poorly modeled Hose pummel
You probably won't even have the hose necessary to fit it onto.
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
- Downloads
- 11
- Likes
- 0
- Rating
- 0
73 models
You probably won't even have the hose necessary to fit it onto.
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
This was inspired by the original Laundry Detergent Cup Drain and modeled from scratch in Fusion 360. As is, it fits the new Tide bottle, but the model is fully parametric and therefore can be adjusted to fit other detergent brands. It…
After printing hundreds of originals, I decided to re-model it myself to make some small tweaks and changes. The original OpenSCAD code resulted in slightly misaligned tolerances, needing the tolerance to need to be set higher than…
I needed a good looking and realistically sized and shaped model of a horseshoe for a different project and after a hour of unsuccessful searching and printing I designed my own. I used a rather old and worn horseshoe from my girlfriends…
I used blender to make the original model more like actual dogs (and especially my own). Smaller snout, less pronounced eyebrows, thinner paws and legs, more wavy hair on the back. That's most of the changes I made. I printed mine small…
This is a specially redesigned (MK4S @Prusa3d) 360-degree cooling system for the MK3. It is not a scaled-down copy of the version for the MK4S. This mod uses the original fan for the MK3S: 5015. The mod requires printing only four…
Tennis Racquets have a buttcap (butt cap) placed over the pallets on the handle of the racquet. This is modeled after the buttcap from a Head Boom MP. You can also resize the model in Onshape which has a free license available (anything…
Note, I posted this on Thingiverse as a remix here: https://www.thingiverse.com/thing:5438660 but had a problem associating it with my list of account models there so I moved it to Printables. -- Remixed only from the OBJ files posted by…
Presenting the rocket ship from Myst! Although I labeled this (for attribution purposes) as a remix of the rocket published by Cyan_Inc, I've actually remodeled it from scratch specifically for 3D printing. The rocket prints without…
Edit: 30Oct20 - Found a great monitor/screen for this MFD (since it's bigger than the TM Cougar MFD's) cheap and minimum wasted viewing area https://www.aliexpress.com/item/32325920866.html?spm=a2g0s.9042311.0.0.5c074c4dyytB9m Edited:…
Had a great Saturday scanning The Art Institute of Chicago with Tom Burtonwood . Here's one of the scans we captured with the Sense Scanner . More information about the scanned sculpture can be found below. Lincoln.obj is the original…
this case is based on my own smartphone design symetium which i attempted at releasing a few years back but it eventually fell through, i had many investment offers but many backed out once they found out there was no prototype, this case…
Original model wasn't showing as watertight and had lots of holes so if you have issues slicing that 3mf try this one. Recommend 3 or 4 for max stability but only 1 is modeled so replicate as necessary.
Allows you to adapt your Dyson V7-8 to use an Ozito battery and the original wall mount. (Not the charger)
Not very classic representation of retro space ship with changeable parts for design selection. This model contain native support structure, you don't need to generate support in slicer. Support part can be removed with a flush cutter.…
This is a carefully modeled 2×4 brick, designed in Fusion 360 with attention to authentic LEGO proportions and details. High accuracy: Dimensions follow the official LEGO system scale, including correct stud pitch and wall thickness.…
Fun little pug remodeled to be more flexible and easier to print multicolor. You can print it with any material. At 100% scale it takes around 40mins to print. For best results with multicolor I recommend splitting the mesh to parts in…
Voron Trident skirts with a modeled in hexagon mesh pattern that is symmetrical within the larger hexes. 2025-11-28 Fix front right skirt to have correct VORON Logo. 2026-06-19 Hexagons are now centered within each hexagon instead of…
Replacement clips for a hand rail of a steel wall swimming pool. There are two variations: The original one recreated (the blue one in the pictures). One with a little hook to hold for example a thermomenter. Instructions I printed it in…
I found slider parts a bit loose and re-modeled those. Also I used 10mm magnets instead of author's 8mm
Prints in two pieces that thread together after securing your blind string. Instructions in photos. string hole diameter: 2.5mm. No support material recommended. I like to use a height range modifier in PrusaSlicer to reduce the print…
lay all files flat in slicer, move for best space conservation at 30 or 25% of total size, use highest quality setting, and lower speed, recommend 40mm/s.
It is better to print it with structure
This 3D model of the "D" letter keychain is designed with precision to combine style and practicality. Its clean, curved design makes it an ideal accessory for keys, bags, or as a unique gift. Compatible with most 3D printers, this…
20% infill, PLA is ok about 50C without problem, 0,4 mm nozzle
Check out my Amazon Page to see what kind of gear I use to make these models! Hey! It's me! This was my first 3D printing-related project, and I documented the entire process here:…
Since the corona virus outbreak I have placed soap dishes at every sink in our household. But why yet another soap dish design? This one is modeled 100% PrusaSlicer. Both posing as a showcase for what can be done with all of its great…
This is a fan shaped Knob. Its Modeled after the Fan of the PW1100G turbo fan engine. I've uploaded a test-file so you can test which inner-diameter fits best for you. No Support needed.
Voron 2.4r2 skirts with a modeled in hexagon mesh pattern that is symmetrical within the larger hexes. 2026-07-01 Hexagons are now centered within each hexagon instead of being based off one and patterned across piece Hex size changed…
Adapter for mounting a microphone with a 5/8"-27 UNS thread (Shure SM7B and most professional mics) on a camera tripod, light stand, or boom arm with a standard 1/4"-20 UNC thread. Specs: Bottom: 1/4-20 UNC female - screws onto a camera…
This is a Baratza/Mahlkonig Vario/Forte mod on the single dose hopper. I have attempted to fix the issue where the tolerance of the mating area of the hopper and upper burr carrier would result in chaff blowing back into the grinder. The…
Modified Fillet Radiuses for Easier Printing. Modeled in multi-color trim with draft vs painted on in slicer.
Inspired in other models in printables I made from scratch a small and discrete magnetic fidget that is modeled for 3.18mm tall x 4.77mm diameter magnets. The magnets have a tight fit due to the different magnet positions, you can place…
Had a great Saturday scanning The Art Institute of Chicago with Tom Burtonwood . Here's one of the scans we captured with the Sense Scanner . More information about the scanned sculpture can be found below. Zenobia.obj is the original…
This remix has a larger inner diameter to accomodate a bigger mag safe charger. Charger dims: 61mm diameter x 8mm tall Charger it is deisnged for: https://www.amazon.com/dp/B09HBFNQBR?ref=ppx_yo2ov_dt_b_product_details&th=1
according to my son the round buttons on the front are supposed to be fingerprint readers to unlock the suitcase :-) Category: Toy & Game Accessories
A complete ground-up remodel of the legendary RS Watanabe 8-spoke wheels, specifically adapted for 1/10 scale RC drift and touring chassis. Instead of simply scaling down a 3D scan or mesh (which leads to paper-thin structures and…
I grabbed this geometry and remodeled it, extruding the walls deep enough to accommodate our sunglasses and eyeglasses.
I dont know what to put here execpt on why i need to remove this once eaadan starts selling print settings: support:tree angle: either 20 or 0 inffil: 100% for the rotors and housing everything else 50-20% Credits to u/WeirdcoreKing for…
This is a variation of OpenLock tiles but changed to fit in magnets instead. Magnet side used D3mm x 6mm
the side of the trigger had some proud faces around the hardware so I brought all of the side faces to the same level
as mentioned, I could not remix ‘ MINIMALIST WALL HOOK’ by MdeMAKER as it was not allowed I decided to make my own model with better tolerances. Feel free to give me any feedback and I will update the model!
The Gazometro of Rome , located in the Ostiense district, is an imposing industrial structure and a symbol of 20th-century architecture. Completed in 1937, the structure was part of a complex of tanks used to store gas produced by the…
If you have a xd motor like me this is a remodeled one i kept these for my self but here you go STH-10 GE MOTOR COVER IS IN MY PROFILE
Two close friends had a travel themed wedding and asked me to 3D print centerpieces based on different countries that they had visited including Austria. Based on the scan of the front surface that usharingan uploaded to Thingiverse, I…
This is a variation of openlock tiles but changed to fit in magnets instead magnet side used D3mm x 6mm
This is my remix of the 4runner/FJCruiser shift knob by Breynolds84. I also made a smaller transfer case knob to match. Highly recommend using TPU 64D or similar for the transfer case knob. I printed it in ASA first and it came out…
ant a8 plus dressup kit addon for y axis belt tensioner made by FaultedLogic.
Credits to @FanbloxCompany for the spined torso, head, and joint models. Credits to @YourLocalWalmart for the Script Builder John Doe corrupted spike arm. Also, don't judge the model, I am new to making these. Sorry, but the image is a…
I didn't get the photo before giving to Chris, I'll try to get one next time I see him. I modeled it all in the slicer except for the “crazy” icon. I used gold silk PLA for the lettering and turned on ironing, came out nice.
A yamaha B2 piano (kinda). Based off of it.
Modeled this in PrusaSlicer using only spheres with cuts and a text object
Hanging tablet holder designed for suna. Fits all 11'' tablets or smaller.Hanging tablet holder designed for suna. Fits all 11'' tablets or smaller. I installed hook on top of the sauna on that I hanged holder. There is 1,5mm hole under…
A strange round thing I modeled when I was bored.
I added his Tie and flattened the back so that it could be placed flat. Though it is not the same size as the.
I remodeled the popular NASA hex piece to greatly simplify the geometry. The original design was not mine, this was my inspired take created in blender. I have included a single instance plus a quad version to make it easier for…
my make is chopped dont flame me i still need to calibrate my filament 😭 new nozzle
I designed this hanging underdesk glue gun holder for my daughter to keep her gluegun off of her desk surface. I went with an aero style design for both aesthetics and strength. There are two model files included. One is split to print as…
## Design Concept This model is designed to replicate a classic glass soda bottle, using smooth curves and distinctive bulges typical of a vintage soda bottle design. The model is structured with precise geometry to highlight the iconic…
Anti-skid pad for a small desk organizer modeled by Robert Rose But plastic slides easily on my desktop. TPU pad to the rescue. So I modeled up a couple of models, one for ver. 1 and 1 for ver. 2 I used Polymaker TPU and they turned out…
Ikea Värdera Mug modeled after
I've been wanting to print the MHQ2 multi copter for a while now. My printer ( Prusa Air 2) and extruder set up only allow for a max build of X 191 & Y 195 and even the MHQ "short" version wouldn't fit on my build plate. So i have re…
Hello, ^-^ Here I modeled the chair from the Mel Brooks movie. :) Or rather, I recreated it. It prints pretty well with just a few supports. ^^ Perfect for puppets or, in a larger size, for 3D printing enthusiasts. 😁 Whatever you prefer.…
Hanging tablet holder designed for suna. Fits all 11'' tablets or smaller.Hanging tablet holder designed for suna. Fits all 11'' tablets or smaller. I installed hook on top of the sauna on that I hanged holder. There is 1,5mm hole under…
my make is chopped dont flame me i still need to calibrate my filament 😭 new nozzle
This is a Baratza/Mahlkonig Vario/Forte mod on the single dose hopper. I have attempted to fix the issue where the tolerance of the mating area of the hopper and upper burr carrier would result in chaff blowing back into the grinder. The…
A remix of alpokemon's Nostromo Alien SpaceShip, available here , as the original STL was full of slicing errors which made the file unusable. I have fixed the main issue of the right engine being completely hollow in meshmixer by…