron-Grip Handguard with RIS/M-Lok

A relatively simple Micron style handguard with a rail piece in the front and M-lok on the sides. Three versions. Measure your hand width. Short: 53mm Medium: 63mm Long: 73mm medium is the OG design, the other's are slightly different,…

Downloads
63
Likes
12
Rating
0
P
PrintablesKyle 🇬🇧

Micron R1 - NEMA17 A/B Motor Mounts

NEMA17 A/B Motor mounts for Micron R1 🔧 Overview New A/B motor mounts for your Micron, that are designed to use NEMA17 motors, with accompanying dual sheer bearing holders. Full bed travel is retained, however you might need to readjust…

Downloads
62
Likes
18
Rating
0
P
PrintablesStavji

Voron Micron vertical PSU mout

With this mount you can fit BTT Manta M8P or M4P without issue. Print it without supports with Voron PIF settings. Required materiel 4x M3 Heat inserts 4x M3x12 Hex flat head screws 4x M3x8 Hex flat head screws 2x DIN rail mount…

Downloads
62
Likes
12
Rating
4
P
PrintablesPhil

Micron Dragonburner Beacon Probe mount

Had a Dragonburner laying around I wanted to mount on a Micron 180 with a Cartographer probe. Did not want to print Anthead since I do not want to open/break fans. Dragonburner “alternative mounts” did not seem to have a Cartographer…

Downloads
61
Likes
7
Rating
5
P
PrintablesTD1 3D

Voron Micron+ 120/180 Z Covers - Low Profile - Designed for Moons Motors

Hello, i had issues with the moons motors hitting the top of the Z covers with my formbot kit. These covers will allow extra room when printing your first layer. Print using your own settings, i did 0.16 on the bambu with 30% infill. I…

Downloads
59
Likes
12
Rating
0
P
PrintablesPiotr

DIN rails 6, 7 and 8 mm thick mounts for Micron, Salad Fork and other Printers For Ants using 1515 extrusions

Modified Micron's DIN rails mount into 6, 7 and 8mm variants. Helps accommodate rails that has been cut a bit shorter than desired, especially for those that cut them with hand saw. Meant for Micron, might work for Salad Fork and other…

Downloads
58
Likes
4
Rating
0
P
PrintablesDavidGray

BTT TFT43 Mount for Micron 180

To be used in conjunction with https://www.printables.com/model/776889 Note DSI Displays are not currently supported by BTT CB1. A Raspberry Pi is required.

Downloads
57
Likes
17
Rating
0
P
PrintablesBlindBadger

BigTreeTech HDMI5 Mount for Micron R1 Skirts

This mount I modeled after the R1 Skirts for other displays, but made a mount to fit the HDMI5 based on specs and feedback. Much thanks to mattd on the doom discord for testing this while my screen was stuck in shipping!

Downloads
56
Likes
12
Rating
5
P
PrintablesTHE YOOPER

Micron pen holder

A holder with size lables for SAKURA Pigma Micron Fineliner Pens. I made it specifically for this set -…

Downloads
55
Likes
14
Rating
0
P
Printablesjbtraul

Micron (1515) BTT Pi TFT43 mount

A mount for BTT PiTFT43 v2.1 on Micron. Will likely work for other 1515 machines. Display mounts to displaymount with 2.5mmx12mm screws. Displaycover slips over display and snaps into place. Slot in cover provides clearance for cable.…

Downloads
55
Likes
7
Rating
0
P
PrintablesHyperPrints

Micron Rear Bowden Entry

Rear panel insert for bowden tube connectors. I use 1 on each side printed with 4 walls, 4 top and bottom, 20% infill. The walls are important to get good threads. Hex on the inside where they should be.

Downloads
53
Likes
6
Rating
0
P
Printables3DeezNutz

µ Micron+ Formbot Bakelite spacer holder

bed spacer holder for Formbot kits that uses the bakelite bed spacers. This is designed for 1515 extrusion please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other…

Downloads
52
Likes
9
Rating
0
P
Printableshartk1213

Micron 3d printer

Micron is a compact, CoreXY 3D printer inspired by the Voron 2.4, redesigned from the ground up using 1515 aluminum extrusions and Nema14 steppers. This open-source printer supports 120×120mm and 180×180mm build volumes, offering reliable…

Downloads
52
Likes
63
Rating
5
P
PrintablesHyperPrints

Micron 2 color Z-Belt covers

2/4/24: Added low profile version. About 2mm shorter and sunk BHCS down 1.5mm. To make for easier multicolor printing across all slicers. Really sets off the build!

Downloads
49
Likes
9
Rating
5
P
PrintablesJinRoh

Magnetic TopHat for micron+

Botton part has a support structure in the STL. Should be removed, cleaned and covered with FoamTap. The rest should be clearly visible. The number of magnets and screws is optional. It depends on the holding strength you want. BoM: 16x…

Downloads
48
Likes
19
Rating
0
P
PrintablesThomllama

X Belt Tension System for Max Micron (and some other Prusa i3)

Currently very much a work in progress!! August 3rd, 2016 - added an edited adjuster to accept 20 tooth idler bearings This is a Z axis carriage for a Max Micron and other Prusa i3 printers that have the lead screw and rod off set, not in…

Downloads
48
Likes
3
Rating
0
P
PrintablesDavidGray

Micron 180 Skirt For BTT TFT43

to be used in conjunction with https://www.printables.com/model/773017

Downloads
47
Likes
9
Rating
0
P
PrintablesTD1 3D

Micron+ Front Camera Mount OV5648

Micron+ Front Camera Mount OV5648 3x M2 4mm - Scews Required

Downloads
46
Likes
8
Rating
0
P
PrintablesBenditandsendit

Voron Micron Nozzle Brush and Purge Bucket - Front Mounted - v2 Available!

v2 Now uploaded! using 4x 6x3mm magnets and a 3mm brass insert, you'll have an easier time removing the little purge bucket for cleaning as well as using the brass insert to clamp the brush into place :) I've also included “longer”…

Downloads
46
Likes
15
Rating
0
P
PrintablesApenzoon

Micron+ R1 180 one piece center fan skirt accent

This is a one piece side skirt for a micron+ r1 180. It connects all seperate parts and gives more stability to the skirt. Print using regular voron PIF settings.

Downloads
45
Likes
10
Rating
0
P
PrintablesPushingPixels

Micron 180 Colony Clacker Skirts for R1 Z drives

Thicc skirts for the Micron 180 with a proper Colony Clacker door.

Downloads
45
Likes
17
Rating
0
P
Printablesalv

Micron(Or any 1515 + front rail mgn9 printer) belt clamp

Basically shrinked version of DoubleT clamps For assemby 4 Voron spec heat inserts and 4 M3x12 screws needed Will add step files later

Downloads
45
Likes
5
Rating
0
P
Printablesschwwaa

Pigma Micron 6 pen holder

This is a pen holder for pigma micron pens. the bottom space is for weights if desired. I used two Ezisoe 1 oz stick on wheel weights that are 7.9mm thick, 34.3 mm long and 20.9 mm wide. The model is 140mm in length and 40mm high. The…

Downloads
45
Likes
7
Rating
5
P
Printables3DeezNutz

1515 µ Micron+ wago and jst bed quick connect

Quick connect for your micron bed for 1515 extrusions. 2 pin jst connectors x2 2 pin wagos x3 please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…

Downloads
44
Likes
14
Rating
0
P
PrintablesHyperPrints

Micron+ ZeroPanel full length

Add-on to this great PFA mod! When you don't have a black frame, the foam tape stands out like crazy. Use the corners from Github. These sides will fit a Micron+. Step files included so you can modify the length to suit your build. Print…

Downloads
44
Likes
10
Rating
0
P
PrintablesMooFishy

Micron R1 120 front skirt - Knomi v2

Front skirt for Micron R1 120 able to fit a knomi v2 screen Configure Knomi before insertion for access to usb, then slide usb side in bottom first and then press in top to secure. Supports required for the front ledge Single color swap…

Downloads
43
Likes
2
Rating
0
P
Printables3DeezNutz

V0 µ Micron+ 1515 JST splitter box for LED lights

Voron micron+ JST junction box for LED lights. Fits snuggly in the extrusion. please leave ⭐ review and rate. Check out my other designs. https://cults3d.com/en/users/3DeezNutZ/3d-models https://www.printables.com/@3DeezNutz_752861/models

Downloads
41
Likes
7
Rating
0

Micron Rear Cover with PUG and PTFE passthrough

Compatible with the excellent Parametric Umbilical Gland (PUG): https://www.printables.com/model/378567-pug-parametric-umbilical-gland Modeled after a similar rear cover I designed for the Voron Trident, this rear cover is for the Micron…

Downloads
41
Likes
13
Rating
0
P
PrintablesErik Kallen

BTT SFS V2.0 Holder for Voron Micron

I adapted a panel clip of my Voron Micron to allow attaching a filament sensor to

Downloads
41
Likes
2
Rating
0
P
PrintablesRene

Micronova Controller Case

edit 08.11.2024: Added a case version compatible with both old and new PCB versions. The old version, which is only compatible with the old PCB version, was moved to the folder named 'old.' added 3mf for multicolor printing. deprecated:…

Downloads
39
Likes
1
Rating
0
P
PrintablesIShootFoam

Micron+ R1 XY joints for CNCed lightweight gantry

This is a “fixed” version of the Micron+ R1 XY joints that is compatible with the lightweight CNCed gantry options often found on Aliexpress. These CNCed gantries were designed for the original R0 XY joints, so because the new XY joints…

Downloads
37
Likes
4
Rating
0
P
PrintablesUzerk

Micron R1 Beta Umbilical Mount PG9/3 hole

I needed a good way to secure the wires coming from the umbilical in to the chain. The model is printed with standard Voron settings: ABS/ASA 0.2mm Layer height 0.4mm Extrusion width 4 Walls 5 Bottom/Top 40% Infill Place the model with…

Downloads
37
Likes
3
Rating
0
P
PrintablesWill

M2 nut bar for 3D Printers for Ants Micron + (Mini Voron 2.4 ) (Printable version also available)

Need 6x nut bar for micron +. 2mm thick if leaser cut. Also, a printable version needs 15 x m2 nuts for each bar.

Downloads
37
Likes
4
Rating
0

Micron 120 Backpack R1 beta remix

This is a backpack to mount PSU and power inlet for Voron Micron 120.

Downloads
37
Likes
5
Rating
0
P
PrintablesJinRoh

Gantry Mounted Nozzle Park/Brush for micron +

Quick and Dirty Remix for the micron

Downloads
36
Likes
13
Rating
0
Downloads
36
Likes
5
Rating
0
P
PrintablesKyle 🇬🇧

Micron Really Useful Tool

Just a really useful tool. For when you're building your Micron R1, it helps locate the MGN7 rails and the motor pulleys. The most up to date version can always be found on my github: https://github.com/Jadecky/Printer_Mods/tree/main

Downloads
36
Likes
11
Rating
0
P
PrintablesSije veenstra

Micron MGN9C X Carriage

I had the wrong linear rail in my kit for the micron 180. instead of a MGN9H rail, i had the shorter version (MGN9C). so the stock carriage didn't fit my rail. i modified it so it fits the MGN9C rail.

Downloads
36
Likes
8
Rating
0
P
Printablescyberal

Colony Clacker corner covers from Micron

Created this mod to keep my Micron style all in sync instead of exposing bare blind joints or using other covers that don't follow the Micron aesthetics.

Downloads
36
Likes
9
Rating
0