143 models
The original nozzle wiper compatible with the purge bin was too small for the A1 silicone brushes I purchased. The wiper, which I remixed here, fits the silicone brushes, but is a bit too long for the space/cutout of the purge bin . So I…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Edited model of Samsung Fold5 Desk Stand.
Print approx. €6.94–€8.49 excl. taxPreliminary estimate for one variant
These are all the parts I created to mod the Prusa Lack enclosure V2 to fit the ender 3. Most of the parts can be found in the Prusa build here: https://www.prusaprinters.org/prints/3673-prusa-enclosure-v2-mmu2s Wood screws:…
Liked the drawer unit but thought the hexagon pattern adds some flavour to it and saves a tonne of filament.(50% off shell,25% off drawers). I added a slight angle to feet so it stops harassing me for supports. I printed it flat on its…
Made some changes to the nubs on the side of the latch so it does not have any sharp edges, when I printed mine, the first time I used it broke the sides of the box. Reduced the size of the nubs by .15 mm as well. Printed on lime green…
As requested, a remixed design to allow a better fit with free floating tubes AND scaled up by 110% to allow Magpul M-Lok hardware to fit. Slightly more difficult to print though, but not impossible with the right slicer settings. I ended…
A remix of the wonderful Chevy Chase Advent House by mcmaven (2023 version) I changed only a few parts, you need still the original parts by mcmaven For the walls: you can just print them faced down and add a filament change, no…
This is a reinforced version of the great Accessory holder by albrnick. I tried 2 times to print and use the original version, but accessories cause a breaking on the support between the two holders after a couple of weeks. So I edited…
K1 Max top mounted filament spool holder modded to use vented raiser from NorcoT https://www.printables.com/model/623798
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
I had a cardboard spool of this filament lying around and couldn't find one that fit https://www.amazon.com.au/gp/product/B0B5GQFGJ8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 So I downloaded JamKo76's awesome design but after…
Changes from the original model by 3d_bubbles on Thingiverse: This 3-rail Picatinny mount for the Bug-A-Salt 3.0 was almost perfect as-is, but I wanted to ensure things stayed in place with an additional angled extrusion if there's…
Not much modded really just made the sides 202mm x 3mm inside, added a bit of chamfer around the outside. PLA-CF, 0.2mm, no support.
Printed using PETG with 100% infill and 0.20mm layer height. Anx256 created a great model for replacing the back of the AOOSTAR WTR Pro to allow for the use of a 140mm fan instead of the stock 120mm fan. This remix adds a 140mm version of…
The mini control horn is used on many of the smaller Flite Test designs. I took the original design and made the slight modification of beveling the part that is inserted into the foam so it is a little easier to push in. I also added a…
it is a nice model for you to have and looks very good.
I was sick and tired of the massive VFAs of the original LDO nema14 motors so I did the “Voron V0.2 Nema 17 mount” mod, but now the tophat and backplate did not fit anymore. So….. I modeled all neccesary parts to not only make the tophat…
(SF bolt checked: works with the SF bolt ) do you like the FGC-9 MKII stingray butt-stock? and would like to use this on a non stingray FGC-9 MKII model? then I have here a remodelled version to the buffer tube. this download only…
I've added the improved pulley body module and combined it with my own pulley body mod. This is only for use if you're using the DIY MMU2+1S mods. Print instructions No supports needed. Print using PetG for longer lasting and use 25% to…
This box is a remix from nickelbeee's DJI mini2 Travel box. Thanks Nickelbeee for the great design! I use a phone case when I hook up to the mini2 controller, so I have a few part printed to help with holding a thicker phone. And I wish…
Original by Stew675 modified for a better redirect of airflow by adding internal ducts, slightly adjusting fitment, and beefing up the arms to better prevent deformation from material creep. This should be a bit more effective at…
Fits this housing: https://www.printables.com/model/1453676-dji-o4-o3-lens-mod-housing Still fits the O3 camera. Thanks to LorenzFPV for the alternate versions!
I made this mod mainly due to the fact that razors with contoured handles tend to twist sideways and slip through the gap. The added notch helps prevent this.
Printed with White PLA+ eSun (230°/60°) on a Creality Ender 3 V3 SE. The goal was to make a first prototype before doing it in PETG or another material more suitable for a computer piece. For now it fits very well and can hold fans. I…
I love Prusa Research, their company philosophy and mindset. However, I do like my printers clean and logo free though, so i adapted my top mounted LCD to not show any logos. I also deletd the speaker cutouts, as the speaker is already…
It fits almost perfectly with my power cable (photos) i THINK if you have a diffrent cable it will fit better. I recommend to print it with PET-G for stability. If you have problems with putting it on your table, try making some lines…
its a pip sword segemented.
This is small mod of file stealthburner_printhead_dragon_rear_cw2 from orginal Stealthburner head, for fit with Voron Tap module. where four screws, mounting vertical MGN9 carriage, interfere with printhead rear housing. The one and only…
Small improvements that I found helped with RapidMonster's model: Geneva_Driven - Shortened so it does not protrude past the Central Gear. This stops looser bearings from popping out during assembly on a flat surface. The hole for the…
This is an OpenSCAD model that generates custom wall plates in any single and multi-gang combination: Blank Toggle Switch (Takes up entire plate) Duplex Outlet (Takes up entire plate) Rocker/Decora Plate (Takes up entire plate) Keystone…
Updated to print in less than 2hrs. Cleaned up to handle 8.5x11 sheet of transparency film and a change to the bottom support to accept the thin film. Uses 3 hooks so that a paper hole puncher can be used on the shield transparencies.…
my first upload i apologize if ive made any mistakes and welcome advice from anyone more experienced, this is a great design by someone else ive adjusted to meet my requirements maybe it'll be useful to someone else
PubHubs (PublicHubs) Features -These blocks provide 11mm of lift/lower (flip block over for lowering) and can ride stock height -Cooling fins (how effective are they really? idk they look cool) -Due to being open source, can be customized…
This is a variation of Gennro's ATX PSU Bazzite Box design. The project files include: Raised letting that can be printed in a different color. A STEP file for you to add any lettering or designs if needed. Double fan side Mount (this is…
this model of a modded corvette stingray is based on one i have in nfs unbound.
For Hyper PLA cardboard spool adapter for K2 Plus CFS Just tear off oneflange of the cardboard spool : Place printed flange and attach the wire on it: Turn and tear off the other side of cardboard spool and place the other printed flange…
This design is a remix of Magne's “Weekclock with planetary gear" . I had some issues with the original design files (especially it did not fit my clockworks…), so I made some modifications and decided to publish the result here. Changes…
Remix: removed clips added cap collar to hold parts together slight geometry tweaks to allow easier printing (print both parts laying horizontally, with supports for 'cap' for screw gap and collar) Category: Hand Tools
I've fixed the funnel at the bottom of the MEGA version, since it had a step in it that required supports to be printed correctly and prevented the correct sealing via o-ring. Print it as per Sillybutts instructions: 5 walls and 15% infill.
This is a lengthened Silly SCAR that allows you to fire Mega darts instead of Mega XL! Why? Well, because I like my faux “suppressors”, and I have a ton of Mega darts and basically no Mega XL. And hey, your gamemode may use Mega XL as a…
All credit goes to Josef Prusa and his team or whoever create this RamBo board cover for the Original Prusa i3 MK2S. I pretty much just extend all the vent holes on the cover for maximum cooling for the RamBo board. Therefore, it should…
Based upon another model but I built this version from the ground up: https://www.printables.com/model/925614-cr2-wired-battery-replacement This variant has 2 separated entry points of the cables, less shorting. I've adjusted the…
Loved the simple and solid design that Mulilla made, but I found that the left locking tab was very delicate. I replaced the tab with a thicker tab, without the locking knob. The locking function isn't needed anyhow and now the tab is…
Ultra small Pocket antenna mod. Does not use the original antenna, use spare from ELRS receiver. Back clips into place. Print in ABS or better.
Modded top for MiSTer case V2 Taki Udon Mega Pack version. Added Mister Logo
Video https://www.reddit.com/r/ErgoMechKeyboards/comments/1lfq5bh/modded_naya_wip/ Naya Keycaps – Original Designs These keycaps were created from scratch for the Naya, a custom ergonomic split keyboard. They’re uniquely shaped to fit the…
Changed some settings so i could print it on a 300x300 printer (K1 Max) faster with less glueing
Camar/Forest 801 cabinet hanger covers modified to be longer and with wider skirt. I printed mine with PLA, standing on the skirt using tree support. Step file attached so everyone can tailor for own needs.
I modded the original design to taper towards the top to better fit a Chinese stealth bomber frame profile. This is mounted on the underside near the forks. Using a SVMC72150 controller. I also increased the height of the base piece by…
I used the original step files from Ratrig to create this mod. It was hard to get the magnets into the stock magnet mounts for all front / top panels. So I decided to make them “enclosed” to the printed files. I printed the parts with…
This is a modded gearbox for the SandPiper 1:8 (by Black Crow) to fit a SCT Sidewinder. This motor is high KV (3800), so i run and 2S, with greater gear ratio, and smaller 95mm tires. With this configuration, this is drivable, the motor…
All credit goes to Josef Prusa and his team or whoever create this RamBo board cover for the Original Prusa i3 MK2. I pretty much just extend all the vent holes on the cover for maximum cooling for the RamBo board. Therefore, it should…
NOTE: although this design works very well, there is a new revised version of it at https://www.thingiverse.com/thing:3687678 , with more flexible options for the duct and overall orientation. I'd recommend using the new version if you…
I never liked the shroud that came with my V-minion kit. It was flimsy and small. I took one of the simplest designs found on the EVA 3 page and modified to fit the EVA 2 carriage. It's a lot sturdier and works with the 2 color designs. I…
Support for fixing the MMU buffer on top of the Enclosure. Top plug with 5 holes for the filament pipes.
Had to move the two mounting holes over 1.5mm so that this shroud could live nicely with my BL-Touch mount - other than that, it works great. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .2…
Apart from making the middle part thicker I took used the pinmod and m4 mod from these people. Putting in in one download. 5mm carbon rod 2.5cm long can be inserted and the tension pulls it behind the ridges making sure they won't come…
This part relocates the cr-touch probe so there is no longer a y-offset between nozzle and probe. Zero y-offset means no movement of the bed during probing, which should result in a more precise mesh. This will only work if you've already…
the Only Hiby Case i found for 3d printing. thought it was an awesome case but than thought it would be kool to see the lower half of the player too. I like how the back of the player looks so i removed the lower part. I had no idea how…
Display Mount for the V0.2 R1 I added extra length to the top part of the Mount as the original did not fill the small gap between the frame and display. helps to give a super clean look.
No instructions as this is a mod from another listing. The only thing I would recommend would be to us flat screws so the heads don't stick out and possibly interfere with the chain. If possible. See the other persons 45 degree cut photo.…
Slightly modded version, added some holes and removed the integrated fan guard. Category: Electronics
Here is the step file from my modded V-Core 3.1. All mods are in the component “Grizzly mods” 01: CPAP CNC - I already uploaded this mod, you can find it here…
Search for: N2830 11 1000KV 270W on ebay or AliExpress. on: https://bitbucket.org/compactpcbmaker/cpcbm based on: https://bitbucket.org/compactpcbmaker/cpcbm/src/master/mechanics/head/head_4p2.stp Modded Source file will follow when…
All files are based on the originals provided by the manufacturer. When printing, follow the Letter-Number code format (e.g. A1, A2). If a code appears more than once, you must choose which version you want to use. When more than one copy…
Use the spacers to keep the mounting boards high enough to clear the lower fan. Added a mounting board for bitaxe gamma with holes to mount 40mm fan on back using 3mm screws.
Another in my series for makers to earn achievements for their dedication to 3D printing. Model prints with 10% infill. Supports recommended for the the trophy, arms, ribbon and star. Arms recommended to be printed upside down and…
I liked the slim design of PJR's build, but to fit it on my ender 3 backplate i had to modify the fit. My ender 3 has 2 posts for fixing the original hot end in place and the holes on the back of the slim weren't deep enough or wide…
Added funnel on top for easier dice throw. Made slighty larger.
There are different models included. keep in mind that you need to use long keys to install the bolts. this is a modded version of Umbraged Whisper shroud. since I liked the look of it a lot. there are besides the different top rail…
After I bought the RetroCultMods solderless kit, I got tired of seeing the cable hang out of the big square hole where the RJ11 port used to be. So I decided to design this to solve that problem. I used the original screws that came with…
Just posting my modded centauri carbon , would be cool to see your guys modded centauri carbon in the makes / comments , all creators have been credited below , im just posting how my carbon looks , i do not claim to be the original…
As i was helping and working with Cronis on his mod, we had some different ideas on some parts. We agreed that i will make my modded parts as public available remix of his mod. As we both will continue to work on his great mod, we will…
The original model of the Mega Modded Silly Scar only came in a 3 line version, so I added a 6 line version using the Silly Scar Simple Redesign model. I have had great success using the 15% infill, 5 walls profile recommended by the…
Estes 2003 SDI Satellite Kit Nose Cone modded for printability Should be the original scale. separated into pieces and threading added. no support needed I print with 3 top 3 bottom 0.2mm layers 2 walls 5-10% infill (as light as you can…
After adding this mod to my Aoostar WTR Pro cluster (https://www.printables.com/model/1329348-modded-back-for-aoostar-wtr-pro-with-noctua-high-e) to the back of the units, I was left with the 4 original fans without use, so I decided to…
The top cover will need to be downloaded from the original model. I mainly redesigned this case to allow me to adjust the brightness of the LEDs with a button on the side and provide some mounting options for the arduino nano. PCB Design…
Original creator is MIHAI_T here in Printables. I only had M4 nuts and bolts lying around so I remixed the files to take M4 instead of M3. Honestly I should've just scaled it, it's a pretty small drawer, but to those who liked the…
Modded Feet Connector with Wire Pass Through and attachment for helping hand arm.
WMP1M - WiiMote Pistol V1.1 Modded - The Nintendo Fan With The Golden Gun As a follow up to the previous post, here I am going crazy with a modded version. Like the original, you only need the body and trigger parts for it to function,…
The original model allowed the antenna to flop out and I wanted the antenna to stay internally, so I modified the design to fully encapsulate it. The added fins are to make it able to take more force since it needs to be printed…
I really liked Badkitty's version of the Jedi Holocron (also credit to Hambone211 for the original side panels modified by Badkitty!) with it's simple interlocking design, but for a little side project, I wanted to combine it with the…
in case you like to give this part a different look. I personally like the M2 model it assembles the same way as the original model. --------- print settings fallow the PDF for print settings but you might want to print the M2 model from…
I Printed on an elegoo century carbon 2 Printed with a 0.4 mm nozzle Printed in Elegoo PETG - CF / Main Bed, Gooseneck, Backend, Wheels, Test Block Elegoo TPU 95A / Tiers, Mudflaps Elegoo Rapid PETG / Everything else Hardware 6 2M x 6mm…
“The Filter” mod for Mk3s Credit for original model goes to nateb16 , mod posted with permission. Video Wanted to share my progress on a small filter mod I’ve been working on for my Mk3s. It is based on The Filter for Voron printers. I…
After trying a lot ( and I mean a lot ) of fan ducts for my HyperCube Evolution and never being 100% satisfied I decided to mod the one that was working the best so far to work just a little bit better. I had used the semi-circular fan…
The original Arianeplast spool is based on the bambulab spool for their refills. The difference is that it uses zip ties instead of glued ribbons which are way thinner. So this remix is meant for easier removing of the zip ties. Note:…
This base plate mod is an evolution of the exisiting crux35 frame, with a bit more structure added. The exisiting v1 crux35 frame has a couple notable weakspots that were prone to break in a crash. This model aims to fix those issues.…
I have at least one modded foam dart ("Nerf" style) blaster using an aftermarket barrel, and which is firing accurately enough that I do not feel it necessary to use a “SCAR” barrel specifically. Therefore, I came up with this model so…
Modded it to match the short barrel just trimmed a lil off the bottom
I really like this design since I've had all three mmu units. another reason was I wanted an orange label plate since I chose to print my mmu3 in orange like the first one I got years ago. the first one i printed was text up and i feel…
the idea of this mod is to make the parts slightly stronger. so there is less chance of the hole ripping open wile screwing in the bolt. you should not need to have to heat the bolt for this model. so less chance of deformation. also keep…
The print files use organic support settings that work well with TPU. Sadly, I no longer have the Fusion 360 files, but if somebody wants to recreate them I'd be more than happy to add them to the file list.
I started with cobaltjeh's insert but had an issue with my sleeved cards. I'm using orange Mayday Standard USA Chimera premium sleeves, and they were just a tad too big to fit seamlessly. I also had a problem getting the last couple of…
Only mounting holes added, nothing more
Adjusted space for vat container + squere hole for aluminium profile 2020
this is the shroud set based on the FGC-9 shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker. this is a…
The mount for the rapido hotend has a notch at the top right hand side, so in order for that to fit, the front mount needed an indent.
I modded the body to match both the barrels. just a lil trim
