Laminate Flooring Wall Spacer 8mm / 5mm
Laminate Flooring Wall Spacer 8mm / 5mm
Print approx. €10.25–€12.53 excl. taxPreliminary estimate for one variant
- Downloads
- 936
- Likes
- 76
- Rating
- 4.83
Counting matching models…
Laminate Flooring Wall Spacer 8mm / 5mm
Print approx. €10.25–€12.53 excl. taxPreliminary estimate for one variant
The Herrnhuter Stern (Moravian Star) is a famous german advent decoration symbolising the Star of Bethlehem. It is typically made of paper and its shape is based on a rhombicuboctahedron. This model uses the polypanels joints from…
Print approx. €8.96–€10.95 excl. taxPreliminary estimate for one variant
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 18mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 18mm, proporcionando una…
Print approx. €8.76–€10.70 excl. taxPreliminary estimate for one variant
Created this simple to print and use ESC Mount for the Rlaarlo Omni Terminator Mini 1/10 truck. Allows use of both double sided tape and zip ties - mounting to a rigid structure that uses stock screws.
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
Terminal cap for 9 volt batteries. Marked with “9V”, quick print. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: No
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
BL-5 battery replacement to allow direct powering from a 7-8.4VDC power supply. I terminate mine in JST-XH and connect it to a bench supply. The print can be made without supports, except under the retaining clip at the very top. I use…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 16mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 16mm, proporcionando una…
Print approx. €5.45–€6.66 excl. taxPreliminary estimate for one variant
IMPORTANT NOTE: If your battery's terminal(s) / terminal wire(s) get hot you need to ensure the printing material you use for this design will suffice. The included GCODE files assume the use of PTEG. This battery terminal cover is a two…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 15mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 15mm, proporcionando una…
Print approx. €5.43–€6.64 excl. taxPreliminary estimate for one variant
Recently I was in need to mark my WAGO terminal blocks, but I didn't want to buy WAGO's markers because it requires a special printer and can be bought only as a quite large coil. This is not the exact copy of WAGO's WMB marking as the…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
In addition to this print, you'll need to eat a couple of boxes of Ferrero Roche. Print supports are required for the Tray! For the Pot Inserts, I printed mine in Spiral/Vase mode using a 0.4mm nozzle with the extrusion width set to 1.0mm…
Print approx. €1.04–€1.28 excl. taxPreliminary estimate for one variant
Need a way to pay at the Our Generation Cafe? Use this terminal from Square! This Square credit card terminal is for American Girl / Our Generation dolls because it's at 1:3 scale but you can modify the scale. This terminal has a hole to…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
A basic case for Arduino Mega + BTE16-06 screw terminal blocks.
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for PETGSource material: PET
OpenScad Script for Customizable LED Box to illuminate Signs or lithophane Pictures with easy Parameters and 3 Parts. Base (or Back) with optional Holes for mounting, Front to keep the Picture in place and a insert to hold the LEDs in…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
Printed in three parts that need to be glued together. Optionally, you can insert two 3x30mm steel dowel pins to increase the strength of the glued part. Material 10mm wide 12V LED strip 4pin XLR male connector 80cm cable 2x 3x30mm steel…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
I was missing something that could hold my laminated photos and this was my solution
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
Having to work with different CAN dongles and devices with a CAN interface it is quite common, that I needed to connect many of them to the same CAN bus. Many of those have Sub-D as a interface. But often they are not the right sex (you…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Single cell holder with included files for 21700 to 18650 cell bushing adapter. Just use a dedicated charger with jumper wires or a power supply with correct settings. 1 - 1/2" #6 machine screw hex head 1 - 1 ¼" #6 tapered machine screw 2…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Introducing the Game Changer in Winter Car Maintenance! Say Goodbye to Manual Scraping with our Electric Ice Scraper. Are you tired of waking up early to battle the frosty windshields? Have you struggled with traditional ice scrapers that…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
This is designed to allow LiTime 50Ah batteries to stack on top of each other as well as protect the terminal. It's a bit overkill if you are only trying to protect the terminals, my TPU Battery Cable Boots would be better for that. If…
Print approx. €6.87–€8.40 excl. taxPreliminary estimate for one variant
This is a gift and storrage box for my Illuminated Christmas Star . Its fits on the printbed of an MK3. All the parts fit neatly inside this box and have their dedicated place. I also created a build guide for the star. If you are looking…
Print approx. €5.39–€6.59 excl. taxPreliminary estimate for one variant
I wanted a simple, semi weatherproof camera housing for an RPI/MotionEye camera.this one uses a minimum of fasteners. I made a bulkhead USB to microUSB cable for power, but a a microUSB connector (to mate up with the RPI) will fit easily…
Print approx. €5.69–€6.96 excl. taxPreliminary estimate for PETGSource material: PET
About Mean Well RD-50A terminal cover done from scratch. On the photos there is a version without an additional mount hole to the right because I do not use it, also quick ugly print, but usable. Please give a like and post makes and…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
This is my design for a stackable letter tower that can (and should) be illuminated from the inside. It is a two-color print, with one color forming the shell (or frame) and the second—preferably transparent—creating the fill. The set…
Print approx. €29.99–€36.65 excl. taxPreliminary estimate for one variant
This model is a fully adjustable counter mount designed for payment terminals and similar devices. It features a 310° base rotation and uses a friction tilt hinge, allowing you to tilt your device at any angle - just tighten or loosen a…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for PETGSource material: PET
This ship appeared in the epilogue of The Owl House. This model has two pairs of articulated print-in-place wings. Dimensions Length Width Height 82mm 59mm 79mm Print Instructions Printed at 0.1mm layer height. Requires supports. The…
Print approx. €5.24–€6.41 excl. taxPreliminary estimate for one variant
Version 4 - bigger cable channel (5mm) + lid to close the PCB with voltage stabiliser. A dummy C-size cell that lets a 3.6 V battery-powered device run off an external supply instead of eating a primary lithium cell. The body copies the…
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
This is a custom take on Dummy 13 with a Terminator-style twist. I really think Dummy 13 is perfect to make robots, so here's the most post-apocalyptic, gritty, scary robot out there. Have fun with it ! I used some modified parts of…
Update: A refined Version 2 of this moon wall lamp is now available. It keeps the same core idea, but improves details, assembly, and overall finish based on feedback from this original release. This Version 1 remains fully usable. If…
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
I wanted a good DIN Mount for my Shelly Switches to mount them properly into my electrical box, but all that i found did not really satisfy me. So i made my own inspired by severel other designs with these key features: vertical…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
No Supports … Just Print … How about buy me a coffee buymeacoffee.com/spank7
Re-mix of the same concept from David - but with Clip-on mounting and it prints easier / lower warpage. Clip-on mounting Shroud Easy on / off without removing screws No supports needed Smooth bottom No airflow restriction only 3.6g /…
Photogrammetry made out of 46 Photos from my own model of Minas Tirith the legendary city out of the Tolkien Universe as shown in the Movies The Lord of the Rings. 1st Try of making a 3D-Model with the photogrammetry program - so it's far…
A Zbrush sculpt from the first Terminator movie. I provide the parts at the size i printed them, but if you want to save some printing time, please feel free to scale them down a little. To get the best out of these i would split the base…
Remixed version of the Terminator skull
First of all. Thank you nracmo ( https://www.thingiverse.com/nracmo/about ) for the design! I have cleaned up a couple of parts, redesigned some of them to fit my need and raised the resolution. Further more i have designed a stand for…
Keep the bone clean. When you eat this superfood, be careful not to cut it. Wash it to remove any meat remains that may be attached to it. Identify its parts. Although the bone appears spherical, it is key to know which is the upper part,…
A remix of an amazing design bij Martin Kozak. Moon surface model is based on the real lunar 3D data. I wanted the moon to be larger and more decorative. The moon is now split into four parts and has a diameter of almost half a meter.…
T800 taken from many components here on thingyvers. I decided to whip up a T800 bust for a mates birthday. Then I got carried away and designed these make shift shoulders, then I couldnt help myself again and added some hands and so on.…
Display housing for SSD1306/SSH1106 1.3" OLED display and Wemos D1 Mini. There are many use cases like Octoprint Display, Tasmota or ESP Easy to name just a few - you may need to follow the respective guides and instructions online. I use…
The WAGO terminals should have a tight fit and held in place by the mount. I put some text on the outside for the most common use cases in small electronic projects. In case you want to do this on your own, I uploaded a model without text…
Original Part : https://www.thingiverse.com/thing:4894625/files
This model is the section “Wing” in the stage “ruin A”. Also included is a small set of window covers and reliefs. It was constructed for a Kickstarter called Domina Ferrum: https://www.myminifactory.com/users/terrain4print?show=store…
Battery terminal for Makita battery 18V. Designed to fit the battery mount by GPlatek https://www.thingiverse.com/thing:352094 Redesigned / Remixed from https://www.thingiverse.com/thing:863257 so that it is much easier to create the…
This was first inspired by @ ktothestank who made a simple wire straightener. I printed and tried it since I'm doing a lot of ethernet terminations, and decided to start from scratch and iterate 5 times on something that would have more…
Find an improved version (2026) here: Minas Tirith Lamp - completely wireless! Original description: By the time I created this, I found that there was no easily printable model of Minas Tirith. Some had empty layers, some were just an…
Can be used to start growing basil and chili and other plants which need a lot of water at the start. When reloading a bottle make sure you are quick - it will be sealed quickly (a solution will be added soon - check out Update 1) Print…
Destiny Ghost companion for all the guardians out there! This model main body joins with a bayonet connection, and the magnets where placed inside the main body to hide them if you want to show it without the wings. The led switch is…
Update: v1.1, July 27, 2021. Model slightly uppdated to suit other of my output connectors. Sliced with 0,15mm layer height. A pdf file added: Parkside battery system.pdf, (placed under Download package). This is one of my first printed…
Read: How I Designed a 3D-Printed Laminar Flow Nozzle (2026-08-21) Versions mk1 - 2020-08-31 mk2 - 2025-06-04 mk3 - 2025-06-06 Intro Like so many late-night YouTube voyagers, I was hypnotized by those crystal-clear “glass rods” of water…
This is my design of the T-800 CPU as seen on the Terminator 2 (extended edition) movie, specifically the scene where they decide to re-programme the T-800. If you like this design, please give it a like and follow my Instagram page to…
A remix of a mounting arm I found in the Voron Discord. Unfortunately I don't know who created this. I made this one from scratch and also added the step. You need 2xM3x12, 2x extrusion nuts and 2 heat inserts. You can find some example…
This is an attachment for a garden hose that creates a laminar flow in the water. Laminar flow is a concept in fluid dynamics that describes a flow that is uniform and parallel. Print instructions Unassociated tags: fluid dynamics…
Under body protection for the Omni Terminator from Rlaarlo. You can re-use the stock bolts. You have 2 options. The full ski protection or the just the sides plates (L and R). Recommended ABS/ASA, but works just fine in PLA. If you use…
I changed the Original Parts to fix some “issues” and create a new housing for my Octoprint Monitor ;) Changes: -rounded the houding edges for a smoother look -create a bezel for a 0.96" OLED -make the bezel rotatable for “Tate Mode”…
Printed with tree supports in PETG.. prints clean. Thanks again to Doug for his work. Made this remix a breeze.
Designed a new enclosure. Main goals were: minimal as possible use the FlashForge kit as much as possible leave the screen mounted where it is all panels and door easily removable without tools design files are available for easy remixes…
I wanted to challenge myself with this CAD design and see if I could make a roll cage for my RC. The roll cage needs to be printed with some impact resistant material. I happily share this model for free, but it took me quite some time to…
Terminator Arnold Head for Dummy13/Lucky 13
Domina Ferrum is a gothic sci-fi building and ruin. When intact, it gives an elegant and powerful impression. When bombed out, it still provides good cover from incoming fire. https://www.myminifactory.com/users/terrain4print?show=store…
All designed parts of the peristaltic pump are printed out of PETG. For the hose I have choosen silicon to avoid high forces by rotating the impeller. The hexagon shaft where the impeller is put-on have two interfaces, on one side an…
This project is designed to germinate Chia seeds, although other small seeds can also be used. The seeds must first be activated by placing them in a container with water that barely covers them for several minutes. A gelatinous substance…
A remix of the Minas Tirith book-ends that came with the special edition of the movies. I used Tinkercad to turn it into a dice tower! If you print it please post a make and provide any suggestions for improvement. Updated to fix the…
This is a custom battery terminal for fablab.ee's Makita 18V battery adapter. This is designed to be used with 6,3mm blade connectors (red, blue). Just crimp on the cable and push it through the hole in the terminal. My print is a…
Model originally published by Maxoume on Thingiverse. No changes have been made.
¡La soberana absoluta del abismo – Succubus Reina Infernal! Diseño 100% original: succubus poderosa con piel roja escarlata, grandes cuernos curvados negros, alas de murciélago extendidas, cola espinosa y cabello largo negro ondulado.…
Lord of the Rings Bookend with a Model from Gondors capital city Minas Tirith. Photogrammetry made from the movies.
Before you begin This is intended for electric candles/lights (tea candles, small Christmas lights etc.), if you want to use this for real candles, please, mase some holes and print with a height temperature material. What a tea candle…
ENGLISH description: Terminator t-800 Arnold Schwarzenegger figure model. Ready for painting and scaled up to maximum height for my Prusa MK3. (ca 20cm tall) Printing instructions: ■ Steel sheet ➔ at your own preference (textured PEI for…
I really like the design of the magnetic PFTE couplers and I wanted to use it for a drybox. However I don't have MMU, only one tube is used at a time. So I designed a terminator to dock the tubes when not in use. To be used with M4 screws…
In the summer of 2022, I did a Kickstarter called Domina Ferrum. This is a free sample from the last stretch goal. It is a smaller separate building. Plenty of space for you to climb on top of. Full set The full set includes lots of…
The idea with this mod is to rotate the bed 90°, so that the bed wires come out the front right side instead of the back. That way, they can travel over the case rather than behind it, allowing the printer to be pushed back closer to a…
The “flame” is hollow with thin walls, so the center LED can shine through. Print with transparent material for an even better effect. Print settings Supports touching buildplate (only needed for the base) Use support blocker to avoid…
Star Trek - The Next Generation Desktop Computer Terminal In an effort to create a small Raspberry PI based desktop computer for things like time logging, I got inspired by the iconic design of the computer props in many Next Generation…
The fictional T-800 memorial coin I designed for #3Dprinting (mostly resin) Can be printed on FDM too, but for the best results resin printer recommended.
Print with 30% infill, 0.1 layer height, 4 walls and 8 top layers. Sand mating surfaces of the middle part with 80 and then 200 grit. The top and bottom parts should print smooth enough to make sanding unnecessary. They should be able to…
Eye with dilating pupil powered by a 2g micro servo: https://www.aliexpress.com/item/1005002973104855.html Will update with additional mounting for use in OneIdMonSTR's anmatronic skull project. It's still a work in progress and fiddly to…
Playing darts gains more and more popularity, especially around the time of world championship games in December/January. Playing and practicing for a few years now, I wondered how to optimize the conditions. The illumination was one of…
UPDATE: New and improved design! A bracket that allows to keep the original faceplate in place with no DVD rom installed. Requires supports.
Designed this for the large 2x 48v 280ah banks. Clips on decisively to the standard busbar with inside barrels that align with the standard nuts. Small cut outs in the terminal cover for the BMS sense and balance leads.
Este diseño es un porta fusible tipo automotriz, ideal para aplicaciones eléctricas que requieren conexiones seguras y duraderas. Diseñado específicamente para terminales aisladas y cables calibre 14-10 AWG, este modelo destaca por: •…
IF YOU ARE CONFUSED BY ALL MODELS READ THE END OF THE DESCRIPTION FOR ALL COMBINATIONS FOR PRINTING !!! Some other models in Naruto Collection : Kunai Shuriken Flying Raijin Kunai Dimensions (total): Length : 30.00 cm Width : 9.80 cm…
This 3D printable Makita LXT 18V Battery Terminal is a remixed version of two existing designs, featuring several enhancements for improved usability and compatibility: 3-pin compatibility: Expanded to accommodate 3-pin configurations,…
This is an enlarged version of this model with LED eyes. Here are the settings I used to print this model : Printer: Bambu Lab X1 Carbon Cool plate Sunlu Black PLA HATCHBOX PLA Transparent Red 0.20mm Standard@BBL X1C Generic PLA Quality…
This is a press fit cover for a battery m8 hex screw terminal. I designed it to replace the small included covers on my RV battery that didn't adequately cover the wire lugs. I printed in PETG to protect from heat, and printed in both red…
🇲🇦 مرحبا بك في المغرب Welcome to Morocco! Bienvenue a Maroc! This model was designed by Dany Sánchez . The Minaret of the Koutoubia Mosque is the landmark of the Moroccan city of Marrakech. The Koutoubia (or Kutubiyya ) Mosque is the…
This is a model for a replacement part for the Festool Domino floating tenon tool that has presets that are more compatible with the common plywood thicknesses. The ½", 5/8" and ¾" nominal plywood thicknesses are actually typically…
The Freecad file is included if you need to make any changes. Printed in PLA. 0.2mm layers, 3 walls, 15% cubic infill. I uses a dozen installing a 12 ft x 15 ft floor.
Winter, and Christmas in particular, is a time for coziness and tranquility, and nothing achieves this better than lights and lighting. With this atmospheric and festively decorated fireplace on the shelf or windowsill, the Christmas…
Since the Shelly EM has slightly different dimensions, I created this remix.
He comes around every April to eat up the bad little kids. Leave eggs and chocolates out to fill his need for flesh. Recommend blocking supports inside the mouth, attached 3mf has custom painted supports. Tree Supports on build plate only…
Clip on Camera Hood for the Q2 to reduce flare and blooming from LED lights. One is for front (stock) and 200mm LED light bar (see my other models) and another that blocks entire top (for people with risers with light strips). Suggest…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 I needed to display some information at a point of sale quickly, and only really had A4 paper and a laminator available, so I designed a rough stand and used it for the display and then came back to refine it a little. This…
The T800 ring ! Res 0.2 Print it as provided, with supports enabled (not much generated) for solidity and details. Pictures provided was made in 0.1 layers, Iam about to test a 0.05 with 0.2 nozzle. Ring size is 68mm in circumference,…
I wanted to design a classical / modern style electric violin. Something that pays homage to the curves of a Stradivarius while showcasing what you can do with crystal PLA on a 3D printer. I hope you like it. Due to popular demand, my…